Database Users

Dead Dutch HTC 3300?

Hi Guys,
I have searched the forum, but no solution for my problem. I had a dutch htc 3300. My device is not unlocked. I have tried to flash the pdamobiz rom to my device and since can`t get by the splash screen. STUPID!!! I can get into the bootloader but I need the original dutch rom to flash. Can anybody upload please? Cannot do anything with it now.
If I am right, there is no way to unlock the device in this situation!?!
Any suggestions?
thanks

Exact same issue a couple of hours ago.. see my Help Desperate post below this one.. it worked for me.

how
What exactly did you do? I did not understand your thread. How did you unlock your device?
What is meant by this:
not your flashing one, but clean bootloader, by hardreset followed by record and reset
thanks

Wait
Hi Guys,
Is there not a solution? Do I have to wait for HTC to release a dutch rom upgrade? I still don`t understand why the Pdabiz rom killed my device?
Please help me out
thanks

hakanos said:
What exactly did you do? I did not understand your thread. How did you unlock your device?
What is meant by this:
not your flashing one, but clean bootloader, by hardreset followed by record and reset
thanks
Click to expand...
Click to collapse
That refers to the flashing Tmobile boot screen that shows and stays.. it wouldn't boot any further.
If you press record (left top side of your device, small button above the volume slider) and hold this while pressing reset you will get into the real bootloader mode (a tri-colour screen) that allows you to do a USB connect.
Now go to: http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
and download the following ROM for your T-Mobile device:
T-Mobile English T-MOB005 ARTE***** 1.13.110.1 9/22/06 1.13.110.101 1.13.0000 02.49.90 4.1.13.25 (direct link: ftp://xda:[email protected]/art_tmouk_11311001_024990_wwe_ship.exe)
Just run this exe while in that bootloader (tri-colour) mode.
Good luck, that did it for me.

Not T-mobile
Hi,
Thanks for your reply. But my device is not T-mobile branded. It is a original HTC.
Tried your method but does not work.
Will have to find someone with a dutch rom I think
I am out of ideas

*bump
I have the same problem.. I can get into bootloader screen, but I can't find a T-Mobile ROM to flash.
Anyone with a working link to a T-Mobile ROM? The link was removed from this page..
Thnx

Pyth said:
I have the same problem.. I can get into bootloader screen, but I can't find a T-Mobile ROM to flash.
Click to expand...
Click to collapse
What language was your original T-Mobile in? I presume Dutch since you live in Holland. Unless you had your phone unlocked before you tried to flash it, you can only restore the same ROM. Unfortunately there is no Dutch ROM as far as I know.

So how did you solve it? Thought you had this problem 2 months ago..
And yes the original language was Dutch..
Im contacting T-Mobile right now, and they should have a NL version but the site is down atm.

Pyth said:
So how did you solve it? Thought you had this problem 2 months ago.. And yes the original language was Dutch..
Im contacting T-Mobile right now, and they should have a NL version but the site is down atm.
Click to expand...
Click to collapse
Personally I never tried to flash my phone, maybe you read an answer from me to someone with a similar problem.
T-Mobile can provide you with the correct ROM, but I don't think it can be found at their site. Well, it was not there last time I looked anyway.

grun said:
Personally I never tried to flash my phone, maybe you read an answer from me to someone with a similar problem.
T-Mobile can provide you with the correct ROM, but I don't think it can be found at their site. Well, it was not there last time I looked anyway.
Click to expand...
Click to collapse
Hmm you were right.. it was somebody else.
The ROM should be avaible @ http://www.t-mobile.nl/software but that site isn't working at the moment. They told me that the only thing I could do now, is going to a T-Mobile shop and let them send it for a fix.
So my hopes are on a PM that I send to the author of this post. Perhaps he's able to give me the original ROM.

Pyth said:
So my hopes are on a PM that I send to the author of this post. Perhaps he's able to give me the original ROM.
Click to expand...
Click to collapse
Mmm, I think he was looking for a T-Mobile ROM in the English language, so you cannot use that because it has a different signature. Unless you're phone is unlocked?

nope..
But I can give it try anyway..
Want to use the fixing by T-Mobile as a last resort..

