Dear experts,
since a long time now I'm reading this forum and got many fantastic tipps, ROMs, etc. Unfortunately since yesterday my HTC Touch Cruise's (P3650) touchscreen doesn't react any more. Even hard reset, trying several ROMs (til yesterday I used M-Anime for more than 6 month without any problems), nothing could solve this problem
Therefore I need to send back the HTC to my distributor. However I've to restore original ROM & SPL. Before updating to M-Anime I made a copy of my ROM as suggested, but unfortunately in the meantime all my PC data were lost. So no ROM and even more no SPL. My last hope is this great forum!
To go back to original status I need IMHO following things:
If possible a short description of necessary steps
Original WM 6.0 GERMAN ROM (Version: Bought my HTC in March 2008 / Orginal HTC - no branding)
Original SPL (have installed Hard-SPL at the moment)
Everything what I forgot so far
Many thanks for your help & support in advance,
cheers
ToBe76
PS. I tried to read all threads regarding original rom, but either it's not the correct version or the download link is down ...
hi
direkt von HTC > WM 6.1
oder http://rapidshare.com/files/1499142....0_radio_sign_25.85.30.07_1.59.42.15_Ship.exe
reko
Hey Reko,
thanks for your prompt answer. Thought that this upgrade needs original WM 6.0 ROM ... nevertheless installation worked and I've the original HTC WM 6.1 installed now. In this regard one question, just to clarify. The HTC WM 6.1 is an official release and therfore guarantee keeps untouched, right?
And second thing, now I've to restore the original SPL, I tried to check all relevant threads, but I'm still not sure what to do and where to get it. Could anyone help?
Again many thanks for your support,
cheers
ToBe76
1. flash the spl-restore and verify manually in bootloader if the SPL 1.25.xx got flashed
2. flash again the wm6.1 because it has newer SPL than the SPL-restored
if that fails..
1. flash wm6.0 rom + radiorom
2. flash spl-restore
3. keep it as is, or update wm6.1
Hi c3ro,
thanks for your support. Will try do follow your steps and in case of further problems get back.
Thx & cheers
ToBe76
Related
I have found no working link for RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship including link given at WIKI. I have googled for above ROM but still no working link.
I need above ROM as i need to go back on official WM5 ROM of mine (from WM6) before installing TOUCH IT. Any help???
Not exactly what you requested but close enough
HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe (official WM6 ROM)
shahkh said:
I need above ROM as i need to go back on official WM5 ROM of mine (from WM6) before installing TOUCH IT. Any help???
Click to expand...
Click to collapse
I'm sure you don't have to downgrade.
I didn't do that and nobody else I know
GAMBIT999 said:
Not exactly what you requested but close enough
HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe (official WM6 ROM)
I'm sure you don't have to downgrade.
I didn't do that and nobody else I know
Click to expand...
Click to collapse
I am already using your mentioned ROM. I have tried HARD SPL and WM6_Hard_SPL.rar. I have also tried BETA3 USPL. I recieve connectivity errors though I am able to run same WM6 RUU (Ship version) successfully. In WIKI its mentioned among known problems that
UPGRADING TO WM6 FROM WM6
(PLEASE DELETE LINE IF CONFIRMED)
Not sure if this is a known\common issue but when you are upgrading from a cooked WM6 ROM to another cooked WM6 ROM you must first downgrade to WM5 otherwise you will get hung at the first boot loader screen
Weird, if your SPL is at least 4.xx.xx the HardSPL ROM should work fine with you. I flashed from original German O2 WM6 ROM to HardSPL WM6 ROM. Then I flashed to latest HTC German WM6 ROM (for a clean base) and from there to any available custom ROM.
Thats what i am unable to understand. It gives me connection error 202 on PC as soon as it goes to BOOT loader. I have seen a few other users making same complaint in HARD SPL thread of olpiro.
I have connection problems too, and they were fixed by uninstalling activesync, then redownloading it from the MS website.
http://www.microsoft.com/windowsmobile/activesync/default.mspx
Resolved
Thanks Issue has been Resolved via USPL and TOUCH IT.
shahkh said:
I have found no working link for RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship including link given at WIKI. I have googled for above ROM but still no working link.
