Database Users

WiFi data transfer problem

I have a ZyXEL P-2602HW-D1A Wireless router. I have tried all combinations of security, even NO SECURITY WHATSOEVER, and still the device won't transfer data.
Not working;
Firmware: 1.5, Build: CR817
Wifi Router: ZyXEL P-2602HW-D1A
Security: Tried All; WPA2, WPA, WEP & None.
Problem: Connect under all conditions but no data is sent
Please help.

Have you tried another WiFi access point to check the devices WiFi module actually functions?

No, I haven't tried that yet, but don't really see the point... I've connected effortlessly to the same WiFi network with my HTC Touch Diamond.
jbelman said:
Have you tried another WiFi access point to check the devices WiFi module actually functions?
Click to expand...
Click to collapse

For some reason my N800 wouldn't connect to MY ZyXEL P-2602HW-D1A unless I set the device (N800) to disable any kind of wifi powersaving features it had.
On another note, how did you get your hands on the device so early? I'm guessing you are using a Cybercity internet connection? (I'm in copenhagen myself)
edit: I actually came to that solution when i noticed I could connect to OTHER accespoints, but not the Zyxel ones.

Same problem here in France with a Freebox as router

I've noticed under the router's WLAN client list that the device does not have a "Host Name". Would that present a problem?
It is assigned an IP address by the router without any problems, though.
Also the device seems to lose connection and reconnect constantly (every 5-10 seconds).
I done some digging around in the router settings and found an "AnyIP" feature. Would that possibly help?

There are a number of issues floating around. Support for WPA2 seems iffy and some people can just change to WPA or WEP and all work fine.
There are however a number of people (such as me) who can get a connection perfectly, it shows connection OK, they get an IP from the DHCP server etc, they can even browse a page for a few seconds... but after that no data is sent and everything times out. This is happening on any security from none through to WPA2.
I have seen no solution to this anywhere and believe me I have looked. Some people have given up and got a new router, but this is not a solution.
Can someone confirm that this has been recognised as a fault with the magic and is being investigated, rather then assuming it's a user or router error. There are far too many instances of this across many brands of router for it not to be an issue with the HTC Magic.

zyborg said:
No, I haven't tried that yet, but don't really see the point... I've connected effortlessly to the same WiFi network with my HTC Touch Diamond.
Click to expand...
Click to collapse
What I mean is have you tested the device on ANY other AP except the ZyXEL?

No, but since I'm by far the only one having this issue (try searching the web; see my last post), I didn't feel it was necessary. Just want some input from xda-dev that might solve the problem, if any.
jbelman said:
What I mean is have you tested the device on ANY other AP except the ZyXEL?
Click to expand...
Click to collapse

I've had exactly the same problem earlier with the N800 on the zyxel. Exactly how you describe it.
Did you find out if you could turn off any powersaving features on the HTC?

same problem here
in france with a freebox
I don't exaclty know what router is in the box
but I have excalty the same
I set on never the wifi sleep(powersaving) mode.
i found it in setting wifi menu button then advanced and "never"
but the problem is still here

zyborg said:
There are however a number of people (such as me) who can get a connection perfectly, it shows connection OK, they get an IP from the DHCP server etc, they can even browse a page for a few seconds... but after that no data is sent and everything times out. This is happening on any security from none through to WPA2.
Click to expand...
Click to collapse
I have the exact same problem on mine. I just hope it is not a hardware issue...

Could be DHCP lease time problem. Did anyone of you tried to set up Magic with Static IP?

Yes, I tried that also - didn't help one bit.
TheRookie said:
Could be DHCP lease time problem. Did anyone of you tried to set up Magic with Static IP?
Click to expand...
Click to collapse

I also have this problem. Im in Denmark with a Zyxel P660HW-p1.

Another user of Cybercity in Denmark with the same problem.
ZyXEL P-660HW-D1
The android is the only device that doesn't work. I have tried with Iphone and laptops.
I've tried to change the settings on the router to no avail.
Enable 802.11g+ mode [on/off]
RTS/CTS Threshold [2432/4096]
RTS/CTS Threshold [2432/4096]
Max. Frame Burst [600/1800]
The device shows up in the device list with no hostname, the HTC Magic gets the right ip address (using the program WhatIsMyIp to view it)

I had the same problem before, when I set my TP-LINK draft N router with WEP security my HD can see it, connect to it (but speed was slow tho), and my HTC Magic just keep saying its not in range. However, when I set it to open security it works, so I recognise its probably the security setting... so I changed that to WPA2 and then it works.
In my case, I see different device have different tolerance to some settings (in my case, draft N + WEP is OK with laptop, HTC HD, but not Magic), so its still worthwhile to try a few different settings, and try a public wireless access point also to double confirm?

