Database Users

Here's a tricky problem, need expertise!! Kind of urgent..

I have read and read and read. I have "bricked" my phone in the past and fixed it. I have used, tested, and flashed many roms from this site (Thanks to all cooks for their work!) but I still consider myself somewhat 'new' to troubleshooting.
I woke up this morning to make some important phone calls today and as luck would have it, my phone was stalled again. It's been doing that for a few weeks now. My last flash was Open Touch 5.0 UL I believe (either that or 5.2 biggy) and it has been working great except for the occasional freeze.
EDIT: Forgot to add, the actual problem is now it won't boot up after it froze this morning. Just sits at the boot screen
So I've tried my other methods of fixing it... /edit
Except this morning nothing is working. I have tried flashing with Orig. T-mobile ruu, tried SD flashing with the RUU_signed.nbh, tried restarting the computer, phone, removing battery and sim... NOTHING! When trying the sd flash (which I've never done before today, it reads and tells me to push the down button but then goes to bootloader screen and just sits there. With the RUU I'm getting err 300 but I'm using the SAME RUU (4.10...) that I've used in the past to reflash my phone AND tried the new one (4.26...)
Possible problem: Does it matter what kind of usb cable you use? I don't have the normal one I use as I am not home but I figured usb is usb...
I've read about it being a motherboard issue, how common is this?
I've read somethings about MTTY, would this apply to me??
Please help, anyone who has any suggestion, I'll try it!!
Stats:
IPL 4.10.0002
SPL 4.10.0000
NOT hard-spl'd
Wing w/ Open Touch Project 5.0 or 5.2

actualy the sd method needs hard spl thats all i can really provide

I appretiate it, that I did not know... I could barely find anything on how to do it even.

im having the same problem bt instead of freezing da screen jus goes different colors or jus goes gray and stays der

Thats basically what mine did. The colors would get messed up and no matter what button i pressed it would not do anything. My advice to you edrift, is BACK UP YOUR STUFF NOW and reflash it asap if you can still reboot. I can get into my phone at all now.

yea i tink i might jus throw my phone away.dis is jus gettin rediculous

P4000 Randomly Failed!

Hi everyone,
Without any mods the phone randomly turned off while writing an email. When I tried to turn it back on I noticed the red text on the white "HTC" screen was gone, it would then reboot and do the same thing over and over again.
I've tried the "restore" with the two dot buttons but it did nothing, The boot loader screen only shows"
"TITA100
SPL-1.01.0000
USB/Serial (depending on if the USB is connected)"
I didn't have time to unlock it so I can't get it past "loading..." when I try to load any ROM. Telus has replaced the phone but I'd like to get something on it, original modified or Linux. I'm also a complete n00b with this so PLEASE help!
I forgot to add, I don't care if it connects to a carrier, only wifi since I'll only be using it around the house. Thanks

PROGRESS!
Alright, I pulled the latest Telus ROM from the executable download on HTCs site as explained somewhere on the forum.
the bootloader shows
TITA100
SPL-2.07.0000
CPLD-9
Click to expand...
Click to collapse
in the red area and
"USB" or "serial" in the white.
Does that help any?
Can someone let me know what is suppose to be on this screen so I can try to figure out where it's getting stuck?

Got it!
I just had to switch back and forth between the two .nbh files in the Telus download on HTC's site. Only issue is wireless isn't working but I'm sure that wont be as hard.
Thanks everyone

Serious HD2 00028002 error CAN"T USE PHONE!

Hello fellow HD2 users,
I've got an HD2 T-Mobile UK. I've just tried my luck with HSPL, I've succeessfully installed HSPL using the steps in this thread: http://forum.xda-developers.com/showthread.php?t=609477
However, when I copied the LEOIMG.nbh (1.48 offiicial rom) file to the micro SD 8GB card; and rebooted, things seemed ok untill it suddenly stopped the progress of flashing the ROM and gave me a Grey screen with the Error 00028002 "not Allow" sort of thing.
So I tried yanking battery out, rebooting normally, it displays a grey triangle with " ! " in the middle and then displays the 00028002 error then back to Tri colour bootloader, I noticed that the HSPL is gone and its back now to 1.42.0000
I even tried a Factory reset, it does the reset I reboot, but it still shows me grey triangle and same routine. I've tried everything now. This bloody T-mobile phone is just useless to me at the moment !
Can you please HELP !!! Thank you so much !
Regards !!

