Xperia x2 gps - XPERIA X2 General

Hi Guys!
Does anybody have experience with X2 GPS.
I can't make it work with TomTom or iGO.
It works fine with Google and GPS Test, but TomTom and iGO say GPS not found.
Any ideas?

What TOMTOM version do you use? In 7.9 there's an option called Other NMEA Receiver, when you select that it should detect your GPS automatically, and how long do you wait after selecting the device? Have you downloaded quickfix update?..sometimes it takes a while before it gets a signal..you can check if tomtom recognizes your GPS if the yellow/black ball is spinning at your GPS config

It seems that the Copilot live works properly. I have the same issue with TomTom and Igo. I tried to change SYS on Igo, forcing COM4 port but seems disconnected.
If you select in TomTom the other NMEA GPS and set up the UART Serial Port, seems that the GPS work but it disconect each second...
Any Ideas??

ivan_pp said:
Hi Guys!
Does anybody have experience with X2 GPS.
I can't make it work with TomTom or iGO.
It works fine with Google and GPS Test, but TomTom and iGO say GPS not found.
Any ideas?
Click to expand...
Click to collapse
GPSGate solves the problem!

I installed the GpsGate 2.6 but once I start the phone, it seems that is working, but sometimes the apps crash and you need to restart the X2. I tried too in Safe Mode, but the result was negative.......... Some Idea??

bazsikar said:
GPSGate solves the problem!
Click to expand...
Click to collapse
I couldn't get it to work yesterday.
Today I installed the latest update from SonyEricsson, i then installed GpsGate 2.6.
After this it worked.

I have the update applied too, but seems the app crash..... I have the battery level down now, I will try to restart the service once I finish the charge. Until the crash, the GpsGate and Nvigation software (TomTom and IGO) works properly.
Thanks....

jogrr1989 said:
What TOMTOM version do you use? In 7.9 there's an option called Other NMEA Receiver, when you select that it should detect your GPS automatically, and how long do you wait after selecting the device? Have you downloaded quickfix update?..sometimes it takes a while before it gets a signal..you can check if tomtom recognizes your GPS if the yellow/black ball is spinning at your GPS config
Click to expand...
Click to collapse
Thx for the advise!
Yes, the version is 7.9 and I have tried both built-in GPS and Other NMEA Receiver (with proper COM port) - no success!
I have waited long enough - I tried with Google and it was OK, plus I know how long it may take - I was using same version of TomTon on HTC Diamond, so...
Thanks anyway.

elpro said:
I installed the GpsGate 2.6 but once I start the phone, it seems that is working, but sometimes the apps crash and you need to restart the X2. I tried too in Safe Mode, but the result was negative.......... Some Idea??
Click to expand...
Click to collapse
I tried the GPSGate and it seems that this might be the solution BUT... You need to run it manualy (not to run after soft reset) - in this case it seems that it works. This applies to version 2.5 since this is what I have.
Will continue testing.

igo8 on x2
to make igo8 work you have to edit sys.txt file
[device]
type="alias_xperia"
[gps]
source="virtserial"
good luck

ivan_pp said:
I tried the GPSGate and it seems that this might be the solution BUT... You need to run it manualy (not to run after soft reset) - in this case it seems that it works. This applies to version 2.5 since this is what I have.
Will continue testing.
Click to expand...
Click to collapse
in settings -> advanced there is an option "Start GPSGate after soft reset"

bazsikar said:
in settings -> advanced there is an option "Start GPSGate after soft reset"
Click to expand...
Click to collapse
This is exactly what I had in mind - you should not use this option. It seems that GPSGate runs before GPS device is available so it doesn't work.
Meanwhile I tried the settings posted by og33 - it worked perfect so THANKS!

og33 said:
to make igo8 work you have to edit sys.txt file
[device]
type="alias_xperia"
[gps]
source="virtserial"
good luck
Click to expand...
Click to collapse
it worked with igo 8, do you have any fix for destinator 7 ? I've tried everything, all com ports and baud speeds ... and nothing.

