Related
Hi, I have flashed several ROMs, anyway today I got an HD2 from a friend who said his HD2 that he just bought kept restarting, so I thought I could try couple things to help him out.
1) I placed HSLP 2.08 on the Tmobile USA HD2
2) Then I proceeded to install and run TASK 29 from the HD2 forums (http://forum.xda-developers.com/showthread.php?t=644781) using ShaDrac repack by using the youtube video
3) I proceeded to install Energy 21916 from HD2 USA Rom Development
4) Now, it froze on the Energize screen, one the first boot, for about 15 minutes, so I thought maybe it does not have a radio
5) Downloaded Radio Leo_RADIO_2.10.50.26 and when to the BootLoader screen to install
6) At bout 98% a message showed up and the phone rebooted stating Software Update failed! Please try again! Something similar showed up on the PC.
I would appreciate it if someone would advise further. At this point I am going to try the MTTY process from the forum "Possible sollution to unbrick TMOUS HD2/EU HD2"
Thanks
4) Now, it froze on the boot screen for about 15 minutes, so I thought maybe it does not have a radio
Click to expand...
Click to collapse
Did it freeze while the progress bar was on the screen or while the bootloader was on the screen?
And does the bootloader show 2.08.hspl or 2.08.0000?
Try to flash original ROM from T-mobile and try , if not try to flash from the memory card
and any bright ideas if it doesn't go into bootloader mode? appreciate ur suggestions!
WBR
ReyTech.
Scabes24 said:
Did it freeze while the progress bar was on the screen or while the bootloader was on the screen?
And does the bootloader show 2.08.hspl or 2.08.0000?
Click to expand...
Click to collapse
It froze after the progress screen, like when it suppose to load the rom for the first time. After I did task 29 again, I put the original T-mobile Rom RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15 .29.50.07U_2.06.50.04_TeleNav-5.5.42.zip via the memory card. This converted my SPL to 2.00.1000, which is what I have now.
ahmedmph said:
Try to flash original ROM from T-mobile and try , if not try to flash from the memory card
Click to expand...
Click to collapse
I put RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15 .29.50.07U_2.06.50.04_TeleNav-5.5.42.zip via the memory card but it failed when it got to part of trying to put the radio, I had to pull the battery and restart it, now it just turns on with a Triangle enclosing an exclamation point, not even the T-Mobile stick together logo.
It goes into Bootloader but gives the Rom error.
"Just to confirm can I take it to a T-Mobile store and ask them to replace it telling I was trying to update the official rom, and it froze on me.
Given that it gets stuck on Triangle with an Exclamation point, when I turn it on, it does NOT show the T-Mobile boot screen logo, probably task 29 took that away not sure."
Double Posted
I did that before with siemens and it worked !! they replaced the phone . . it was SX1 in that time
ahmedmph said:
I did that before with siemens and it worked !! they replaced the phone . . it was SX1 in that time
Click to expand...
Click to collapse
I just spoke with a store rep, he said to call T-mobile smart phone tech support. Tech support says, they can't do anything if I am not the original owner of the phone.
In addition, he told me that the Triangle with the exclamation point, is something from Android, not Windows. He has never seen or heard anything like that for HD2.
Asked me to call HTC and ask them to replace it.
U never call T-Mobile, especially with a hacked SPL, no way they would do anything, but if they ever did, u would be screwed
Hello guys,
I got a HTC HD2 today from ebay, the seller has 100% feedback.
I have done a search about my problem but I dont wanna do anything wrong on the phone if the phone is faulty and send it back.
My situation was, I got the phone, inserted my SIMcard and set all the first settings. after 2min someone called me, when I answered the call couldnt hear anything and the phone was frozen :\ after few seconds the phone reboot itself and I waited 5min to see if turned back on, but didnt :\
I've tried pressing the yellow reset botton near the battery, I've tried hard reset.
And if I press VOL down and turn the handset on thats the info I get :
PB81120 SS-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
and on the bottom of the screen says SERIAL, nothing else
I've got the phone from America (T-mobile) I'm in australia, melbourne
I've worked hard to get this phone and now when I got, could only use it for couple minutes
Please help me asap.
Thank you and sorry open other topic about it
Guessing its TMoUS HD2 Leo1024. BTW what rom is installed on it did you get to notice while you had it? Something is odd here you are not sharing with us how does it go and get stuck in that screen.
Well to be safe if you don't know flash it. So don't matter remove the battery and restart it and go to bootloader mode by pressing power button while holding down the bottom volume button. Then connect the device to your PC via USB mount and download and run HSPL or you can do it via stock rom go download 2.10 from WM dev archive thread.
