Related
first thing done to the phone was to use Hard-SPL-V7 then I used OS 5.2.20924 (Build 20924.1.5.0 PV DVH) Black(Full) BS V27.exe changed to Schaps_WM6Pro_WWE_3.57a_Full_28-07.exe
phone work great radio was fine for a week and lost it yesterday change back to Hard-SPL
I can't load any radio alone but loaded full roms tried RUU_Hermes_CINGULAR_WWE_2_1_.15.502.3_6275_1.40.30.00_108_Ship loads all the way but no radio
Are you sure the stock rom had a radio rom in it? If you got from here and tried it may have been a stripped rom. Try running the Shipped ROM. It may recover or may not. Radio roms are the Achille's heel of the Hermes...
hi dear Ultramag69
i have same problem with jasjam model(i dont have radio-imei-protokol)'can u help me & say what model of radio rom must i install on my devic.pleas if u know send me some web linke for downlod .
i have a puestuion too.how can i install telestra roms on device by micro sd pattern becuse that file is exe file & dont have nbh(that i need to cheng hermimg)
thanks
please help me
ultramag69 said:
Are you sure the stock rom had a radio rom in it? If you got from here and tried it may have been a stripped rom. Try running the Shipped ROM. It may recover or may not. Radio roms are the Achille's heel of the Hermes...
Click to expand...
Click to collapse
hi dear Ultramag69
i have same problem with jasjam model(i dont have radio-imei-protokol)'can u help me & say what model of radio rom must i install on my devic.pleas if u know send me some web linke for downlod .
i have a puestuion too.how can i install telestra roms on device by micro sd pattern becuse that file is exe file & dont have nbh(that i need to cheng hermimg)
thanks
satriani22, right click on the .exe file . It should have the option to "extract here". This will give you all the file. I believe you will need to search through the folders to find the RUU_Wrapper.nbh file.
Copy to an sd card formated FAT32 (must be 2Gb or less) and rename to Hermimg.nbh. Put in Hermes & reset to bootloader. Follow the prompts.
YOU MUST HAVE HARD SPL INSTALLED TO DO THIS.
This is not a sure fire way to fix this problem, you may not be able to fix this...
Make sure you flash the SHIPPED STOCK ROM, not just a stock rom from anywhere.
Good Luck...
Any Idea or link where I can get the stock radio could use the help still a little lost ..
What carrier supplied the device? If it was AT&T, doo a search for the AT&T ROM. I don't know if they still have an upgrade on their site as most carriers don't support the Hermes anymore.
Radio
downloaded radio1.54.07.00 which is strip out of AT & T rom tried from computer to flash fail loaded the RUU_signed.nbh renamed it to hermimg.nbh copy to sd tried gets about a quater of the way and locks up any ideas ?
Sorry I didn't get back to you yesterday mate, bit busy.
I hate to be the bearer of bad news but it may be that you have a permanent brick on your hands....
The radio rom is the number 1 cause of permanent bricks. If the memory area of the radio is corrupted then its impossible to fix. I have yet to see ANYONE say that they have permanently recovered the radio rom successfully.
Hii i have elfin and not unlocked my elfin but still i can load any rom in my elfin have loaded 6.1,6.5,and many more.
Want to know will be posting procedure to SAFELY can be loaded in to your HTC MOBILE
miteysh.
mitesh20360 said:
Hii i have elfin and not unlocked my elfin but still i can load any rom in my elfin have loaded 6.1,6.5,and many more.
Want to know will be posting procedure to SAFELY can be loaded in to your HTC MOBILE
miteysh.
Click to expand...
Click to collapse
can u please put a little more light on this
mitesh20360 said:
Hii i have elfin and not unlocked my elfin but still i can load any rom in my elfin have loaded 6.1,6.5,and many more.
Want to know will be posting procedure to SAFELY can be loaded in to your HTC MOBILE
miteysh.
Click to expand...
