Vista Dialer - Windows Mobile Development and Hacking General

Hi, I've created this dialer, it is tested on HTC Wizard, but it should work on other devices too. It includes my edited greenbatteryfix6 ( http://forum.xda-developers.com/showthread.php?t=267321&page=5&highlight=greenbatteryfix6 ) too... Just unzip and install attached cab file...
New version: some bugs fixed, removed greenbatteryfix, so it should work on all devices now...

Looks real nice ! thanks ! Looks better than the standard dialer !

Is there a version without some battery fix malarky attatched to it? It's a very nice skin but it's a shame you made it unusable by adding this "fix".

hehe.
Looks like my old good Real Vista E-Ten Skin
download

zamsky1 said:
hehe.
Looks like my old good Real Vista E-Ten Skin
download
Click to expand...
Click to collapse
Except he has SmartDial built in. When will we get an E-Ten with SmartDial built in?

jambaj0e said:
Except he has SmartDial built in. When will we get an E-Ten with SmartDial built in?
Click to expand...
Click to collapse
E-Ten has SmartDial already, check www.paulya.com
Molski

very nice
works on cingular 8125, thanks!!

In qtek 9100 gives error when installing.
Some solution?
Thanks.

cocoepiblas said:
In qtek 9100 gives error when installing.
Some solution?
Thanks.
Click to expand...
Click to collapse
Which rom do you using? It works on 2.x roms (I tested it on 2.21.2.7 and 2.26.10.2)

Jimm98y said:
Which rom do you using? It works on 2.x roms (I tested it on 2.21.2.7 and 2.26.10.2)
Click to expand...
Click to collapse
ROM 2.18.7.8 ESN
RadioROM: 02.47.11
ExtRom: 2.18.7.110

Nice dialer.. ..like the nice clean look of it

Will this work with WM2003se?

Jim:
Thanks for the dialer skin!! Mucho appreciated. I like the fact that it picks up my finger taps much better than the stock skin, and the whole design is very cool looking.
The only thing I noticed that was missing is the headset or 'handsfree' icon that showed up in the stock skin if your headset was connected. Is it possible to add that?
Thanks
Jeff

frigit said:
Will this work with WM2003se?
Click to expand...
Click to collapse
Unfortunatly it will not.
What you could do is search for the xPad Reflex Dialer it looks great! To bad it doesn't work on WM5.0.

neonkoala said:
Is there a version without some battery fix malarky attatched to it? It's a very nice skin but it's a shame you made it unusable by adding this "fix".
Click to expand...
Click to collapse
I can create a version without this fix, but this fix isn't here only for changing batteryicon, but it is for changing images in call history, instead of the blue pictures, there are grey vista icons...

Would this dialer work on the Hermes?

lpsi2000 said:
Would this dialer work on the Hermes?
Click to expand...
Click to collapse
It should work, but the voice call button will be not there...

I've made a new version without battery fix and some other fixes, check the first post...

May I ask in which language you´ve written this? Do you use c++ or the .net compact framework?
Thank you
Dragi

I've made it by editing files from the rom and changing some values in registry. These files are not being written by me....

Related

Keyboard skins for WM2003SE devices (updated Feb. 01 2005)