I just got the phone today :\ the seller said to me the phone is the tmobile version 512mb. I'm a bit noob with HTC, Ive been with iphone until today. well, Im not sure which rom I had, but I think its LEO.
Ive tried all afternoon, I removed the battery out of the phone for 2 hrs, then tried again(without SIMcard) and the phone started up again as new settings and asked me to put my simcard in, so I removed the battery and put the simcard in, turned the phone on, it got stuck again in STICK TOGETHER screen
I dont wanna be inconvenient about all my questions, I just want my phone fixed :\
I couldnt do anything with the phone cos I set up the settings, after couple min got a call and the phone froze and it reboot it self stucking in STICKY TOGETHER screen. I was trying to flash it, but how can I sync my phone with windows 7? cos if I put in bootloader screen, it says USB at the bottom but WMDC says device not conected.
Do you have any solution for my problem?
thank you for your reply
Ahhh as you said TMobile I naturally thought it would be Leo1024(HD2-US) but now that you say its 512mb thats not TMobile you are using Leo512(HD2-EU). I had a feeling you flashed your rom as you flashed wrong one then.
So to verify post the HSPL and ROM data from where you got it from so we know. Also visually verify your actual device does it say TMobile on the top? does the button have colors? If both = yes its TMobile.
My phone has T-Moline on the top and has colors on the buttons. its definately t-mobile. I asked the seller and he said was 512, maybe he is wrong.
I havent done anything to the phone I cant flash cos I cant even conect with my computer the phone came from USA. I'm in australia
thank you
If it's a USA TMobile, then it's not the 512 version, and you need to flash only US TMO compatible ROMs or you could brick it.
When you say you tried a hard reset, how did you do that?
It should be when the phone is off you hold down both volume up and down, and keep them held down, then briefly press the power button but keep holding the volume buttons.
What happens when you do that?
Try to flash it through the sd card.
- Download the rom you want, uncompress the files, rename the nbh file to LEOIMG.nbh
(The original HTC rom files can be uncompressed too, even if they are .exe files - you will find a .nbh file inside)
- Copy this file to the root of the sd card.
- Reboot while pressing volume down.
It should start to flash the new rom.
That's what I called Hard reset
I'm doing it again and comes up a grey screen saying
This operation will delete all ur personal data, blah blah blah..
Press VolUp to restore manufacturer default, or press other keys to cancel
I pressed VolUp
..restore..completed
Press VolUp to bootup
Jeckas said:
That's what I called Hard reset
I'm doing it again and comes up a grey screen saying
This operation will delete all ur personal data, blah blah blah..
Press VolUp to restore manufacturer default, or press other keys to cancel
I pressed VolUp
..restore..completed
Press VolUp to bootup
Click to expand...
Click to collapse
Well if that appears to work, but doesn't, you could have a real problem there. Do what joooe suggested above - that's the only option you've got left, without sending it away for repair.
joooe said:
Try to flash it through the sd card.
- Download the rom you want, uncompress the files, rename the nbh file to LEOIMG.nbh
(The original HTC rom files can be uncompressed too, even if they are .exe files - you will find a .nbh file inside)
- Copy this file to the root of the sd card.
- Reboot while pressing volume down.
It should start to flash the new rom.
Click to expand...
Click to collapse
how can I know the right ROM for my phone, cos the seller is saying its t-mobile 512mb and @johncmolyneux says that t-mobile is 1024mb
I dont wanna brick my phone at all.
I'm from portugal but I'm in australia, let me know if you can help me flashing my phone detailed. regarding I'm noob about it :\
thank you
or what ROM do you recomend for me?
can I provide you more info about my phone? to get the right ROM for me.
thank you
AFAIK, if it says T-Mobile on it and it has coloured call buttons then it's a US TMobile. Only the US ones have coloured buttons, and they're all 1024MB ROM.
May be wise though to wait for someone else to confirm this, as you've got me doubting myself now!
what would happen if I install AFAIK rom and then my phone is 512mb? would brick my phone? I would be unable to use my phone anymore? thank you so much for all ur help guys
Jeckas said:
what would happen if I install AFAIK rom and then my phone is 512mb? would brick my phone? I would be unable to use my phone anymore? thank you so much for all ur help guys
Click to expand...
Click to collapse
I don't know if it's 100% bricked afterwards, but you do need to install a compatible ROM, made for your device, so you need to be sure which one it is. It's really not worth rushing this and trying to just install a ROM as you may irreparably damage your phone.
ok, I will follow ur advice
should I follow this thread?
http://forum.xda-developers.com/showthread.php?p=6894936#post6894936
how can I make sure is 512mb or 1024mb?
but it says :
1024LEOs (from T-Mobile with 1024ROM) ARE NOT SUPPORTED
but then if my phone is T-mobile with 1024ROM
I can follow this one yeh?
http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893
thank you very much
Like I said earlier, wait for a while and let someone confirm that it is indeed a 1024MB ROM, or you will probably brick it and not be able to fix it.