I need above ROM as i need to go back on official WM5 ROM of mine (from WM6) before installing TOUCH IT. Any help???
Click to expand...
Click to collapse
Here is a working link
http://rapidshare.com/files/27470732/RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe
Regards
i found a eaiser way and u dont need a uspl all u need to do is get the stock ruu and run it. your phone is going to restart...simply put it back into bootloader mode without taking off the usb and your done!!!!!
shafez said:
Here is a working link
http://rapidshare.com/files/27470732/RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe
Regards
Click to expand...
Click to collapse
Thanks man ! have a good day !
this is not good rom!
Hello there!
First of all, please excuse my terrible english ... but I hope you can help me!
I unlocked my Athena reffering to this link ...
http://forum.xda-developers.com/showthread.php?t=315831
... and everything went well!
I installed this rom ...
http://forum.xda-developers.com/showthread.php?t=346221
.. and everthing was really awesome !
Then I noticed that the keyboard layout was qwerty .. and as I am a german I´d like to have qwertz ans so I installed this ROM:
http://forum.xda-developers.com/showthread.php?t=399938
Unfortunatedly I´ve chosen the wrong one (strange order of links) because after installing the rom The Device comes up with the warning descriped in the post ... and what´s worst and actually my Problem:
The device resets each time during the "customization", reboots and tries to do the custom again.
It resets even when I try to install another rom ... no tricolor screen or anything!
So the device is now running an unusable OS and I don´t know how to install a new one!
HELP ... I need somebody!
... solved!
found a solution here:
http://wiki.xda-developers.com/inde...e Athena Unlocker - the Black Screen of Death
.. or at least how to install a new rom!
http://forum.xda-developers.com/showthread.php?t=397518
you can find the links to the ATHENA ROM.
Other German ATHENA users could provide some help to set the Kb
Carefully chose the SPL version, 1.2 since you install AP4, after AP4 you will have the newly partitioned ATHENA, with SPL 3.5 (no way to flash any original HTC ROM or an 1.2 SPL ROM, a tool to revert it back is in developing stage)
Hi guys,
thank you a lot for this fantastic websit. Sorry for my English - I am Czech. I hope, that you will understand me. In past I had a HTC vox, but few weeks ago I´ve bought a CRUISE. Everything was Ok, but I wanted to made a upgrade from WM 6,0 to 6,1. I corectly unlocked my cruise and I tried to upgrade to new (unoficial ROM).
I tried this:
http://forum.xda-developers.com/showthread.php?t=478029
and this one:
http://forum.xda-developers.com/showthread.php?t=425612
Upgrading was ok, but after upgrading I have no signal on my PHONE ???
My next step was: I made a upgrade to oficial HTC WM 6,1 from HTC website.
With original WM 6,1 is everything Ok, but I would like to have beter ROM, than original HTC.
At all treads here, you are writing about RADIO? What is it? Is it a driver, which is included in every ROMs and this driver is for PHONE RADIO control?
Is it possible to upgrade only "RADIO" ??? I dont understand a lot this section. When I was upgrading my VOX, there were no problem with this. Every drivers was included in ROM - notning problem.
Thanks for your comment
Pavel alias Lumpo
http://forum.xda-developers.com/showthread.php?t=381600
Thank you so much - I'll read your tread.
I have a brand new XDA orbit 2, which is offered with a warranty by the supplier.
I put the O2 official WM6.1 upgrade on it (RUU_Polaris_O2_UK_3.13.206.0_radio_sign_25.85.30.07_1.59.42.15_Ship.exe) which flashed fine.
I intend to try one or more of the many great sounding WM 6.5 rom images, however, I have a few questions, mainly related to SPL/HardSPL, which although I have done a bit of searching for, have not found definitive answers for ...
Are there any differences between POLA100 and POLA200 devices (will HardSPL work fine on my XDA Orbit 2 / POLA200).
How can I restore the original SPL on the device?
Can I extract the original SPL from a) the device, b) the ROM image, c) source elsewhere?
With HardSPL installed can I reinstall the official upgrade rom with HardSPL still in place (in case of stability problems, with rom images).