Problems with GPS - Continue
Hello.
We have problems with the GPS and any "navigator" (TomTom or iGo) I use the GPSGate and run ok for 10 minutes, in these moment the GPS shutdown and the "navigator" show the message "no GPS device detected". I need restart the mobile and run correctly again for ten minutes.....
Anybody could help me?
BR.

marxbre said:
Hello.
We have problems with the GPS and any "navigator" (TomTom or iGo) I use the GPSGate and run ok for 10 minutes, in these moment the GPS shutdown and the "navigator" show the message "no GPS device detected". I need restart the mobile and run correctly again for ten minutes.....
Anybody could help me?
BR.
Click to expand...
Click to collapse
download the file below and replace it in the program folder of igo it worked for me. with igo after that restart your phone. uninstall gpsgate

Also have an X2 with TomTom and GpsGate, and it loses signal after 10 minutes. That's very annoying because I don't have any other navigation software and my Tytn2 just died...
Anyone knows the gps comm port number on X2? I found a soft called PortSplitter that is similar to gpsgate, but needs to manually enter the comm port.

Hello again.
I have copied the file in the igo folder and I continues with the problem, the situation is similar to "astm13", the connection with the GPS is lost 10 minutes after the "navigator" is running. Always 10 minutes.
Please help me!!!!

Try to change the input in GPS Gate : use WM GPS instead of GPD9. Seems to be working, I'll test during a long driving.
Edit : Just tried today during 2 hours, worked perfectly! Tomtom never lost the signal.

Hi All !
Does it make any difference where you put the code in the sys.txt for iGo8.
I have tried this and still no go. Google maps works perfectly, however iGo
any help is really appreciated.

Good news there may be a way to fix this.
Try the following: go to Settings / External GPS and from programs change the GPS program port to COM8.
For me that did the trick and now my iGo8 is working like a charm
I am using a X2 with official MR1 software installed.
If anything else comes up I'll post here

Related

TOMTOM 5 compatible??