HSPL3 works on all types of HD2 though, so you can flash that. Those links are both actually the same thing.
Just don't flash a ROM until you know 100% that you have the right type.
It is the TMOUS 1024 LEO.
Go to the HTC website and download a T-Mobile USA ROM, you are required to enter the phone's serial number. This will guarantee that you only download a ROM that is suitable for your phone.
Since you really just want to test the phone then go for the 2.10 ROM.
Firstly press and hold the Volume Down button, then tap the power button. This will bring you into Bootloader Mode (as you previously have done). When you plug in the USB cable to the computer the 'Serial' on the phone's screen will change to 'USB'.
As an administrator run the ROM and just tick the box about activesync.
thank you.
can I provide more info about my phone? to make sure for everyone?
thanks
Jeckas said:
thank you.
can I provide more info about my phone? to make sure for everyone?
thanks
Click to expand...
Click to collapse
I was 99.9% sure and just wanted someone else to agree really.
Basically, US T-Mobile HD2 are the only ones in the world with green and red call/end-call buttons, and every US T-Mobile HD2 has 1024MB ROM. If the guy you bought it off said it was 512MB then that would explain why it's in its current condition. It sounds like he believed it to be a 512MB version, and flashed a bad ROM. It also sounds like he's palmed it off on you, believing it to be knackered.
As fred_up said, go the the HTC site and download an official ROM for that device. You should be able to install that with no issues and see if the phone definitely works or not.
Good luck mate
@fred_up
do I have to flash first with this HSPL3?
I have downloaded and the phone was detected I went just to the step to select HSPL version to install
the choices are :
2.08.HSPL
2.08.0000
what should I do first?
I will try to find the rom on HTC website.
thank you very much
I installed maglar 1.12 on my hd2 using the nbh file method... now my hd2 wont turn off it just restarts as soon as you turn it off or put the battery back in.... when in magldr the button lights flash repeditally.... I can still flash roms using maglr usb method but when the roms are booted up the button lights are on constantly even in sleep, it seems to recive random input, and you cant put it in sleep mode and when it goes into sleep mode naturally you cant turn it back on........ My first thought was to try and to go back to stock but because I dont have a windows mobile rom on I cant use the active sync method and for some weird reason it wont go to the bootloader(yes I know how to get to the bootloader I am not and idiot)........ so I am stuck and dont know what to do
nchar123 said:
I installed maglar 1.12 on my hd2 using the nbh file method... now my hd2 wont turn off it just restarts as soon as you turn it off or put the battery back in.... when in magldr the button lights flash repeditally.... I can still flash roms using maglr usb method but when the roms are booted up the button lights are on constantly even in sleep, it seems to recive random input, and you cant put it in sleep mode and when it goes into sleep mode naturally you cant turn it back on........ My first thought was to try and to go back to stock but because I dont have a windows mobile rom on I cant use the active sync method and for some weird reason it wont go to the bootloader(yes I know how to get to the bootloader I am not and idiot)........ so I am stuck and dont know what to do
Click to expand...
Click to collapse
what happens when you try to go to bootloader?
Bro, try flashing any windows mobile 6.5.* rom on your hd2..
To do so, enter hd2 in bootloader mode,
Keep pressing DOWN + POWER when device is switchd off initially
and flash any rom.
This will surely help you
orangekid said:
what happens when you try to go to bootloader?
Click to expand...
Click to collapse
Yes what happens when you try to boo into bootloader?
strange mate!!!
when you ask for help be positive!!!!
use wise words....i stood 5 min to reply u or not!!!
because no one is an idiot on XDA,....
flash radio 2.15 first!!!
if ur phone want work
than
flash from SD card your custom rom 6.5 (search for the steps on xda)
your phone want start for sure!!!!!
but you will get back you bootloader back
1-HSPL
2-T29
3-Mag-loader 1.13
4-flash radio 2.15
5-flash your ROM
nchar123 said:
I installed maglar 1.12 on my hd2 using the nbh file method... now my hd2 wont turn off it just restarts as soon as you turn it off or put the battery back in.... when in magldr the button lights flash repeditally.... I can still flash roms using maglr usb method but when the roms are booted up the button lights are on constantly even in sleep, it seems to recive random input, and you cant put it in sleep mode and when it goes into sleep mode naturally you cant turn it back on........ My first thought was to try and to go back to stock but because I dont have a windows mobile rom on I cant use the active sync method and for some weird reason it wont go to the bootloader(yes I know how to get to the bootloader I am not and idiot)........ so I am stuck and dont know what to do
Click to expand...
