Database Users

Wifi - New Rom

hey I've searched pretty much everywhere and I can't find a solution, Got K-jam Rom 2.16.9.1, apart from not being able to find a better Rom, I can't fix my wifi issues, weak signal - struggles to connect and usually gives an error stating that it couldn't assign IP adress. ok so far I've put wifi setting to full performance and placed a registry hack, but nothing changed. assigning my own IP I haven't tried cause I don't know how to do it! anyhow I know this wifi problem is old, but perhaps there is a solution out there!
anyone come across a solution ?

Try to update the Radio ROM.

I'm having this same problem and I can't figure out how to fix it.
I'll try connecting to wifi at home and work and it'll say it's connecting but never actually connects, and then an error message will come up saying "cannot obtain a server assigned IP address"
and I've already updated my Radio to the 2.19.11 version. I also tried changing the access point name from "wap.voicestream.com" to "internet2.voicestream.com" and that didn't work either.
Please help!

ah dude if your using t-mobile, then u have to get 2.69, works best

If you have T-Mobile and you're having this problem it's because you can't use the proxy while you're connected to wifi. You have to go in to connection settings and remove the check from the use proxy checkbox.

xeno1 said:
If you have T-Mobile and you're having this problem it's because you can't use the proxy while you're connected to wifi. You have to go in to connection settings and remove the check from the use proxy checkbox.
Click to expand...
Click to collapse
i just checked the proxy setting and it actually wasnt checked...but im at my friends house and the wifi is actually working. i guess it just doesnt work at home and work haha.

If it works at your friends house and not at home or work, is your network protected? Did you supply it with the keys if it is?

xeno1 said:
If it works at your friends house and not at home or work, is your network protected? Did you supply it with the keys if it is?
Click to expand...
Click to collapse
Yeah at home my network is password protection and I do have the key, but still doesn't work :*(
The one I connected to earlier was an unsecure network, btw.

Ref: Wifi - New Rom
I have i Mate K-Jam with ROM 2.16.9.1 WWE. Post that I have upgraded Radio Rom to 2.47.11 which is available on XDA ftp site and it works well with 64 and 128 bit WEP key and over Wireless Access Points which are G or B standard.

Secure Network on my Wizard
monicaha said:
Yeah at home my network is password protection and I do have the key, but still doesn't work :*(
The one I connected to earlier was an unsecure network, btw.
Click to expand...
Click to collapse
It sounds like you may be using the wrong type of security on the network. Log in to the network with a laptop and then check the security settings. I generally use WPA-Personal with TKIP. However there are several other possibilities. My WIZA100 works fine with my g-54 set to TKIP.
Ray

dtulsani said:
I have i Mate K-Jam with ROM 2.16.9.1 WWE. Post that I have upgraded Radio Rom to 2.47.11 which is available on XDA ftp site and it works well with 64 and 128 bit WEP key and over Wireless Access Points which are G or B standard.
Click to expand...
Click to collapse
I admit that I am somewhat unaware of some of the workings on the Wiz. However, I thought that the Radio Rom was only for the GSM functions. Does the ROM also include the Wireless Radio functions?
Ray

TyTN wireless problems

Hi!
I have a huge problem, with my tytn HTC
I have a wireles network at home. It is built like this:
Cable modem --> (not wireless)Router--> computer (conected to the router via UTP cable, that means with ordinary network adapter card).
In this computer, i have WIRELESS USB card, configured as Access point (AP), so the wireless networks works just fine. With my laptop i can connect to internet through this card with no problem at all...
But, when i try to connect to internet with my TyTN, it just won't work... it finds wireless network, it sais it is available, but when i try to connect, nothing happens. it sais "connecting" and than- nothing happens... after several tries, it sais that my wireless network is unavailable... when i reset my Tynt, it sais it is available again, but the same story again...after several attempts to connect to wireless network, it sais unavailable and that's it...
What is wrong? i tried everything, im quite desspered here...
Well, tnx in advance for any suggestions and advices...
I appologise for my bad english, too...
TNX!