considering getting tomtom5 for my mda compact.
anyone know whether its compatible, has anyone got it?
Should be. TomTom 3 and 4 worked fine.
By the way, Bakonl's release of TomTom 5 was just posted on alt.binaries.warez.pocketpc.gps, along with a few maps.
Benelux map only.. :x
TT5 does work
and not only benlux maps are posted. italy, france, germany, spain, uk are posted as well. rest will be posted as well i guess.
anyway, waiting for my legal TT5 to arrive (with the bt gps), woei =)
I can't get it working... I tried installing in the program files and in the storage card directories but it crashes at the end of the tutorial, just after that the "Welcome to TomTom Navigator" message appears in the map screen.
I can't see the map nor the GPS is able to connect (TomTom "3" Navigator Wireless).
I can't find any registry entry, I modified the currentmap.dat in order to point to /storage card/italia-map.
Anyone was able to reproduce my problem and to solve it?
Yeah, I noticed there are a few maps out. I'd like Scandinavia tho Seems like a buggy version too.. Crashes often.
Yeah... reeeeally buggy, I tried to check the post in the alt.warez.pocketpc.gps newsgroup for infos about bugs/problems etc. but I can't find it in my nssp server and using the web I'm not able to see the post (I can just see the header) so... I still can't use it :lol: ; maybe it could be a bad installer, I noticed that sometimes it won't install some cabs from the cd, or maybe it's just the italian map which is corrupt... who knows? 8)
I guess the release on alt.binaries is a preview or beta version.
The official release of Tomtom 5 will be end of June.
Im still waiting for Destinator PN on emule...
Where can i find the TomTom 5?
I have installed TomTom 5 to see if it works, I'm unable to connect my BlueTooth GPS (Holux GPSlim 236). The port does not show up on the device list under Buzz WM2005.
Does anybody know how to change this?
Ikkuh
I have installed TomTom 5 , I'm able to connect my BlueTooth GPS (Holux GPSlim 236) on port 4
work OK for me !!!
JesperR said:
Where can i find the TomTom 5?
Click to expand...
Click to collapse
www.tomtom.com
Stefan
bruxelles5 said:
I have installed TomTom 5 , I'm able to connect my BlueTooth GPS (Holux GPSlim 236) on port 4
work OK for me !!!
Click to expand...
Click to collapse
I had the same problem.... go to the bluetooth com ports, change the GSM to use COM8.
Then start -> settings -> gps, on the first tab set com4 and on the second tab tom com8. The thrid tab should have the checkbox set.
Now reset your device.
Start tomtom, goto your GSM setup, choose Other bluetooth, select COM4.
Now exit tomtom and reset your device.
Start tomtom and wait a while (can take a few minutes for it to find the GPS).
This worked for me (you need the resets in order to detect the com ports!!)
Ikkuh
@Ikkuh,
How can I change the Com port settings on my MDA Compact? I can't seem to understand you're solution. I need Com 8 and TT5 only has 2,4,5 and 9.
Thanks in advance!
dickr43 said:
@Ikkuh,
How can I change the Com port settings on my MDA Compact? I can't seem to understand you're solution. I need Com 8 and TT5 only has 2,4,5 and 9.
Thanks in advance!
Click to expand...
Click to collapse
There is a serial port multiplexer build in just for the GPS. It is under settings -> GPS, if you use this, you can create a virtual serial port, and attach it to the hardware GPS. If you do this and reset the device, the virtual GPS will show up in TomTom (in my case it did ;-) )
Ikkuh
I must admit dickr43 has got a point. Even though you are trying to be helpful, Ikkuh, it's a bit hard to understand.
Start tomtom, goto your GSM setup, choose Other bluetooth, select COM4.
Click to expand...
Click to collapse
There IS no GSM setup in TT. Most likely you mean GPS?
There is a serial port multiplexer build in just for the GPS. It is under settings -> GPS, if you use this, you can create a virtual serial port
Click to expand...
Click to collapse
Doesn't exist either. Must be some third party app you have installed...
dickr43,
Try removing your GPS pairing from the Magician. Go select the 'Bluetooth Setting' icon under Settings/System and make sure both the serial ports are activated. Note which COM port is 'Outbound', then re-pair with your GPS device. Start TT and in the GPS settings panel, you should get things running by selecting the COM port that was marked for Outbound.
Unless you are running some third party software with virtual BT COM ports, that should get you up and running. If you are, try each COM port one by one. Don't hurry through the ports, but give it time to connect. 5-10 seconds at least. Also make absolutely sure your GPS is within range and has a satellite fix, or you are wasting your time.
I cant use tomtom 5 as a route map
I just want to use it sometimes without the gps module is it possible. Because with the older version it was possible to select a GPS simulator.
THX :lol:
The "unofficial" versions of TomTom5 doing the rounds seem to have been taken from beta builds. I installed without any problems, but noticed a number of bugs (not recognising GPS, the program freezing, picking up wild GPS info, settings not sticking)... sometimes you'd think it was working, and you'd think you'd got it stable, but then they'd fall down.
I've tried 3 different versions doing the rounds right now and none of them are stable. I'll wait a month or so for a more finished release is available.
i got my hands on TT5 aswell, the program looks realy nice and lot improvement to TT3, but as mentioned above, it's not very stable, spontain exiting of TT5 is not cool when youre in the middle of no where.
my gps was recognized directley,
i just went to BT settings and checked Com5 and a messege apeared that i must bond with a compatible device, so i bonded with my GPS reciever and in the TT wizard i could chose Com5 and it connected right away, much easyer than TT3
regards.
Hi,
I am considering getting TOMTOM5 for my T-Mobile MDA Compact and would like to use this in my car. Does anyone know or can provide screen shots of what the display looks like? Is it easily readable while driving?
Thanks
Msuk

TomTom GPS Issue

Hi..When I set up my GPS device on my m3100 Tomtom nav 6 will work fine. However the next time I use it tomtom fails to pick up the gps device. The only way I can then get it working is by removing the gps device & re-adding it.
Anyone come across a similar problem, used to work fine on my old m600.
i have come across the same problem. I have to wait for a long time for the device to be connect with the gps receiver. Sometimes i get connected however the receiver cannot get gps signals. Someone plz guide us???
i've got a 838Pro with TomTom V6.010 and The BT-74R Bluetooth GPS Receiver i pick up of ebay.
works great no problems !!!
yep i got a Generic ebay ($60 AUD) bluetooth GPS and the only problem i have is running the POIs with the maps causes tomtom to freeze up (using version 6.03)
My TomTom only freezes sometimes during start up, but i've notice this happens when i have alot of apps open running in the background.
however thanks to this site i no longer have this issue as i've have installed "HTC X-Button 1.5"
thanks.
I think my problem is different to others, it not that it can take a long time to connect its that It will only connect the frist time I try after adding the GPS device as a serial port. I have been using COM 0.
paul8811 said:
I think my problem is different to others, it not that it can take a long time to connect its that It will only connect the frist time I try after adding the GPS device as a serial port. I have been using COM 0.
Click to expand...
Click to collapse
im also using COM0
the freezing issue went away on my TomTom (v6.0.30) when I installed AKU3.
Before I launch Tomtom, I have to start up VisualGPS which initializes the serial port and begins obtaining data from my Telenav GPS module. Try downloading it for yourselves - it's free!
Lancealot said:
Before I launch Tomtom, I have to start up VisualGPS which initializes the serial port and begins obtaining data from my Telenav GPS module. Try downloading it for yourselves - it's free!
Click to expand...
Click to collapse
yeah ive used this one before too its quite handy to make sure the gps is all happy before running tomtom
Lancealot said:
Before I launch Tomtom, I have to start up VisualGPS which initializes the serial port and begins obtaining data from my Telenav GPS module. Try downloading it for yourselves - it's free!
Click to expand...
Click to collapse
Ta will give that a go.
Just found this thread http://forum.xda-developers.com/showthread.php?t=282857&highlight=Tomtom
Describes the problems better then I did so will try the fixes in that.

