Request: RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Sh ip - Wing, P4350 General

I have found no working link for RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship including link given at WIKI. I have googled for above ROM but still no working link.
I need above ROM as i need to go back on official WM5 ROM of mine (from WM6) before installing TOUCH IT. Any help???

Not exactly what you requested but close enough
HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe (official WM6 ROM)
shahkh said:
I need above ROM as i need to go back on official WM5 ROM of mine (from WM6) before installing TOUCH IT. Any help???
Click to expand...
Click to collapse
I'm sure you don't have to downgrade.
I didn't do that and nobody else I know

GAMBIT999 said:
Not exactly what you requested but close enough
HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe (official WM6 ROM)
I'm sure you don't have to downgrade.
I didn't do that and nobody else I know
Click to expand...
Click to collapse
I am already using your mentioned ROM. I have tried HARD SPL and WM6_Hard_SPL.rar. I have also tried BETA3 USPL. I recieve connectivity errors though I am able to run same WM6 RUU (Ship version) successfully. In WIKI its mentioned among known problems that
UPGRADING TO WM6 FROM WM6
(PLEASE DELETE LINE IF CONFIRMED)
Not sure if this is a known\common issue but when you are upgrading from a cooked WM6 ROM to another cooked WM6 ROM you must first downgrade to WM5 otherwise you will get hung at the first boot loader screen

Weird, if your SPL is at least 4.xx.xx the HardSPL ROM should work fine with you. I flashed from original German O2 WM6 ROM to HardSPL WM6 ROM. Then I flashed to latest HTC German WM6 ROM (for a clean base) and from there to any available custom ROM.

Thats what i am unable to understand. It gives me connection error 202 on PC as soon as it goes to BOOT loader. I have seen a few other users making same complaint in HARD SPL thread of olpiro.

I have connection problems too, and they were fixed by uninstalling activesync, then redownloading it from the MS website.
http://www.microsoft.com/windowsmobile/activesync/default.mspx

Resolved
Thanks Issue has been Resolved via USPL and TOUCH IT.

shahkh said:
I have found no working link for RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship including link given at WIKI. I have googled for above ROM but still no working link.
I need above ROM as i need to go back on official WM5 ROM of mine (from WM6) before installing TOUCH IT. Any help???
Click to expand...
Click to collapse
Here is a working link
http://rapidshare.com/files/27470732/RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe
Regards

i found a eaiser way and u dont need a uspl all u need to do is get the stock ruu and run it. your phone is going to restart...simply put it back into bootloader mode without taking off the usb and your done!!!!!

shafez said:
Here is a working link
http://rapidshare.com/files/27470732/RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe
Regards
Click to expand...
Click to collapse
Thanks man ! have a good day !

this is not good rom!

Related

how to flash any ROM to CID locked artemis

1. download ROM you'd like to flash
2. download dutty's good NBHTool
3. download upgrade tool
4. run nbhtool and extract windows.nb from nbh file that came with ROM
5.run upgraderom.bat and keep fingers crossed
6. do hardreset and enjoy
it should work with any ROM, but it upgrades only OS, not radio, ipl spl...
You must have async connection.(dont work thru bootloader)
Hi Are u sure this works..cos I hv tried several times on MDA compact III with no success at all, all the PDAMobiz versions
it worked with t-mo compact3 dutch v. to dopod shipped. try any other rom except pdamobiz. they are crap & helluva lot of people bricked pda with it
It really works
It really works.
Hello phsnake
I have a simlocked ROM on my Artemis (orange).
does this remove the simlock ?
PHONNY: dream again, if it'll be capable of SIMunlock i'll sell it for £1. no unfortunately it doesnt, it only hardcopy os image.it doesnt remove any locks, pwds.... so it can help ie if u buy orbit thru ebay with ?spanish? rom to put there english.....
nothing else. im sorry im not buzz_lightyear, or others. i only compiled something from other sources and explained it
I have upgraded to pdamobiz but would like to try another rom...will it work for me?
Thanks,
It works to me perfectly. Thanks very much.
---------------------------------------------------------------------------------
Ty jsi Slovák?
Also have PDAMobiz powermap 1.1.2 ROM installed on my HTC P3300 but would like a little cleaner ROM. As my device is locked and if this is method is really working, even at least for OS only, I have few questions:
1. Which English ROM is there that I can try and that is atleast AKU 3.01. Newer will be better.
2. ROM supports everything P3300 does - wifi + gps + .....
BTW, if I'll extract the windows.nb from nbh file, whats up with Extended ROM then .... as I understand it wont be included .... am I right. Best option then will be ..... ?
Tnx.
2 cosX: Asi ano ked to mam napisane v profile
2EazyVG:
1. READ WIKI - there are desc. of all ROMs avialable, including AKU versions
2. as above (it means as i remember only t-mo ROMs dont support WiFi - but even t-mo hw so if u have t-mo com.III forget WiFi /except for tmo NE i think)
btw. there will be no extrom, but U can extract all files from extrom thru winimage or so again read wiki
Tnx for your kind reply.
Tnx for your reply.
I tried this and get the following error:
ERROR: ITWriteDisk - An Internal Error occurred.
Tried it on my compact III using the extracted file from the shipped DOPOD rom.
Any ideas on this?
Thanks.
ukguy said:
I tried this and get the following error:
ERROR: ITWriteDisk - An Internal Error occurred.
Tried it on my compact III using the extracted file from the shipped DOPOD rom.
Any ideas on this?
Thanks.
Click to expand...
Click to collapse
The best way is to hard reset your device before upgrading it.
How can I find out CID of HTC p3300?
info 2 command of mtty doesnt't work.
I tried to flash extended rom and OS using NBHTOOL.
But the flash program said that rom was corrupt.
It works perfect big THX
firstly a BIG THANKS to phsnake letting us know this method to upgrade the os.I finally did it todat and flashe my Orbit to the Dopod rom,and thank God everything is well.Thanks once again.
i follow the steps exactly and when i run upgraderom.bat only intializinge and nothing happen
step 5..run upgraderom.bat and keep fingers crossed
what u means by keep fingers crossed ?
moustafatch said:
what u means by keep fingers crossed
Click to expand...
Click to collapse
It means just what it says, that you should keep your fingers crossed while upgrading. Personally, I allways put my left sock on before the right one, too.
Sorry, pun aside, it is just an English expression meaning 'lets hope for the best'. If you are not supersticious, then don't bother.
grun said:
It means just what it says, that you should keep your fingers crossed while upgrading. Personally, I allways put my left sock on before the right one, too.
Sorry, pun aside, it is just an English expression meaning 'lets hope for the best'. If you are not supersticious, then don't bother.
Click to expand...
Click to collapse
sorry
i still don't understand what u try to say
maybe my english is so bad