Power save?
I have Zyxel (P-2602R-D1A) router.
I had exactly the same problem with my HTC Vox (winmo)... but that was solved by boosting the WiFi in the phone.
WiFi -> Best performance
So Im guessing magic is in some WiFi "power save" mode...
I dont know how this works, but I thought maybe you could change some WiFi settings behind the hood - that is if the hardware is capable of it.

Zyxel (P-2602R-D1A) router
I am having the same issue with this router as the other posters. The phone connects perfectly and reports an excellent signal, but barely sends or receives any data. I have used a terminal emulator to ping the router and it reports an 82% packet loss. This must be a big problem for many Danish users as it is the standard wifi router provided by two of the major ISP's.

same issue here with my vodafone uk magic.
wifi connects and i can browse for a few seconds then get a connection error and can't browse until i re-start wifi on the magic...
i've actually given up using wifi at home now due to this.
router is a talktalk supplied Huawei Echolife HG520b using 128 bit WEP
i can connect fine via wifi at the office so i don't think it's an issue with the handset, just with certain routers or router configs...
this issue has been reported on the vodafone uk forums but as yet no solution.
http://forum.vodafone.co.uk/index.php?showtopic=31937

HD2 WiFi problem **HELP**

Please help, ive had my hd2 for a few days now and have had nothing but problems, might just give it back!
It picks up my home router but simplify wont connect, it just displays a small rotating circle likes it working but nothings happening.
When i remove the settings and retype the key code it keeps saying incorrect code but it isnt,
Anyone any ideas, can i some how reset the wifi settings, its taken me a few days to customize the phone so i dont really want to do a hardwear reset. Ive already a software restset.
Bloody htc!

What protocal are you using on your router? WPA, WEP?
Oh if your using an older Belkin router, I know of about 3-4 models that used to have trouble with WinMo, an update Router flash fixes it though.
Give us some more info on your router etc and Im sure we can help though

Sure your using the right password/key? if it says its wrongs it is probably wrong lol. Maybe try changing it to a more basic password as a test? like "password" and see if it can get connect.

knightrider66 said:
Please help, ive had my hd2 for a few days now and have had nothing but problems, might just give it back!
It picks up my home router but simplify wont connect, it just displays a small rotating circle likes it working but nothings happening.
When i remove the settings and retype the key code it keeps saying incorrect code but it isnt,
Anyone any ideas, can i some how reset the wifi settings, its taken me a few days to customize the phone so i dont really want to do a hardwear reset. Ive already a software restset.
Bloody htc!
Click to expand...
Click to collapse
Hi
Calm down. Give some information about your router and the type of security You use.
try these
1. Reset the router once
2. If you use MAc access list on the router then add your device's MAC to the list.
3. If you use N router then in the settings untick N mode protection.
Give more details about the third party software on the hd2 using radios (eg: tomtom, igo,gpstuner like these)
Good luck

HI guys thanks for helping out.
Obvious first - yes the key code is correct i use it on my laptop and iphone.
security mode says WAP-PSK/WPA2-PSK. Its a siemens ive been on the ip server addres and cant see any issues, im on my laptop using the wifi now and its working perfet.
Ive tried everything, changing passwords, settings both on the router and on the phone.
The hd2 is full of really stupid bugs!

Try to hardreset the PPC.
If it won't work, try to update your ROM to the latest available.
If it doesn't want to work, then try to connect to another WiFi without password and see the connection is successful.
If it works with an unprotected WiFi, try to connect to a different router but with protected WiFi.
If it works, then there is a problem with your router and I suggest to update your router's firmware.

funny wifi
the problem wit my hd2 is most of the time it shows wifi connected but i cant surf the internet and sometimes out of the blues it connects to the internet,cant figure out wats happening....

HI kholk, thanks for the help, ill work my way through it and hopefully get it sorted!

knightrider66 said:
HI kholk, thanks for the help, ill work my way through it and hopefully get it sorted!
Click to expand...
Click to collapse
Have you found the solution? I can help you my friend i had the same situation

I tried to connect yesterday my hd2 with my router. First it wasnt working aswell. Then i set the next things. Channel 9 (was auto), Encryption AES (was tkip and AES). Network mode is Mixed. Further have you installed Mac Filter? I installed this also. So if i have a connection thats it. I must fill in my macadres from my phone for i get fully connected.

