I recently port my cooked rom to use WM6.5.5. It's all well except that I noticed that the colour of icons from RSS Hub become washed out. (see attached)
I flash back my older ROM that uses WM6.5, the icons appear to be okay. So it looks like it's a 6.5.5 fault. Anybody can confirm?
nobody has this issue?
zenkinz said:
nobody has this issue?
Click to expand...
Click to collapse
+1 I am having this problem too, since moved to 2355x from 2189x branch, and favorites & go button in pocket IE have the problem either... dunno have the idea why it happened...
anybody has a suggestion or solution ?
thanks
What version you're using?
seal_team_six said:
+1 I am having this problem too, since moved to 2355x from 2189x branch, and favorites & go button in pocket IE have the problem either... dunno have the idea why it happened...
anybody has a suggestion or solution ?
thanks
Click to expand...
Click to collapse
ok, so I'm not alone. Thought I've done too much clean up that it breaks some stuff like this
TAEL said:
What version you're using?
Click to expand...
Click to collapse
it's 23557
zenkinz said:
ok, so I'm not alone. Thought I've done too much clean up that it breaks some stuff like this
it's 23557
Click to expand...
Click to collapse
My mean was RSS Hub version.
TAEL said:
My mean was RSS Hub version.
Click to expand...
Click to collapse
Hi Tael mine was RSSHub_2_1_2_1109_01, taken from EXT T-Mob 2.10 official ROM for Leo (21895)
Zenkins what yours ver? is it the same version?
seal_team_six said:
Hi Tael mine was RSSHub_2_1_2_1109_01, taken from EXT T-Mob 2.10 official ROM for Leo (21895)
Zenkins what yours ver? is it the same version?
Click to expand...
Click to collapse
yes same version as you. I took it from Leo 2.10 ext package.
what Windows mobile build are you on??
zenkinz said:
yes same version as you. I took it from Leo 2.10 ext package.
what Windows mobile build are you on??
Click to expand...
Click to collapse
yep i'm on build 23557 Same ROM same problem as you anyway the distort problem arise since i used on build 23554
seal_team_six said:
yep i'm on build 23557 Same ROM same problem as you anyway the distort problem arise since i used on build 23554
Click to expand...
Click to collapse
ok, so it's a windows mobile build problem, at least I don't need to check my kitchen to see what causes it
thanks !
I find this problem in all 235xx rom used on Leo...now i use Blackstone with same WM builds and i don't have any icon problem...
Also WM Calendar upper icons are distorced on HD2 with this builds.
Did anybody fix this problem? My icons in RSS Hub and Internet Explorer are distorted.
supps2 said:
Did anybody fix this problem? My icons in RSS Hub and Internet Explorer are distorted.
Click to expand...
Click to collapse
internet explorer can be fixed by this.
for rss, I noticed that if I run the app right after the soft reset, it'll not have problem
zenkinz said:
internet explorer can be fixed by this.
for rss, I noticed that if I run the app right after the soft reset, it'll not have problem
Click to expand...
Click to collapse
Thank you, that fixed IE but my RSS Hub is still distorted. Will keep looking.
Thanks
supps2 said:
Thank you, that fixed IE but my RSS Hub is still distorted. Will keep looking.
Thanks
Click to expand...
Click to collapse
FInd the RSS hub resource DLLs in RSS's package and try editing those BMPs as well
NRGZ28 said:
FInd the RSS hub resource DLLs in RSS's package and try editing those BMPs as well
Click to expand...
Click to collapse
I tried, the bmp looks ok. and the thing is the same package works well in the com2 branch so I think its not the issue with RSS hub.
or have you find something on your end?
I found that if I recmod the browsres.192.dll it fixes the graphics without having to do anything extra.... Weird!
NRGZ28 said:
I found that if I recmod the browsres.192.dll it fixes the graphics without having to do anything extra.... Weird!
Click to expand...
Click to collapse
do you mean that recmod browsres will fix the rss icon problem as well? I'm going to try. Thanks!
I have this on RSS Hub as well.. same version but on 23653...
I fixed Internet Explorer Low Res Icons by using IE from 23115...
The "Low Res Icons" seems like a WM issue on Leo...
How'd the Recmodding go? Did it sort out the RSS Hub "Inverted Icons" for you?