Pyth said:
Want to use the fixing by T-Mobile as a last resort..
Click to expand...
Click to collapse
I just checked their Dutch site and it is up and running again. Hate to disappoint you, but there is no original complete Dutch ROM for download, only an update with a Blackberry Client.
You may find a ROM for a MDA III though, be careful not to use that one because that is a different model, also known as Blue Angel. It has a sliding mechanism and a keyboard for example.

grun said:
I just checked their Dutch site and it is up and running again. Hate to disappoint you, but there is no original complete Dutch ROM for download, only an update with a Blackberry Client.
You may find a ROM for a MDA III though, be careful not to use that one because that is a different model, also known as Blue Angel. It has a sliding mechanism and a keyboard for example.
Click to expand...
Click to collapse
Weird.. I still get an error on this site: http://www.t-mobile.nl/software/

Pyth said:
Weird.. I still get an error on this site: http://www.t-mobile.nl/software/
Click to expand...
Click to collapse
https://www.t-mobile.nl/zakelijk/media/download/BA_TMNL_14200_119_11300_Ship.exe
MDA III Update...
I also have my P3300 f*cked up...

Thnx for the link!
But this doesn't work if your MDA is in bootloader.. this program needs an ActiveSync connection

Hmm...
I'm thinking about sending it to HTC voor repair
I'm going to do one more thing and that's is backup the OS
from a friend that also had a HTC P3300 NL and hope to make
a ROM file...
So let's hope that will work!

But if you made a backup you still need to connect to your MDA while it's in bootloader...
If anyone knows how to do that...

Yep i know... i've tried everything! with mtty.exe and nothing
works.
See below the reaction from IMEI-CHECK:
Hello,
sorry to tell you the BAD NEWS but you REALLY can not fix the phone yourself.
You only have 2 options to get the phone fixed:
1) you find the "ORIGINAL HTC P3300 DUTCH ROM Update" and flash the device from bootloader (most likely not available)
2) you send the phone to repair
Sorry to tell you but there are REALLY REALLY REALLY REALLY REALLY no other options.
The mistake from you was to use the risky ROM update without CID unlocking the phone BEFORE.
Regards,
IMEI-CHECK Team
----- Original Message -----
Hello,
I've a broken HTC P3300 (Dutch). The story is this:
It has no sim-lock but it does have a CID-Lock.
I update my Dutch HTC P3300 to this ROM:
- PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap
and that whent great. Everything worked. After this i saw another ROM and i installed it:
- Tom HTC Artemis Rom v2.00.01 PDAVIET
and the update whent fine, but after hard reset it stops at the HTC Logo with the version numbers.
I only can get to the bootloader and do some thing with hyperterminal (mtty.exe).
When i want to install this ROM:
- HTC_1.12.405.01_026790_WWE_SHIP
it says that i get this error after 2%:
ERROR [244] WRONG MODEL ID
When i use art_tmouk_11311001_024990_wwe_ship.exe it says i have the WRONG VENDER ID.
I have made a backup with aWizard and have these files:
-HTCLogo.nba
-OS.nba
-Radio.nba
-Splash.nba
-boot.rgu
and a folder ExtRom that is empty...
Can you help me with this? I hope so!!
Thanks for your help!
Version numbers:
IPL 1.12.0001
SPL 1.12.0000

herald bricked,seems to be no way out....

using pof herald beta tool,I decompiled c800 .nbh file,and rebuild it into a herald ruu file,successful write into my p4350,but badly,my herald bricked....
only can start with bootloader..
ipl remain: 4.17.0002(herald wm6 ipl)
but spl become: 1.09.0002(c800's spl)
I try to flash original rom that I used before,but it didn't work by ERROR300,and ppc screen stop at 0%. I TRY any ruu I can find,wm5 wm6,but the same ERROR300.
what can I do? is there any way to go?? or I have to change the flasher?
thanks all,plz help