Do you have any restrictions in your Acess point configuration? If yo have, just remove it or reconfigure for acess with your TyTN. Try to remove WEP or MAC filtering or firewall...

Resolving your wireless problems ...
There's actually several things you need to check.
First, on the Router side, insure that you are not restricting your wireless access. For instance, is your Router set to G Only or is it b/g?
Next, on your router side, make sure your router is not hidden. If so, then you'll need to manually add the router via Configure Wireless Networks on your TyTN. At the top is "Add New...". Choose this and insert your settings for your wireless router.
On the TyTN (HTC Hermes) side of things, you need to see if you are set to be B only or if you've upgraded (I think most ROMs on this site have this fix installed) and your device is seen as a G device and therefore can connect to G only devices.
These should hopefully resolve your issues.

i removed restrictions and firewall and still nothing...
Next thing, my wireless Access Point is set to 54g Auto.
On my Tynt i have installed Windows mobile 6 profesional, CE OS 5.2.1437 (build 17944.0.3.1)
I don't know exactly where should i look if my HTC is wireless is B or G...
I tried to change settings on my AP from 54g Auto to 802.11B and to to 802.11G and vice versa, but still nothing...
As i wrote before, i don't have wireless router i just have an ordinary router and then wireless USB card in one of the computers, so i can connect with my laptop to internet over this card. With laptop it works excelent.
So, can anyone suggest what kind of OS should i install on my HTC in order to fix this, and where can i get one?
TNX for so far, and TNX in advance for any further information or suggestion!

Still having problems...i tried everything...
i tried to connect to wireless network at friend's wireless router...TyNT found a signal, everything was just fine, then asked me for key (friend has WEP protection), i typed the password, and then i couldn't connect again...
I havo no clue whatsoever anymore...
Anyone with same problem?? Any suggestions?
Tnx in advance for any advice...

hmm...
I guess it is a hardware problem with my tynt's WI-FI...i can't think of anything else... i tried everything, still can not connect...
Im getting quite desspered with this HTC... i guess i'll sell it and buy NOKIA N95 or something like that...
well, if someone by any chance know where the problem is, i thanks in advance for every advice or suggestion
TNX

tytn wireless
I have nothing to contribute as we have similar problems. I have learned from other users that development team from Htc is preparing a patch which will be released in two months time. Let's wait for it then.

wifi
same problem here ...
I have tried to flash older radio didn't help ...
I have tried disable wep on my router ... didn't help
I'm just in a loop of AVAILABLE-->CONNECTING-->AVAILABLE etc.
please if someone finds a solution (patch) for this problem post it to this thread.

still there?
lithocan said:
I have nothing to contribute as we have similar problems. I have learned from other users that development team from Htc is preparing a patch which will be released in two months time. Let's wait for it then.
Click to expand...
Click to collapse
Hi!
I'm just wondering are there any solutions been found?
Or it's definitely hardware problem?
WBR!

problem
so Ive found my problem ....
Ive upgraded firmware in my router to newest version and problem appeared.
When I've removed encryption wpa2 and set my router to no encryption my wifi worked again.
So I've bought different wifi router and I've no problems now.
So anyone who is having dead wifi in hermes try to deactivate wifi encryption and try a different router (friends house or public wifi hotspot)

pischk said:
There's actually several things you need to check.
First, on the Router side, insure that you are not restricting your wireless access. For instance, is your Router set to G Only or is it b/g?
Next, on your router side, make sure your router is not hidden. If so, then you'll need to manually add the router via Configure Wireless Networks on your TyTN. At the top is "Add New...". Choose this and insert your settings for your wireless router.
On the TyTN (HTC Hermes) side of things, you need to see if you are set to be B only or if you've upgraded (I think most ROMs on this site have this fix installed) and your device is seen as a G device and therefore can connect to G only devices.
These should hopefully resolve your issues.
Click to expand...
Click to collapse
Recently bought my wife one of these devices and just spent two whole days looking for a solution and that was it.. mixed mode - I had mine set to "G" only! Sometimes the solution is too simple for the geek to be able to spot I guess - maybe the wife would have found it faster!
Thanks for the solution.. as with all forums I always suggest a FAQ with these solutions or links to the threads/posts with these tips and resolutions.