Click to collapse
People he can not flash anything having to do with flashing via the SPL bootloader, this is why Orangekid and I both asked what happens when the OP trys to boot into bootloader.
calm down everyone!
lol
sorry, like others have mentioned, what exactly happens from start to finish when you try and get in to the boot loader, yes i know you said you know how to do it
but humour us, start to finish, buttons you push, whats on teh screen, everything.
sounds like something in the SPL has been screwed, been a lot of that recently which is a bit odd.
I can not get to the bootloader
I know that I cant get to the bootloader I tried the way you said above again and it just goes stright to magldr so I can not flash back to stock ........ I took it to a phone repair guy who said he fixed it and it appeared like he did but then two hours later it started again .......
Here is a video of my phone
*htt*p:/*/ww*w.y*ou*tube.c*om/watch?v=U7h3flLrE5g** I put the stars because I can post links right now but this is a video of my phone
nchar123 said:
*htt*p:/*/ww*w.y*ou*tube.c*om/watch?v=U7h3flLrE5g** I put the stars because I can post links right now but this is a video of my phone
Click to expand...
Click to collapse
Ok everyone as you can see he can not get the SPL bootloader to come up.
I will help you out with your Youtube link too.
I am very sorry to tell you but without being able to get to the bootloader you can not flash a official ROM back to the HD2 so you can not send it in for warranty exchange our repair. That is unless there is some miracle program out there that you can run from your computer to force the bootloader to bootup, which i have never heard of one. (Note to Devs that would be a awesome program to create if it is possible )
There is the bootloader.exe but you already have to have a Sync type connection for it to work and i don't know if the connection you get using Zune is enough. I attached the a EnterBootloader.zip file but like I said i don't know if it will help you are not. Try connecting and syncing your HD2 with Zune and then try to run the EnterBootloader.exe from your computer and see what happens.
Thanks for the program but when I try to run it in windows phone 7 it gives me the error that it is not a valid windows phone 7
Is there a way I could update or change magldr without the bootloader? or is there any sort of windows mobile rom I could install through magldr like you would with android or wp7?
I mean sorry it gives the are that it is not a valid win32 aplication not windows phone 7 that was a typo
nchar123 said:
Is there a way I could update or change magldr without the bootloader? or is there any sort of windows mobile rom I could install through magldr like you would with android or wp7?
Click to expand...
Click to collapse
Was shocked to watch your video !!
there is no way to flash windows 6.5 roms directly through MAGLDR..
would suggest you to get HD2 to nearby mobile repair center, hopefully they can help you out
Do you know of one around san diego or a place that could do jtag?
nchar123 said:
Do you know of one around san diego or a place that could do jtag?
Click to expand...
Click to collapse
I know someone in that can JTAG your HD2 buit he lives in Texas, but he is very good and experienced with JTAGing HD2s, PM me if you want more info as it would be against the rules for me to provide any other information in the forums.
Also I do not think you need JTAG but just need your voulume rocker fixed, but he is still the guy to do it.
the volume buttons should be easy to test within windows its self
I doubt its MAGLDR issue, it looks like an SPL issue.
could you tell me how much the jtag would cost and the volume down and up buttons work when the wp7 build is up
I bought an HTC HD2 FEW WEEKS BACK FROM ONE OF MY FRIEND.
I DO NOT HAVE THE HISTORY OF WHAT HE TRIED TO DO WITH IT.
BUT BECAUSE IT WAS STUCK/DEAD , HE GAVE TO ME FOR CHEAP.
NOW THIS PHONE IS UNDER WARRANTY TILL AUG-2012 AND IS FROM VODAFONE.
(EVEN AFTER INSTALLING ANDROID IT IS VOID)
HE MUST HAVE TRIED SEVERAL ROM/HSPL TO GET TO THIS POINT.
PROBLEM:
When I power up the phone, it displays a NRG LOGO SCREEN (energize software), and it gets stuck on it forever.
When I do hold the volume down + power button, then it comes up with the three colour screen and it says SPL-2.08.0000, AND also says rom update failed (only if i try to install and then start up)
The phone does connect through USB when it is on the three colour screen, but it does not let me install ANY OF THE romS or the spl'S...
I have tried literally every single step possible. I have tried to do task 29, i have tried install the original rom, i have tried to put the rom in the sd card and try it that way.. I have also tried to do hard reset... vol up and down and it does not complete either..
I best rom it let me install was 99% of 2.10.50.19.2.. but after 99% it got stuck .. it seems like it gets stuck within 1 min or so.. anything you do!
Some times after several hundred attempts, it does let me change the spl... as it was displaying 3.... before then i changed to 1.4..... and then to 2.08...