Click to collapse
couple of questions I wanna ask u..
1. when u bought ur device was it a brand new one or a used one??
2.are u sure ur device is not locked?? did u check you your IPL??
3.what is your IPL/SPL compination??
hope that's not much.. thanks
and by lock, are we talking about cid-lock or sim-lock?
crapula512 said:
and by lock, are we talking about cid-lock or sim-lock?
Click to expand...
Click to collapse
Yeahhh... i was thinking about it too
Answers!!!!!!
I bought my elfin in the year 2008.
not knowing how to use after few months i flashed elf rom and found that my device was restarting and of no use....
i learned about unlocking from this website after seating hours and hours.
i have gsm one.
elfin.
How to flash any rom...
I have original rom loaded and with ipl/spl of 2.xx
but now i have ipl/spl 3.14.com.
loaded more that 100's of roms of 6., 6.1, 6.5.
any rom.
first of all you need to know your device configuration to load any rom.
if you have detailed configuration then you can load it.
currently loaded wm6.5 28011 onyx. rom.
radio : 3.34
procedure!!!!!!
i will be enclosing the safe procedure for flashing...
no worry.....
you will learn to load and make your own flash...
give to few days time..
mitesh20360 said:
I have original rom loaded and with ipl/spl of 2.xx
but now i have ipl/spl 3.14.com.
loaded more that 100's of roms of 6., 6.1, 6.5.
any rom.
first of all you need to know your device configuration to load any rom.
if you have detailed configuration then you can load it.
currently loaded wm6.5 28011 onyx. rom.
radio : 3.34
Click to expand...
Click to collapse
if your spl says spl 3.14.com.... it means you have done HSPL... and thats the normal thing everybody do to go in for safe cookedroms flashing..
sorry bro there is nothing special about your case
opss!!!
but i have changed he ipl/spl/radio/flashed/many roms/ changed pagepool file/ all that can brick a fone..
i have recently edited the onyx rom 6.5 28011 and flashed for my htc
if you want you can also just i will put links n procedure to flash the rom.
ok. so will you put the links to the procedure. well coz after upgrading ur spl/ipl you can flash any rom you want.
reply
srgudhka said:
ok. so will you put the links to the procedure. well coz after upgrading ur spl/ipl you can flash any rom you want.
Click to expand...
Click to collapse
well
i not that i can load any rom my making rom.
like wise any specific rom i s made for specific mobile so as i make any rom specific for my mobilbe and even fon's battery level is 10% then also i can easily flash rom its in secs. and easily configure my cell easily..
mitesh20360 said:
well
i not that i can load any rom my making rom.
like wise any specific rom i s made for specific mobile so as i make any rom specific for my mobilbe and even fon's battery level is 10% then also i can easily flash rom its in secs. and easily configure my cell easily..
Click to expand...
Click to collapse
rather than keeping it a secret you should share your knowledge. everyone know one can cook a rom and flash it on his mobile. i suggest please be clear with your english.
no secret
sorry for my bad english.....
give me few days i will have to give link to software and procedure.
if any thing goes wrong with procedure then cell will brick and have hard format with no data in it.!!
so
its not any secret it is for knowledge.......
any can do it...!!!
Procedure for flashing (how i am flashing rom)
I have phone elfin 128mb ram.What you want softwares:
1) device info software for information regarding your device.
2) rom extractor... htc rom image editor version 0.4.0.51
AnDim
3) ROM builder. With this tool you can build a ROM (*.nbh)
from a rom parts (*.nb) in a comfortable interface.
by - Alexander "Dark Simpson" Simonov.
you can flash rom compatible with your CID (country/caller id) i.e. rom that you are going to flash must have cid of your phone.
steps:
Connect your Phone and establish Activesync Connection
find following for flashing:
Device ID : ELF0******
CID : ur cid. of phone.
GSM.nb radio file
IPL_H3.nb ipl h3 file
OS.nb os file extracted from built rom.
