Related
Hi All,
Just got my new HTC HD2 from Virgin, however I cannot for the life of me seem to connect it to my home WiFi (I've not tried it elsewhere yet).
I've still got my MDA Compact IV here with me and use the same settings as the HD2 and that connects first time no problems, but the HD2 isnt playing ball!
It sees my wireless network at home (full strength) and starts to connect then simply says "Available". No notification of incorrect wireless key etc...reported.
I have used my Compact IV side by side with the HD2 and no issues so I am puzzled as to what I need to do now
Any help would be appreciated.
Thank
Are you sure you didn't set up some MAC address filter in your wireless access point?
kilrah said:
Are you sure you didn't set up some MAC address filter in your wireless access point?
Click to expand...
Click to collapse
I've not enabled MAC address filtering on the router at all, just simple wifi security key access.
Flash a new radio?
(check my sig under hspl flashing guide)
if you are using wep, heres something to try.
routers can be set to three types of wep key
open
open or shared
shared
in my experience if you areset to the middle one, "open or shared" mobile devices can have trouble connecting.try setting it to just "shared"instead.
course it could just be my router but I have seen this behavior in three mobiles including my hd2.
Current router settings is WPA-PSK [TKIP]. I even tried turning off security and got nothing My router is Netgear WGR614v9 - it came with my Virgin broadband deal.
Current ROM version is 1.48.405.2 (71294) WWE and radio version 2.05.51.05.2
Its most annoying that the HD2 on the face of it seems like a really good handset but then I cant get the Wifi connected which most basic handsets have no issues with
Any other possible solutions?
I got the same problem
I have the exact same problem.. Cant connect to my AP with my leo... got no mac secure on, even if i remove my security(WPA/wep or whatever), it will not connect...
I had the same issue when I applied hint 39 from http://forum.xda-developers.com/showthread.php?t=583638
Result: couldn't connect to my network with WPA2.
After restoring the parameters everything is OK.
Right finally got it working!
Installed the Touch_X_Wireless_Draft_N_ON.cab cab and then uninstalled it and now it seems to work.
Cab can be found here: http://forum.xda-developers.com/showthread.php?t=584415
Hope that helps others out too
I had this issue too, could see my home Wifi network, but the device would just say, "Incorrect Network Key". But it was correct!
I now have it working strangely by changing router Security Options to (WPA-PSK + WPA2-PSK)
Connects with no hesitation now!
my advise is disabling WEP password in both HD2 and the router.
it works perfectly.
"Incorrect Network Key" problem
Bro you made my day! I spent whole day to figure out a solution to the exact problem. I wish I had seen your reply before. When I changed my cable modem's setting as suggested and encryption to AES, it worked
Thanks again.
spyralmale said:
I had this issue too, could see my home Wifi network, but the device would just say, "Incorrect Network Key". But it was correct!
I now have it working strangely by changing router Security Options to (WPA-PSK + WPA2-PSK)
Connects with no hesitation now!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=959764
"When you connect to wifi on your phone, open terminal emulator and do a ping to your PC's IP address, or use any ping app (I am using Net Ping from market). As soon as you start to ping your PC, connection is immidiatelly opened. I have no idea why it is like that, but for now I am using this method when I want to use FTP server on HD2...."
I've had the captivate about 24 hours now and dig it. I've rooted it and remove the att bloatware (per titanium backup), I've also performed a backup using Rom Manager.
I'm having trouble getting it up and running on an enterprise wireless what uses 802.1x PEAP authentication. I can get through all the auth. steps, and the device is assigned an IP, but I am unable to do anything that requires an internet connection; browser, market, etc.
Has anyone else ran into this issue?
*****EDIT*****
sigh i just realized that this is in the wrong area, it should have been over in development...i'm an idiot
I had a similar problem on a WEP-encrypted network, which I fixed by setting a static IP on the phone and then setting it back to DHCP (the correct setting). However, your problem could be entirely different than mine (not that I even am sure what my problem was, just that I fixed it!)
Best of luck!
Having the same problem on enterprise access points regardless of encryption. Home wifi netwroks work great (open and WPA2). Enterprise APs (open and WEP) connect and give me an IP, but will not transfer data. Think its a driver issue with the Wifi, it happens on every captivate ive tested, and seems to be more widespread than the GPS issue.