All i want to do is to get rid of the NRG SCREEN, so i could send to the htc ,, for repair ( i know that it is not under warranty if i used andriod, but they will not know) .. or is there any way to completely format the phone,,, is there any solution to install andriod or microsoft? pls help
Before we start, you can ask him how his device has ended up like this, can't you?
boxboy said:
I bought an HTC HD2 FEW WEEKS BACK FROM ONE OF MY FRIEND.
I DO NOT HAVE THE HISTORY OF WHAT HE TRIED TO DO WITH IT.
BUT BECAUSE IT WAS STUCK/DEAD , HE GAVE TO ME FOR CHEAP.
NOW THIS PHONE IS UNDER WARRANTY TILL AUG-2012 AND IS FROM VODAFONE.
(EVEN AFTER INSTALLING ANDROID IT IS VOID)
HE MUST HAVE TRIED SEVERAL ROM/HSPL TO GET TO THIS POINT.
Click to expand...
Click to collapse
Sir, you have forgotten your caps locked.
boxboy said:
PROBLEM:
When I power up the phone, it displays a NRG LOGO SCREEN (energize software), and it gets stuck on it forever.
When I do hold the volume down + power button, then it comes up with the three colour screen and it says SPL-2.08.0000, AND also says rom update failed (only if i try to install and then start up)
Click to expand...
Click to collapse
Because you have stock SPL, you won't be able to install any custom ROM or any stock ROM not made for your region/SN.
boxboy said:
The phone does connect through USB when it is on the three colour screen, but it does not let me install ANY OF THE romS or the spl'S...
I have tried literally every single step possible. I have tried to do task 29, i have tried install the original rom, i have tried to put the rom in the sd card and try it that way.. I have also tried to do hard reset... vol up and down and it does not complete either..
Click to expand...
Click to collapse
AFAIK, task29 is, also to be considered, a custom rom so it needs HSPL to be flashed. Are you sure you have followed the steps correctly?
boxboy said:
I best rom it let me install was 99% of 2.10.50.19.2.. but after 99% it got stuck .. it seems like it gets stuck within 1 min or so.. anything you do!
Some times after several hundred attempts, it does let me change the spl... as it was displaying 3.... before then i changed to 1.4..... and then to 2.08...
Click to expand...
Click to collapse
That is not a ROM, it's a radio. You need to flash HSPL to be able to change the splash screen (NRG Screen). HSPL should go like this: SPL 2.08.HSPL .
boxboy said:
All i want to do is to get rid of the NRG SCREEN, so i could send to the htc ,, for repair ( i know that it is not under warranty if i used andriod, but they will not know) .. or is there any way to completely format the phone,,, is there any solution to install andriod or microsoft? pls help
Click to expand...
Click to collapse
Microsoft is a corporation, Windows Phone is the OS .
One more thing, to be able to flash a LEOIMG from sd, the .nbh must be a rom that is compatible with your device (It will work if you get it from htc.com using the device's serial number)
I hope this helps. And I'm sorry if I am incorrect at something.
Good luck.
------------------------------------------------------------------------------------------------------------------------------------------------
To summarize it, you need to do either one of the following:
1- Install HSPL, and do what you want.
2- Go to HTC.com, download a rom using your Serial Number, rename file to .zip, extract the .nbh file, rename to LEOIMG.NBH [Capital letters], put onto sd card and insert into phone, boot up device while holding volume down ONLY, and make sure splash is removed and you're back to the "htc" stock, then send to repair [why?].
posting teh same post in multiple sub forums is considered rude
http://forum.xda-developers.com/showthread.php?t=1440265
Yeah, HSPL is needed for flashing pretty much everything. One thing you could do would be to flash a stock ROM from your SD card (just google it I CBA to provide links and stuff) which would reset everything to factory WinMo (including SPL to SPL3.03 [assuming you flash the latest ROM 3.14]) and from here it would basically be a fresh start. Probably the safest route without HSPL
Hi.
Thank you for your replies...
Let me tell u guys if I forgot to say earlier. The mobile phone is not letting flash any of the Hspl... be q series, 2 series or 3.series... all the times it says error 0000006 and 000000010 etc... a couple out of hundreds it did let flash but then it doesn't let me flash the factory rom fom HTC.
I have succesfuly flashed the 3.03 hspl... bit still no success in flashing any roms ... it gets stuck sometimes at 99% and sometimes at 0% and sometimes it comes up with a scrambled screen and stuck
OK,
My final.outcome.
This phone let's me flash the hspl but it doesn't let me flush any roms including the original HTC factory rom.
I can also perform the task 29. Etc but still the NRG screen is still there.