kralcak said:
so Ive found my problem ....
Ive upgraded firmware in my router to newest version and problem appeared.
When I've removed encryption wpa2 and set my router to no encryption my wifi worked again.
So I've bought different wifi router and I've no problems now.
So anyone who is having dead wifi in hermes try to deactivate wifi encryption and try a different router (friends house or public wifi hotspot)
Click to expand...
Click to collapse
Lucky... Mine did not connect anymore, flashed black majik over schaps3.6 and voilla! worked again... without touching the router.... Will try last schaps tonight.... I´m tired of flashing and reinstalling....

WiFi data transfer problem

I have a ZyXEL P-2602HW-D1A Wireless router. I have tried all combinations of security, even NO SECURITY WHATSOEVER, and still the device won't transfer data.
Not working;
Firmware: 1.5, Build: CR817
Wifi Router: ZyXEL P-2602HW-D1A
Security: Tried All; WPA2, WPA, WEP & None.
Problem: Connect under all conditions but no data is sent
Please help.

Have you tried another WiFi access point to check the devices WiFi module actually functions?

No, I haven't tried that yet, but don't really see the point... I've connected effortlessly to the same WiFi network with my HTC Touch Diamond.
jbelman said:
Have you tried another WiFi access point to check the devices WiFi module actually functions?
Click to expand...
Click to collapse

For some reason my N800 wouldn't connect to MY ZyXEL P-2602HW-D1A unless I set the device (N800) to disable any kind of wifi powersaving features it had.
On another note, how did you get your hands on the device so early? I'm guessing you are using a Cybercity internet connection? (I'm in copenhagen myself)
edit: I actually came to that solution when i noticed I could connect to OTHER accespoints, but not the Zyxel ones.

Same problem here in France with a Freebox as router

I've noticed under the router's WLAN client list that the device does not have a "Host Name". Would that present a problem?
It is assigned an IP address by the router without any problems, though.
Also the device seems to lose connection and reconnect constantly (every 5-10 seconds).
I done some digging around in the router settings and found an "AnyIP" feature. Would that possibly help?

There are a number of issues floating around. Support for WPA2 seems iffy and some people can just change to WPA or WEP and all work fine.
There are however a number of people (such as me) who can get a connection perfectly, it shows connection OK, they get an IP from the DHCP server etc, they can even browse a page for a few seconds... but after that no data is sent and everything times out. This is happening on any security from none through to WPA2.
I have seen no solution to this anywhere and believe me I have looked. Some people have given up and got a new router, but this is not a solution.
Can someone confirm that this has been recognised as a fault with the magic and is being investigated, rather then assuming it's a user or router error. There are far too many instances of this across many brands of router for it not to be an issue with the HTC Magic.

zyborg said:
No, I haven't tried that yet, but don't really see the point... I've connected effortlessly to the same WiFi network with my HTC Touch Diamond.
Click to expand...
Click to collapse
What I mean is have you tested the device on ANY other AP except the ZyXEL?

No, but since I'm by far the only one having this issue (try searching the web; see my last post), I didn't feel it was necessary. Just want some input from xda-dev that might solve the problem, if any.
jbelman said:
What I mean is have you tested the device on ANY other AP except the ZyXEL?
Click to expand...
Click to collapse

I've had exactly the same problem earlier with the N800 on the zyxel. Exactly how you describe it.
Did you find out if you could turn off any powersaving features on the HTC?

same problem here
in france with a freebox
I don't exaclty know what router is in the box
but I have excalty the same
I set on never the wifi sleep(powersaving) mode.
i found it in setting wifi menu button then advanced and "never"
but the problem is still here

zyborg said:
There are however a number of people (such as me) who can get a connection perfectly, it shows connection OK, they get an IP from the DHCP server etc, they can even browse a page for a few seconds... but after that no data is sent and everything times out. This is happening on any security from none through to WPA2.
Click to expand...
Click to collapse
I have the exact same problem on mine. I just hope it is not a hardware issue...

Could be DHCP lease time problem. Did anyone of you tried to set up Magic with Static IP?

