Hi, i try update ROM with WM 6, update go to 99% but on the end return error. When now i turn on Cingular 8125 i see onli red, green and blue screnn with IPL: 2.25.0001, spl 2.25.0001.
Pleas can you tel me how i can restore rom and my mobile go.
Have somebody ROM 2.25. for this mobile?
THX!
Flash back to the carrier ROM that came with the device and then try this new ROM.
Help
But how i can flash back to the carrier ROM? Im novice. THX
kareem9nba said:
Flash back to the carrier ROM that came with the device and then try this new ROM.
Click to expand...
Click to collapse
Forgot to ask this first, have you cid unlocked your device?
Hey I have a Cinguler 8125 IPL/SPL 1.08 and it stop at 99%, did the recovery , but still stop at 99% can someone have me.
my dear friend - read the stickies at the top of Wizard Upgrading forum. just read, and understand every word before you flash.
you're problem seems to be simple - you don't have SuperCID or your Carrier ID is still locked, therefore it won't update.
Go through the process, download the WST4.2 download all the programs required.
That, or you can flash the original ROM supplied by your manufacturer
Related
Hi there, I got my O2 xda orbit 2 weeks ago from germany and I decided to change the german rom to an wwe one, but the phone got bricked and stays on the welcome screen
I think I did a CID unlock but I am not sure. I can get to bootloader but I don't know what to do. How can I put a WWE WM6 on my Orbit? and also how can I check if my battery is above 50%?
Thank you
flash device with original O2 ROM.
regards,
Ok, but the only original O2 roms that I found in this forum are WM5, the original WM on my Orbit was WM6
Have you tried using the original O2DE WM5 ROM, although I am fairly sure that O2DE were one of the first to release a WM6 ROM.
EDIT: Yes, here it is: ftp://htc_us:[email protected]_O2_DE_3.4.207.2_4.1.13.41_02.88.90_Ship.exe
So when I flash the original O2 rom, can I upgrade to an english WM6 and how?
Follow the instructions on the UPSL thread to CID unlock your device. NOTE: Best to use an XP computer, Vista will not work right.
Then immediatly flash the ROM of your choice.
I think my CID is unlocked. I followed the instructions that were in the forum and the spl changed to 1.11.0000. Which ROM file should I put on my device? thx
n1k1 said:
I think my CID is unlocked. I followed the instructions that were in the forum and the spl changed to 1.11.0000. Which ROM file should I put on my device? thx
Click to expand...
Click to collapse
Go for B&B3.7. Stay clear of the O2 Official ROM. It's crap!!!
O2 WM6 rom
use the O2 wm6 upgrade nothing wrong with it really go to their site and download . If you have a UK O2 orbit you will not need to CID unlock it will go on with no problem
Shand359 said:
Go for B&B3.7. Stay clear of the O2 Official ROM. It's crap!!!
Click to expand...
Click to collapse
You don't like it then that is fine, but crap? No. It is wholly stable and works absolutely perfectly.
Shand359 said:
Don't have anything new to add that hasn't been said already.........except that i don't like it. Been using B&B3.7 until last night. O2 WM6 seems like a step backwards from this ROM, not sure why
http://forum.xda-developers.com/showpost.php?p=1410662&postcount=8
Click to expand...
Click to collapse
Yes it is stable, yes it works perfectly.
I still don't like it.
B&B3.7 is very stable. It also works perfectly. plus it also works a damn site faster too.
I am entitled to my own opinion, you are to yours.
n1k1
did you recover device?
you can flash any ROM with USPL installed, read USPL manual.
regards,
Thanks to everybody for their comments, but active sync does not work on my pc when the phone is bricked and stays on the welcome screen so I can't install the uspl... Also when I am able to fix this problem, which rom would you recommend me to upload on my device?
n1k1
1. you need to flash your device with original ROM it was shipped with.
flashing is done from bootloader. activesync will be unavailable, don't bother. just start flasher and follow the wizard.