Ok found solution, I just had to install the official T-mobile 1.43.110.0 ROM from this link:
http://rapidshare.com/users/258XUJ
After just switching on the phone with microsd inside, I just plugged the usb and started the RUU and followed the steps and things are back to square one now.
not thrilled that it has been a nightmare so far to get a new rom on.
but at least I can use my phone with its basic functionalities. not gona push my luck again...

You cannot flash official ROMS from the sd because it replaces the SPL with a stock one. Presume it got half way through then decided the ROM was not for your device since it hasd replaced the SPL. Cooked ROMS are ok to flash from SD but for Stock use the RUU.

tell me it's working please.my HD2 from UK T-Mob is same "bricked" and in Slovakia is very very difficult to find somebody who can fix this....i think maybe only the HTC repair center

^
If your phone can load up into the boot loader (tri-color screen) your phone is not bricked.

Deeper Trouble:Same error,but cannot use USB!!!
Guys,
im in even much deeper **** now.I accidentally tried flashing a stock ROM via SD card and now ive gt the same ROM code error.What makes this worse is that my Vista computer is not recognizing any USB connection when i connect my HD2 to the computer.If i need to flash a stock rom via RUU wrapper to get through this stupid ROM code error, i need a USB connection at the first place...which IS NOT WORKING NOW!!!...im sitting duck here guys...i really really need your help on this one.im extremely frustrated and helpless.thanks alot...

When u say USB not working, how do you know?
Put phone in bootloader, connect USB cable,,, on phone does "serial" become "USB"? If yes then just run the flash.

samsamuel said:
When u say USB not working, how do you know?
Put phone in bootloader, connect USB cable,,, on phone does "serial" become "USB"? If yes then just run the flash.
Click to expand...
Click to collapse
Go to this thread Sam as kawshigan started a new thread

semo2010 said:
Ok found solution, I just had to install the official T-mobile 1.43.110.0 ROM from this link:
http://rapidshare.com/users/258XUJ
After just switching on the phone with microsd inside, I just plugged the usb and started the RUU and followed the steps and things are back to square one now.
not thrilled that it has been a nightmare so far to get a new rom on.
but at least I can use my phone with its basic functionalities. not gona push my luck again...
Click to expand...
Click to collapse
broken link

HTC HD2 rom change with non working screen

Hello Everyone.
TBH im my opinion you guys are my last hope to fixing my hd2.
So here's the problem.
I have a HD2 that turns on but does not have a functioning touc screen.
ABOUT MY PHONE:
HTS HD2
Has old android in it ( I dont know which one it is, but i can describe it. It starts up with a BootLoader asking to boot android, so i have the option to press yes or no. It has old blue theme in the background.
Here's the problem. I've called HTC support and i learn my phone still has manufacturers warranty. So basically i can just send in the phone, and ill id have to pay is shipping. BUT! here's the problem. HTC does not approve of third party software installed in the phone, in my case it is the ANDROID. So now im trying to wipe android put, and install windows mobile again. I downloaded the t-mobile stock rom and when i plug in my phone, the windows mobile center automatically pops out but it shows an error symbol.
TL;DR
So my question to you guys is how do i remove Android and install Windows Mobile on an HTC HD2 with a non working screen
Thank you so much guys for even considering to help me
Mod if i posted on the wrong section could you please move it for me.
Thanks