Related
Hi, I've created this dialer, it is tested on HTC Wizard, but it should work on other devices too. It includes my edited greenbatteryfix6 ( http://forum.xda-developers.com/showthread.php?t=267321&page=5&highlight=greenbatteryfix6 ) too... Just unzip and install attached cab file...
New version: some bugs fixed, removed greenbatteryfix, so it should work on all devices now...
Looks real nice ! thanks ! Looks better than the standard dialer !
Is there a version without some battery fix malarky attatched to it? It's a very nice skin but it's a shame you made it unusable by adding this "fix".
hehe.
Looks like my old good Real Vista E-Ten Skin
download
zamsky1 said:
hehe.
Looks like my old good Real Vista E-Ten Skin
download
Click to expand...
Click to collapse
Except he has SmartDial built in. When will we get an E-Ten with SmartDial built in?
jambaj0e said:
Except he has SmartDial built in. When will we get an E-Ten with SmartDial built in?
Click to expand...
Click to collapse
E-Ten has SmartDial already, check www.paulya.com
Molski
very nice
works on cingular 8125, thanks!!
In qtek 9100 gives error when installing.
Some solution?
Thanks.
cocoepiblas said:
In qtek 9100 gives error when installing.
Some solution?
Thanks.
Click to expand...
Click to collapse
Which rom do you using? It works on 2.x roms (I tested it on 2.21.2.7 and 2.26.10.2)
Jimm98y said:
Which rom do you using? It works on 2.x roms (I tested it on 2.21.2.7 and 2.26.10.2)
Click to expand...
Click to collapse
ROM 2.18.7.8 ESN
RadioROM: 02.47.11
ExtRom: 2.18.7.110
Nice dialer.. ..like the nice clean look of it
Will this work with WM2003se?
Jim:
Thanks for the dialer skin!! Mucho appreciated. I like the fact that it picks up my finger taps much better than the stock skin, and the whole design is very cool looking.
The only thing I noticed that was missing is the headset or 'handsfree' icon that showed up in the stock skin if your headset was connected. Is it possible to add that?
Thanks
Jeff
frigit said:
Will this work with WM2003se?
Click to expand...
Click to collapse
Unfortunatly it will not.
What you could do is search for the xPad Reflex Dialer it looks great! To bad it doesn't work on WM5.0.
neonkoala said:
Is there a version without some battery fix malarky attatched to it? It's a very nice skin but it's a shame you made it unusable by adding this "fix".
Click to expand...
Click to collapse
I can create a version without this fix, but this fix isn't here only for changing batteryicon, but it is for changing images in call history, instead of the blue pictures, there are grey vista icons...
Would this dialer work on the Hermes?
lpsi2000 said:
Would this dialer work on the Hermes?
Click to expand...
Click to collapse
It should work, but the voice call button will be not there...
I've made a new version without battery fix and some other fixes, check the first post...
May I ask in which language you´ve written this? Do you use c++ or the .net compact framework?
Thank you
Dragi
I've made it by editing files from the rom and changing some values in registry. These files are not being written by me....
Is There A Background For all Tabs for The New Updated Manilla That Includes The Weather Clock???
See post 14
http://forum.xda-developers.com/showthread.php?t=572166&highlight=background&page=2
I assume you mean the manila 2.5? There is very little that works well because of the animation. I used HD Walls with manila 2.1 and it worked great. Now that I use manila 2.5 I have not found anything stable to use. There is a program called maxtt that works and still allows weather animation but it kept freezing my programs so i removed it. Both programs were found here on the forum. Hope that helps.
I have tested more than 5 different cabs and tweaks to have my background image in all tabs but none has worked 100% properly...
I´m using latest Energys ROM photon with Manila 2.1
Any advice?
Thanks in advance
There is a cab, But you loose the weather animations on the today page, but other then that is works like a charm.
In short, no there is nothing for Manila 2.1 with weather in clock. If I knew how, I would have created it long time ago...
Thanks zelendel, shame we do not have a full working version
Hope anyone can develop it soon
Anyother option?
Thanks,
orb3000 said:
Thanks zelendel, shame we do not have a full working version
Hope anyone can develop it soon
Anyother option?
Thanks,
Click to expand...
Click to collapse
No Prob but all credit goes to theboostman from THIS post.