Internal GPS problem HTC P6500

Hi all,
I recently purchased a P6500 and I installed Igo 8.When I enter the gps config menu it says that gps could not be found;if i hit the auto search button the device freezes.
I installed Port splitter 1.11 and I managed to gain something...the device doesn't freeze anymore but it still can not find the gps.I have no idea how to set up the com ports....the program port..the hardware port..I am confused...
(I also inst. Igo 2006 and works ok.)
I appreciate any help!!
Xman556 said:
Hi all,
I recently purchased a P6500 and I installed Igo 8.When I enter the gps config menu it says that gps could not be found;if i hit the auto search button the device freezes.
I installed Port splitter 1.11 and I managed to gain something...the device doesn't freeze anymore but it still can not find the gps.I have no idea how to set up the com ports....the program port..the hardware port..I am confused...
(I also inst. Igo 2006 and works ok.)
I appreciate any help!!
Click to expand...
Click to collapse
Hi, Xman -- I don't know this software and so probably can't really offer anything helpful. For what it's worth, the GPS seems to work fine on my P6500: both with Google Maps and with GPS-enabled photos on the HTC Camera app. Does your GPS work with those programs?
Sorry about your troubles!
Alan
I didn't try with Google maps because I'm interested in making Igo work .
At list tell me an app which can show me some info about the internal gps such as speed /the com port on which it's installed etc..
Thanks
Problem solved!!!!!!!
Solution? GPS Gate
I have also noticed the same problem running both IGO-2006 and I-GO 2008 on my 6500,on the other hand i have had no trouble whatsoever running Destinator 7 and Garmin ,i guess it's got something to do with the software and not the PPC itself which i must say has a very good GPS receiver.
Edit
Thanks for the GPS-gate idea.
Xman556 said:
Problem solved!!!!!!!
Solution? GPS Gate
Click to expand...
Click to collapse
Hey Xman556,
I've having the same problem with my HTC 6500.
Could you please be kind to tell me how to set up the gps gate so it well work ok with the iGo8.
Thank you
Gigino
Well I think I rejoiced too early.Today I took a longer trip and wanted to check how my new solution works......after catching speed the gps started disconnecting an reconnecting until I had to turn it off for good.So almost back to square one.....anybody who can help?
gigino said:
Hey Xman556,
I've having the same problem with my HTC 6500.
Could you please be kind to tell me how to set up the gps gate so it well work ok with the iGo8.
Thank you
Gigino
Click to expand...
Click to collapse
At input I selected WM GPS and after you hit open.
At output I have Gpsgate direct/virtual com2(all NMEA)/COM2/COM4
But as I said in my previous post...is not quite working.
Also you might check the franson's web site ..thy seem to have a nice support forum...if you find anything please share.
gigino said:
Hey Xman556,
I've having the same problem with my HTC 6500.
Could you please be kind to tell me how to set up the gps gate so it well work ok with the iGo8.
Thank you
Gigino
Click to expand...
Click to collapse
You mean that you have also problems with the Igo8?If yes do you have the original Igo or the cracked one?
Xman556 said:
You mean that you have also problems with the Igo8?If yes do you have the original Igo or the cracked one?
Click to expand...
Click to collapse
Hey Xman556,
it is a crack one at the moment untill I can get it to work properly then I'll buy it if not I'll just leave it.
The way I can get it to work is like this I start the iGo8 then I go to settings TMC and dp a search if return as no hardware fined then I go to GPS and put in the com port 4 and the speed 57800 and it work but if I do a soft rest the iGo8 well not work anymore until I change the GPS port in the PDA to a diffrent port like port 8 then the Igo8 well star and I have to do everything I did before go to TMC and so on if I try to go straight to the GPS without going to the TMC the system hang and I have to do a soft rest this is the way I got it working I'm using the version 4.1.506 if the Igo I tried the earlier version and it is the same problem I need a solution better than this.
Thank You
Gigino
As far as I see the problem is that the cracked Igo is not able to start the internal gps.
Here my new solution..this time is really working !!!
GPS TEST from chartcross...i start this program .it starts the gps then menu/minimize and after i start the igo.
Tell me if it works for u.
Xman556 said:
As far as I see the problem is that the cracked Igo is not able to start the internal gps.
Here my new solution..this time is really working !!!
GPS TEST from chartcross...i start this program .it starts the gps then menu/minimize and after i start the igo.
Tell me if it works for u.
Click to expand...
Click to collapse
Hey Xman556,
thank you for you suggestion it does work now it is much more easier after a soft rest.
Thank You
Gigino