SPL.nb spl file
For deviceID you need to have software called deviceinfo.exe
http://forum.xda-developers.com/showthread.php?t=418892&page=18
download link: http://forum.xda-developers.com/attachment.php?attachmentid=129675&d=1258726424
then download any rom say onyx 6release. latest.
http://www.mediafire.com/?vjey0kz5ng0
then you will get RUU_signed.nbh
extract OS.nh from RUU_signed.nbh
save to one folder.
then you will need.
GSM.nb radio file
IPL_H3.nb ipl h3 file
SPL.nb spl file
extract same from follwoing links:
radio: http://forum.xda-developers.com/showthread.php?t=527048
choose as per yuor choice.
same extract
GSM.nb from *.nbh and save to folder.
similarly do for ipl/spl.
so you have following files needed for making your compatible rom:
IPL_H3.nb ipl h3 file
SPL.nb spl file
GSM.nb radio file
OS.nb os file extracted from built rom.
Step 2:
Now make rom for your elfin
you need to have software called
ROM builder. With this tool you can build a ROM (*.nbh)
from a rom parts (*.nb) in a comfortable interface.
Alexander "Dark Simpson" Simonov
link:http://www.real-radio.ru/htcrt/download/htcrt.zip
download the tool run in your pc, a pic that i have attached of that software.
then
run htcrt.exe
then start,
then ROM builder,
choose ur phone.
in that choose the relevant options for your phone/requirement
put Model ID:, Country ID:, Version: 3.14.706.02
language:WWE
firmware contents:
load all that you have stored in your folder the files you want.
IPL_H3.nb ipl h3 file
SPL.nb spl file
GSM.nb radio file
OS.nb os file extracted from built rom
then press
Build!
you will find that you have give name to your file named it
RUU_signed and it will make rom for your phone.
after it is completed it shows everythings seems to be ok
then close you have build your own rom compatible with your mobile.
RUU_signed.nbh
now flash it to your mobile.
how will you?????
steps:
have custome ruu files in one folder
following files must be there:
RUU_signed.nbh
EnterBootloader.exe
ErrorBattery.fig
ErrorUSB.fig
ModelID.fig
rapitool.exe
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
Temp.bat
then run
ROMUpdateUtility.exe..
must connect your phone through usb.
start your phone pressing camera key you will see triple colour screen showing ipl/spl/
blue,green,red.
flash it from pc.
after every thing is over your will get message update complete.
your will get your rom flashed. but every data before flash must be back up.
this is bit lengthy but easy to use and flash....
if found probs reply me
well good one. tried it. works. but this is a lengthy process. rather dont you think cid unlocking it once will allow you to flash as many roms as you want. once you have unlocked it you just need to a custom ruu and a rom file. thats it. rest you know how to go about. i appreciate your method.
edit: wrong post - plz delete
Salve! I have a SIM lock Elfin KPN Netherlands. You can unlock? Not allow me to rewrite the IPL and SPL.
Hi..
Tried the latest Android Froyo build on my phone with some interesting results.
I downloaded Froyo, copied the Android folder to my SD card, hit CLRCAD and then Haret. Froyo started booting, but after 4-5 lines all stopped. There was nothing happening after 15-20 min, so i pulled the battery, and started the phone again.
Now i get the message (in Norwegian)
"The file <filename> cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found. If the problem persists try reinstalling or restorig the file"
The problem is that none of the programs installed on the SD-card runs. They all get the above error.
I can not install any programs (reg editors) because i again get the above message. My registry editor that is already installed wont work, and i can not install anything.
I have tried Googling the problem and i've also searched the forums here in XDA. But i have not found anything that actually might work, because they all wants to install something. I can not install anything, and all of my 3'rd party apps doesn't work.
How do i disable the certificate verification without having to install anything or run any 3'rd part apps??
Is there maybe any program that i can run from my Win7 computer??
Thanks for all informing answers..