You need to flash original rom matching your CID, this means the SAME language and the SAME operator/carrier ROM that was originally on your device when you bought it. After flashing this rom device will boot again.

pof said:
You need to flash original rom matching your CID, this means the SAME language and the SAME operator/carrier ROM that was originally on your device when you bought it. After flashing this rom device will boot again.
Click to expand...
Click to collapse
thank you.
but I really used the original rom.I used my IMEI and download original rom from the HTC.COM ,but it didn't work and remain the ERROR 300....it wm6 vision.
wm5 vision,I don't know which is my original rom,but I had try three of which I found on wiki. and also not working.

when I bought this,It display IPL 5.04.0002 SPL 5.04.0000 ,which rom can I use to fix???
plz give me one.thanks pof
by the way, which cid am I have now? htc p4350 or dopod c800?????

Where did you buy your phone? What type is it? Is it an actual HTC Herald? if you bought it from a cell carrier, maybe you can log into their site and download it there.

duprade said:
Where did you buy your phone? What type is it? Is it an actual HTC Herald? if you bought it from a cell carrier, maybe you can log into their site and download it there.
Click to expand...
Click to collapse
my phone is actually htc herald,no doubt of this,but I bricked it when I change the SPL IPL.... so the SPL had become wrong.

pof,,,,it really became no way out,I think I should go to the shop,and repair it with a new flasher.
I had tried all the language I can found on wiki and web. none of them can work.
RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe (can use beforetime)
EURORUU_Herald_HTC_NOR_5[1].4.409.2_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_DOPODASIA_WWE_1.7.707.3_02.69.90_Ship_R.exe
ruu_herald_htc_dan_5[1].4.403.2_4.1.13.34_02.79.90_ship.exe
RUU_Herald_HTC_GER_5[1].4.407.1_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_HTC_RUS_1.8.411.3_02.71.90_Ship.exe
RUU_Herald_HTC_RUS_5.4.411.2_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_HTC_SPA_5[1].4.412.1_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe
HTC_P4350_ITA_4[1].17.408.2_4.1.13.44_02.94.90_Ship.exe
HTC_P4350_WWE_4[1].17.405.2_4.1.13.44_02.94.90_Ship.exe(can use beforetime)
so sad..

bring your device to a friends house, use his computer and try to flash the RUU, maybe its your computer that has a bug?
have you the correct drivers installed for usb connection?

itje said:
bring your device to a friends house, use his computer and try to flash the RUU, maybe its your computer that has a bug?
have you the correct drivers installed for usb connection?
Click to expand...
Click to collapse
thank you all the same,but I don't have any problem with what you said.

okay thats good
crappy stuff, bricking

itje said:
okay thats good
crappy stuff, bricking
Click to expand...
Click to collapse
yes,thanks.
I would like to know if I change the flasher,can I make the trouble shoot?

didn't think it was possible to brick a herald. def gonna b more carefull now

yangchao8115 said:
thank you.
but I really used the original rom.I used my IMEI and download original rom from the HTC.COM ,but it didn't work and remain the ERROR 300....it wm6 vision.
wm5 vision,I don't know which is my original rom,but I had try three of which I found on wiki. and also not working.
Click to expand...
Click to collapse
me too and tried many rom but fail erro 300 0% stop IPL AND SPL 1.08.001 . it was died and waiting for new unbrick way

wooo...cost me 400rmb to make it repaired,changed a flasher and I now the make my herald superCID . after repaired I used the SDcard to flash the wm6ruu (using the file named heraimg.nbh on sdcard) .whatever it's ok now thanks everyone

Looking for dutch T-mobile rom

Can anyone help me with this?
I f*cked up my 6.0 update...
Cant find it anywhere on the net...

... So I need the original t-mobile wm 5.0 rom... PLEASE HELP ME!

Farian303 said:
... So I need the original t-mobile wm 5.0 rom... PLEASE HELP ME!
Click to expand...
Click to collapse
there is no wm5 NL version, if you search here there are hundreds of people after the same ROM, no rom here or on the internet.
you can find wm5 EN version and you can search this forum for it.

the phone doesn't start up anymore, only the t-mobile screen will load, the menu won't..... Any suggestions? Its Cid Locked, No original rom....