Also - anything else I should be thinking about before flashing this device (note I am going deactivate copilot before flashing)?
Apologies if I missed the answers in other posts!
TIA
cix said:
Are there any differences between POLA100 and POLA200 devices (will HardSPL work fine on my XDA Orbit 2 / POLA200).
How can I restore the original SPL on the device?
Can I extract the original SPL from a) the device, b) the ROM image, c) source elsewhere?
With HardSPL installed can I reinstall the official upgrade rom with HardSPL still in place (in case of stability problems, with rom images).
TIA
Click to expand...
Click to collapse
1. yes...main difference is touch cruise...polaris 100...o2 oribit 2 polaris 200
2.yes you can...flash original spl
3. don´t think so
4. now problem...but after you flashed original rom
so try:
look on my rom thread under steps: there is all you need
http://forum.xda-developers.com/showthread.php?t=593750
but all the other rom´s here are also great: eg: pcarvalho´s...kosta´s...salvy.c.83´s and FW-eXXon´s rom´s
big thanks to all of them
edit: i saw this will HardSPL work fine on my XDA Orbit 2 / POLA200).
Are you german or...??? it´s not so important but if you are german look here for a german rom:
http://forum.xda-developers.com/showthread.php?t=605070
Have fun
Thanks for the reply... Sorry to be slow, but...
>1. yes...main difference is touch cruise...polaris 100...o2 oribit 2 polaris 200
Is that significant technically, which is what I did not say very well?
>2.yes you can...flash original spl
>3. don´t think so
How do you flash the original SPL then (I am v. newb!)? I don't have that (other than on the device itself).
>4. now problem...but after you flashed original rom
The original rom has been flashed (over) with the official update, I am not really getting the point here? Do you mean my orignal O2 uk WM 6.0 or the original referenced from your thread (RUU_Polaris_HKCSL_WWE_3.19.831.3_radio_sign_25.85.30.07_1.59.42.15_Ship)?
Thanks for the pointer to you rom thread which looks very useful (I am from UK BTW)
Thanks again
cix said:
Thanks for the reply... Sorry to be slow, but...
>1. yes...main difference is touch cruise...polaris 100...o2 oribit 2 polaris 200
Is that significant technically, which is what I did not say very well?
>2.yes you can...flash original spl
>3. don´t think so
How do you flash the original SPL then (I am v. newb!)? I don't have that (other than on the device itself).
>4. now problem...but after you flashed original rom
The original rom has been flashed (over) with the official update, I am not really getting the point here? Do you mean my orignal O2 uk WM 6.0 or the original referenced from your thread (RUU_Polaris_HKCSL_WWE_3.19.831.3_radio_sign_25.85.30.07_1.59.42.15_Ship)?
Thanks for the pointer to you rom thread which looks very useful (I am from UK BTW)
Thanks again
Click to expand...
Click to collapse
1.don´t know exactly but this is what the xda wiki says:
Polaris 100 HTC Touch Cruise P3650
Dopod P860
Polaris 200 HTC Touch Find
O2 XDA Orbit 2
link:
http://wiki.xda-developers.com/index.php?pagename=HTC_Polaris
3. after you flashed original rom->here the link of original spl
http://forum.xda-developers.com/showthread.php?t=381600
4. the 6.1 rom read my thread under steps there is also the original rom link
http://forum.xda-developers.com/showthread.php?t=593750
Many thanks for the info / links ...
Hi,
This is a newbie question. I bought a second hand Cruise running 6.0. I could not find the official rom upgrade to 6.1 but have since discovered the device was originally from Singapore and have found it on the HTC Singapore site.
I have already installed HardSPL as I was going to try some of the ROMs here. Will the official upgrade work with HardSPL?
I don't want to just try and see and would appreciate some advice before going any further.
EDIT
Ok worked it out. All went well
Hi could you tell me how you installed hard SPL? And where you found the ROM. Thanks.
this may be a bit late. I found the rom on the singapor htc website. I just typed in my serial number.
as to hspl i followed the guide
Get the Polaris/HTC Touch Cruise/P3650 - HardSPL & Sim unlocker in
http://www.4shared.com/get/yipzOZx4/PolarisUnlocker.html