2. when device is flashed and operational, install uspl.
documentation is supplied with uspl.
3. since then, you can flash any ROM you like.
regards,
n1k1 said:
Thanks to everybody for their comments, but active sync does not work on my pc when the phone is bricked and stays on the welcome screen so I can't install the uspl... Also when I am able to fix this problem, which rom would you recommend me to upload on my device?
Click to expand...
Click to collapse
Hold TOP LEFT button and press in RESET and get device into bootloader. Can't do anything from welcome screen. Then flash the devices original ROM. After this flash USPL and the B&Bv4 as this is the best available...........as of yet anyway.
Hi
I followed uspl instructions. But after stage 1 (White screen) active sync will not connect. Phone connected to charger, still on White screen.
If advice above about bootloader is correct, could someone re-explain with simple steps.
Thanks colink
Can anyone help me with this?
I f*cked up my 6.0 update...
Cant find it anywhere on the net...
... So I need the original t-mobile wm 5.0 rom... PLEASE HELP ME!
Farian303 said:
... So I need the original t-mobile wm 5.0 rom... PLEASE HELP ME!
Click to expand...
Click to collapse
there is no wm5 NL version, if you search here there are hundreds of people after the same ROM, no rom here or on the internet.
you can find wm5 EN version and you can search this forum for it.
the phone doesn't start up anymore, only the t-mobile screen will load, the menu won't..... Any suggestions? Its Cid Locked, No original rom....
Farian303 said:
the phone doesn't start up anymore, only the t-mobile screen will load, the menu won't..... Any suggestions? Its Cid Locked, No original rom....
Click to expand...
Click to collapse
First try to hard reset the device (search your manual how that works). If that doesn't work:
Try USPL and a different (WM6) rom a few times. Maybe search for a way to enter the boot loader, that's where/when USPL is executed. If you can enter that, USPL should be able to run I guess.
bricked artemis
Can anyone help me with this?
I f*cked up my 6.0 update...
Cant find it anywhere on the net...
hi Farian 303
i also once bricked my mda compact3.
you probably forgot to use uspl (super cid unlocking) b4 installing your stuff (another rom etc) on it.
The only way is to send it to the company where u bought your telephone. If u have guaranty, then they will restore it for free for you.otherwise unless if u dont have guaranty, then go to erlan.nl and that guy will do it for you for 30 euro.
success
i have a duch wm5 rom but on my divice.... how can i make it to a rominstaller?
neorotic said:
i have a duch wm5 rom but on my divice.... how can i make it to a rominstaller?
Click to expand...
Click to collapse
You can't.
Have you already tried to run USPL again and then flash an other rom on your device????
ofcource... if got 2 divice's
one standaard with wm5 dutch
and one with B&B 4.3
Is this gonna work to unbrick my device? Because i don't know how to USPL from the bootloader?
I have G3, My battery was over in the middle of an hard-reset...
Then my wizard is always stuck on the IPL/SPL screen and when i try to hard reset i get error "format is failed".
I tried to flash button rom and also Xda_MiniS_LaunchROM_v154102 but still the wizard stuck on splash screen (with the picture) but the OS doesn't start...
When i was trying to flash wizard love rom i got error 300 something like invalido, so i replaced the nk.nbf of the button rom with the one of the wizard love rom and then it succeed. but heaven with the wizard love it's still stuck on the splash screen... i have no idea what is the operator of the device because i bought it from someone (second-hand) and there is not any sign of the operator on it... so i can't flash the original rom...
With the wizard love rom it desplay the following at the splash screen (with the image):
IPL 1.05
SPL 2.16
GSM 02.25.11
OS 2.26.10.2
I return and say that when i try to hard-reset i get error "format is failed"..
I can get to the bootloader so i don't think that my wizard is bricked..
Sorry about the bad english...