Farian303 said:
the phone doesn't start up anymore, only the t-mobile screen will load, the menu won't..... Any suggestions? Its Cid Locked, No original rom....
Click to expand...
Click to collapse
First try to hard reset the device (search your manual how that works). If that doesn't work:
Try USPL and a different (WM6) rom a few times. Maybe search for a way to enter the boot loader, that's where/when USPL is executed. If you can enter that, USPL should be able to run I guess.

bricked artemis
Can anyone help me with this?
I f*cked up my 6.0 update...
Cant find it anywhere on the net...
hi Farian 303
i also once bricked my mda compact3.
you probably forgot to use uspl (super cid unlocking) b4 installing your stuff (another rom etc) on it.
The only way is to send it to the company where u bought your telephone. If u have guaranty, then they will restore it for free for you.otherwise unless if u dont have guaranty, then go to erlan.nl and that guy will do it for you for 30 euro.
success

i have a duch wm5 rom but on my divice.... how can i make it to a rominstaller?

neorotic said:
i have a duch wm5 rom but on my divice.... how can i make it to a rominstaller?
Click to expand...
Click to collapse
You can't.
Have you already tried to run USPL again and then flash an other rom on your device????

ofcource... if got 2 divice's
one standaard with wm5 dutch
and one with B&B 4.3

Is this gonna work to unbrick my device? Because i don't know how to USPL from the bootloader?

ok.do it in your ways.

ok.do it in your ways.I don't need to do so many things and to be a thief even I don't own a herald.
happy now?

The O2 XDA Terra has got
SPL 4.11.0000
... and the Hard-SPL is NOT working!!
Sorry.

my herald p4350 got
spl 4.17.0000
and its not working for me either
I tried downgrade to wm5 then run the hard-spl, got as far as getting the "whitescreen" didnt get that with wm6 installed
But spl stayed same after.
sorry
cheers

papamopps said:
The O2 XDA Terra has got
SPL 4.11.0000
... and the Hard-SPL is NOT working!!
Sorry.
Click to expand...
Click to collapse
itje said:
my herald p4350 got
spl 4.17.0000
and its not working for me either
I tried downgrade to wm5 then run the hard-spl, got as far as getting the "whitescreen" didnt get that with wm6 installed
But spl stayed same after.
sorry
cheers
Click to expand...
Click to collapse
NO,it work,I am not using the one in his post.
Is the older one v4.20 for testing. what he released is v4.60
OLIpro start testing the hard spl with me,form v4.1 to v4.5 till my herald bricked he test with another guy and released the v4.6.I notice that oli maybe forgot to double up the nb file,it should be 1024large,and the nbh file should 1025 kb

canonyang_China said:
NO,it work,I am not using the one in his post.
Is the older one v4.20 for testing. what he released is v4.60
OLIpro start testing the hard spl with me,form v4.1 to v4.5 till my herald bricked he test with another guy and released the v4.6.I notice that oli maybe forgot to double up the nb file,it should be 1024large,and the nbh file should 1025 kb
Click to expand...
Click to collapse
a
when will it be available then?

itje said:
a
when will it be available then?
Click to expand...
Click to collapse
I don't know.you should ask olipro.
IF you are T-WING or VADEFONE or HTC 4350 no need to unlock.just use JumpSPL by pof to flash your SPLASH EXTROM OS,but don't do anything else.
JUMPSPL,jump into 0x10000000,then flash with ROMUpdateUtility.exe to flash NBH file.
NBH file can make youself by using HTCRT.exe.
SPLASH file can make youself by using SplashScreen.exe
EXTROM you can edit it with winimage.
cheer.

canonyang_China, you seem to be a smart cat with the XDA's. Heres my problem
I flashed my German XDA Terra (Herald) from TOuchIt 1.1 to 2.0 and doing so I briked my device.
I tried the HArd SPL, nothing worked.
Whenever i want to Flash, I get into bootloader mode, then at 2% the device restarts and I get INvalid Vendor ID or when I try the Hard SPL I get "Corrupted Image"
What can I do to unbrick my device since there is no RUU for the XDA terra WM6
Please help !!!!!