I had this problem with I-go at first. When first installed selecting the gps port and or baud rate would lock the phone. Also if you did an auto detect it would also lock the phone. Solution, have gpsdash or google navigator running with the gps enabled (or anything else that works with the internal gps it seems). Without stopping the app start I-go and it will find and use the gps quite nicely.
Once it has done this the first time I never had to run anything else before I-go even after a reset. Tried this several times by fully reseting the 6500 and worked every time.
similar GPS problems with HTC P6500 and iGo
Hi all,
I'm writing from Germany and have similar problems with iGo 2006+ and iGo 8.
(I purchased iGo 8 just yesterday)
My (German) settings:
Settings --> System --> External GPS -->
Tab Program?:
COM4 for internal GPS, no external GPS via Bluetooth (see Attachment)
Tab Access?:
manage GPS automaticly: ON
What are your GPS settings?
- - -
What I have discovered:
- 1st starting iGo 2006+ and iGo8: both applications hang during 'starting'
- With Igo 2006+ I tried: 1st starting the app 'GPS Tuner', then starting iGo
--> It starts and iGo finds GPS on Com4 with maximum baud
(now I don' t have any longer 'GPS Tuner')
- With iGo8 I tried starting the freeware 'VisualGPSce' 1st (until GPS fix), then starting iGo8 --> It starts, I could set COM4, maximum baud...
--> so I think, is is an internal iGo/GPS-problem
- Today I could drive about 10 km with Igo8, then it crashes without any msg
You can see, I have similar probs, did u solve the probs meanwhile?
---
Rainer from Germany
cracked igo works fine on Sedna. from SD or InternalFlash.
I´m using GPSGATE.
Start GPSGATE, best automatically after reboot.
this will start the internal GPS.
Now you have 2 possibilities.
1. use the output port of GPSGATE, maybe Virtual Com1. You can select it in the options from GPSGATE
or
2. use Com4 from internal GPS. once startet from GPSGATE, it works.
you have to edit your sys.txt in folder programs....igo8
[gps]
port="1" or "4"
baud="38400"
it works definitly
Guenni
Latest news
After trying all kinds of programs(GPS port spliter,gps gate and gps test) I found that the solution with gpstest is the best.So I decided to perform a hard reset in order to install on my device only the useful software. But after the hard reset the gps would not start no matter what programs I installed. So I sent the device to HTC and they replaced the mainboard.
Now the IGO8 works perfect(together with GPSTEST-pls see my earlier posts).
GPS Text script
I too found GPSTest.exe useful because its really small.
Strange that iGo hangs when trying to communicate over the port *unless* you start another program and open up the GPS unit's port.
Sounds a lot like PPC/iGo GPS management issue.
Be that as it may, I created a script with MortScript, and then put this shortcut under my programs in "\Windows\Start Menu\Programs" on my PPC (I'm running WM 6.1 if you care).
The following script opens GPSTest.exe, launches iGo, then closes GPSText.exe after iGo shuts down;
iGoLaunch.mscr:
Code:
#OPEN GpsText.exe minimized
Run ("\Storage Card\Program Files\Chartcross\GPSTest\Bin\GPSTest.exe")
WaitForActive ("GPS Test", 5000)
Minimize ("GPS Test")
#Run (and wait until iGo closes)
RunWait ("\Program Files\iGO8\iGO8.exe")
#Close GpsText.exe
Kill ("\Storage Card\Program Files\Chartcross\GPSTest\Bin\GPSTest.exe")
After creating iGoLaunch.mscr, put this link (use notepad) into "\Windows\Start Menu\Programs"
iGo 8 GPS.lnk:
Code:
1#"\Storage Card\iGo8\iGoLaunch.mscr"?\Program Files\iGO8\iGO8.exe, -101
Please note: If you decide to use this script and shortcut, I highly suggest you check the paths/filenames for accuracy.
GPS and WM 6.1 upgrade
Hey guys -- this may well not be relevant to the issues you're dealing with -- I don't use iGo -- but there is a HUGE improvement in GPS reception with the Windows Mobile 6.1 upgrade. My Sedna used to have a very difficult time getting GPS reception: it often could not find a signal despite repeated attempts. But since the upgrade, it's been locking on quickly and consistently.
Thought I'd pass this on in case it's helpful.
Alan
very simple script
once the GPS is initialized for the first time it will work
I've wrote a script for MortScript. The only code is:
WriteFile( "COM4:",x )
This script only sends something (here x) to COM4.
Then COM4 is used for the first time and will keep on working.
I start this script in autostart.
That's all.
Please regard uppercase and colons when writing "COM4:"
Bye
Guenni
Solution for port splitter
You can use port splitter for your gps. here is the process i went through with my HTC (jade). first i used gps gate and figured out that the internal gps is using com4. since gpsgate is not free and had to stop using it I tried port splitter
simply install port splitter on your pda
under INPUT-> PORT: com4 and Baud: 4800 (you might have to type COM4 yourself)
under OUTPUT-> select com1 on the drop down menu and press ADD
then press Start Splitter
and it should work
if not install gpsgate and figure out what port it is using and than use port splitter.
This should save you some money
Greetings
Macula