I will be grateful for any idea, PLEASE help me
Try the Wizard > WM6 thread. You'll get more info there than here regarding flashing....
gilnis2
what's the make/model of your phone,is it T-mobile Mda,At&TT cingular 8125,Qtek 9100, or O2 xda minis S.You can find all the official stock Roms here in this link,download the specific official Rom of your phones make and flash in the bootloaders mode.If you are using any Sdcard or miniSd card,remove it before flashing and get the battery fully charged with wall charger before starting to flash.
http://forum.xda-developers.com/showthread.php?t=342744
Cheers!
I don't know what is my device opertator because i bought it from second-hand...
Maybe should i try flashing all of these rom until that it will work? i have G3 and i saw that these rom are for G4, Is that OK?
gilnis2 said:
I don't know what is my device opertator because i bought it from second-hand...
Maybe should i try flashing all of these rom until that it will work? i have G3 and i saw that these rom are for G4, Is that OK?
Click to expand...
Click to collapse
Probably, but not definitely. Most will have something in their respective threads to tell you if they were tested on G3 or not. It's good to be alert about this, though, because if you are successful in flashing to the wrong ROM, you could end up with an expensive brick.
gilnis2 said:
I don't know what is my device opertator because i bought it from second-hand...
Maybe should i try flashing all of these rom until that it will work? i have G3 and i saw that these rom are for G4, Is that OK?
Click to expand...
Click to collapse
all official stock roms are basically for both G3 and G4 devices,they are safe for both,they include IPL/SPL for both the devices,while flashing an official rom,it will determine the version and will only flash those ipl/spl which are suitable for that version,so its safe to flash official rom to either a G3 or G4 phone.
cheers!
I having problem to flash these roms..
I don't know my device original operator at all...
Maybe should i try the Mini SD backup solution from here:
http://forum.xda-developers.com/showthread.php?t=276963
??
Thanks on advance..!
hi all, Gratz for great forum.
I received from friend of mine a brick called HTC - on back is label ARTE100.
it is freeze on bootscreen, that is good for now.
BUT i have information that it is comming from Netherlands, and was locked before.
Someone else is bricked upgrading it without CID unlock beforehand.
I have tried almost all available original ROMs, well some of them missed.
My question is is there any way to check by IMEI , which carrier was before?
And is there any available factory ROM from this carrier.
There is no sign or any label on it.
freezing screen is:
IPL 3.04.0001
SPL 3.04.0001
GSM 02.93.90
OS 3.4.0.0
Thank You Very much for any answer .
Stopper said:
hi all, Gratz for great forum.
I received from friend of mine a brick called HTC - on back is label ARTE100.
it is freeze on bootscreen, that is good for now.
BUT i have information that it is comming from Netherlands, and was locked before.
Someone else is bricked upgrading it without CID unlock beforehand.
I have tried almost all available original ROMs, well some of them missed.
My question is is there any way to check by IMEI , which carrier was before?
And is there any available factory ROM from this carrier.
There is no sign or any label on it.
freezing screen is:
IPL 3.04.0001
SPL 3.04.0001
GSM 02.93.90
OS 3.4.0.0
Thank You Very much for any answer .
Click to expand...
Click to collapse
imei is usually under the battery
and for availiable shipped rom versions click my signature,go to artenis section and under "upgrading" choose availiable shipped rom versions(or click here),also if you want you can try this before flashing the rom...the instructions are there too,just download the mtty and follow the steps from the link
Stopper said:
[...]
I have tried almost all available original ROMs, well some of them missed.
My question is is there any way to check by IMEI , which carrier was before?
[...]
Click to expand...
Click to collapse
I guys, I'm trying to repair my ARTEMIS that I bricked but I don't know which was the original rom because I have flashed with WM6 original rom the day after I bought it.
As asked by Stopper there is a way to know which was original rom so I could try to restore it by SD card?
thank you so much
bye
There's no way through the device (no device flash history), however it's usually the stock carrier ROM so try flashing to that.
kareem9nba said:
There's no way through the device (no device flash history), however it's usually the stock carrier ROM so try flashing to that.
Click to expand...