Help Link Doesnt Work
The Link You Posted, I Try To Open It But It Doesnt Work.
Please I Need Your Help.
Can You Please Give Me An Other Link
Thanks

thanks!!!!great work!i think very much people want to use it ~~~~~~~~~`

lxa786 said:
The Link You Posted, I Try To Open It But It Doesnt Work.
Please I Need Your Help.
Can You Please Give Me An Other Link
Thanks
Click to expand...
Click to collapse
use proxy http://www.ok-proxy.com/ enter the link into it.
canonyang_China, you seem to be a smart cat with the XDA's. Heres my problem
I flashed my German XDA Terra (Herald) from TOuchIt 1.1 to 2.0 and doing so I briked my device.
I tried the HArd SPL, nothing worked.
Whenever i want to Flash, I get into bootloader mode, then at 2% the device restarts and I get INvalid Vendor ID or when I try the Hard SPL I get "Corrupted Image"
What can I do to unbrick my device since there is no RUU for the XDA terra WM6
Please help !!!!!
Click to expand...
Click to collapse
I am sorry,as I said in the post.I don't know how to unbrick,especially like O2,c800,c858.as they have no ruu.

Hi
I wud request if u can read my opinion on lower bootloader in the Hard SPL thread.I hv been trying and trying, but failing,untill POF released Jump SPL.
Just as an information, lower bootloader Heralds shd b upgraded to higher bootloader first using Jump SPL.
Pls do not flash a part of ROM...viz only OS or only radio..pls flash the complete ROM and yr herald will boot with the new OS and higher bootloader.
Then one can use aserg techniques to flash OS.nb..If one flashes OS.nb in lower bootoader, one will get Radio Error.So it is important to get higher bootloader first.
With Jump SPL, also, pls do not try to flash any part of ROM, just flash a full NBH, else it will not boot yr Herald.
Hv tried above with 10 heralds(Dopod C800 with BL 1.09)
I hope this helps
canonyang_China said:
Dear OLIPRO:​
Click to expand...
Click to collapse

hdubli said:
Hi
I wud request if u can read my opinion on lower bootloader in the Hard SPL thread.I hv been trying and trying, but failing,untill POF released Jump SPL.
Just as an information, lower bootloader Heralds shd b upgraded to higher bootloader first using Jump SPL.
Pls do not flash a part of ROM...viz only OS or only radio..pls flash the complete ROM and yr herald will boot with the new OS and higher bootloader.
Then one can use aserg techniques to flash OS.nb..If one flashes OS.nb in lower bootoader, one will get Radio Error.So it is important to get higher bootloader first.
With Jump SPL, also, pls do not try to flash any part of ROM, just flash a full NBH, else it will not boot yr Herald.
Hv tried above with 10 heralds(Dopod C800 with BL 1.09)
I hope this helps
canonyang_China said:
Dear OLIPRO:​
Click to expand...
Click to collapse
MAYBE that a way.I know that the spl ipl must be suit for the radio or it will not boot,will gone black screen.
I do want to confirm something.
first,you mean flash high SPL IPL like WM6 one totally NBH via Jumpspl?
second,Jumpspl to flash,if you succeed.the device will boot normally?
third,after you flash,which cid do you have?(check in MTTY or try to flash the ruu which you get the NBH)
fourth,if I want to try,maybe I would like to make a nbh with hard-spl to flash.after all,it cid unlock,and we can do something more if it failed.
cheer​
Click to expand...
Click to collapse

papamopps said:
The O2 XDA Terra has got
SPL 4.11.0000
... and the Hard-SPL is NOT working!!
Sorry.
Click to expand...
Click to collapse
My device is same to your!(O2 terra)It was bricked!But it can work now after changed the flasher!AND canonyang make me Hard-spl,now I am using WM6.