Certificate problem?
Exactly the same thing happens to me. Bump!
I'm also having this problem, seems to affect .exe files regardless of whether they are on the SD Card or on the device itself. Same cause as well.
2 reasons may be:
Either you run a stock rom and you need to install certinstaller search here on xda or run a custom rom
Or the sdcard is corrupt so you have to reformat
When you post issues pls give details as well like what hspl, rom, radio you use so people could help you out
Sent from my HTC Desire using Tapatalk
Stock Rom
juicecultus said:
2 reasons may be:
Either you run a stock rom and you need to install certinstaller search here on xda or run a custom rom
Or the sdcard is corrupt so you have to reformat
When you post issues pls give details as well like what hspl, rom, radio you use so people could help you out
Sent from my HTC Desire using Tapatalk
Click to expand...
Click to collapse
Hmm, yeah, it's a stock ROM (for now). I cant't install anything so the certinstaller can't help me.... Now i have to find out how to run a custom ROM.
I have also reformatted the SD-cart with no luck.
My (for now) stock phone:
Manila: 2.5.19211619.0
ROM: 1.66.409.1 (76641) NOR
Radio: 2.06.51.07
Using a custom ROM as a base for Android will heed much better results.
Full instructions for flashing a custom ROM are found here (and here for TMOUS HD2).
^^^ Also I notice you have an old radio (2.06). I'm quite sure you need a 2.10 or 2.12 radio for Android...most people seem to have had the best results from 2.12. You will learn how to do that in the link above I just gave you.
As well, there are programs that allow you to edit the registry while connected via activesync that don't require installing anything on the phone.
Case closed
Well, it seemed like a good time to reset the phone now...
While having this problem, i upgraded the SPL with no problem.
Downloaded the newest Dutty-rom, and tried to upgrade, but because no 3'rd part progs will run, this didn't work. I had to hard reset the phone, and then upgrade the ROM and then the Radio.
Everything seems OK so far...
Thanks for all replies
any luck? i m having the same problem
Ok, every worked fine my Phone details are:
OS version 5.2.21864 (21864.5.0.81)
Manila version 2.5.19202525.0
Rom version 1.43.110.2 (70315) WWE
ROM date 10/28/09 Radio version 2.12.50.02_2
Protocol version 15.40.50.07U
HSPL3 installed
Have cleared all added apps, factory reset, formatted sd card but android won't start left for 30 mins each time once overnight tried 5 times so far, with 3 diffrent builds seems to be doing something has got some failed script e.g.: failed to allocate the storage and something to do with e2sck1.41.4 Seems to be liking the battery alot in the script a page worth.
Any ideas?
Try to install the new official 3.14 HD2 rom en put a folder on ur SD card called "Android" and in that folder all the correct files. Maybe that works for u
Downloading now will give that a try.
Your radio MUST have .50 in it, not .51. I would suggest making sure you have a compatible radio or you will be wasting your time...
Ok that rolled back the radio, so have tried to re-install custom RUU and won't let me install the radio again and it won't install...pants. (edit) have found tha HSPL need re-adding, have now installed custom RUU still not loading android....
gets too:
Superblock invalid / mount failed
loads of script about the battery
Any idea?
Oh yes happy to admit I am a n00b at this.
Traffic187 said:
Ok that rolled back the radio, so have tried to re-install custom RUU and won't let me install the radio again and it won't install...pants. Any one else got an Idea?
Click to expand...
Click to collapse
What HD2 do you have in the first place? Assuming you have TMO-US HD2 according to the radio version you described here is what you need:
HSPL3 installed (make sure that you chose 2.08 in the drop-down menu);
CustomROM based on 3.14WWE latest T-Mobile / HTC update;
Radio Version you should go with is 2.15.50.xx;
and depending on what Android Build you go with place "Android" folder on the root of your sd card. If it does not load, try to delete Android folder and then copy only the content of the Android folder into the root of the sd card... it really depends how devs make it to work...
