So I found the weather database in \Windows\ and was trying to edit it to add my city but it seems that it's stored on the ROM part and I can't seem to rename it so I can put my new edited copy in. Could anyone advise me on how to do this? Or is there a new version of the Weather Database Editor that was used for other HTC's? Thanks :]
Use Totalcommander and uncheck the attributes, then replace en recheck the attributes
What are the files that can be edited?
Total Commander couldn't seem to do either but I found an entry in the registry that I could change instead. Unfortunately it's still the "loccode" so it still doesn't have a city near me. I would love a weather panel alternative that is exactly like the htc one but would support zip codes. I tried chome weather but it was so buggy for getting it to show up on the home screen.
As for the files I was trying to edit, they were xml files in \Windows\ and began with HH. I don't have my phone with me at the moment so I can't get the full name.
djh816 said:
Total Commander couldn't seem to do either but I found an entry in the registry that I could change instead. Unfortunately it's still the "loccode" so it still doesn't have a city near me. I would love a weather panel alternative that is exactly like the htc one but would support zip codes. I tried chome weather but it was so buggy for getting it to show up on the home screen.
As for the files I was trying to edit, they were xml files in \Windows\ and began with HH. I don't have my phone with me at the moment so I can't get the full name.
Click to expand...
Click to collapse
Thats how I edited mine. via the registry. I was wondering what file you were trying if it would be easier to modify then just going into the registry and editing the three entires. I will stick to the reg edits, its faster... but thanks.
Bupahs said:
Thats how I edited mine. via the registry. I was wondering what file you were trying if it would be easier to modify then just going into the registry and editing the three entires. I will stick to the reg edits, its faster... but thanks.
Click to expand...
Click to collapse
Can you post something on how to change this, i'd like to add my Area Code to the Weather...
Thanks,
Black_V!per said:
Can you post something on how to change this, i'd like to add my Area Code to the Weather...
Thanks,
Click to expand...
Click to collapse
I edited:
HKLM\\Software\HTC\HTCHome\Weather\Settings\Location
HKLM\\Software\HTC\HTCHome\Weather\Settings\LocationCode
Just change the city information there with what you want. After you save the edits go back to your Weather Panel and it will say its updating.. Mine error on the first attempt (said it could not download data) but I tried it again and it worked. The city MUST be in the online database or it wont work at all, my first city attempt would not update, my second choice did. I wanted Millersville, PA but its not listed.. but Lancaster, Pa was listed online (the 'more online link' in the Weather application.
You need to go to http://www.accuweather.com/ to get your location code
Bupahs said:
I edited:
HKLM\\Software\HTC\HTCHome\Weather\Settings\Location
HKLM\\Software\HTC\HTCHome\Weather\Settings\LocationCode
Just change the city information there with what you want. After you save the edits go back to your Weather Panel and it will say its updating.. Mine error on the first attempt (said it could not download data) but I tried it again and it worked. The city MUST be in the online database or it wont work at all, my first city attempt would not update, my second choice did. I wanted Millersville, PA but its not listed.. but Lancaster, Pa was listed online (the 'more online link' in the Weather application.
You need to go to http://www.accuweather.com/ to get your location code
Click to expand...
Click to collapse
dude, thx so much, i tried editing the HH files and couldnt get my city on it, but got it in 1 try this time
Bupahs said:
I edited:
HKLM\\Software\HTC\HTCHome\Weather\Settings\Location
HKLM\\Software\HTC\HTCHome\Weather\Settings\LocationCode
Just change the city information there with what you want. After you save the edits go back to your Weather Panel and it will say its updating.. Mine error on the first attempt (said it could not download data) but I tried it again and it worked. The city MUST be in the online database or it wont work at all, my first city attempt would not update, my second choice did. I wanted Millersville, PA but its not listed.. but Lancaster, Pa was listed online (the 'more online link' in the Weather application.
You need to go to http://www.accuweather.com/ to get your location code
Click to expand...
Click to collapse
I did this and noticed it still reports on my closest city that was on the phones DB (PhoenixAZ) i noticed there is a string "CityIndex" with a 4-digit value, im trying to locate my City on the website, but i have a feeling that its not located there... *Kingman, AZ*
When changing City's the 4-digit value changes as well..