I have had the same issue with my work at work. I can get it to connect and get a ip but can not pass any data.
Sent from my SAMSUNG-SGH-I897 using XDA App
Had the same problem at work. Luckily I'm an admin and figured mine out. Our monowall portal was the issue. I can give a detailed answer for my problem tomorrow when I get to work.
I actually had the cap wiped to go back, then I literally figured out the problem. Thanks go out to my team mate for helping me talk through this.
Sent from my SAMSUNG-SGH-I897 using XDA App
can't wait to hear what your fix was!
Sent from my SAMSUNG-SGH-I897 using XDA App
This sounds more like your network not being allowing your device rather then the device having an issue.
it's been frustrating as I know two other guys with android devices that didn't have an issue. one is a droid eris running 2.1 and the other is a nexus one running 2.2.
Sent from my SAMSUNG-SGH-I897 using XDA App
designgears said:
This sounds more like your network not being allowing your device rather then the device having an issue.
Click to expand...
Click to collapse
Worked closely with my highly experienced network admin in my dept. for an afternoon (we had some time to kill). He checked the firewall and dhcp servers, ran packet traces, etc.
With what I'm experiencing, its the device. These wifi networks we use with Cisco APs are completely wide-open. All other phones and mobile devices have always worked great for years. We rely on this network for many custom applications and mobile tools.
Once the dhcp server leases an address, it seems like the radio stack hangs, and the device ceases communication. Here's an older thread on the exact issue over at androidfouroms: http://androidforums.com/samsung-captivate/130403-wifi-terrible.html
I have tested multiple new unmodified captivates and the issue is identical accross the board.
Now that I am at work, and have coffee in me and not beer, I will go through the problem I had with miCap and works wireless. Due to my skeptical ways, I will be semi vague for security purposes. On with it.
When I originally got miCap (pet name for it) I was able to access our public wifi. It allowed me into the public portal to agree to terms. I played a little bit on it, but wanted to see if I could access our private wifi. I got in the private no problem. But after that I never was able to get back on to our public. It did the same thing as I've read. It got an ip no problem (via dhcp) and acted like all was well. No browser, or ap could get a connection. The phone would not switch over to 3g to get info.
Armed with ip and mac address, my co-worker and I started to did through our monowall. ( He also has a cap that had no issues on public or private). We try tried reserving the ip for miCap, didn't work. We tried static ip, didn't work. I spent the morning completely wiping miCap to get it back to return worthy.
This was when I decided on last ditch effort.
Our ap's are cisco's that connect into monowall. I got into monowall and dug around. I found that with in the captive portal (how fitting) that the ip/mac associated with my phone hadn't checked in for 8 days. Even though I tried everyday. I deleted the entry to the phone there and suddenly my phone was getting access again.
Now I understand that this may not help everyone, because setups vary from place to place. But digging deeper into configurations at the access points may be what is needed. Do I think the phone had nothing to do with it? No, I think it helped aggravate the problem.
We have had problems with the Intel 3945abg chipsets with the same exact setup. That problem was fixed with driver updates on the laptops.
sorry for the long winded reply.
So in a nut shell you deleted the DNS entry for that ip/mac in the firewall and you are working.
Pmac25 said:
So in a nut shell you deleted the DNS entry for that ip/mac in the firewall and you are working.
Click to expand...
Click to collapse
Essentially yes. But it is not listed like that in the portal. Hmmm. I wonder about the combo of dhcp/dns being the culprit.
I was able to resolve this issue by changing my connection settings from DHCP to static for the Cisco APs.
Installing WiFi Buddy from the market allowed me to access these connection settings.
I just used an address from our static IP pool.
Manually set IP, subnet, gateway, and DNS, and now im finally rolling on our enterprise wifi network
I sent a help ticket into samsung; maybe if enough folks do we can get it on their radar.
jhannaman82 said:
I was able to resolve this issue by changing my connection settings from DHCP to static for the Cisco APs.
Installing WiFi Buddy from the market allowed me to access these connection settings.
I just used an address from our static IP pool.
Manually set IP, subnet, gateway, and DNS, and now im finally rolling on our enterprise wifi network
Click to expand...