Hi,
here's the keyboard skin replacement for WM2003SE WWE devices.
It will not work on non SE operating system.
If you want the same thing for non SE OS, let me know.
Uninstall:
As the mui file is used by the system, it is locked. That means if you want to uninstall these skins, first rename \windows\msim.96.dll.0409.mui to something else and restart.
After that you can uninstall it or install another skin.
There is also an option to skin "Block Recogniser" and "Letter Recogniser" as well... however it is not implemented in this version.
If anyone will be interested to have those two skinned as well, please let me know.
This .cab file is using the "Default_Keyboard" skin.
Additional skin previews are below.
If someone want to have some of those other skins, please let me know. I will generate appropriate installer on demand.
The same rule ) is valid for other than WWE OS languge versions...
I am not author of these skins. For authors/copyright please have a look here:
http://www.lakeridgesoftware.com/forum/viewtopic.php?t=1293
buzz[/b]
Hi Buzz,
that looks great! Is it possible to change the layout to german somehow?
Until now I'm stucked to commercial keyboards... :-(
keyboard skins
Can I have all please?
Does this work on JAM devices?
calvin42 said:
Hi Buzz,
that looks great! Is it possible to change the layout to german somehow?
Until now I'm stucked to commercial keyboards... :-(
Click to expand...
Click to collapse
well, but U are running WWE as I can see.. so if i will change the layout to german, then I'm not sure if it will work. You will also need to remap the keys. But anyhow, i will take a look at it.
buzz
Re: keyboard skins
twinkle said:
Can I have all please?
Click to expand...
Click to collapse
sure, but not so fast... sorry, i also have other things to do...
I will do them one by one...
buzz
ant said:
Does this work on JAM devices?
Click to expand...
Click to collapse
probably yes, just give it a try...
I don't have a JAM, so no way 4 me to test it...
buzz
Re: Keyboard skins for WM2003SE devices
buzz_lightyear said:
Hi,
here's the keyboard skin replacement for WM2003SE WWE devices.
It will not work on non SE operating system.
If you want the same thing for non SE OS, let me know.
There is also an option to skin "Block Recogniser" and "Letter Recogniser" as well... however it is not implemented in this version.
If anyone will be interested to have those two skinned as well, please let me know.
This .cab file is using the "Default_Keyboard" skin.
Additional skin previews are below.
If someone want to have some of those other skins, please let me know. I will generate appropriate installer on demand.
The same rule ) is valid for other than WWE OS languge versions...
I am not author of these skins. For authors/copyright please have a look here:
http://www.lakeridgesoftware.com/forum/viewtopic.php?t=1293
buzz
Click to expand...
Click to collapse
Could You POst a .cab with the FACTORY keyboard skin?
Re: Keyboard skins for WM2003SE devices
babj615 said:
Could You POst a .cab with the FACTORY keyboard skin?
Click to expand...
Click to collapse
What do you mean by FACTORY?
Did you mean the default look of the keyboard? Not skinned?
If this is the case, then you can delete/rename "msim.96.dll.0409.mui" from \windows directory...