I got HSPL3, Energy 2.5GTX 3.14, Radio 2.15 and HyperDroid 1.7 with mychprima's kernel OCd and UVd - and everythign works perfect.
If it still gives you problems you have probably messed up in the beginning with HSPL maybe or something...
Sorted, lol I am UK not use was install HSPL3 I needed 2 Thanks for your answer I am sure others will find it most useful. Cheers
hello,
I have a problem with Android installation, the 1st things is CLRCAD wont launch, and when i start Haret, it shows the black screen (which is normal) then it take a while and finaly just reboot the phone into Windows OS,
to make it clear,
I searched the forum before posting
I tried many android version, and it's all the time the same problem,
I was using android on my phone before
I formated the SDcard
My phone is flashed, and I'm using Enery ROM
if any solution, please help,
clrcad is an executable that won't actually launch anything, you just run it and then move on to haret.
you reformatted the card and searched, so that's good, but starting a thread definitely isn't the right way. ask in the Q&A or in a relevant thread would keep the place clutter-free.
anyways, you have the Android folder on the root of the sd card? the instructions for each build will be clearer, but most follow this rule. have you also tried another sd card, just in case?
bravo261 said:
clrcad is an executable that won't actually launch anything, you just run it and then move on to haret.
you reformatted the card and searched, so that's good, but starting a thread definitely isn't the right way. ask in the Q&A or in a relevant thread would keep the place clutter-free.
anyways, you have the Android folder on the root of the sd card? the instructions for each build will be clearer, but most follow this rule. have you also tried another sd card, just in case?
Click to expand...
Click to collapse
yes i have the android folder on the root of my card,
yes i tried an other card
yes i do follow instructions all the time
hopefully someone else will reply then. i'm also using an energy rom, and i just hit clrcad and then haret and i end up booting into android after the initial setup time.
what is your radio version?
some radio version dun work with android. my radio was x.xx.51.xx and droid won't install.
flashed to x.xx.50.xx_x and droid loaded like a charm.
btw,i also loaded energy rom,then did the things you did.only found out that my radio was the problem.flashed that and now on mdj's droid clean...
the only thing now is droid on nand...then its blissssssssssssssssssssss
frostmore said:
what is your radio version?
some radio version dun work with android. my radio was x.xx.51.xx and droid won't install.
flashed to x.xx.50.xx_x and droid loaded like a charm.
btw,i also loaded energy rom,then did the things you did.only found out that my radio was the problem.flashed that and now on mdj's droid clean...
the only thing now is droid on nand...then its blissssssssssssssssssssss
Click to expand...
Click to collapse
i also have .50 for the rado version and i tried many ROMs but no luck, i also reflashed my phone
abdostar said:
hello,
I have a problem with Android installation, the 1st things is CLRCAD wont launch, and when i start Haret, it shows the black screen (which is normal) then it take a while and finaly just reboot the phone into Windows OS,
to make it clear,
I searched the forum before posting
I tried many android version, and it's all the time the same problem,
I was using android on my phone before
I formated the SDcard
My phone is flashed, and I'm using Enery ROM
if any solution, please help,
Click to expand...
Click to collapse
have you tried doing a task29? if you have one of the SD card adapters for the microSD you can plug it direct into your computer and use windows to do the FAT32 format (not just FAT, make sure its FAT32) and reflash your preferred radio and rom combo for winmo. then drop on a fresh copy of android and run it. (i recommend redownloading your favorite build as well)
also......
why did you post the new thread here in development? thats breaking one of the biggest forum rules you say you always follow..... sad.
Check you RAM in WM. If it's 320mb, you can't run Android for now...
Sent from my Desire HD using XDA App
malaeus said:
have you tried doing a task29? if you have one of the SD card adapters for the microSD you can plug it direct into your computer and use windows to do the FAT32 format (not just FAT, make sure its FAT32) and reflash your preferred radio and rom combo for winmo. then drop on a fresh copy of android and run it. (i recommend redownloading your favorite build as well)
also......
why did you post the new thread here in development? thats breaking one of the biggest forum rules you say you always follow..... sad.