Click to collapse
you can set the ip manually with out an app. When on the wifi screen, hit menu-advanced. This is a good time to set the wi-fi sleep policy also.
phlunkie said:
you can set the ip manually with out an app. When on the wifi screen, hit menu-advanced. This is a good time to set the wi-fi sleep policy also.
Click to expand...
Click to collapse
Thanks for that, i figured the menu was built in somewhere just never found it.
:thumbsup:
UPDATE
So I flashed the i9000 Eclair rom last night, and when I got into work today I can connect and use the wifi here. So looks like something AT&T buggered up, big surprise there, when they "customized" the captivate.
As much as I normally love blaming AT&T for problems, that can't be done here. My Captivate (running Stock Firmware) connects just fine to my work network. We use 802.1x with PEAP/MSCHAPv2 for authentication.
Anyone been able to connect at over 802.11b speeds while connected to an 802.1x network? I show connections at G and N speeds on my WPA2 network but nothing over 11Mbps on 802.1x.
Sent from my SAMSUNG-SGH-I897 using XDA App
Hi,
I am also having problems with my work wifi network.
It is 802.1x, on TTLS/PAP it also requires a thawte premium server ca certificate insalled.
Is there any way to connect this kind of networks?
With my previous iphone 3g it was taking only 4-5 seconds.
I can pick up the WIFI, and it says excellent connection, but the school requires a login page for you to enter your username and password before you can start browsing.
So after I'm connected, I try opening a browser but it instantly says I dont have internet access. I dont know what to do or how to fix this. Has this happened to anyone else?
If your campus is like mine, you may have to go to the IT help office. Once a year I need to do this to have a clearance installed on my laptop. Havent tried yet for my G2 but I know we support iphones for wifi on campus.
How safe is it to connect the G2 to a open network without security though? Thats what worries me about connecting my G2 to my schools WiFi.
as long as there is no protection on the Wifi it is possible for other users to see what you send and receive on your phone over wifi.
boost3d23 said:
How safe is it to connect the G2 to a open network without security though? Thats what worries me about connecting my G2 to my schools WiFi.
Click to expand...
Click to collapse
I'd worry more about connecting your computer to the WiFi. As far as open WiFi goes, the school ones is probably more secure than your random Starbucks is, however.
This is how to get WIFI on my campus, maybe yours might be the same
http://www.uic.edu/depts/accc/network/wireless/android.html
The thing is my school network doesn't prompt me for a password.
As of now I have yet to fix the problem. In some buildings, I have no problem using the WIFI. Basically connect to the network, open my browser and it will ask me to input my ID and password and done.
But there are times where I connect to the network, open my browser and it just shows an offline page. I can keep on refreshing, but it just loads the offline page right away, and I can't find a way to input my password.
I've tried bookmarking the input page, but it still doesn't work.
I've also tried copying down the IP and DNS but it didnt work either.. and too troublesome.
For some reason WIFI on android just sucks. My old old sony ericsson phone could connect to the school network every single time. It could also connect to the ad-hoc network my windows 7 laptop send out using connectify.
Yet my new desire z has problem connecting to campus networks and cannot see ad-hoc until i temproot it and mess with the system files.
ironic huh
Really? In my school am able to connect with my g2
Sent from my HTC Vision using Tapatalk
Unfortunately there is not known any other way for the ad hoc except root and temp root.I does not work also on the latest 1.82.
How safe is it to connect the G2 to a open network without security though? Thats what worries me about connecting my G2 to my schools WiFi.
Click to expand...
Click to collapse
Dude the op stated he needed a username and password..so how exactly is that an open network?
Sent from my T-Mobile G2 using XDA App
If it's anything like my school, it will be WPA-Enterprise.
ID will usually be: (domain)\(student ID) where (domain) is your schools domain (ask IT for it) followed by your student ID
PW will usually be the same password you use to log into the school computers.
IT people are usually helpful in getting your devices onto the school network.
thunder9111 said:
The thing is my school network doesn't prompt me for a password.
As of now I have yet to fix the problem. In some buildings, I have no problem using the WIFI. Basically connect to the network, open my browser and it will ask me to input my ID and password and done.
But there are times where I connect to the network, open my browser and it just shows an offline page. I can keep on refreshing, but it just loads the offline page right away, and I can't find a way to input my password.