But, well, I can create that one as well..
buzz
Re: Keyboard skins for WM2003SE devices
Can you post the CAB for the Milk Skin layout?
Hey Buzz,
That's pretty cool, nice one! I'd like them all too and skins for the letter recogniser, I'm sure you'll do them all at some point. Till then keep it up!
Cheers
hshortt said:
Hey Buzz,
That's pretty cool, nice one! I'd like them all too and skins for the letter recogniser, I'm sure you'll do them all at some point. Till then keep it up!
Cheers
Click to expand...
Click to collapse
THANX Howard (old skinner ))) )
...will do them all...
buzz
I had to do a hard reset after installing this cab..
This might be because I had a scandinavian keyboard patch installed..?
Sorry, I don't understand.
Buzz_lightyear said that "I am not author of these skins. For authors/copyright please have a look here:
http://www.lakeridgesoftware.com/forum/viewtopic.php?t=1293"
and "here's the keyboard skin replacement for WM2003SE WWE devices.
It will not work on non SE operating system".
But this is what Bibi author said on Lakeridge Software Forum:
"To use these skins you must have a PPC device running WM2003 with an ENG(lish) ROM (PPC2002 and WM2003SE devices are not-supported)".
Does the keyboard skin support WM2003SE?
Pocket Me said:
Sorry, I don't understand.
Buzz_lightyear said that "I am not author of these skins. For authors/copyright please have a look here:
http://www.lakeridgesoftware.com/forum/viewtopic.php?t=1293"
and "here's the keyboard skin replacement for WM2003SE WWE devices.
It will not work on non SE operating system".
But this is what Bibi author said on Lakeridge Software Forum:
"To use these skins you must have a PPC device running WM2003 with an ENG(lish) ROM (PPC2002 and WM2003SE devices are not-supported)".
Does the keyboard skin support WM2003SE?
Click to expand...
Click to collapse
well, actually, I took the bitmaps out of their skins and i'm porting them to be compatible with WM2003SE. I mean, creating appropriate mui-s for SE.
That's why I said, that i'm not the author of the skin bitmaps/ideas/whateverelse/graphicdesign/...
Those skin mui-s published on their site are not WM2003SE compatible.
However, mine do.
Skinning the keyboard is just replacing bitmaps in .dll files directly or through MultilanguageUserInterface extensions....
hope it's clear now )
buzz
BLKS
buzz anyway to port these skins Bro?
Grey
OSX Blue Label
OSX Graphite Label
OSX Aqua
Crystal Blue
TIA.
Re: BLKS
[Krueger said:
Dr.Stein]buzz anyway to port these skins Bro?
Grey
OSX Blue Label
OSX Graphite Label
OSX Aqua
Crystal Blue
TIA.
Click to expand...
Click to collapse
gimme few minutes...
buzz
Re: BLKS
[Krueger said:
Dr.Stein]buzz anyway to port these skins Bro?
Grey
OSX Blue Label
OSX Graphite Label
OSX Aqua
Crystal Blue
TIA.
Click to expand...
Click to collapse
done deal mate...
that's it for this week.
have a nice weekend...
buzz
I installed one of the skins on my imate-JAM. It works just fine, but i don't see the number keys.
Instead i have a key marked "123" next to the Q. when I press it I get another keyboard that shows the numbers.
How do I get the keyboard to display the numbers above the letters?
Thank You
Thanks buzz you are the Man!
Sorry Bro but can you confirm the Grey skin isn't showing as Grey.