Black_V!per said:
I did this and noticed it still reports on my closest city that was on the phones DB (PhoenixAZ) i noticed there is a string "CityIndex" with a 4-digit value, im trying to locate my City on the website, but i have a feeling that its not located there... *Kingman, AZ*
When changing City's the 4-digit value changes as well..
Click to expand...
Click to collapse
The list of available cities is very small. http://www.accuweather.com/world-city-list.asp In the registry, there is also a city name that you can enter the new name for it as well. Just make sure you only make regeddits because thats all these are. the moment you go back into the program and pick a city, your changes get reverted. As for the cityindex, i think thats just the local index in the database of cities.
djh816 said:
The list of available cities is very small. http://www.accuweather.com/world-city-list.asp In the registry, there is also a city name that you can enter the new name for it as well. Just make sure you only make regeddits because thats all these are. the moment you go back into the program and pick a city, your changes get reverted. As for the cityindex, i think thats just the local index in the database of cities.
Click to expand...
Click to collapse
I found it on Accuweather, its NAM|US|AZ|KINGMAN "Kingman, AZ, US" the only problem is it reports as the last local city thats on the phones DB.
ie if it was on Las Vegas it says "Kingman" but reports the weather for Las Vegas... I have a feeling your correct with the CityIndex being a local lookup, but i feel that that Index is where it holds the records to download the info from Accuweather.com
Where can we find this Index?
Edit:
Wait, i went to the Accuweather site from the Weather App on the phone and it reports the same temps/etc, but on my desktop its completely different... Dont know which to trust (10 degree difference)
I am trying to find a better way to get this done. I wrote a mortscript that lets you input the info (city, location codes) and writes it to the registry and it seems to work so far... the only issue I am having it upon reboot it reverts back to the old information that was selected via the weather program?? not sure why as the reg edits shouldnt change. I will post a working script once I figure this out.
And just an update, when editing the Registry you need to also change the CityIndex line, the cityindex can be found on accuweather.com, it is the string of numbers right after the city codes:
/us/pa/harrisburg/17101 <----
it is not always the zip code. My location lanc is zip code 17603 but the cityindex code is 17454 or 17573 (17573 worked for me)
You will know thats it is working if you then select More Online and the accuweather page loads in PIE with your city
@ Bupahs
I had that too, reverting back and then it can't download for my location
I live in the Netherlands and i can't see the cityindex numbers, this is my link in accuweather:
http://www.accuweather.com/world-in...ather&locCode=EUR|NL|NL008|HEERHUGOWAARD|&u=1
so got any ideas?
JcNeji said:
@ Bupahs
I had that too, reverting back and then it can't download for my location
I live in the Netherlands and i can't see the cityindex numbers, this is my link in accuweather:
http://www.accuweather.com/world-in...ather&locCode=EUR|NL|NL008|HEERHUGOWAARD|&u=1
so got any ideas?
Click to expand...
Click to collapse
the Weather Station in Heerhugowaard says the code is 2207 (its the same for Heerhugowaard, Oterleek, Veenhuizen)
Got it!!
That elusive CityIndex is none other than the +4 on your zip code. Lancaster, Pa is 17603-1599 the 1599 is the CityIndex. For example Harrisburg, Pa is listed in the HTC Weather applications list and when I go into the registry the CityIndex is 3265: the State Capitol is
State Capitol
Room 129, Main Capitol Building
Harrisburg, PA 17120-3265
So far successive reboots have not reverted back to old settings, and updates come through perfectly fine. So now all I need to do is edit my Mortscript to use the plus four zip and it should hold as well. But for now, find your +4 in your Zip and try the edits:
HKLM\\Software\HTC\HTCHome\Weather\Settings\Location
HKLM\\Software\HTC\HTCHome\Weather\Settings\LocationCode
HKLM\\Software\HTC\HTCHome\Weather\Settings\CityIndex
I used your method and i does still work after reboots, but where it says "last tupdated" always remains the same, and if i manually update all it does is update the time it says "last updated" ( so by example it is static at 22 minutes ago, then i update and it turns into 45mins ago..)