I would like to know that if I flash the original Split and send it HTC, will be repairable for free? Sure? Even with the NRG.
now i think the only option available to you is jtagging the device which may permanently void the warranty !!
it had happened with me once, but somehow it got solved !
i used to randomly install clk, magldr, radios, hspl etc multiple times !
it used to get stuck while installing and then i used to remove the battery and try again !!
somehow it started ! !!
STRANGE DEVICE !!
Yeap its a real problem!!
Now , It will not let me change the hspl to spl whatsoever I do.
I would like your suggestions
I bought this brick for £50 and I can return it to get my money back. Has any used jtagging and does it 100% work?. The thing is if I do used jtagging, and if it doesn't work ,then I can,t return it!. How much does it cost and is it worth it?
jtagging will solve your problem !!
they remove the motherboard of the device and flash the os into the motherboard directly through a device named riff box !!
refer this video for more info !!
http://www.youtube.com/watch?v=zElsUERTzOU
but pls do not try this at home ! !!
just contact a local repair shop to jtag your device !!
also u can contact these guys from the video !!
good luck ! !!
boxboy said:
I have succesfuly flashed the 3.03 hspl... bit still no success in flashing any roms ... it gets stuck sometimes at 99% and sometimes at 0% and sometimes it comes up with a scrambled screen and stuck
Click to expand...
Click to collapse
Check that the micro USB connection isn't "wobbly".
I had a TMOUS HD2 and never had any issues. Then, I sold it and got a Telstra HD2 and had big issues getting ROMs installed until I realized that the connection at the phone was a little weak. I can't send any updates to WP7 via cab sender unless the phone is in a certain position to keep the connection from breaking.
boxboy said:
I bought an HTC HD2 FEW WEEKS BACK FROM ONE OF MY FRIEND.
I DO NOT HAVE THE HISTORY OF WHAT HE TRIED TO DO WITH IT.
BUT BECAUSE IT WAS STUCK/DEAD , HE GAVE TO ME FOR CHEAP.
NOW THIS PHONE IS UNDER WARRANTY TILL AUG-2012 AND IS FROM VODAFONE.
(EVEN AFTER INSTALLING ANDROID IT IS VOID)
HE MUST HAVE TRIED SEVERAL ROM/HSPL TO GET TO THIS POINT.
PROBLEM:
When I power up the phone, it displays a NRG LOGO SCREEN (energize software), and it gets stuck on it forever.
When I do hold the volume down + power button, then it comes up with the three colour screen and it says SPL-2.08.0000, AND also says rom update failed (only if i try to install and then start up)
The phone does connect through USB when it is on the three colour screen, but it does not let me install ANY OF THE romS or the spl'S...
I have tried literally every single step possible. I have tried to do task 29, i have tried install the original rom, i have tried to put the rom in the sd card and try it that way.. I have also tried to do hard reset... vol up and down and it does not complete either..
I best rom it let me install was 99% of 2.10.50.19.2.. but after 99% it got stuck .. it seems like it gets stuck within 1 min or so.. anything you do!
Some times after several hundred attempts, it does let me change the spl... as it was displaying 3.... before then i changed to 1.4..... and then to 2.08...
All i want to do is to get rid of the NRG SCREEN, so i could send to the htc ,, for repair ( i know that it is not under warranty if i used andriod, but they will not know) .. or is there any way to completely format the phone,,, is there any solution to install andriod or microsoft? pls help
Click to expand...
Click to collapse
Don't worry ... you can give the life to your phone back... it shows fail bcus u have 2.08.0000.. so it means u Sud have 2.08 v hspl.. so try flashing hspl by getting into bootloader(3 colour) by pressing volume down + power Then flash hspl.. but remember select 2.08v.. then again after flashing hold volume down + power.. bootlooder.. then flash magdlr 1.13 ... now the phone will boot into a black screen with written mangdlr.. wen the black screen magdlr screen comes then press power off for 5mintzz.. follow the guide to flash.. there is a stick thread in NAND DEVELOP... U can get the windows version back to your phone to get the warranty...
Sent from my HTC HD2 using Tapatalk
Ok ,, some good new at last ..
I have used the HSPL4 to change my 3.03hspl to 3.030000 spl...
Success, as when i go to the tri colour screen it says spl and no hint of hspl...
Bad news, is that i still cant get the rom flashing,, as it gets stuff at some point and mostly at 99%.. Have tried both ways through SD (leoimg) and through USB.
Now final question is ... When i on the phone a big logo of NRG (ENERGIZE) writtten comes up and it gets stuck there.. the phone has SPL .. so it still under warranty to return it?.. I still have all the void sticker intact.
boxboy said:
Now final question is ... When i on the phone a big logo of NRG (ENERGIZE) writtten comes up and it gets stuck there.. the phone has SPL .. so it still under warranty to return it?.. I still have all the void sticker intact.