Click to collapse
The answers are confusing, I have one Mda Tmobile (Artemis) with exactly the same problem. It had german rom originally, and I tied Uspl and had error at the end, maybe the version was lower cause i did not check. Since I could not be able solve it. when you try wwe rom it says invalid vendor Id, any other rom give ivalid model id error.
Is there any solution available for this?
Thanks
Kenny
keke1 said:
The answers are confusing, I have one Mda Tmobile (Artemis) with exactly the same problem. It had german rom originally, and I tied Uspl and had error at the end, maybe the version was lower cause i did not check. Since I could not be able solve it. when you try wwe rom it says invalid vendor Id, any other rom give ivalid model id error.
Is there any solution available for this?
Thanks
Kenny
Click to expand...
Click to collapse
run the official exe
find it's content in users application data (in documents and settings)
copy to somewhere else
delete the spl.nbh and run the ruu
it worked with herald which was danish and now is wwe
haven't tried it on artemis,because it was wwe,but it should work
Hello anyone,
i just have done some bull****, i guess...
yesterday evening i copyed "EnterBootloader.exe" via USB to my VPA compact 4 & run it from over there. meanwhile this step i was connected to USB (maybe the fault [?])! the SIM-card was inside the device, but no SD-Card.
next a whitescreen popped up and i waited 1.5min... i couldn't wait any longer, so i pressed on-/off-button...
nothing happened if i press the on-/off-button again, nothing happens! no LED is blinking any longer, even i connect it to 230V.
my situatin is really uncomfortable to me - please help me to get back the manufacturers settings!
thx in advise
Beli
why did you copy "EnterBootloader.exe" to your device and run it? What where you trying to do?
my thought was to find out, which SPL my device is...
so far for now i'm in the bootloader screen (RGB-colors) & able to connect to USB...
i guess i need a original RUU & ROM for Vodafone GER. if i'm wrong please correct and show me howto install any other ROM via any RUU...
my bootloader offers me this:
IPL: 1.09.0001
SPL: 1.09.0001
greetz
Beli
Belisario said:
my thought was to find out, which SPL my device is...
so far for now i'm in the bootloader screen (RGB-colors) & able to connect to USB...
i guess i need a original RUU & ROM for Vodafone GER. if i'm wrong please correct and show me howto install any other ROM via any RUU...
my bootloader offers me this:
IPL: 1.09.0001
SPL: 1.09.0001
greetz
Beli
Click to expand...
Click to collapse
You can NOT flash custom ROM's. Your SPL is too low. Try flashign the official ROM for your providor.
ace10134 said:
You can NOT flash custom ROM's. Your SPL is too low. Try flashign the official ROM for your providor.
Click to expand...
Click to collapse
It was not my intention to flash any ROM...
Thanks for the advice, but for now i'm unable to flash any provider ROM, because i don't have any!
...i guess it should be a GERMAN vodafone ROM, because that was the last runnig stable.
now a few questions, which the WIKI was unable to answer:
where to get this unknown ROM?
over here?
how to install (guide/tut would be nice...)?
what about the two different "goldcard"-methods?
Elf-Goldcard
Herald-Goldcard
what about the so-called "Unbricker"?
over here
thewingster.com is the best place. check it out
Brandonii said:
thewingster.com is the best place. check it out
Click to expand...
Click to collapse
Well it's not going to solve his problem.
I wish my website could fix his phone in an instant, but it can't He'll have to do the Goldcard, most likely
So, if the Goldcard is the best solution for my Herald, i have to try it... otherwise there is no way out.
BUT:
The website "hides" a link to the official ROM of T-Mobile Wing (US).
I've modified the link, but i don't know if i'm at the right place over HERE.
Maybe i should try it, but they need the so-called IMEI... i don't want to offer it to them, only if it would solve my problem!
As far as i know, i need to download the official ROM of Vodafone Germany with SPL-version 1.09.
If any of you has this ROM or something that could help my to find it, please post a "hint" for me where to get
Thanks in advance
Beli