Updated: Combo HTC 3G Dialer and SmartDial (3 April 2009)

Have you been getting frustrated with some of the dialers that after you install, either the screen will look funny (see first picture) or smartdial menu is not appearing?
Well, after many testing, I have managed to find the solution to make it work. The skins I used for this 3G combo dialer comes from bluemetalaxe and sakajati. Special thanks to both of them for their skins.
I only have a Kaiser, so not too sure if it will work for other phones. Do let me know if it works for other phones. Note that the new skins is only for portrait, not landscape. For landscape, it is the default from HTC. Hopefully, I can get some skins for landscape to add into the cabs.
Enjoy:
Steps to make it work:
1. SR your device.
2. Use a registry editor to delete the following registry. Note that some of the registry keys cannot be deleted the first time round, so after you have finished the list, do a SR and repeat the deleting of registry keys.
3. Do another SR and install the smartdial cab. Next install the 3G dialer cab.
4. Copy the white background video buttons from this link (http://forum.xda-developers.com/showpost.php?p=3486541&postcount=36) to \Windows. (New screen capture had been added).
5. SR and you should have a working 3G dialer.
Registry Keys List:
HKCU:
HKCU\ControlPanel\Phone
HKCU\ControlPanel\Sounds\VTAlerting
HKLM:
HKLM\Security\Phone
HKLM\Security\ResOver
HKLM\Software\HTC\3GVTEngine
HKLM\Software\HTC\ConcurrenceMgr
HKLM\Software\HTC\HTCSDKVTCodec
HKLM\Software\HTC\Phone
HKLM\Software\HTC\PhoneCanvas
HKLM\Software\HTC\SmartDialing
HKLM\Software\Microsoft\DialParser
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\AppView
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\Contacts
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\Phone
HKLM\OEM\MASD\Phone_Canvas
HKLM\OEM\MASD\VideoTelephony
HKLM\OEM\MASD\Smartdialing
Reserved for future needs
great work look nice
congratulation for your dialer
great work, i've been searching for this for long timee.. thx dude
I Like you dialer
SmartDialer work fine
I didn't have 3g connection right now, so I don't know it's work or not.
I didn't edit any registry because it's say cannot access.
so, I try to install smartdialer first and then 3G dialer.
It's have a some error on installing 3G dialer. It's say you have to remove SmartDialer version first.
I accept and again error tell me that cannot remove SmartDialer version.
Anyway, after that error it can continue install 3G dialer and finish. SR again.
Now, It's work fine and look nice.
Thanks for your work.
My Phone is Dopod 810 or Trinity
nice work but don t work on my ks20 wm6
The dialer didn t wanted to be installed the cab doesn t work
it ALMOST works perfectly on my polaris. has a few tiny visual bugs.. including one with which i can't see the smart dialing numbers. but everything works.. in general.
great work.
bigsilly said:
I Like you dialer
SmartDialer work fine
I didn't have 3g connection right now, so I don't know it's work or not.
I didn't edit any registry because it's say cannot access.
so, I try to install smartdialer first and then 3G dialer.
It's have a some error on installing 3G dialer. It's say you have to remove SmartDialer version first.
I accept and again error tell me that cannot remove SmartDialer version.
Anyway, after that error it can continue install 3G dialer and finish. SR again.
Now, It's work fine and look nice.
View attachment 112863
Thanks for your work.
My Phone is Dopod 810 or Trinity
Click to expand...
Click to collapse
Glad it works for you and thanks for using it.
nir36 said:
it ALMOST works perfectly on my polaris. has a few tiny visual bugs.. including one with which i can't see the smart dialing numbers. but everything works.. in general.
great work.
Click to expand...
Click to collapse
Glad it works almost perfect for you and thanks for using it.
thorfr said:
nice work but don t work on my ks20 wm6
The dialer didn t wanted to be installed the cab doesn t work
Click to expand...
Click to collapse
Thanks for the feedback that it won't work for ks20.
great dialer! works perfect on my hermes with WM6.1 V24 from Dvha79_ddt! i had only to install the two cab, no problems for now, i can do videocall and using smart dialing.... i'm glad to have found your dialer, is one of the best i've ever seen on my device thanks again!
mimmo_kallon said:
great dialer! works perfect on my hermes with WM6.1 V24 from Dvha79_ddt! i had only to install the two cab, no problems for now, i can do videocall and using smart dialing.... i'm glad to have found your dialer, is one of the best i've ever seen on my device thanks again!
Click to expand...