GPS problem after ROM upgrade

Hi
I just flashing my cruise with the new official HTC Rom(French).
Now my gps won't work anymore. Everytime i setup my GPS port(com1-com9)in parameter "External GPS", the parameter are not saved.
Tomtom say: "no GPS device"
any idea
Thanks
PS: sorry for my bad english!!!
After flashing always make a HARD reset ( push gps button and explorer button and reset button with stylus then push green button 2 times ) and it 'll solve all your probleme
Thanks
but i does not change anything.
I just perform a hard reset and always unable to save my gps port parameters.
any other idea?
Your gps doesn't work or you can't save the port on windows gps settings?
i can't save the hardware port on windows gps settings
Why do you want to save it , when you launch tomtom/igo they found the gps automaticaly and it works fine.
There might be a problem with the settings in "External GPS" (under "connections" menu).
In my case it shows COM4 (programs tab) / (none) (hardware tab) / Manage GPS automatically (access tab)
And ofcourse both Tomtom and IGO8 are configured to use COM4.
if i am not configuring the GPS com port, tomtom are not able to find GPS device: "No GPS device found"
I try "Integrated GPS Device" and " GPS NMEA" with the same result.
I use TomTom 7.450.9028
I also use TomTom 7.450.9028 (and iGO8) with no problems........
My device is configured to use programs => COM4, hardware => (none) as I told you. Sorry if I can't help you more than this.........
i try the same parameter as you... and it works!!!
thanks
Nice to have helped you!
69Absolute said:
i try the same parameter as you... and it works!!!
thanks
Click to expand...
Click to collapse
I knew it, i was looking for the settings.
Radio 1.59.42.15 seems to play havoc with Destinator
After upgrading a Polaris to the most recent HTC Official WM6.1 ROM (Portuguese) I started having problems with Destinator 7.
The device detects the GPS signal and then loses it every 20 seconds or so. If you go back to the GPS settings in Destinator, you see that the GPS Antenna is OK, with 7 or satellites, and then you go back to the map and it works for a while (another 20s) before it loses GPS signal again.
I tested this on 3 HTC Cruise and it is always the same.
I tried upgrading the radio but that didnt work because Radio 1.64.xx.xx doesnt seem to work on this ROM (no sound on calls, poor GSM/3G reception).
I also tried Radio 1.58.21.23, and that still gives me problems with GSM/3G.
Here is the info on the HTC ROM
R 1.59.42.15
G 25.69.30.05H
D 3.13.00.00
Has anyone been through this and found a way out?
Thanks
Andre
Did you try this Radio Rom?
http://forum.xda-developers.com/showpost.php?p=2787760&postcount=262
It seems to be a better/newer one
Tried the ROM but
Scotty, thanks for the suggestion - that didn´t help, though.
Now, here´s the funny part: I decided to use Destinator 6 and guess what? It worked like a charm: 8 satellites in 30s, no loss of signal. Go figure!
Destinator 7 works on all other HTC devices and used to work on the BetaPortuguese ROM I had. I don´t really understand why the radio messes up with GPS so much. Still, I´m glad I found a solution.
Thank you for the support!