Hi guys thanks all for you help call HTC UK support and their amazing advice was to do a full hard reset!
I really am having a lot of problems with this phone and i cant understand why their have been so many issues?!

Hi guys,
I have the same problem- HD2 shows it is connected, but no access to Internet(other- laptop, SE990 phone is connected and working OK)
For not to write about all, now situation is:
1. On router wrt54g2 temporary disabled wireless security, only mac filtering is on(laptop mac, SE mac, HD2 mac is allowed), router firmware is up to date
2.HD2 is like new after hard reset, no settings is done for connection to home network. HD2 wifi is on, looking for access points and connecting to only one available open network in my area- to my home network and shows it is connected but no access to Internet.
3. In router I can see all connected clients by mac. All 3(lap, SE, HD2) are connected. I use Network Magic software too but it is showing only my laptop and desktop are connected. SE is not connected according NM, but it is working OK.
P.S.
Do not know what else can help you in my problem(maybe some other router setting, but as other devices are connected without problems so maybe it is not important for now)
So only my HD2 can not access WWW
Can You guys help somehow please

I've got a similar problem with an HD2 over here. Wifi does switch on, but it just won't connect to my router. The cirkel that is supposed to show when connecting to a network doesn't show either. I'm using WPA2-AES security, and yes, i did use the proper network key. I haven't tried connecting to other networks/using an alternative encryption method because a lot of other devices will then have to be reconfigured and it's not my own place. My Touch HD and 2 laptop connect to the network without any problems. The only solution I came across until now is doing a hard reset, which I would rather not do... I'm using a stock dutch rom (V1.43). Is it possible that upgrading to the newer 1.48 will solve this problem?

Have you tried removing the wireless security password and trying again? Test to see if maybe you are indeed typing in the password wrong.
Also check your exception list on your router, it might be blocking any other devices coming in.

I have the same problem.. Get the spinning loading circle and thats it.. But if i turn my belkin wires g router running wpa2 off then straight back on again the phone connects fine. But if i then leave my house or disconnect from the network then try and reconnect it wont and have to do the same process again. Luckily im also running a speedtouch 585 modem router which the phone connects fine to.

hey maybe it takes only a WEP key and not WPA as most people have. this is certainly the case as mentioned in the Wifi router article below -
http://www.mobilityminded.com/5438/wi-fi-router-on-htc-hd2-application-overview

Again me
It seems that it is problem with my router. HD2 was able to connect to open wireless a.p. in my town and all sow to my friends router which is using WPA security. So my linksys is not compatible, or i will try some other settings on it, but as other router clients have no problems, i am loosing my hope to have my HD2 connected at home unless i change router. But then another problem- which router will be compatible with all my devices in prise range of 100$
And replying to blackheart2925 my friend is using wpa not wep, i do not know other settings on his router but it is not security problem.
One thing is strange for my HD2 shows it is connected, router shows mac of HD2 among connected clients, but only HD2 do not have access to internet

allann said:
Again me
It seems that it is problem with my router. HD2 was able to connect to open wireless a.p. in my town and all sow to my friends router which is using WPA security. So my linksys is not compatible, or i will try some other settings on it, but as other router clients have no problems, i am loosing my hope to have my HD2 connected at home unless i change router. But then another problem- which router will be compatible with all my devices in prise range of 100$
And replying to blackheart2925 my friend is using wpa not wep, i do not know other settings on his router but it is not security problem.
One thing is strange for my HD2 shows it is connected, router shows mac of HD2 among connected clients, but only HD2 do not have access to internet
Click to expand...
Click to collapse
how are you connected to internet is it router which dials to isp or you have made a broadband dial up on your desk top ...
if you have dial up shortcut on desktop then you can not use internet via hd then change setting in router
better way is hard reset router and then reconnect hopefully it will solve your issue ..........

commando0 said:
how are you connected to internet is it router which dials to isp or you have made a broadband dial up on your desk top ...
if you have dial up shortcut on desktop then you can not use internet via hd then change setting in router
better way is hard reset router and then reconnect hopefully it will solve your issue ..........
Click to expand...
Click to collapse
Router "dials" to my isp and share internet for all connected devices...
Yes, i am going to hard resset my router, but have not much hope i sucsess

PROB:
If your HD2 connects to router but you cannot enter any web site, do this:
SOLUTION:
enter your www router settings - wireless - access control - MAC Address Filtering Table ->>>>> add your HD2 MAC adress
enter your www router settings - firewall - access control ->>>>> add your HD2 MAC adress
so, you have to add your MAC adress of HD2 into router TWO TIMES into TWO PLACES!
I had the same problem and..... solved

Wifi router working for anyone?