Click to collapse
Glad it works for you too! Thanks for the feedback.
I tryed it but video call dont work on my Trinity with French Rom (Netdrg 3.5L)
Apprearence is OK except in the "menu" which shows some trouble. I think it's due to smartdialling.dll.0409.mui and phcanrc.dll.0409.mui that are in english (0409) and not in French (040C).
Any Idea ?
Francois57 said:
I tryed it but video call dont work on my Trinity with French Rom (Netdrg 3.5L)
Apprearence is OK except in the "menu" which shows some trouble. I think it's due to smartdialling.dll.0409.mui and phcanrc.dll.0409.mui that are in english (0409) and not in French (040C).
Any Idea ?
Click to expand...
Click to collapse
Sorry, not too sure but if you think it is due to the two files, and if you have the right French files, pm me and let me know. I can change the two files for you and make a new cab.
Thank you for the proposal. I need first to find the 2 files.
zard said:
Have you been getting frustrated with some of the dialers that after you install, either the screen will look funny (see first picture) or smartdial menu is not appearing?
Well, after many testing, I have managed to find the solution to make it work. The skins I used for this 3G combo dialer comes from bluemetalaxe and sakajati. Special thanks to both of them for their skins.
I only have a Kaiser, so not too sure if it will work for other phones. Do let me know if it works for other phones. Note that the new skins is only for portrait, not landscape. For landscape, it is the default from HTC. Hopefully, I can get some skins for landscape to add into the cabs.
Enjoy:
Steps to make it work:
1. SR your device.
2. Use a registry editor to delete the following registry. Note that some of the registry keys cannot be deleted the first time round, so after you have finished the list, do a SR and repeat the deleting of registry keys.
3. Do another SR and install the smartdial cab. Next install the 3G dialer cab. SR and you should have a working 3G dialer.
Registry Keys List:
HKCU:
HKCU\ControlPanel\Phone
HKCU\ControlPanel\Sounds\VTAlerting
HKLM:
HKLM\Security\Phone
HKLM\Security\ResOver
HKLM\Software\HTC\3GVTEngine
HKLM\Software\HTC\ConcurrenceMgr
HKLM\Software\HTC\HTCSDKVTCodec
HKLM\Software\HTC\Phone
HKLM\Software\HTC\PhoneCanvas
HKLM\Software\HTC\SmartDialing
HKLM\Software\Microsoft\DialParser
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\AppView
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\Contacts
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\Phone
HKLM\OEM\MASD\Phone_Canvas
HKLM\OEM\MASD\VideoTelephony
HKLM\OEM\MASD\Smartdialing
Click to expand...
Click to collapse
congratulation to your work, looks fine.
i did install your dialer in my rom - no troubles .. but now everytime i switch it on, the dialer starts itself. if i switch the phone on from standby and also when i do a softreset
any ideas? i didn't cook it in yet, but i will do so tomorrow or so..
nosedive said:
congratulation to your work, looks fine.
i did install your dialer in my rom - no troubles .. but now everytime i switch it on, the dialer starts itself. if i switch the phone on from standby and also when i do a softreset
any ideas? i didn't cook it in yet, but i will do so tomorrow or so..
Click to expand...
Click to collapse
Did you follow the steps I mentioned to delete those registries in between SR?
I've not experienced what you had mentioned. Tried on many Kaiser roms and works all the time without the problems you highlighted.
zard said:
Did you follow the steps I mentioned to delete those registries in between SR?
I've not experienced what you had mentioned. Tried on many Kaiser roms and works all the time without the problems you highlighted.
Click to expand...
Click to collapse
yes i did ... i actually did remove the entries from my rgus from rom kitchen and did then cook it in, but still the same issue
i guess it has something to do with that reg-key HKLM\SOFTWARE\HTC\PHONE\NikeOptionOnOff .. i did set this to 0 and the phone did actually not dial after softreset - but still "auto-dial" when switching on from standby
I installed Smartdial and 3G dialer and everything works perfect without any problems.
The only thing that changed and didn't wanted it to, is that the icons on the taskbar have changed, even the battery icon.
kostas-k said:
I installed Smartdial and 3G dialer and everything works perfect without any problems.
The only thing that changed and didn't wanted it to, is that the icons on the taskbar have changed, even the battery icon.
Click to expand...
Click to collapse
Can you do a screen capture of the icons on the taskbar before and after you installed the dialer?
Thanks.