It also doesnt seem to auto update.
I ended up downloading NRG Weather 3.0, NRG Mini Weather, and Mini Weather 1.4.
Im using NRG Mini Weather atm. HTC Default Sliding panel is kinda dodgy with non-default locations.
Actually, the CityIndex is index # or (row #, start from 0) of your city name in the "HH_0409_WeatherCities.txt" file. You can test this by moving the index of your city to the top of the list which will give your city a 0 for CityIndex value.
Bupahs said:
Got it!!
That elusive CityIndex is none other than the +4 on your zip code. Lancaster, Pa is 17603-1599 the 1599 is the CityIndex. For example Harrisburg, Pa is listed in the HTC Weather applications list and when I go into the registry the CityIndex is 3265: the State Capitol is
State Capitol
Room 129, Main Capitol Building
Harrisburg, PA 17120-3265
So far successive reboots have not reverted back to old settings, and updates come through perfectly fine. So now all I need to do is edit my Mortscript to use the plus four zip and it should hold as well. But for now, find your +4 in your Zip and try the edits:
HKLM\\Software\HTC\HTCHome\Weather\Settings\Location
HKLM\\Software\HTC\HTCHome\Weather\Settings\LocationCode
HKLM\\Software\HTC\HTCHome\Weather\Settings\CityIndex
Click to expand...
Click to collapse
Bupahs said:
I edited:
HKLM\\Software\HTC\HTCHome\Weather\Settings\Location
HKLM\\Software\HTC\HTCHome\Weather\Settings\LocationCode
Just change the city information there with what you want. After you save the edits go back to your Weather Panel and it will say its updating.. Mine error on the first attempt (said it could not download data) but I tried it again and it worked. The city MUST be in the online database or it wont work at all, my first city attempt would not update, my second choice did. I wanted Millersville, PA but its not listed.. but Lancaster, Pa was listed online (the 'more online link' in the Weather application.
You need to go to http://www.accuweather.com/ to get your location code
Click to expand...
Click to collapse
Thanks so much dude.
Works like a charm
Related
Has anyone figured out how to change the weather location reported in the HTC plugin. I live in an area not listed in the initial setup (Sacramento, CA) and I found a few registry entries to change, but it did not seem to change the display. In fact, I think I might have broke it!!
I somehow got it to work the second time i tried it. I first reset it back using the interface, then edited the registry and added my city. Works great.
Could you explain exactly the modification ?
Thanks.
You can find the registry entry here...
HKEY_LOCAL_MACHINE
Software
HTC
HTCHome
Weather
Settings
You need to change the Location name and Location Code keys to match the format found on Accuweather.com for your City.
Press OK and save changes.
Backup your Registry first just incase.
DO IT AT YOUR OWN RISK
is it possible to "REPROGRAM" the "weather icon" on the htc today screen ??? i would like to launch another program instead...thank you
format
<city name="Tampa, US" locationcode="NAM|US|FL|TAMPA|33601"/>
best i can tell the above is the correct syntax for getting cities in the list but aside from the above city and a couple of MAJOR cities i cannot get this to work on any smaller cities or towns. anyone come up with anything else?
It wont work for me either :0( - after the change it wont download?
If it's possible, anyone could do a tutorial for the weather change screen ?
Sorry for my bad english....
Many thanks.
Works a treat, thanks
Well, it works like a charm for me. Happy to see that you can actually change the city name too (mine is now Amersfoort, without the NL).
[email protected]
Not all the locations ( supported by the service ) work with the HTC server side plugin
Poor engineering
pchronos said:
Not all the locations ( supported by the service ) work with the HTC server side plugin
Click to expand...
Click to collapse
If this is true, HTC deserve one serious slap around their wrists...
I'm unable to change my weather city to Holiday, FL 34691 myself...tried a couple different variations, but it's just not holding.
So, I'm wondering...there are a FEW bigger US cities not included in this AccuWeather plugin app that HTC is using - when the phones are officialy released in N. America in the (hopefully) near future, will these cities be added as supported options? I mean, no Denver? Tampa?...but St. Petersburg...!?!?
mgm1979 said:
I'm unable to change my weather city to Holiday, FL 34691 myself...tried a couple different variations, but it's just not holding.