I'm not sure if it would work for Rhodium as I made it for Blackstone But it is for manila 2.1 Leo weather Home tab
http://forum.xda-developers.com/showthread.php?t=570322&highlight=Dusk
If someone wants to give it a try and get back to me it would be good to know.
zelendel said:
No Prob but all credit goes to theboostman from THIS post.
Click to expand...
Click to collapse
Thanks mate
Now it´s working perfect!
cheers
zelendel said:
No Prob but all credit goes to theboostman from THIS post.
Click to expand...
Click to collapse
Thanks buddy!
Hi all,
I am trying to install a Transparent Clock but am having little luck.
Ideally I would like the transparent clock w/ weather found here http://forum.xda-developers.com/showthread.php?t=589181
I have tried that one as well as Matt's Crystal Clock. Can't get either to work - my clock does not change (even after soft reset).
I am thinking (but hoping not) it has something to do with my (and sorry I am new to this) windows version and/or manila version and/or TF3D version ???
I have WM6.1, TF3D 2.1.38420.2, and I am sad to say I don't even know how to check what manila I have...
Any help is greatly appreciated!
Thanks,
Ryan
nayr1482 said:
Hi all,
I am trying to install a Transparent Clock but am having little luck.
Ideally I would like the transparent clock w/ weather found here http://forum.xda-developers.com/showthread.php?t=589181
I have tried that one as well as Matt's Crystal Clock. Can't get either to work - my clock does not change (even after soft reset).
I am thinking (but hoping not) it has something to do with my (and sorry I am new to this) windows version and/or manila version and/or TF3D version ???
I have WM6.1, TF3D 2.1.38420.2, and I am sad to say I don't even know how to check what manila I have...
Any help is greatly appreciated!
Thanks,
Ryan
Click to expand...
Click to collapse
what rom are you using? is that a custom rom or stock rom?
stock rom (company phone so...)
I have WM6.1, TF3D 2.1.38420.2, and I am sad to say I don't even know how to check what manila I have...
Click to expand...
Click to collapse
TF3D = Manila
mhurg said:
TF3D = Manila
Click to expand...
Click to collapse
OK, well then I have manila 2.1 correct ??? And from what I have read, manila 2.1 is identifiable from having weather on the HOME screen ???
But I have never had weather on the home tab and have not had any luck getting it to work...any ideas ???
here is the EXACT weather clock that I want - is this possible ???
http://forum.xda-developers.com/showpost.php?p=4934485&postcount=297
If it is a regluar TP2 (unbranded), go to HTC.com and download the WM 6.5 ROM and install it on your phone. That gives you WM 6.5 and a Sense 2.1 (which has the weather clock).
Just make sure you backup your contacts and other info you might need, because it's like formatting a PC - everything gets deleted. It's worth it though and shouldn't take more than 15 mins to do. Then you get your weather clock AND the Crystal Clock CAB will work ;-)
mhurg said:
If it is a regluar TP2 (unbranded), go to HTC.com and download the WM 6.5 ROM and install it on your phone. That gives you WM 6.5 and a Sense 2.1 (which has the weather clock).
Just make sure you backup your contacts and other info you might need, because it's like formatting a PC - everything gets deleted. It's worth it though and shouldn't take more than 15 mins to do. Then you get your weather clock AND the Crystal Clock CAB will work ;-)
Click to expand...
Click to collapse
Hey, thanks a lot. I do not have an unbranded one however, I have Verizon. I checked HTC.com and it says wm6.5 for Verizon will be available in Dec/Jan.
I am assuming I should wait for that or would it be "safe" to download the unbranded one ???
Thanks
Ryan
nayr1482 said:
Hey, thanks a lot. I do not have an unbranded one however, I have Verizon. I checked HTC.com and it says wm6.5 for Verizon will be available in Dec/Jan.
I am assuming I should wait for that or would it be "safe" to download the unbranded one ???
Click to expand...
Click to collapse
Well you could try to find an unofficial ROM here on the forums that might work, but I must admit I haven't tried out any of them myself. Personally I'd just wait the few weeks until the official version was released, but it's up to you
Downloading an unbranded one from HTC.com won't work, however. There is more to it than that - check out the Rhodium ROM forums for more info. Good luck anyway
Install this, soft reset
How come none of the transparent clock, i've installed like 3 of them doesns't work on stock roms (sprint).