I've tried bookmarking the input page, but it still doesn't work.
I've also tried copying down the IP and DNS but it didnt work either.. and too troublesome.
For some reason WIFI on android just sucks. My old old sony ericsson phone could connect to the school network every single time. It could also connect to the ad-hoc network my windows 7 laptop send out using connectify.
Yet my new desire z has problem connecting to campus networks and cannot see ad-hoc until i temproot it and mess with the system files.
ironic huh
Click to expand...
Click to collapse
This would happen to me on my campus also. What I would do is either keep pressing the back button until the browser exits completely, go back to the homepage(browser homepage), or just reboot the phone/kill browser task. Its certainly not consistent but at least one of those three would solve the problem on my campus.
On the other hand, my campus is in the city so generally hspa+ is faster than campus wifi (sad i know)
boost3d23 said:
How safe is it to connect the G2 to a open network without security though? Thats what worries me about connecting my G2 to my schools WiFi.
Click to expand...
Click to collapse
Paranoia is a disease unto itself and may I add the person standing next to you may not be who they appear to be so take precaution.
More than likely you have to register your MAC address with the school. Should be done with the computer department (probably via a web page).
Gwanatu said:
More than likely you have to register your MAC address with the school. Should be done with the computer department (probably via a web page).
Click to expand...
Click to collapse
this can sometimes be the case, although on my g2 here at Oxford College of Emory University, I never had to go to IT to officially register at all.
something that might work, though. Try not using the stock browser, but instead something like miren, dolphin browser or the like, and set the browser to use the desktop mode. Usually this will bring up the login screen, just like it would as if you had logged in from your laptop. hope that works for you, if not, pm me or hit me up on google talk (same user) and I can try to help troubleshoot some other possibilities.
There appears to be a problem with new versions of Android and old routers. Many people have reported the "obtaining IP address" loop problem.
Let me explain. I use the leisure facilities in a local hotel. It has a public (open) wifi network. I believe it uses an old router. My Galaxy S2 (Gingerbread) and AsusTransformer (ICS) both connected to this network without problems. I recently replaced the S2 with an S3 (ICS) and my Transformer with a Nexus 7 (Jellybean). Neither of my new devices connect to this network. I have had the same problem in a local cafe.
I have researched this problem. It is not uncommon. It appears to be caused by an odd mix of hardware (router and wifi chipset) and software (later versions of Android). If you are unlucky (like me and some others) you will be unable to connect to some networks.
The solution is to use static IP addressing (since your device is unable to obtain a dynamic IP address). This will allow your device to connect to the network -- but you need to know the correct settings (for static IP addressing) before you can actually use the network.
This problem has been reported by many people. Does anyone know if there is a fix or a workaround?
The only one I can think of it to get hold of a device that does connect to this network and copy the (static IP) settings. But this would only solve it for one location meaning that I will run into it again the next time I try to connect to a network with old hardware.
Sometimes when I get that problem it's due to IP address conflicts on the Windows 7 computers.
I go to the computer and:
http://helpdeskgeek.com/networking/release-and-renew-an-ip-address/
Otherwise I just pull the router out and refresh it, should work for another few weeks or so.
Asovse1 said:
Sometimes when I get that problem it's due to IP address conflicts on the Windows 7 computers.
I go to the computer and:
http://helpdeskgeek.com/networking/release-and-renew-an-ip-address/
Otherwise I just pull the router out and refresh it, should work for another few weeks or so.
Click to expand...
Click to collapse
I don't have access to the PC. It is owned by the hotel. I need a solution that I can apply client (Nexus) side.
Solution
I found a solution. I asked the guy to reset the router and both my Nexus and S3 immediately connected. Someone advised me to do this. I have no idea why it worked. Not really a solution since i cant go round cafes asking people to reset their routers for me.
Is there a way to find out IP, DNS, gateway etc values on Nexus when they are dynamically assigned?
I sometimes have this Problem when starting my accesspoint after enabeling wifi on my N7.
I have to reboot my N7 in that case to get an IP.
Happened to me quite a few times when I went out with it to a restaurant or something. It just loops and loops.