O2 xda Orbit problem

Hi there, I got my O2 xda orbit 2 weeks ago from germany and I decided to change the german rom to an wwe one, but the phone got bricked and stays on the welcome screen
I think I did a CID unlock but I am not sure. I can get to bootloader but I don't know what to do. How can I put a WWE WM6 on my Orbit? and also how can I check if my battery is above 50%?
Thank you
flash device with original O2 ROM.
regards,
Ok, but the only original O2 roms that I found in this forum are WM5, the original WM on my Orbit was WM6
Have you tried using the original O2DE WM5 ROM, although I am fairly sure that O2DE were one of the first to release a WM6 ROM.
EDIT: Yes, here it is: ftp://htc_us:[email protected]_O2_DE_3.4.207.2_4.1.13.41_02.88.90_Ship.exe
So when I flash the original O2 rom, can I upgrade to an english WM6 and how?
Follow the instructions on the UPSL thread to CID unlock your device. NOTE: Best to use an XP computer, Vista will not work right.
Then immediatly flash the ROM of your choice.
I think my CID is unlocked. I followed the instructions that were in the forum and the spl changed to 1.11.0000. Which ROM file should I put on my device? thx
n1k1 said:
I think my CID is unlocked. I followed the instructions that were in the forum and the spl changed to 1.11.0000. Which ROM file should I put on my device? thx
Click to expand...
Click to collapse
Go for B&B3.7. Stay clear of the O2 Official ROM. It's crap!!!
O2 WM6 rom
use the O2 wm6 upgrade nothing wrong with it really go to their site and download . If you have a UK O2 orbit you will not need to CID unlock it will go on with no problem
Shand359 said:
Go for B&B3.7. Stay clear of the O2 Official ROM. It's crap!!!
Click to expand...
Click to collapse
You don't like it then that is fine, but crap? No. It is wholly stable and works absolutely perfectly.
Shand359 said:
Don't have anything new to add that hasn't been said already.........except that i don't like it. Been using B&B3.7 until last night. O2 WM6 seems like a step backwards from this ROM, not sure why
http://forum.xda-developers.com/showpost.php?p=1410662&postcount=8
Click to expand...
Click to collapse
Yes it is stable, yes it works perfectly.
I still don't like it.
B&B3.7 is very stable. It also works perfectly. plus it also works a damn site faster too.
I am entitled to my own opinion, you are to yours.
n1k1
did you recover device?
you can flash any ROM with USPL installed, read USPL manual.
regards,
Thanks to everybody for their comments, but active sync does not work on my pc when the phone is bricked and stays on the welcome screen so I can't install the uspl... Also when I am able to fix this problem, which rom would you recommend me to upload on my device?
n1k1
1. you need to flash your device with original ROM it was shipped with.
flashing is done from bootloader. activesync will be unavailable, don't bother. just start flasher and follow the wizard.
2. when device is flashed and operational, install uspl.
documentation is supplied with uspl.
3. since then, you can flash any ROM you like.
regards,
n1k1 said:
Thanks to everybody for their comments, but active sync does not work on my pc when the phone is bricked and stays on the welcome screen so I can't install the uspl... Also when I am able to fix this problem, which rom would you recommend me to upload on my device?
Click to expand...
Click to collapse
Hold TOP LEFT button and press in RESET and get device into bootloader. Can't do anything from welcome screen. Then flash the devices original ROM. After this flash USPL and the B&Bv4 as this is the best available...........as of yet anyway.
Hi
I followed uspl instructions. But after stage 1 (White screen) active sync will not connect. Phone connected to charger, still on White screen.
If advice above about bootloader is correct, could someone re-explain with simple steps.
Thanks colink