hi,
try this:
http://forum.xda-developers.com/showthread.php?t=956715

Thanks so Much But here's an update
I went ahead and downoaded the HSPL3
I turned on my phone and also pressing the voulme down button which brought to me to a red green and white color. I had my phon conneceted to the computer VIA USB. I first double clicked the T-Mobile rom update thingy and went ahead accpeted the warning signs etc,so the first thing that came up was identifying phone, and after 5 seconds it disappears so nothing came fro that, then later i double clicked the HSPL3 which asked me to either pick the 2.8 or the the 2.8 spl i believe, i had the spl installed so i wen ahead clicked the 2.8. it installed and my phone rbooted and BAM my touch screen worked, and when it asked to boot android i pressed NO. my phone rebooted and iagain the boot loader came up and asked to bott android, so this time i pressed BUt it didnt work because the touch screen stopped working!
So i went ahead to try everything all over but this time i clicked the 2.8 spl and after a minute on my phone it displayed " we hacked it" etc etc etc, i robooted my phone, ad it worked, i turned it on and off twice and it worked i was using my phone after a month So after playing with it alittle bit i decided to put my sim card in it. I turned off the phone and put the Sim card and turned on the phone so i can use it but.....once again the touch screen stopped working... ****!!!!!!

yep, now the touchscreen is once again not working

bump bumpity bump

fusion1204 said:
bump bumpity bump
Click to expand...
Click to collapse
Download a stock WM ROM for your phone, extract and rename your .nbh to leoimg.nbh. Transfer leoimg.nbh. to your SDcard.....enter bootloader mode....there it will flash back to your WM ROM with all HSPL remove. Time to send back to Manufacturer for repair..

Okay hold on. So when you see stock WM ROM coud that be the "T-Mobile_HD2_MR_Software_311...." file? and where can i find my .nbh file?

fusion1204 said:
Okay hold on. So when you see stock WM ROM coud that be the "T-Mobile_HD2_MR_Software_311...." file? and where can i find my .nbh file?
Click to expand...
Click to collapse
extract that from your .exe file.
Stock ROM can be found here
http://forum.xda-developers.com/showthread.php?t=655653
Make sure you use the Stock ROM specific for your phone, else you will brick your phone.

I went ahead and did that, but nothing changed did i do something wrong?

fusion1204 said:
I went ahead and did that, but nothing changed did i do something wrong?
Click to expand...
Click to collapse
Try following this guide....
http://forum.xda-developers.com/showthread.php?t=681317

10507 Thank you for the links but it didn't wok for me.
UGh!
Am i doing something woring? i mean i can get to the screen where it shows the foru colors, i guess that would be flashing and once i get there i can't do anything else the only way for me to do anything while im on that screen is if i have it connected in with my computer, and also start runinng the HSPL program which switches from Hspl to a NON hspl vice versa.
I hope youre not tired of me lol!
please help me out with this stupid situation im in.
Thank you.

Bumpity bump please help me out

[Q] Recover Fail - No boot White screen

Hello, and sorry for the post asking for assistance!
been driving me nuts for 2 days now, it seems i'm having a major case of melting HD2
it started with the phone freezing often, reboot solved it.
then, it went to having to unplug battery for a few, and, reboot fixed it.
now i'm at a constant white screen (no htc logo)
was running in Android but tryign to just get anything working for now.
i made the sd card leoimg.nbh with a custom rom to recover it, but i can't get it to finish
in red : Radio_V2 Fail
in blue : all the rest
tried to flash radio update, failed
tried to update the HSPL version (2.8one now) but no go, it shows "success" but in bootloader shows the same old version.
what can be the cause of this, exept memory nand being screwed?

greug said:
what can be the cause of this, exept memory nand being screwed?
Click to expand...
Click to collapse
CPU and its BGA balls!

Not alot to be done i think...
Keeps coming up on white screen.
Tries to flash HSPL (newer version) finishes but it still shows the same version when powering +volume MIN.
Tried to flash a Radio, comes up with an error Radio V2 error
Tried to push a ROM on there, gives a "image file is corrupted"
Tried what i found here on the different forum threads but....seems my HD2 gave up on me...or at least it's beyond my repair skills.
Thanks for those before me who gave suggestions on what to try, it's a damn sad day i loved that phone..
wts : one slightly bricked phone

Try to do a Task29. Use the HD2 Toolkit for that.

You have to JTAG it in order to recover it. RADIO_V2 means it's radio, and it's officially bricked. There's nothing you can do other than JTAG to recover it

Well, in a way i'm glad i have the answer now about the V2 being the radio ...
Thanks for the input guys, not sure i'm going to bother with the JTAG story, already ordered a replacement for my HD2 as it is, can't spend too much time without my phone.
Anyone knows if people are interested for the "bricked" HD2's? or how to reach people?