TOMTOM Instalation HELP!!

I'm trying to install tomtom on my diamond. I've copied the program onto my phone and while running the .exe application it asks to select a GPS device. It has four option .... "Bluetooth reciever","tomtom bluetooth", "some wirless reciever", "one other one" it doesnt have an internal gps. I've tried all these and none seem to work, they all say no gps found.
2mas_army said:
I'm trying to install tomtom on my diamond. I've copied the program onto my phone and while running the .exe application it asks to select a GPS device. It has four option .... "Bluetooth reciever","tomtom bluetooth", "some wirless reciever", "one other one" it doesnt have an internal gps. I've tried all these and none seem to work, they all say no gps found.
Click to expand...
Click to collapse
hi what version of tomtom are you useing?
2mas_army said:
I'm trying to install tomtom on my diamond. I've copied the program onto my phone and while running the .exe application it asks to select a GPS device. It has four option .... "Bluetooth reciever","tomtom bluetooth", "some wirless reciever", "one other one" it doesnt have an internal gps. I've tried all these and none seem to work, they all say no gps found.
Click to expand...
Click to collapse
I think that a diamond (because it's a VGA display) needs a recent'ish version of tom tom, so maybe your fault is caused by trying to install tom tom 5 or 6.
Try "searching" the forum as I'm sure a cab of a diamond working tom tom is posted a few times in a few threads & the maps you obviously need to buy/ purchase on your own.
Hope this helps
im using tomtom6 it works fine on the htc touch. when setting it up it asks to select your gps receiver, it has other NMEA GPS receiver, tomtom bluetooth gps receiver, tomtom wired gps reciever,other bluetooth gps receiver, now which one do i choose and can you give me a set by set process of setting it up from here. I've tried them all and even downloaded quickgps and still in the tomtom home screen in the bottom left have the words 'No GPS device!'. i cant seem to get it to work can you help.
2mas_army said:
im using tomtom6 it works fine on the htc touch. when setting it up it asks to select your gps receiver, it has other NMEA GPS receiver, tomtom bluetooth gps receiver, tomtom wired gps reciever,other bluetooth gps receiver, now which one do i choose and can you give me a set by set process of setting it up from here. I've tried them all and even downloaded quickgps and still in the tomtom home screen in the bottom left have the words 'No GPS device!'. i cant seem to get it to work can you help.
Click to expand...
Click to collapse
go settings, systems tab, external gps, note the gps program port.
in tomtom, choose other NMEA or other bluetooth gos receiver, choose the port u saw in the settings.
should work...might need to wait a while..
gdluck,
2mas_army said:
I've tried them all and even downloaded quickgps and still in the tomtom home screen in the bottom left have the words 'No GPS device!'. i cant seem to get it to work can you help.
Click to expand...
Click to collapse
The first fix can take up to 5 minutes to be found or even longer from what I've heard. Leave your phone on a good location (outside) for a while and be patient.
Zjoske said:
The first fix can take up to 5 minutes to be found or even longer from what I've heard. Leave your phone on a good location (outside) for a while and be patient.
Click to expand...
Click to collapse
It wouldn't say 'No gps device' but 'waiting for a valid GPS signal'.
PS. If you still can't get it to work, check if any other programs using GPS are running in background.
tomtom gps
select other gps and the normally port 4 it will start searching for gps signal, ensure the icon in top right corner is rotating, also go out doors and it start picking up a few satelites, and bingo!!!
UK & Dutch users wondering why the postcode finder only uses the first digits and then needs a manual street entry should see
http://www.tomtom.com/support/category.php?ID=1&Language=1&FID=9852&TT=
d/l the file and put the whole zip folder into the root of internal storage, and it all works properly

Categories

Resources