Click to expand...
Click to collapse
did you try to flash just a splashscreen as i suggested in your other thread? (they can be flashed alone, no need for a whole rom, , just like radios)
if you can get a stock splashscreen on there you are sorted.
Maybe try to download the original Software from HTC.
With you serial number you can get the latest windows for this phone.
Flash the Software you get from HTC.
If this is working ok you can try to install any Android ROM.
Read at first this
http://forum.xda-developers.com/showthread.php?t=905841
Try to understand and follow the steps..
But if you have even no luck with original Windows soft. You will also (maybe) have a lot of probs. with Android..
Thank you guys for all your help..
I have flashed andriod on several phones some time ago and I actually forgot the right steps to follow.
But this phone is unique is not letting me finish.
After following all the right steps, i wasnt able to install a rom succesfully even after installing the HSPL... and I am also not able to install the factory rom from htc on either the hspl or spl settings.
But i now got rid of the NRG screen and I have also installed the spl 3.03.. When you on the phone, it displays software upgrade failed..
So I have now sent the mobile to HTC as it is under warranty. I will then re-flash andriod following the right steps and see what happens!
Thanks again!
My mobile came back from HTC with a week.. Looks like a brand new one!
In the letter it says the replaced IMEI, PCBA, FL BD, W/O_ REGIONAL_ID, LEO
WOW
GREAT PHONE... ITS MUCH FASTER THAN THE PREVIOUS ONE FOR SOME REASONS
Hello!
I am new here as you can see. this is not primary proplem anymore.
I installed XDAndroid GBX0C 2.3.7Build to my HTC balckstone and everything works well, but camera tells me "camera error; Cannot connect to camera."
is there any fix for that?`
and the other thing, when i boot phone it goes to win6.1 and i have to go settings etc. and boot it from haret.exe.
so am i done something wrong or something? Solved
So if somebody can help me i would be very pleased
Ps. And sorry my bad english, i just a finnish.
Edit: I try reinstall, i post is changes comes.
E: No changes, still not working.
EDIT!!!!
SO if someone can help me, place do it
E.
And this just happend, phone just stop working whit black screen.was have to took battery off, and then it took about 10-30min to boot to win again.
THIS IS PRIMARY PROPLEM.
AAAAND now it wont even start. stuck in "smart mobility"...
Please read post's for more information.
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
Could I solve this proplem if i unlock and install custom rom? just wondering if that would help?!
Hi,
"Smart Mobility" screen
I had that problem too, and did a hard-reset.
Hold Volume Up + Volume Down buttons (hold hard) and press Power switch until you see the warning sign to confirm a hard reset.
The system will do a re-flash of the original Windows Mobile ROM.
Start Android by running HaRET from Windows Mobile
Yes, you have to run HaRET.
You can make it simpler by making a short-cut in Windows Mobile Start Menu.
Tap and hold on HaRET until you see the Dialog Box to Cut, Copy, etc.
Tap Copy.
Go to Device-Windows-StartMenu, paste as a shortcut
These steps are in the Touch HD Manual. If you do not have one, download it from the HTC website.
chan.sk said:
Hi,
"Smart Mobility" screen
I had that problem too, and did a hard-reset.
Hold Volume Up + Volume Down buttons (hold hard) and press Power switch until you see the warning sign to confirm a hard reset.
The system will do a re-flash of the original Windows Mobile ROM.
Start Android by running HaRET from Windows Mobile
Yes, you have to run HaRET.
You can make it simpler by making a short-cut in Windows Mobile Start Menu.
Tap and hold on HaRET until you see the Dialog Box to Cut, Copy, etc.
Tap Copy.
Go to Device-Windows-StartMenu, paste as a shortcut
These steps are in the Touch HD Manual. If you do not have one, download it from the HTC website.
Click to expand...
Click to collapse
I have tried hard reset, but that didn't work, and tried to put original rom too, and nothing happened. I have 2 original roms
RUU_BlackStone_HTC_FIN_1.14.414.2_Radio_52.49a.25.26_1.09.25.14_Ship
RUU_BlackStone_HTC_FIN_1.56.414.0_Radio_52.62.25.34_1.13.25.24_Ship
but those didint work. i will try today againe. and then if it going to work i will put that haret to start menu.
I'll try that 1.14 first...
flashed that 1.4 rom and waited about an hour and nothing happend... i jsut did hard reset and wait againe if it gonna boot now...
i was thinking that should i put custom rom, coz if something went wrong whit the official?
I mean if there is something wrong in phones hard drive? like something wrong whit registery or something?
something that wont let win start. if there is, how i can fix that?
masentava said:
Hello!