So, I'm wondering...there are a FEW bigger US cities not included in this AccuWeather plugin app that HTC is using - when the phones are officialy released in N. America in the (hopefully) near future, will these cities be added as supported options? I mean, no Denver? Tampa?...but St. Petersburg...!?!?
Click to expand...
Click to collapse
Denver works fine for me. I was upset I couldn't get more specific and use Boulder or Superior though.
LPChris said:
Denver works fine for me. I was upset I couldn't get more specific and use Boulder or Superior though.
Click to expand...
Click to collapse
oh, I didn't try adding Denver, I was just looking at the included list of cities.
Could someone point me in the right direction for changing the weather - i cannot find the file on my touch to change the details. I followed the lead posted earlier but can't for the life of me find the appropraite file to change.
Changing Weather city
Hi all
Quite simple to change the defined weather cities. Just download a registry editor like Mobile Registry Editor (http://www.breaksoft.com/Download/MRE/MobileRegistryEditor.zip) which allows you to edit the registry from your PC using ActiveSync. Then go to
HKEY_LOCAL_MACHINE\Software\HTC\HTCHome\Weather\Settings
And change the Keys Location and LoctionCode to the new city. To know the city code find it on http://www.accuweather.com/.
Cheers
you could always move to a city that is listed, this would resolve the problem....
Hi Everybody;
Does Anyone can tell me what is the code for the city Namur in Belgium ?
I searched on accuweather.com, the city is listed but I dont know where to go to retrieve this code...
jool0212 said:
Hi Everybody;Does Anyone can tell me what is the code for the city Namur in Belgium ?
Click to expand...
Click to collapse
EUR|BE|BE008|NAMUR
I've tried a couple of weather database editors but they all just crash the new version of Manila, is anyone working on an editor that works for this version, or does someone know of one that does work that I missed ?
Much appreciation for any help or suggestions.
PS: I realize it's not "out" yet, but I'm trying out a ROM with it cooked in (EnergyROM 2.0 031109).
HyoImowano said:
I've tried a couple of weather database editors but they all just crash the new version of Manila, is anyone working on an editor that works for this version, or does someone know of one that does work that I missed ?
Much appreciation for any help or suggestions.
PS: I realize it's not "out" yet, but I'm trying out a ROM with it cooked in (EnergyROM 2.0 031109).
Click to expand...
Click to collapse
This is from Slawcop, all credit goes to him.
I tried this method, and it added the city to the DB but it would not update the weather for it. I verified my Accuweather code was correct as well.
For weather with this ROM....I have not found a weather database that works. The ones out there are causing the touchflo to continually restart and a HR is needed...I have installed my custom town on everyone of the Energy Rom's by following these instructions. I know it works....I have personally done it for some of my friends and there cities...
Go into settings and disable touflo3d.
Browse to the 2330fc3c_manila file in windows. Once you find it place a copy of it on your desk top. Then right click on the manila, click properties and turn off read only.
You then need to download sql-Editor http://sqliteadmin.orbmu2k.de/
Open the file and run the exe.
Click on databases, open, then go to your desktop where you saved the manila, find it and load it (you might have to click all files on file type to find it).
Once it loads you will see it loaded and a tree menu in the left column. You should notice Cities is expandable, so click the + sign and you see ID and under it you see city name click on it.
Once you click on it then over to the right you should see three tabs SQL Query/Result/ and Edit Data. You want Edit Data click it. If you dont see the chart of cities, states and countries then double click again on city name.
Now the easiest way I did it was find a city in my state or close to the same as mine and edit the information. For instance in number 1823 I inserted my city by editing it. You have to edit the cityname, state, Country, and then under accuweather code you have to make sure they all match EXACTY...capital letters...spaces etc...Also make sure the timezone matches your area. That is why it is important to find a large town close to the town you are trying to add and use the correct information.
You double click on city and a edit memo will appear with the city name edit it exactly. then move onto the next one and so on.
Once you have edited all categories that need it, which if you did like I said would only be the city name in lower case, and city name in upper case.
Once done close SQlite.
Go back to the manila on the desk top right click on check it back to read only.