My Nexus (and S3) now connect to the hotel network every time now. So it looks like you only need to ask the owned to reset his router once.
Embraced with this problem
bobbyelliott said:
My Nexus (and S3) now connect to the hotel network every time now. So it looks like you only need to ask the owned to reset his router once.
Click to expand...
Click to collapse
Resetting the modem solves the problem if you don't make any change to the router settings. I don't understand why the hell google is not solving the problem yet...
many users are found to face the same problem..
eve I can connect with my Nokia E72 but not with my N7...
I can get the IP from my cell phone. But come on, what's the point of doing so?? Are you gonna assign the IP for each and every WiFi you connect?? Or if the IP changes everyday??
Static ip won't help, yes you can connect to wifi, but cannot get connection to internet. This is a bug of android, and ITs in Princeton univ. had some investigation. 412 should have fixed it
Sent from my HTC Z710e using xda premium
gcd0318 said:
Static ip won't help, yes you can connect to wifi, but cannot get connection to internet. This is a bug of android, and ITs in Princeton univ. had some investigation. 412 should have fixed it
Sent from my HTC Z710e using xda premium
Click to expand...
Click to collapse
no. The same problem with 4.2.1 on my N7. God,this is really pissing me off !
EDIT: Finally found a solution . Thank god!!
TheDarkDefender said:
no. The same problem with 4.2.1 on my N7. God,this is really pissing me off !
EDIT: Finally found a solution . Thank god!!
Click to expand...
Click to collapse
What was the solution?
bobbyelliott said:
Is there a way to find out IP, DNS, gateway etc values on Nexus when they are dynamically assigned?
Click to expand...
Click to collapse
For a simple display of the values look at something like Network Signal Info of Wifi Analyser (both free)
jet1000 said:
What was the solution?
Click to expand...
Click to collapse
Use a static IP .
Sent from my Nexus 7 using xda app-developers app
You can only get internet access when you'll be using the correct IP, DNS etc. So try to find out what is the working IP setting...
Sent from my Nexus 7 using xda app-developers app
Deleted
I just started having a similar problem. I have a samsung galaxy tab with Sprint. I've had it for a year and this is the first time I've had this trouble.
The only difference is, I cannot connect to any wifi network at all. It keeps hanging on "obtaining IP address" and then disconnects. It doesn't matter if it's my home wifi or school or free wifi in a restaurant.
The only possible connection I can make is that I downloaded Lookout to check it out as a possible security app, I have since uninstalled it but that did not fix my problem.
Continuing to research this but any ideas on how to fix this would be fantastic.
I'm having this problem on my HTC One S. It happened yesterday without warning and it's really annoying. I went to a nearby cafe and the wifi worked perfectly, so it's something wrong here.
Static IP solution connects to me to the network but I can't actually use the internet, so I'm stumped.
i'm getting the same error with AOKP 4.2.2, and also know people with stock 4.2.2 with it.
the only way i found to fix it is to reboot the phone..... and wait for it to happen again and reboot it again
i cannot use static IP since in my university (and some other public places) it is not possible to connect it like that :S
TheDarkDefender said:
no. The same problem with 4.2.1 on my N7. God,this is really pissing me off !
EDIT: Finally found a solution . Thank god!!
Click to expand...
Click to collapse
How did you solve this? I Need help with my tf 300
bobbyelliott said:
There appears to be a problem with new versions of Android and old routers. Many people have reported the "obtaining IP address" loop problem.
Let me explain. I use the leisure facilities in a local hotel. It has a public (open) wifi network. I believe it uses an old router. My Galaxy S2 (Gingerbread) and AsusTransformer (ICS) both connected to this network without problems. I recently replaced the S2 with an S3 (ICS) and my Transformer with a Nexus 7 (Jellybean). Neither of my new devices connect to this network. I have had the same problem in a local cafe.
I have researched this problem. It is not uncommon. It appears to be caused by an odd mix of hardware (router and wifi chipset) and software (later versions of Android). If you are unlucky (like me and some others) you will be unable to connect to some networks.
The solution is to use static IP addressing (since your device is unable to obtain a dynamic IP address). This will allow your device to connect to the network -- but you need to know the correct settings (for static IP addressing) before you can actually use the network.
This problem has been reported by many people. Does anyone know if there is a fix or a workaround?