Click to expand...
Click to collapse
all done but still the same problem, task29, update radio, update ROM, flash,
what is the model of your fone?
this should have been the first question i should have asked.
i know i assumed you have a htc leo since you posted here but i just want to make sure.
and give us details.as much as you can.
frostmore said:
what is the model of your fone?
this should have been the first question i should have asked.
i know i assumed you have a htc leo since you posted here but i just want to make sure.
and give us details.as much as you can.
Click to expand...
Click to collapse
- htc leo 576 MB RAM size
- Manila version 2.5.20181527.0
- radio 2.08.50.05
- Rom thedarkone (dexter)
- Model # HTC HD2 T8585
- OS 5.2.23148
I am running my HD2 on the stock ROM: RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe with SPL 3.03 (Stock, not HSPL). I read carefully instructions, and followed all steps, I am not going to describe them, used following Android build [30.11.2010] MDJ FroYo HD v. 4.0 [Kernel: MDJ S7.3HD].
After Haret.exe HD2 reseted, and there was only white screen with HTC logo quite a while. I soft reseted the phone, and after that reset almost all programs are unable to start, with following message: "The file ‘cecmd’cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found". It does not mean where are they installed, SD card or Phone storage. But not all of them, e.g. Opera 10 still runs. It also refuses to install new programs, installation process immediately ends, with "Installation was unsuccessful" ((
I digged the forum, and somewhere it was proposed to change registry value:
HKEY_LOCAL_MACHINE\Security\Policies\Policies DWord = 0000101a - Change value from 0 to 1
But I can not do so: I can not run the registry editor, which I have on my HD2 (Total Commander), I can not install new, or install a tweak, and also when trying to edit registry from my PC through activesync connection with CE Registry Editor and Mobile registry editor it returns with error "access denied".
I do not want to make hard reset. I think there should be a solution, other than HR or flashing new cooked ROM.
Thank you in advance.
Uta
abdostar said:
hello,
I have a problem with Android installation, the 1st things is CLRCAD wont launch, and when i start Haret, it shows the black screen (which is normal) then it take a while and finaly just reboot the phone into Windows OS,
to make it clear,
I searched the forum before posting
I tried many android version, and it's all the time the same problem,
I was using android on my phone before
I formated the SDcard
My phone is flashed, and I'm using Enery ROM
if any solution, please help,
Click to expand...
Click to collapse
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
1) Download following file: http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
From archive we need only SDA_ApplicationUnlock.exe
It allows Registry to be edited from PC.
Run it with working Activesync connection
2) Download Mobile Registry Editor: http://www.zipsoft.ru/catalog/mobile_registry_editor-v1_11.html
Also run with working Activesync connection
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
FYI, here are some other useful software packages that relax the security.
http://forum.xda-developers.com/showthread.php?t=285344
http://www.internet-tools.co.uk/blog...tegory/mobile/
http://www.internet-tools.co.uk/blog...sda_unlock.zip
http://sedacka.saman-cz.com/ppc/inde...unlocking.html
http://forum.xda-developers.com/showthread.php?t=338433 --- the first file in this article.
4) Restart
P.S. Special THANKS to JZ SmartMort
Hi - I think your response here may have answered my thread as well The end of this dream..
http://forum.xda-developers.com/showthread.php?t=859504
There one thing you can do to run Android on your HD2. yes, I have an HD2 too and currently T-Mobile. 8 month experience with it.
I noticed your Radio is 2.08. There is a latest version which is 2.15.50.14. If you flash your radio, it might going to work. Try it though.
Since you already got HardSPL, you are good to flash radio. Get the 2.15.50.14 in the link: http://forum.xda-developers.com/showthread.php?t=611787