{Oct 14} Flaxjef Dutch WM 6.1 ROM + m2d BLACK + 3D-drivers NLD V1.0

IMPORTANT ------> Perform a hard reset after flashing new roms <------- IMPORTANT
If you report issues I know is related to you not doing a HR after new flash, you will in most cases not get a answer from me.
Also reporting issues allready mentioned and confirmed is a waste of time.​
Hi,
I am a newbie here @ XDA and after a lot of work and learning I managed to build my first rom. I was looking for a dutch rom with manila after I tried itje's m2d rom. But there was not one there, so I made one myself. Everthing is translated inside this rom to dutch (as far as I know). I hope someone will use this and leave a message.
This is how I cooked my rom:
- I have used a shipped Windows Mobile 6.1. rom
and added (and translated):
- Manila2d (black theme)
- Manila Configurator
- 3D drivers
- Youtube
- Googlemaps
- Album
- Opal Volume Control
- Audio Manager
- Task Manager
- Opera 9.5
removed nothing (can make a lite one if people want that)
I used the orginal dailer because I use videodailer very often and it's working.
I used the orginal camera because it have auto-focus function.
I want to say thanks to UDK for his briljant kitchen.
I also want thank the Polaris 3D Development theme for their great 3d drivers.
And I wanna say special thanks to NeoS2007 for his quick reply's and great help to my stupid questions.
I did put a lot of work in this rom. It is running fast and stable, I didn't found bugs for now so please report found bugs.
Known bugs:
- analog and digital clock are "on" by default, can be changed by manila2dcustomizer
- video from album not working
- status bar is not showing correct
I don't know how to make screenshots, so if somebody can please make them for me I will be very happy, because I really to tired right now.
Here is the downloadlink http://rapidshare.com/files/153976144/FLAXJEFv1.0_DUTCH_6.1.rar.html
Have fun with it, please let me know if you are using this rom.
gereserveerd
W00t! nice!
ughh stomme vraag, verwijderd
ughh stupid question, deleted
Is it very hard for you to cook a rom with the new dialer (without video dialing) and with the new camera?
Like making a second version next 2 this one?
one without and one with the new dialer and camera?
nice, welcome as a chef for polaris
itje said:
nice, welcome as a chef for polaris
Click to expand...
Click to collapse
thanks, I love your work your rom inspired me to become a chef
Fontanini said:
W00t! nice!
ughh stomme vraag, verwijderd
ughh stupid question, deleted
Is it very hard for you to cook a rom with the new dialer (without video dialing) and with the new camera?
Like making a second version next 2 this one?
one without and one with the new dialer and camera?
Click to expand...
Click to collapse
I could do that, but then you no longer have a working videocall and crappy pictures. I don't know if a lot of people want that
flaxjef said:
I could do that, but then you no longer have a working videocall and crappy pictures. I don't know if a lot of people want that
Click to expand...
Click to collapse
Well, i also don't know if a lot of people use or don't use videocall.
I am wondering what if i flash this rom to my phone and after that install a cab with the opal dialer. Will this work?
Fontanini said:
Well, i also don't know if a lot of people use or don't use videocall.
I am wondering what if i flash this rom to my phone and after that install a cab with the opal dialer. Will this work?
Click to expand...
Click to collapse
I think you can flash your dailer, but I am not sure about the camera.
I thought when you install camera you will get erorrs.
hmm crap
maybe one rom with old camera and one with the new.
And in both provide the 3g dialer.
After that you could still flash the new dialer right?
And also go back to the 3g dialer
maybe i'm gonna cook my own rom, but how did you translate those programs and maybe you could provide the translated packages?
Fontanini said:
hmm crap
maybe one rom with old camera and one with the new.
And in both provide the 3g dialer.
After that you could still flash the new dialer right?
And also go back to the 3g dialer
maybe i'm gonna cook my own rom, but how did you translate those programs and maybe you could provide the translated packages?
Click to expand...
Click to collapse
Can you give me the cab of the dailer you want to install ?? (check pm)
I will try to instal it for you on my phone
flaxjef said:
I don't know how to make screenshots
Click to expand...
Click to collapse
That´s easy: MagicSS. Good luck with the dutch romcooking. I might just try it one dat when I get fed up with udK Diamond R8.
easier
my mobiler: install to your computer, connect your device....
deechte said:
That´s easy: MagicSS. Good luck with the dutch romcooking. I might just try it one dat when I get fed up with udK Diamond R8.
Click to expand...
Click to collapse
thanks will make screenshots later, thanks for help
itje said:
easier
my mobiler: install to your computer, connect your device....
Click to expand...
Click to collapse
thank you great app!
flaxjef said:
This is how I cooked my rom:........
I don't know how to make screenshots, so if somebody can please make them for me I will be very happy, because I really to tired right now.
Click to expand...
Click to collapse
That is really funny, sorry must saying this.... You know how to cook a ROM, but dont know how to make a screenshot! But, welcome a board!
Hey FlaxJef,
Nice to finally see your ROM. Glad to know I could help you.
It's also good to see a Dutch chef around. (Lexi1986 was the last one, but he sold his Polaris, and I suck at making roms)
So, glad you're on board!
NeoS2007 said:
Hey FlaxJef,
Nice to finally see your ROM. Glad to know I could help you.
It's also good to see a Dutch chef around. (Lexi1986 was the last one, but he sold his Polaris, and I suck at making roms)
So, glad you're on board!
Click to expand...
Click to collapse
Thank you very much. I wil keep updating as much as I can, but I am very new here and could use some help sometimes I stil have to learn a lot I think.
I am allready looking at tf3d right now, let's translate everything all over again.
Looks like this is a very clean ROM, with Manila2d and some basic stuff needed by it. Could you cook a WWE ROM just like this one?
just flashed my phone to this rom:
some little bugs:
-analog and digital clock are "on" by default but can be changed with the manila2d customizer
- video from album not working
- status bar is not showing correct
Phantom1275 said:
Looks like this is a very clean ROM, with Manila2d and some basic stuff needed by it. Could you cook a WWE ROM just like this one?
Click to expand...
Click to collapse
Ok I can do that but, I will start in a couple of days, I wil put it a different post, Í'll let know where to find it