Yes, I tried that also - didn't help one bit.
TheRookie said:
Could be DHCP lease time problem. Did anyone of you tried to set up Magic with Static IP?
Click to expand...
Click to collapse

I also have this problem. Im in Denmark with a Zyxel P660HW-p1.

Another user of Cybercity in Denmark with the same problem.
ZyXEL P-660HW-D1
The android is the only device that doesn't work. I have tried with Iphone and laptops.
I've tried to change the settings on the router to no avail.
Enable 802.11g+ mode [on/off]
RTS/CTS Threshold [2432/4096]
RTS/CTS Threshold [2432/4096]
Max. Frame Burst [600/1800]
The device shows up in the device list with no hostname, the HTC Magic gets the right ip address (using the program WhatIsMyIp to view it)

I had the same problem before, when I set my TP-LINK draft N router with WEP security my HD can see it, connect to it (but speed was slow tho), and my HTC Magic just keep saying its not in range. However, when I set it to open security it works, so I recognise its probably the security setting... so I changed that to WPA2 and then it works.
In my case, I see different device have different tolerance to some settings (in my case, draft N + WEP is OK with laptop, HTC HD, but not Magic), so its still worthwhile to try a few different settings, and try a public wireless access point also to double confirm?

Power save?
I have Zyxel (P-2602R-D1A) router.
I had exactly the same problem with my HTC Vox (winmo)... but that was solved by boosting the WiFi in the phone.
WiFi -> Best performance
So Im guessing magic is in some WiFi "power save" mode...
I dont know how this works, but I thought maybe you could change some WiFi settings behind the hood - that is if the hardware is capable of it.

Zyxel (P-2602R-D1A) router
I am having the same issue with this router as the other posters. The phone connects perfectly and reports an excellent signal, but barely sends or receives any data. I have used a terminal emulator to ping the router and it reports an 82% packet loss. This must be a big problem for many Danish users as it is the standard wifi router provided by two of the major ISP's.

same issue here with my vodafone uk magic.
wifi connects and i can browse for a few seconds then get a connection error and can't browse until i re-start wifi on the magic...
i've actually given up using wifi at home now due to this.
router is a talktalk supplied Huawei Echolife HG520b using 128 bit WEP
i can connect fine via wifi at the office so i don't think it's an issue with the handset, just with certain routers or router configs...
this issue has been reported on the vodafone uk forums but as yet no solution.
http://forum.vodafone.co.uk/index.php?showtopic=31937

HD2 WiFi problem **HELP**

Please help, ive had my hd2 for a few days now and have had nothing but problems, might just give it back!
It picks up my home router but simplify wont connect, it just displays a small rotating circle likes it working but nothings happening.
When i remove the settings and retype the key code it keeps saying incorrect code but it isnt,
Anyone any ideas, can i some how reset the wifi settings, its taken me a few days to customize the phone so i dont really want to do a hardwear reset. Ive already a software restset.
Bloody htc!

What protocal are you using on your router? WPA, WEP?
Oh if your using an older Belkin router, I know of about 3-4 models that used to have trouble with WinMo, an update Router flash fixes it though.
Give us some more info on your router etc and Im sure we can help though

Sure your using the right password/key? if it says its wrongs it is probably wrong lol. Maybe try changing it to a more basic password as a test? like "password" and see if it can get connect.

knightrider66 said:
Please help, ive had my hd2 for a few days now and have had nothing but problems, might just give it back!
It picks up my home router but simplify wont connect, it just displays a small rotating circle likes it working but nothings happening.
When i remove the settings and retype the key code it keeps saying incorrect code but it isnt,
Anyone any ideas, can i some how reset the wifi settings, its taken me a few days to customize the phone so i dont really want to do a hardwear reset. Ive already a software restset.
Bloody htc!
Click to expand...
Click to collapse
Hi
Calm down. Give some information about your router and the type of security You use.
try these
1. Reset the router once
2. If you use MAc access list on the router then add your device's MAC to the list.
3. If you use N router then in the settings untick N mode protection.
Give more details about the third party software on the hd2 using radios (eg: tomtom, igo,gpstuner like these)
Good luck

HI guys thanks for helping out.
Obvious first - yes the key code is correct i use it on my laptop and iphone.
security mode says WAP-PSK/WPA2-PSK. Its a siemens ive been on the ip server addres and cant see any issues, im on my laptop using the wifi now and its working perfet.
Ive tried everything, changing passwords, settings both on the router and on the phone.
The hd2 is full of really stupid bugs!