Now using total commander or other registry editor install the manila file back to the windows folder. Then return back to setting and reactivate touchflo3 and your done. Go into the city and add your city...should be it...
Bruce Inman said:
This is from Slawcop, all credit goes to him.
I tried this method, and it added the city to the DB but it would not update the weather for it. I verified my Accuweather code was correct as well.
For weather with this ROM....I have not found a weather database that works. The ones out there are causing the touchflo to continually restart and a HR is needed...I have installed my custom town on everyone of the Energy Rom's by following these instructions. I know it works....I have personally done it for some of my friends and there cities...
Go into settings and disable touflo3d.
Browse to the 2330fc3c_manila file in windows. Once you find it place a copy of it on your desk top. Then right click on the manila, click properties and turn off read only.
You then need to download sql-Editor http://sqliteadmin.orbmu2k.de/
Open the file and run the exe.
Click on databases, open, then go to your desktop where you saved the manila, find it and load it (you might have to click all files on file type to find it).
Once it loads you will see it loaded and a tree menu in the left column. You should notice Cities is expandable, so click the + sign and you see ID and under it you see city name click on it.
Once you click on it then over to the right you should see three tabs SQL Query/Result/ and Edit Data. You want Edit Data click it. If you dont see the chart of cities, states and countries then double click again on city name.
Now the easiest way I did it was find a city in my state or close to the same as mine and edit the information. For instance in number 1823 I inserted my city by editing it. You have to edit the cityname, state, Country, and then under accuweather code you have to make sure they all match EXACTY...capital letters...spaces etc...Also make sure the timezone matches your area. That is why it is important to find a large town close to the town you are trying to add and use the correct information.
You double click on city and a edit memo will appear with the city name edit it exactly. then move onto the next one and so on.
Once you have edited all categories that need it, which if you did like I said would only be the city name in lower case, and city name in upper case.
Once done close SQlite.
Go back to the manila on the desk top right click on check it back to read only.
Now using total commander or other registry editor install the manila file back to the windows folder. Then return back to setting and reactivate touchflo3 and your done. Go into the city and add your city...should be it...
Click to expand...
Click to collapse
a big thank you
works a charm
this didn't work out for me does someone have the original 2330fc3c_manila from Rhodium for me? now the tab keeps crashing..
willyy1991 said:
this didn't work out for me does someone have the original 2330fc3c_manila from Rhodium for me? now the tab keeps crashing..
Click to expand...
Click to collapse
Hi,
use 2330fc3c_manila from Rhodium-Thread Post #4 .. .this will work
It does not work for me too. It says "No weather data available". Whereas with the same accuweather code I was having no problem with Diamond weather. Where can I be wrong?
EDIT:
It worked after I added the registry
[HKEY_CURRENT_USER\Software\HTC\Manila]
"Weather.ServerURLOverride"="http://weather.not2advanced.com/htcweather/forecastdata.php?ac=XDADevs&locCode=%25ls&version= 1&device=innovation"
Search for Weather Master. That is now fixed som it also works with rhodium!!
Thanks a lot, works for me on ROMeOS with Rhodium
Hi is there a better weather that can run from the touch flo buttons. With the default one i cant get a town near to me the nearest is 10 miles away, so the weather is out.
Thanks
as a newb to WM i had tha same problem, but after a few questions on here and some help from
Hamz22 and jamie walsh i got it sorted, big thanks to them and i hope this helps other newbs like me
so for all those newbs here is how you change the weather location to places not listed in the default program on the TP2
1.Download and instal total commander http://ghisler.fileburst.com/ce/tcmdpocketarm.cab
, also instal net framework 3.5
2.once installed open TC up and look in the phones windows directroy for this file 2330fc3c_manila
3. when you find it using TC copy it to the stoagr card on your phone
a box will come up and the location wiil be \\windows**, to save it stoagecard change the location to \Storage card and then click copy
4. still in TC go to the storage card and find the file , open the file details in TC its the right hand side button on the top row of commands, and uncheck the read only box
5.now using TC copy this file back to its original windows directory on the phone.