I have TF3D 2.1
Am i missing something?
kasim1 said:
How come none of the transparent clock, i've installed like 3 of them doesns't work on stock roms (sprint).
I have TF3D 2.1
Am i missing something?
Click to expand...
Click to collapse
Found it Here on PPCgeeks so many of them. Looks VERY nice !!!
Works with stock Sprint Rom.
can anyone post the manila files for this clock:
http://forum.xda-developers.com/showpost.php?p=4934485&postcount=297
???
if so i can make a cab for everyone!
nayr1482 said:
can anyone post the manila files for this clock:
http://forum.xda-developers.com/showpost.php?p=4934485&postcount=297
???
if so i can make a cab for everyone!
Click to expand...
Click to collapse
Thats not Manila, I think its SPB.
ai6908 said:
Thats not Manila, I think its SPB.
Click to expand...
Click to collapse
i would think that however it is generated, it starts with .png files doesnt it ???
i can work with the manila files or .png
Dear Pals,
Using Biotouch of 6.1 on 6.5 causing msgs when scrolling down and press finger to stop it to move to another box.
Is there a setting that prevent this!!! using biotouch from mega causing audio manager & youtub player to not scroll down correctly.
thx
I'm not 100% sure what biotouch is (it's for finger scrolling, right?), but I'm pretty sure you don't want it with 6.5. I've never used it; 6.5 has native finger scrolling that's better than anything in 6.1. My recommendation is to just dump it.
Farmer Ted said:
I'm not 100% sure what biotouch is (it's for finger scrolling, right?), but I'm pretty sure you don't want it with 6.5. I've never used it; 6.5 has native finger scrolling that's better than anything in 6.1. My recommendation is to just dump it.
Click to expand...
Click to collapse
lol im also using it in my rom will try to remove it andsee if i get better scrolling
Bros,
Removing biotouch will cause to loose the ability to change the sip language from sip menu.
can somebody upload biotouch from iolite kitchen or compatable device for jade??
miniterror said:
lol im also using it in my rom will try to remove it andsee if i get better scrolling
Click to expand...
Click to collapse
yeah, i tested too, but if i removed, HW buttons not working on HD
Wajk said:
yeah, i tested too, but if i removed, HW buttons not working on HD
Click to expand...
Click to collapse
yep you are correct so i put it back in and the biotouch.exe replaced for a dummy .exe
miniterror said:
yep you are correct so i put it back in and the biotouch.exe replaced for a dummy .exe
Click to expand...
Click to collapse
kindly need the steps of how u did this!!
mua30 said:
kindly need the steps of how u did this!!
Click to expand...
Click to collapse
just overwrite the file in youre kitchen with the one attached
miniterror said:
just overwrite the file in youre kitchen with the one attached
Click to expand...
Click to collapse
well, sanks ferry match
really thnx
In my case the dummy doesn't work for the blackstone.
It is required by the biotouch.dll to work. It crashes when you slide pages in the RSS Hub or slide between emails.
Have anyone found a different solution?
ypsmav said:
In my case the dummy doesn't work for the blackstone.
It is required by the biotouch.dll to work. It crashes when you slide pages in the RSS Hub or slide between emails.
Have anyone found a different solution?
Click to expand...
Click to collapse
i know it works for me:-o
i dont have rss hub(i do have a rss program but i think you are reffering to the rss on the home page?) in my roms but i know i can slide left and right in emails to go to the next or previous one and i have it cooked in every rom
I've found the way to use the dummy. I've added the programs which were crashing to the exception list, and problem solved!
One more release for today. Topic subject says it all.
Take a look at readme.txt and terms of usage.
P.S. don't install it on stock roms. It won't work. You've been warned
thanks alot buddy. highly appreciated..
after long time of intense "motivation" by me.. sorry for nagging so much...
enjoy guys and girls
ultrashot said:
One more release for today.
Click to expand...
Click to collapse
This release is not applicable for those funny guys, who continue to fix problems in WM recent builds in a weird way by means of 6.5.5 gwes.exe usage.
you just can't resist andrew....
Wow very good Ultrashot ! Nice day
I like very well the internet icon , have you please in a 256*256 pixels ?