Try to hardreset the PPC.
If it won't work, try to update your ROM to the latest available.
If it doesn't want to work, then try to connect to another WiFi without password and see the connection is successful.
If it works with an unprotected WiFi, try to connect to a different router but with protected WiFi.
If it works, then there is a problem with your router and I suggest to update your router's firmware.

funny wifi
the problem wit my hd2 is most of the time it shows wifi connected but i cant surf the internet and sometimes out of the blues it connects to the internet,cant figure out wats happening....

HI kholk, thanks for the help, ill work my way through it and hopefully get it sorted!

knightrider66 said:
HI kholk, thanks for the help, ill work my way through it and hopefully get it sorted!
Click to expand...
Click to collapse
Have you found the solution? I can help you my friend i had the same situation

I tried to connect yesterday my hd2 with my router. First it wasnt working aswell. Then i set the next things. Channel 9 (was auto), Encryption AES (was tkip and AES). Network mode is Mixed. Further have you installed Mac Filter? I installed this also. So if i have a connection thats it. I must fill in my macadres from my phone for i get fully connected.

Hi guys thanks all for you help call HTC UK support and their amazing advice was to do a full hard reset!
I really am having a lot of problems with this phone and i cant understand why their have been so many issues?!

Hi guys,
I have the same problem- HD2 shows it is connected, but no access to Internet(other- laptop, SE990 phone is connected and working OK)
For not to write about all, now situation is:
1. On router wrt54g2 temporary disabled wireless security, only mac filtering is on(laptop mac, SE mac, HD2 mac is allowed), router firmware is up to date
2.HD2 is like new after hard reset, no settings is done for connection to home network. HD2 wifi is on, looking for access points and connecting to only one available open network in my area- to my home network and shows it is connected but no access to Internet.
3. In router I can see all connected clients by mac. All 3(lap, SE, HD2) are connected. I use Network Magic software too but it is showing only my laptop and desktop are connected. SE is not connected according NM, but it is working OK.
P.S.
Do not know what else can help you in my problem(maybe some other router setting, but as other devices are connected without problems so maybe it is not important for now)
So only my HD2 can not access WWW
Can You guys help somehow please

I've got a similar problem with an HD2 over here. Wifi does switch on, but it just won't connect to my router. The cirkel that is supposed to show when connecting to a network doesn't show either. I'm using WPA2-AES security, and yes, i did use the proper network key. I haven't tried connecting to other networks/using an alternative encryption method because a lot of other devices will then have to be reconfigured and it's not my own place. My Touch HD and 2 laptop connect to the network without any problems. The only solution I came across until now is doing a hard reset, which I would rather not do... I'm using a stock dutch rom (V1.43). Is it possible that upgrading to the newer 1.48 will solve this problem?

Have you tried removing the wireless security password and trying again? Test to see if maybe you are indeed typing in the password wrong.
Also check your exception list on your router, it might be blocking any other devices coming in.

I have the same problem.. Get the spinning loading circle and thats it.. But if i turn my belkin wires g router running wpa2 off then straight back on again the phone connects fine. But if i then leave my house or disconnect from the network then try and reconnect it wont and have to do the same process again. Luckily im also running a speedtouch 585 modem router which the phone connects fine to.

hey maybe it takes only a WEP key and not WPA as most people have. this is certainly the case as mentioned in the Wifi router article below -
http://www.mobilityminded.com/5438/wi-fi-router-on-htc-hd2-application-overview