yangyqh said:
My device is same to your!(O2 terra)It was bricked!But it can work now after changed the flasher!AND canonyang make me Hard-spl,now I am using WM6.
Click to expand...
Click to collapse
Hey, I have a bricked Terra too, is there any way I can fix it? I get into Bootloader, I had WM6 before, Updated to TouchIt 1.1 then when I tried to Update to TouchIt 2.0 It bricked.
Any ideas?
When I leave it load it will not go past the O2 Bubble screen.
When I try to update it only goes to 2% and then I get invalid vendor ID.
Please advise Me!!
Thank you!!

canonyang_China said:
use proxy http://www.ok-proxy.com/ enter the link into it.
I am sorry,as I said in the post.I don't know how to unbrick,especially like O2,c800,c858.as they have no ruu.
Click to expand...
Click to collapse
I need help on htc P4350 it don;t power up only goes to boot-loader
ipl 1.08.00001
spl 1.08.00001
i need help to unbrick that if you help me i am thankfull to you i flashed all roms but stops saying invalid update tool.
please help me

zubi1984 said:
I need help on htc P4350 it don;t power up only goes to boot-loader
ipl 1.08.00001
spl 1.08.00001
i need help to unbrick that if you help me i am thankfull to you i flashed all roms but stops saying invalid update tool.
please help me
Click to expand...
Click to collapse
If you are htc p4350,don't worry about anything.follow my steps:
1,Take off your battery to get you SN.
2,GO TO www.htc.com
3,Mouse action to E-CLUB icon.
4,Join is member with your SN,then login on.
5,You will see "Phone Software Updates" follow it and you will get a Offical RUU cid suit your device.
6,After downloaded,RUN the RUU and your device will back to life.your IPL SPL will change into 4.17.your os will be wm6.
7,if you can't find anything in "Phone Software Updates".please try all the WM6 RUU for HTCP4350 in the first post to find one suit for you cid.try the WWE one first.
cheer

exxi said:
Hey, I have a bricked Terra too, is there any way I can fix it? I get into Bootloader, I had WM6 before, Updated to TouchIt 1.1 then when I tried to Update to TouchIt 2.0 It bricked.
Any ideas?
When I leave it load it will not go past the O2 Bubble screen.
When I try to update it only goes to 2% and then I get invalid vendor ID.
Please advise Me!!
Thank you!!
Click to expand...
Click to collapse
I think you must first change ROM
Want to upgrade Hard SPL must be able to enter the system！

Tell the people around you：Taiwan is a province of China！！！
cheer for you

yangyqh said:
I think you must first change ROM
Want to upgrade Hard SPL must be able to enter the system！
Click to expand...
Click to collapse
Yes, right now, there is no RUU for the terra, so he has to send it to O2 for repair.

edzilla said:
Yes, right now, there is no RUU for the terra, so he has to send it to O2 for repair.
Click to expand...
Click to collapse
yep,you are right

Help with restore ROM

Hi, i try update ROM with WM 6, update go to 99% but on the end return error. When now i turn on Cingular 8125 i see onli red, green and blue screnn with IPL: 2.25.0001, spl 2.25.0001.
Pleas can you tel me how i can restore rom and my mobile go.
Have somebody ROM 2.25. for this mobile?
THX!

Flash back to the carrier ROM that came with the device and then try this new ROM.

Help
But how i can flash back to the carrier ROM? Im novice. THX
kareem9nba said:
Flash back to the carrier ROM that came with the device and then try this new ROM.
Click to expand...
Click to collapse

Forgot to ask this first, have you cid unlocked your device?

Hey I have a Cinguler 8125 IPL/SPL 1.08 and it stop at 99%, did the recovery , but still stop at 99% can someone have me.

my dear friend - read the stickies at the top of Wizard Upgrading forum. just read, and understand every word before you flash.
you're problem seems to be simple - you don't have SuperCID or your Carrier ID is still locked, therefore it won't update.
Go through the process, download the WST4.2 download all the programs required.
That, or you can flash the original ROM supplied by your manufacturer