It will be great for me!
Thanks a lot
regards,
Nixeus
Nixeus said:
Wow very good Ultrashot ! Nice day
I like very well the internet icon , have you please in a 256*256 pixels ?
It will be great for me!
Thanks a lot
regards,
Nixeus
Click to expand...
Click to collapse
No, I don't have it. Only in 90x90.
This is awesome. I'm SO glad you're still developing stuff for COM2 as well as COM3. Do you think it's possible to bring the movable shortcut feature from COM3 to COM2? It's like the one thing I really long of other than threaded email, haha.
Very nice piece of work! BTW I really like you background your using. Would you mind uploading it?
stickfigure said:
This is awesome. I'm SO glad you're still developing stuff for COM2 as well as COM3. Do you think it's possible to bring the movable shortcut feature from COM3 to COM2? It's like the one thing I really long of other than threaded email, haha.
Click to expand...
Click to collapse
I think no but I will check if it is possible.
GhostXSeries said:
Very nice piece of work! BTW I really like you background your using. Would you mind uploading it?
Click to expand...
Click to collapse
That's my ROM stuff -> no other kinds of usage.
I tried last night but only got a hardresset. I have 29022 cooked with GhostX 7.0.3 OSkitchen, then I installed NewSDKCerts.cab and do a softresset (OK) then copy shell32.exe from WM6.5.3 folder to windows folder of my HD2, then copy the .cpr files and did a softresset, but the device did not pass of second splash screen. Does it means I have WM6.5.5? Thanks in advance! and thanks for all the work you share!!!
poyensa said:
....29022 cooked with GhostX OSkitchen... Does it means I have WM6.5.5?
Click to expand...
Click to collapse
Exactly
AndrewSh said:
This release is not applicable for those funny guys, who continue to fix problems in WM recent builds in a weird way by means of 6.5.5 gwes.exe usage.
Click to expand...
Click to collapse
that's it...
Take a look at your kitchen files, and see if he has a bold font fix. It he does, then remove that, and use ultrashot fix for bold fonts...
looks great.....
thanks....
Here is my cpr mod to change the layout to 4 grid (7 in landscape).
ai6908 said:
Take a look at your kitchen files, and see if he has a bold font fix. It he does, then remove that, and use ultrashot fix for bold fonts...
Click to expand...
Click to collapse
thanks for the advice ai6, i have unchecked the keyboard font fix with the gwes.exe, then added to the kitchen the utdrv from this link (importing the cab) and i have no bold problem in the keyboard so i understand is working ok.
Then try again the Square Start Menu 6.5.3, but again didnt pass the second splash I have 29022 ... am I missing some thing else? thanks in advance
----
No I cannot get it work I have cooked GhostX rom (29022) without the fix by gwes.es so get the bold issue in keyboard (and dialpad talk button), then I installed utdrv.cab (thx ultrashot for the fix!) and the bold issue is solved, then try again the Square Start Menu 6.5.3, but again didnt pass the second splash
I will keep trying
poyensa said:
thanks for the advice ai6, i have unchecked the keyboard font fix with the gwes.exe, then added to the kitchen the utdrv from this link (importing the cab) and i have no bold problem in the keyboard so i understand is working ok.
Then try again the Square Start Menu 6.5.3, but again didnt pass the second splash I have 29022 ... am I missing some thing else? thanks in advance
----
No I cannot get it work I have cooked GhostX rom (29022) without the fix by gwes.es so get the bold issue in keyboard (and dialpad talk button), then I installed utdrv.cab (thx ultrashot for the fix!) and the bold issue is solved, then try again the Square Start Menu 6.5.3, but again didnt pass the second splash
I will keep trying
Click to expand...
Click to collapse
Yeah, the problem is the same for me... Don't know what is incompatible
Would it be ok for me to use the utdrv.cab in my future oskitchen releases? It looks much more stable than the gwes fix!
Skyguar said:
Yeah, the problem is the same for me... Don't know what is incompatible
Click to expand...
Click to collapse
I did download build 29022 from here, imported with GhostXseries OSkitchen and flashed again new rom, but same results splash screen - leo animated - welcomehead screen - stop ... keep trying tomorrow
Hmmm something to do with the OSKitchen itself then?