6. download the weather location app and install on the phone version 1.20 is needed
http://forum.xda-developers.com/attachment.php?attachmentid=120460&d=1223638121
using this you can now add towns and cities
to get the Accu view weather location for your area if in the uk go here
http://www.accuweather.com/world-in...ather&traveler=0&loccode=EUR|UK|UK108|Chorley
as you can see this location is for chorley so the accu code for that is EUR|UK|UK108|Chorley
once you have added a new town etc you need to do a soft reset for to be able to use it
just to add heres some fun codes to add
Death valley 92328(for america it uses the zip code)
south pole ANT|AQ|AQ---|SOUTH+POLE
cool cheers I found this but could not find the xml file so hopefully will be bale to use your method
http://forum.xda-developers.com/showthread.php?t=368282&page=11
i get an error telling me i need a newer version of the .net framework.
sorry you need to have 3.5 net framework installed a search on here will find it
Cheers . Got it too work . Impressed i actucally found my village on the place list in accuweather.
just confirming this worked like a charm
Sorry guys didn't work for me... 1.2 is saying "file write protection of database couldn't removed"... tried 1.1 modified.... but touch flo restarts every time... i click on it( i checked that read only is unchecked in windows folder for that file...
OK...I figured it out... some of the steps..are other way around for me...somehow...
1) before installing Weather Editor 1.2 - go to windows folder find the file "2330fc3c_manila" - I used Resco explorer 7.05 to go to properties of file to uncheck "read only" (note that if u press once the check wont disappear..it will become transparent - double click makes it disappear completely) - then confirm changes to the system by pressing yes in the appeared window....
2) install weather editor 1.2, launch it go to find the country u need.... press edit to click cities...and add your city with accu code
3) restart your phone
4) go to weather pad in touch flo and add your city
work for me...however u can't delete the weather editor after it... it deletes the file and substitutes it with original one...
now another problem: clock... I found my city there... and now it confuses the time zone... London time should be the same with Durham... but it says its different...that is why it causes other clock to be different if u just simply change it to real time... is there any way to force it to correctly identify time zone?
mallman said:
just confirming this worked like a charm
Click to expand...
Click to collapse
here also! nice work
RMU said:
here also! nice work
Click to expand...
Click to collapse
Sweet, awesomeness weather app, now in a town near me! w00t. Cheers for the info dude.
Just confirming that it worked for me also.
Thanks-a-mil - great work.
It works fine for the weather tab, but unfortunately if I set my location in the clock to to the same place it is 13 hours behind!
I've checked the entry from accuweather which is EUR|UK|UK199|Redcar and it all seems fine
Very confusing
same problem for me - I reportede it in several threads - no reply yet
Brilliant! Thank you! My local time is set right but everywhere else in the UK is 13 hours ahead! Oh well! At least I know what time it is where I am.
I edited on PC 2330fc3c_manila.dll file from Windows folder on PPC, edited it with SQLite Administrator
HTML:
http://sqliteadmin.orbmu2k.de/
just check last fields (timezone and msid) in cities section for your town and copy them from nearest one to your town (geographically)
xGuess said:
I edited on PC 2330fc3c_manila.dll file from Windows folder on PPC, edited it with SQLite Administrator
HTML:
http://sqliteadmin.orbmu2k.de/
just check last fields (timezone and msid) in cities section for your town and copy them from nearest one to your town (geographically)
Click to expand...
Click to collapse
Excellent, worked like a charm!
Thanks xGuess, now I don't have to pretend that I come from Newcastle!
I'm sorry! I don't understand? Wasn't bothering me until the computer started changing the time. Ment I missed all my appointments! Please could you say again how you correct the time? Thanks!
Two posts up ^^^ Wot he said!
Did it! Thanks! Took me ages to open the table! Then even longer to realise I had to copy it to my computer rather than editing it from the storage card. Oh well, it's done now! Thanks for your help! Is excellent!
Yesterday I tried to add a new city from the weather-tab, but there where no city to choos from. I could just choose to search, or i thought I could, but when I enterd the city in the search-form, nothing mor than a warning signal sounden when I pressed the return-key on the keayboard, there where no searchbutton (I dont know I it suppoused to be). I have the same issue with the world clock.
I have winmo6.5 stock rom. I have also been using TD2 Tools, Topaz Tweeks and s2us.