[SKN] Ryon WM Dialer VGA

Heey!
I don't know if anyone is still using the original WM Dialer but me now with all the phonecanvas and stuff out there, but anyway..
Here is a skin I made..
Feel free to use
(I only use the wm dialer for making calls, for answering I got S2U2 which is great!)
In landscape mode some buttons got little graphic issues, but don't use lanscape my self..
Download cab and transfer to your device, run and softreset.
This is my first cab but I have tested it and seems to work fine.
(Uninstallable. From Remove Program's list as any other program)
Use at own risk! Your phone is not my responsibility!
http://www.megaupload.com/?d=7SXGLJLR
Enjoy
very nics for sharing i still use the WM Dialer think its snappy and less mem usage like the colors black and grey less mem usage ,.thank you
Best dialer skin I've seen, you should make one for the htc side to answer phone canvas like this, Thanks
Great!
Going to install this on my 6.5
Thanks!
EDIT: Worked out great!
Good job, thanks a lot !!!
is this only working on wm 6.5?
thanks for your quick answer
thanks
robsterr said:
is this only working on wm 6.5?
thanks for your quick answer
thanks
Click to expand...
Click to collapse
No, it's made for the original wm dialer in wm6.1.
I have not tested on 6.5 but WH33LSONFIRE did, so it seems to work on both..
No change to Dialer
Hi,
sorry if im missing something simple here but having installed the cab restarted device the dialer remains the standard wm one.
My Device is the diamond using latest orange rom.
cheers.
james
Great job! I've disabled the TF3D dialer, because the memory leak is in there. So now my diamond looks fresh again! Thx
really nice looking dialer, Ryon. thanks!!!
I like it a lot!
I don't use the WM dialer anymore (since slide-to-answer came along) but I'll add a link to this thread in my WM dialer skins thread.
Keep up the good work!
Davey101 said:
I like it a lot!
I don't use the WM dialer anymore (since slide-to-answer came along) but I'll add a link to this thread in my WM dialer skins thread.
Keep up the good work!
Click to expand...
Click to collapse
That's cool
And tanks for finding the solution for the bluetoothicon issue!
Working good on my Diamond (but BTicon is realy low res..) anyway better than nothing!
Beautiful skin. Can anyone upload to rapidshare? I can't access megaupload. It says the service is not available in my area.
Edit: Dont'worry. Got it now. Will test soon.
It looks a lot like the Pocketshield dialer.
Hi there guys
What's going wrong on my device when I don't see the back key image?
not compatible with 6.5
savior02 said:
not compatible with 6.5
Click to expand...
Click to collapse
I'm running it on 6.5 with no problems.
Biggzz said:
It looks a lot like the Pocketshield dialer.
Click to expand...
Click to collapse
does anyone know if it works with pocket shield bye the way cos this looks nicer than the one have to use with pocket shield.
hmm can upload the file to some other location? Can't download from the link
stevensp said:
hmm can upload the file to some other location? Can't download from the link
Click to expand...
Click to collapse
See attached.
Ryon, let me know by PM if you'd like me to remove this post.

[APP][VGA][COOK-ONLY][2010-06-04]Qilin Canvas 4_3_61120121529 VGA WM6.5.x by Veisen