Can I downgrade after upgraded to WM6

Sorry for asking stupid question....I searched on this forum, couldnt find answers.
I read on official HTC site, that after I upgrade to WM6, I cannot downgrade to WM5 anymore.
I found many customized ROM here (WM6), if I used that ROM, can I downgrade to WM5 after some times?
thx
Of course you can ...
how is that done, do you just overwrite everything with the standard HTC ROM or do you have to delete the Hard SPL and radio upgrades first?
You can do, but once you have WM6 you will not what too...
May be an idea to keep a copy off your orginial rom,
incase you want the exact same one back...
steveecourt said:
You can do, but once you have WM6 you will not what too...
May be an idea to keep a copy off your orginial rom,
incase you want the exact same one back...
Click to expand...
Click to collapse
how can i extract my original version of wm5 from my htc p 3600? i have a "customatized" version with all carriers settings and multi language. it's some programs who can do that? thanks

Can anyone help me to update... pleaaaaase

I've tried to update my HTC3600, by using the "WM6 Official - Any Device" from http://trinityguide.info, and it just doesn't work... I have updated Hard-SPL, and then tried to apply "Official Dopod ROM" ... the only thing it did was to revert my Radio-ROM back to 1.46.xxx (from 1.50.xxx i had before)...
But the OS was never updated to WM6... I have tried a bunch of different WM6 ROMs now during the weekend, nothing has helped... even tried some application to unlock CID (what is it actually ???).
The only thing I've managed is to update my own OS using the official swedish ROM (I've bought my HTC in sweden). And i've been able to update my Radio ROM to 1.46.xxx, 1.50.xxx.. as well as installing different HARD-SPL.
But i've so far not been able to install ANY WM6, or WM5 cooked ROM's .. so pleaaaaaaase help my guides... I'm starting to go nuts over this...
Appreciate any advise & help.. thanks in advance !
maybe Hard-SPL was not applied right\good
did you tried this? http://forum.xda-developers.com/showthread.php?t=293957
thats what i did first and it worked fine.. installed wm6 rom after that

Looking for dutch T-mobile rom

Can anyone help me with this?
I f*cked up my 6.0 update...
Cant find it anywhere on the net...
... So I need the original t-mobile wm 5.0 rom... PLEASE HELP ME!
Farian303 said:
... So I need the original t-mobile wm 5.0 rom... PLEASE HELP ME!
Click to expand...
Click to collapse
there is no wm5 NL version, if you search here there are hundreds of people after the same ROM, no rom here or on the internet.
you can find wm5 EN version and you can search this forum for it.
the phone doesn't start up anymore, only the t-mobile screen will load, the menu won't..... Any suggestions? Its Cid Locked, No original rom....
Farian303 said:
the phone doesn't start up anymore, only the t-mobile screen will load, the menu won't..... Any suggestions? Its Cid Locked, No original rom....
Click to expand...
Click to collapse
First try to hard reset the device (search your manual how that works). If that doesn't work:
Try USPL and a different (WM6) rom a few times. Maybe search for a way to enter the boot loader, that's where/when USPL is executed. If you can enter that, USPL should be able to run I guess.
bricked artemis
Can anyone help me with this?
I f*cked up my 6.0 update...
Cant find it anywhere on the net...
hi Farian 303
i also once bricked my mda compact3.
you probably forgot to use uspl (super cid unlocking) b4 installing your stuff (another rom etc) on it.
The only way is to send it to the company where u bought your telephone. If u have guaranty, then they will restore it for free for you.otherwise unless if u dont have guaranty, then go to erlan.nl and that guy will do it for you for 30 euro.
success
i have a duch wm5 rom but on my divice.... how can i make it to a rominstaller?
neorotic said:
i have a duch wm5 rom but on my divice.... how can i make it to a rominstaller?
Click to expand...
Click to collapse
You can't.
Have you already tried to run USPL again and then flash an other rom on your device????
ofcource... if got 2 divice's
one standaard with wm5 dutch
and one with B&B 4.3
Is this gonna work to unbrick my device? Because i don't know how to USPL from the bootloader?

Categories

Resources