Again me
It seems that it is problem with my router. HD2 was able to connect to open wireless a.p. in my town and all sow to my friends router which is using WPA security. So my linksys is not compatible, or i will try some other settings on it, but as other router clients have no problems, i am loosing my hope to have my HD2 connected at home unless i change router. But then another problem- which router will be compatible with all my devices in prise range of 100$
And replying to blackheart2925 my friend is using wpa not wep, i do not know other settings on his router but it is not security problem.
One thing is strange for my HD2 shows it is connected, router shows mac of HD2 among connected clients, but only HD2 do not have access to internet

allann said:
Again me
It seems that it is problem with my router. HD2 was able to connect to open wireless a.p. in my town and all sow to my friends router which is using WPA security. So my linksys is not compatible, or i will try some other settings on it, but as other router clients have no problems, i am loosing my hope to have my HD2 connected at home unless i change router. But then another problem- which router will be compatible with all my devices in prise range of 100$
And replying to blackheart2925 my friend is using wpa not wep, i do not know other settings on his router but it is not security problem.
One thing is strange for my HD2 shows it is connected, router shows mac of HD2 among connected clients, but only HD2 do not have access to internet
Click to expand...
Click to collapse
how are you connected to internet is it router which dials to isp or you have made a broadband dial up on your desk top ...
if you have dial up shortcut on desktop then you can not use internet via hd then change setting in router
better way is hard reset router and then reconnect hopefully it will solve your issue ..........

commando0 said:
how are you connected to internet is it router which dials to isp or you have made a broadband dial up on your desk top ...
if you have dial up shortcut on desktop then you can not use internet via hd then change setting in router
better way is hard reset router and then reconnect hopefully it will solve your issue ..........
Click to expand...
Click to collapse
Router "dials" to my isp and share internet for all connected devices...
Yes, i am going to hard resset my router, but have not much hope i sucsess

PROB:
If your HD2 connects to router but you cannot enter any web site, do this:
SOLUTION:
enter your www router settings - wireless - access control - MAC Address Filtering Table ->>>>> add your HD2 MAC adress
enter your www router settings - firewall - access control ->>>>> add your HD2 MAC adress
so, you have to add your MAC adress of HD2 into router TWO TIMES into TWO PLACES!
I had the same problem and..... solved

can't connect to my home wifi

i got my new omnia 7 today and i can't connect to my home wifi router. i tried to disable security, tried wep.....but it allways says "couldn't reach wifi network" or "password incorect". i tried to reset my router and my omnia 7, but nothing helped.
thanks in advance!

today, i connected just fine on one open ap, and one wep protected ap, but i still can't connect to my home wi fi ap. really confusing. my laptop and old htc prophet connects just fine, but my new omnia 7 won't. any advice?
thanks!

ok, so since no one tried to help me here, i tried every single thing on my router and it seems that the phone can't handle b+g standards, so i switched to g allone and now i'm able to connect. i hope this will help someone else too.

Nice tip
Hey man,i guess no one had the problem or didnt know what to do,anyway i had a differrent problem,when i was close to my router (no more than 8 meters) my phone connected normaly to the wifi,but once i was in my room which is further away from the router the phone wouldnt connect although it showed the wifi router signal had two bars,i tried your method in switching to g only and it worked ,now i connect to my wifi with no problem,thx for the tip ,hope they fix the issue in mango,cheers.

phobius87 said:
ok, so since no one tried to help me here, i tried every single thing on my router and it seems that the phone can't handle b+g standards, so i switched to g allone and now i'm able to connect. i hope this will help someone else too.
Click to expand...
Click to collapse
I have the same problem with my wifi router.
My phone is HTC 7 Throphy.
I have to reset my router every time my phone needs to connect to it.
My router is configured for DHCP.
I noticed that if there is a wireless device connected to my wifi network,
my phone gives that error and cannot connect.
If I try to connect to a wifi network which is secured with a password,
I always get 'Incorrect password' message.
I try reseting my phone with no effect.
I'm still looking for a solution.