Can it be any regestry key that is wrong or somthing else?
/Christian
jassmannen said:
Yesterday I tried to add a new city from the weather-tab, but there where no city to choos from. I could just choose to search, or i thought I could, but when I enterd the city in the search-form, nothing mor than a warning signal sounden when I pressed the return-key on the keayboard, there where no searchbutton (I dont know I it suppoused to be). I have the same issue with the world clock.
I have winmo6.5 stock rom. I have also been using TD2 Tools, Topaz Tweeks and s2us.
Can it be any regestry key that is wrong or somthing else?
/Christian
Click to expand...
Click to collapse
Many things can cause this.
some simple things to check are;
1. Does your SIP add a space after a word? This will cause it not to find a city. Simply hit backspace after city typed will bring up the list.
2. Sometimes your initial connection has to be through WiFi to get the city DB to update.
3. Depending on your location, there are some fixes out there for example Search Conflippers North America Weather v5, this updates the DB with most US Cities and zips.
Sorry I can't be more specific but your information is lacking, i.e., your location and carrier.
It have worked when I installed the 6.5, but no there seems to bee no cities. Is there a way to update the city database? It looks like the DB is empty.
jassmannen said:
It have worked when I installed the 6.5, but no there seems to bee no cities. Is there a way to update the city database? It looks like the DB is empty.
Click to expand...
Click to collapse
1. the SIP issue will cause the DB to appear empty.
3. You can search for fixes specific to your area. I only know of the North America fix.
Interesting. Now I got answers when I search on the add city-page.
how to add small cities in weather
i just got my htc pure from at&t . I was able to add big cities but i could not find kingsville,tx from the list how to add the city manually please help
dinakar407 said:
i just got my htc pure from at&t . I was able to add big cities but i could not find kingsville,tx from the list how to add the city manually please help
Click to expand...
Click to collapse
Install these 2 cabs to your device.
Warning; the DB is very slow so give it time to load after you type your city.
Kingsville is in there.
THanks Bruce
I can now add small cities In USA
Each state(US) is treated as a country and the country of united states is removed. Good Idea
Hi! I want to add town in list-weather. But i can`t find file locate 2330fc3c_manila. Where is locate 2330fc3c_manila. This file contained of towns list. Thanks.
its in windows if you search weather app in the touch pro 2 forum you will find how to add any city, the file doesnt contain the towns list it will however when modified allow you install the weather database editor to addd your town
http://forum.xda-developers.com/showthread.php?t=523698
all the info you need
I have new HTC Touch2 MEGA, when i go to Weather and try to find my town after typing Bulgaria, it doesnt find it. I went to accuweather site and took the code for it, but dont see where to put the code.
Before i had an HTc Touch 3g with cooked ROM, where there was an option Manual Code Input or something, but here on Touch 2 i dont know how to put the code. Help me please.
combat goofwing said:
all the info you need
Click to expand...
Click to collapse
2.once installed open TC up and look in the phones windows directroy for this file 2330fc3c_manila
Click to expand...
Click to collapse
In 1 post I said - i can not find file 2330fc3c_manila in folder windows!
I used Resco Explorer and TC.
Also, I was searching through all folders.
Maybe file has a different name??
My device HTC Touch2.
THNKS
I found this file - HH_0419_WeatherCities.xml . It contained list of towns. BUT, if you uptdate weather it show "no data"("данные недоступны" (RUS))
I tried a few programs called Weather Database Editor, i can open them, and can change cities, but after i go to Weather tab - no changes at all
mirost1 said:
I tried a few programs called Weather Database Editor, i can open them, and can change cities, but after i go to Weather tab - no changes at all
Click to expand...
Click to collapse
once you add cities do a soft reset for them to appear
combat goofwing said:
once you add cities do a soft reset for them to appear
Click to expand...
Click to collapse
I dont remember well but i think i did. I think the problem is that whatever program you use, until the weather file is read only you can not make any changes, but i dont know where is this file with the list of cities so i can uncheck Read Only and make changes, what is its name in Mega?
So, i found the file, removed "read only", put my sity in, and when i go to Update Now it says it can not update for selected city