hello here is my port of qilin phone canvas form new Topaz rom
it is fixed for all version of wm6.5.x ---> screenshots
thx for nice skin to matt_jackson
http://forum.xda-developers.com/showpost.php?p=5442329&postcount=3
thx to amarullz for his vga hack
Package
http://rapidshare.com/files/3953163..._Canvas_Enhancement_4_3_61120121529_0_VGA.rar
languages included
0409 english
0405 czech
0804
WOW!
That's amazing!!!
but there is with the default skin and with the italian language(0410)?
Both links are incorrect.
EDIT: I fixed the links.
But, are you thinking that you need to have a duplicated thread? You have one like this exactly here : http://forum.xda-developers.com/showthread.php?p=6695325#post6695325
I think it's better to have one thread, so you can focus on your way better.
Regards
stronkyz said:
WOW!
That's amazing!!!
but there is with the default skin and with the italian language(0410)?
Click to expand...
Click to collapse
default skin isnt problem and lang 2
Nice work bro!
omg thats beautiful and awesome man.....was just looking for a new vga phonecanvas.
couple questions though...how do we get the original look back (not saying i do cause the skin is amazing).
AND
why does it look like maybe some of the images are cut off? is this just a bad screenshot?
Hi,
Not to be the bad guy here... but would it be great if Veisen could at least credit amarullz as his VGA hack is used in the package...
Nice dialer I like the #Key pad colors and everything awwwsome ... hope you can provide with different resolutions
Will this dialer show facebook images?
video call not support
today i buid cab for exist roms
veisen said:
default skin isnt problem and lang 2
Click to expand...
Click to collapse
ok i'll wait for the upload!!!
Thanks a lot. It's a cool phone canvas!
The only problem I'm facing is that I lost bluetooth notification icons. Any clue on how to fix this if it is related to the port in any way? Used to work in Amarullz Rhodium port.
daeinnor said:
Thanks a lot. It's a cool phone canvas!
The only problem I'm facing is that I lost bluetooth notification icons. Any clue on how to fix this if it is related to the port in any way? Used to work in Amarullz Rhodium port.
Click to expand...
Click to collapse
The Qilin Phone Canvas requires Taskbar Icon Mgr for the BT icons. I made a CAB of one here: http://forum.xda-developers.com/showpost.php?p=5427896&postcount=307
Does this Dialer have Landscape support?
Captain_Throwback said:
The Qilin Phone Canvas requires Taskbar Icon Mgr for the BT icons. I made a CAB of one here: http://forum.xda-developers.com/showpost.php?p=5427896&postcount=307
Does this Dialer have Landscape support?
Click to expand...
Click to collapse
Amarullz's hack is used, so it would be as it was.
programatix said:
Amarullz's hack is used, so it would be as it was.
Click to expand...
Click to collapse
I don't think I understand your answer. Some of the Phone Canvases have Landscape support, but some do not - the Rhodium Phone Canvases generally work in Landscape, but some of the newer ones (Leo?, Qilin, Huashan) do not. amarullz phcanvga.exe doesn't have anything to do with whether the Dialer has native Landscape support, does it?
Captain_Throwback said:
I don't think I understand your answer. Some of the Phone Canvases have Landscape support, but some do not - the Rhodium Phone Canvases generally work in Landscape, but some of the newer ones (Leo?, Qilin, Huashan) do not. amarullz phcanvga.exe doesn't have anything to do with whether the Dialer has native Landscape support, does it?
Click to expand...
Click to collapse
Even if it does, it uses amarullz's hack, thus is not fully ported. That is what I mean.
Captain_Throwback said:
The Qilin Phone Canvas requires Taskbar Icon Mgr for the BT icons. I made a CAB of one here: http://forum.xda-developers.com/showpost.php?p=5427896&postcount=307
Click to expand...
Click to collapse
Thanks Captain_Throwback! Sure your cab restored the missing bluetooth notification icons, though it defeats jmckeejr's chrome theme hack of Brian's toolbar. But, still appreciate your work on it.
Does this Dialer have Landscape support?
Click to expand...
Click to collapse
Unfortunately, it doesn't support landscape mode: manually or by using "flip it". Good query, I never tried until you brought it up. Nevertheless, as I seldom use the dialer in landscape mode, I'm quite happy with it. Thanks again!
veisen said:
today i buid cab for exist roms
Click to expand...
Click to collapse
Is there this cab available for download?
Thanx
Mbiba
still WM dialer after cooked
Hi,
Cooked to my ROM (23569), still WM Dialer. What additional package is needed?

Categories

Resources