Same prob here....

princegoro said:
Hey man,i guess no one had the problem or didnt know what to do,anyway i had a differrent problem,when i was close to my router (no more than 8 meters) my phone connected normaly to the wifi,but once i was in my room which is further away from the router the phone wouldnt connect although it showed the wifi router signal had two bars,i tried your method in switching to g only and it worked ,now i connect to my wifi with no problem,thx for the tip ,hope they fix the issue in mango,cheers.
Click to expand...
Click to collapse
no problem man.
it seems that there are many troubles with wifi on windows phone 7 and many users are complaining. i hope too that mango will fix most of those issues. mango will bring possibility to connect to hidden network.
for other users posting on this topic, i suggest that they try switching to g standard only, becose i too had this incorect password message allways poping up before the switching. it can be done in the router web configuration interface. u get in usualiy by typing 192.168.1.1 in your adress bar.

phobius87 said:
no problem man.
it seems that there are many troubles with wifi on windows phone 7 and many users are complaining. i hope too that mango will fix most of those issues. mango will bring possibility to connect to hidden network.
for other users posting on this topic, i suggest that they try switching to g standard only, becose i too had this incorect password message allways poping up before the switching. it can be done in the router web configuration interface. u get in usualiy by typing 192.168.1.1 in your adress bar.
Click to expand...
Click to collapse
My router is on g standart only but I still get that error.

well, if you know what you'r doing, you could try different configurations in your router. play with the settings and see if it will work, but again, only if you'r sure you won't screw up anything.

I found a fix.
In my router settings I changed the Chanel from 6 to 10.
I think the problem is that I have too many wireless devices in a small room.

you lucky bastards with wifi connectivity.. i have a pppoe account on my wifi and there is no way for me to connect to it whatsoever.

if you have access to your router settings, you can change briged to routed connection.

for some reason, i can't access router! i tried contacting my ISP, did not want to die waiting for an answer.
but i remember trying to do that before, and not knowing how.
Could you post a link with the instructions, zemljak?

you have a pm.

phobius87 said:
you have a pm.
Click to expand...
Click to collapse
i dont know if you are receiving my pm's, i dont see it them in sent.

I have this intermittent connection on a netgear wireless router too, its set to use dhcp, and only fix is a reboot of the router.
I think the phone is storing an ip (dhcp assigned) which when you reconnect to your wifi may have been re-assigned (ip lease) to a.n.other device in the meantime.
So, lets say on Monday I obtained 192.168.0.2
didnt access the wifi for a day or so
lease expires (router)
a.n.other device connects, e.g. iPad, obtained 192.168.0.2 via dhcp
then you try and use your wifi on your phone and it doesnt connect.....
so I think it might be storing the ip address, rather than checking for a new one each time it connects, or something similar.

Over a half year I had the same problem. But now I fixed it, by simply change the wlan-key, because in my old key I had letters like ä, ö, ü. That didn´t work. May be this works for you.

FIX!
tchimev said:
I found a fix.
In my router settings I changed the Chanel from 6 to 10.
I think the problem is that I have too many wireless devices in a small room.
Click to expand...
Click to collapse
I started having the same problem with the phone prompting me that i had the incorrect password. I changed the channel in my router and now my Surround is connecting without hessitation! Thanks!

Hi,
I have Nokia Lumia 800 with Windows Phone 7.5 and also have problems with my home wifi connection. Firstly I had an old pentagram router and couldn't to connect with it, I tried WPA, WPA 2, WEP, WPA 2 mixed or even no security, always had the same problem, shows "network don't respond".
The phone itself connects to other networks, but not my home network.
I thought that it was problem with my router (but every other device had no problems with conenction, ipad, galaxy s, laptops or even TV), so I took another router (techniklab) and I have the same problem.
On both routers in "active clients" I saw the phone when it was trying to connect, logs looks like:
Code:
Aug 20 22:13:31 wlan0: WPA2-AES PSK authentication in progress...
Aug 20 22:13:31 wlan0: A wireless client is associated - 50:2D:1D:E2:8A:87
Aug 20 22:13:31 wlan0: Open and authenticated
Aug 20 22:13:53 wlan0: A wireless client is disassociated - 50:2D:1D:E2:8A:87
Windows on my phone is up to date, router firmware also.
I can add that from couple of days I have Windows 8 (on PC) and it also cannot connect to my router, could it be some problems in new microsoft windows??
Any suggestions?