I am new here as you can see. this is not primary proplem anymore.
I installed XDAndroid GBX0C 2.3.7Build to my HTC balckstone and everything works well, but camera tells me "camera error; Cannot connect to camera."
is there any fix for that?`
and the other thing, when i boot phone it goes to win6.1 and i have to go settings etc. and boot it from haret.exe.
so am i done something wrong or something? Solved
Click to expand...
Click to collapse
GBX0C2.3.7 Build is on SD card.
You will need to boot from Windows Mobile first, then run HaRET to reboot to XDAndroid.
If XDAndroid hangs, you need to remove battery, put back battery and power on. Then you see Windows Mobile and do above step again.
Always, from XDAndroid to go back to Windows, you need to Power Off, and then Power On again.
chan.sk said:
GBX0C2.3.7 Build is on SD card.
You will need to boot from Windows Mobile first, then run HaRET to reboot to XDAndroid.
If XDAndroid hangs, you need to remove battery, put back battery and power on. Then you see Windows Mobile and do above step again.
Always, from XDAndroid to go back to Windows, you need to Power Off, and then Power On again.
Click to expand...
Click to collapse
I undestood that... but thats not the proplem anymore coz windows wont start, its stuck in "smart mobility"
i tryed to flash original rom's bot that didint work....
so prolem is how do i get windows back to work?
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
masentava said:
I undestood that... but thats not the proplem anymore coz windows wont start, its stuck in "smart mobility"
i tryed to flash original rom's bot that didint work....
so prolem is how do i get windows back to work?
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
Click to expand...
Click to collapse
You say you are flashing the original ROM. You mean the original HTC Windows Mobile 6.1 ROM? I understand you can only get this done only from HTC authorized centers.
(800) stedntf
chan.sk said:
You say you are flashing the original ROM. You mean the original HTC Windows Mobile 6.1 ROM? I understand you can only get this done only from HTC authorized centers.
Click to expand...
Click to collapse
I have
This
RUU_BlackStone_HTC_FIN_1.14.414.2_Radio_52.49a.25.26_1.09.25.14_Ship
And this.
RUU_BlackStone_HTC_FIN_1.56.414.0_Radio_52.62.25.34_1.13.25.24_Ship
Blackstone/HD Links | Guides | Stickies | Roms | Read before posting
http://forum.xda-developers.com/showthread.php?t=999925
U have to install HTC USB Sync Drivers drivers
Put the phone into bootloader by pressing volume down + power button
plug the usb cable to the computer/laptop
and then run the shipped rom executable file... when the tricolor screen displays USB at the bottom.
else extract the RUU_signed.nbh or any file with .nbh extension from the shipped file with zip viewers like 7-zip
rename the file to BLACIMG.nbh
Put into the root of memory card
put the phone into bootloader and follow the screen instructions..
And the most important thing... search the forum.. before posting..
Hope this works for you
Hi there! I think that you can't reflash even a Original ROM without unlock the phone with new Hard-SPL from Olinex ,considering that you have tried a Hard Reset and nothing happened ,your last option is to unlock the phone and reflash the ship ROM ,or to flash a custom ROM ( is not a good solution if you still have warranty,but still you cand revert your stock SPL:good so ,you have nothing else to lose , all is left for you is to try what i said before . If you don't know how to do it,let me know and i will post the exact links to instructions.
Hi all,
You can try a NAND ROM like the new release of Fagyi. There is an easy step by step manual to installation. You will lose winmo, but you will have a real android.
It looks pretty and he has solved many of the issues of previous versions.
Regards
CristianCRS said:
Hi there! I think that you can't reflash even a Original ROM without unlock the phone with new Hard-SPL from Olinex ,considering that you have tried a Hard Reset and nothing happened ,your last option is to unlock the phone and reflash the ship ROM ,or to flash a custom ROM ( is not a good solution if you still have warranty,but still you cand revert your stock SPL:good so ,you have nothing else to lose , all is left for you is to try what i said before . If you don't know how to do it,let me know and i will post the exact links to instructions.
Click to expand...
Click to collapse
well, maybe i will try to unlock, i looked some instruction, aaand didint understood
So if there is quide to dummiest dummies, so i think that would help me!
But thx to all answers!
Do a Search and read the posts
masentava said:
well, maybe i will try to unlock, i looked some instruction, aaand didint understood
So if there is quide to dummiest dummies, so i think that would help me!
But thx to all answers!
Click to expand...
Click to collapse
You need to understand what you are going to do or you may end up with a phone that does not work anymore.
Do a search of the forum and read the posts. There are so many.
http://forum.xda-developers.com/sitesearch.php?q=unlock blackstone