The only one I can think of it to get hold of a device that does connect to this network and copy the (static IP) settings. But this would only solve it for one location meaning that I will run into it again the next time I try to connect to a network with old hardware.
Click to expand...
Click to collapse
Note: You Must have root.
Go to
/data/misc/dhcp/
and delete all 3 / 4 files there.
And voila it should work.
Hello all.
I can connect my Nexus 10 to my home wifi (password protected), my girlfriend's home wifi (password protected), and the wifi at public places (I've only tried ones without passwords so far). My only problem is when using my University's Wifi. They have one that you use with an account and password, and one that is free (though you need to sign in using an email via a website. Kinda like hotels).
This is surprising to me because I have a Galaxy Nexus running the same OS (4.2.1) and it can connect just fine. When my N10 tries to connect, it says "connecting" for a second or two, and then it just says "Saved" but never "connected" and it never shows a wifi connected symbol at the top right.
I have read multiple posts about wifi problems from 4.2 but couldn't find any specifically buggy wifi problems like this. Have any of you heard of this or a solution to it? Any help would be appreciated!
Have you tried a reboot? Also check to see if your frequency band is set to auto under advanced wifi settings.
Gotta love university security and logins... they can't leave stuff simple
Oh yes. I have rebooted many times and tried using auto, as well as both frequency bands separately.
Hmmm...are you on stock?
Yes I am. Stock on both my Gnex and N10.
I wonder if using a third party wireless manager would help. Search the PlayStore and try one or two. Before you do that, go into your normal WiFi settings and click "forget this network" on the university one.
Hi there,
I work at a University in the midlands and had the same/similar problem. It's to do with certificate revocation in Jellybean (and also the latest ios my colleague tells me). For example on my Nexus 10 I was able to see the network and obtain an ip address but the webpage where you login wouldn't redirect or load. I don't know what Uni you go to but we are advising people to give the IT dept a call and give them your mac address and they can create a fixed profile.
Hope this helps
I'll definitely try the third party app. As for telling the n10 to forget the WiFi, I tried that many times too
Well that's why I mentioned my gnexus because they're the same android versions so if it works on one it should on the N10. I actually work for tech support at my university and my boss couldn't figure it out or suggest a process like you described. Thanks, though!
yodasoja said:
I'll definitely try the third party app. As for telling the n10 to forget the WiFi, I tried that many times too
Well that's why I mentioned my gnexus because they're the same android versions so if it works on one it should on the N10. I actually work for tech support at my university and my boss couldn't figure it out or suggest a process like you described. Thanks, though!
Click to expand...
Click to collapse
Oh yeah you did mention your Galaxy Nexus, my bad! let us know how you get on with the third party app. You could try giving your N10 a static or reserved IP if you have access, as a workaround!
Hey guys,
I'm from France and had such trouble with my Motorola Milestone and my HTC HD2 (and friends too with Samsung Galaxy S2 and Sony Ericsson Xperia Active) with my school's network. If it's an Eduroam network, try Eduroam Fixer from PlayStore, it helped all of us except one Samsung Galaxy S2. Give it a try
https://play.google.com/store/apps/details?id=nl.luqq.eduroamfixer&hl=fr
I wish I could use that app, but it says I can't use it in my country (USA)
yodasoja said:
I wish I could use that app, but it says I can't use it in my country (USA)
Click to expand...
Click to collapse
Make sure you have the EAP set correctly and check if you need a phase 2 authentication. For example, here at UofM we use PEAP for eap and mchapv2 for the phase 2. If you don't have details like these, your tablet won't connect even if you have the proper login.
You will find them at the top of the page you use to login to a secure network.
Hope this helps!
Yes, that is exactly how the secure WiFi is set up at my University, too! What should I do in this case?
Edit: Nvm, Just noticed this was already tried
I had a similar issue with my One XL. It was a frequency issue. I switched it from 5ghz to auto and all was good.
Settings/WiFi/advanced/WiFi frequency band/auto.
Sent from my Nexus 10 using xda app-developers app
Okay so I found out that my N10 is able to connect to the exact same WiFi network when in another building. I believe there is just an issue connecting to the specific router used at a computer lab. Will update when/if a resolution arises for that lab.