I have a vodafone uk hd2 and have been really impressed with it as a product. I have not had any luck with the supplied wifi router software, I go through the minimal setup and press start and as far as the phone is concerned the router is up and running, the problem i have is that neither of my laptops can see the router.
Has anyone had any luck using it? Is it possible that vodafone have disabled it somehow?
Alternatively so i can manually add the router does anyone have the following details that would be setup automatically;
wep in use? is it 128 pass phrase or 40/128 key?
open system authentication or shared key?
im guessing the wep index would be 1?
Thanks

Search .. it was discussed 10 times already.

Thats as maybe but none of the several threads have a real answer as to why some people have it working and others dont. It also seems that the functionality can be effected by soft reset which isnt ideal at all. Also i havent been able to find any of the above original settings that i asked for in the threads hence the post.

Works for me
Hi,
works great for me - just have to make sure that you're not connected to WLAN with the HD2 when trying. Disabling WLAN, then starting WIFI-Router does the trick for me.
Good luck !

I am on vodafone and wifi router works perfectly for me. It worked when I had the stock 1.43 rom and it works with all the cooked roms I have used since.

i did notice it only works with 802.11g not with 802.11b devices like PSP or some other phones..

Is that really the case that it only works with 802.11g devices? Im fairly sure my netbook isnt new enough to have 802.11g and as such probably wont see the router. Has anyone found a way to get the router visible to 802.11b devices?

Wonder if u have enable the N band function . I think Wi fi router will not work properly when it is enable. I did numerous testing with my laptop and iphone . When n band is enable on HD2 , Iphone can surf net thru HD2 but not the laptop . When n band is disable , device can connect no problem ..... So , to get wifi router to work , just have to stick with g band until someone can solve the issue .

Just to add on my previous post , I tried using WMWIFIRouter , also come back to same result ....

pagoda123 said:
Wonder if u have enable the N band function . I think Wi fi router will not work properly when it is enable. I did numerous testing with my laptop and iphone . When n band is enable on HD2 , Iphone can surf net thru HD2 but not the laptop . When n band is disable , device can connect no problem ..... So , to get wifi router to work , just have to stick with g band until someone can solve the issue .
Click to expand...
Click to collapse
The N band doesn't work anyway on the HD2.. better turn it off.. just because there's a parameter in the registry doesn't mean it works..
I have a N router at home and while it looks like it's doing N and it states "auto" instead of 54mbs, it still connects to the narrow band channel on the router..

N Works
bel_z_bub said:
The N band doesn't work anyway on the HD2.. better turn it off.. just because there's a parameter in the registry doesn't mean it works..
I have a N router at home and while it looks like it's doing N and it states "auto" instead of 54mbs, it still connects to the narrow band channel on the router..
Click to expand...
Click to collapse
N Works. I have a Linksys WRT320N router that can operate on N only, and the phone connects fine (at regular 2,4 ghz, the new 5 ghz doesn't work). Didn't speedtest.
I tried the standard sharing prog and wmwifi router (different versions) and can only, with a lot of effort, get my laptop on the net through the BT of my HD2. I have the N tweak on. Also did the trying in range of the router.

Any chance it's the computer you are trying to connect with? Tried with my work computer, but couldn't because our Dells have computer to computer(adhoc) connections locked out for security. Does the wifi router function show up as adhoc or access point?

zSpinner said:
N Works. I have a Linksys WRT320N router that can operate on N only, and the phone connects fine (at regular 2,4 ghz, the new 5 ghz doesn't work). Didn't speedtest.
I tried the standard sharing prog and wmwifi router (different versions) and can only, with a lot of effort, get my laptop on the net through the BT of my HD2. I have the N tweak on. Also did the trying in range of the router.
Click to expand...
Click to collapse
ok, now try and get N speed with only one antenna...

Ok Ive got a similar problem with the wifi router and vodafone
everything works hunky dory wifi router turns on, computer connects all is good only when i try and access a website i get a http error 403 forbidden message as if voda have restricted access i have no idea how this would be possible though.
Ive tried many site same result and many browsers chrome, safari, ie, firefox and opera
same thing
the strange part is that tweetdeck and skype work while the browsers don't
HHMMM
anyone else experienced this problem

As I'm on O2 I was quite keen to flash a new ROM to get the wifi router working as they did the dirty on us by ripping it out of the 1.43 they shipped it with...suffice to say that I'm not overly impressed with it after the couple of trials I've made using 1.66 ROM as the speeds its capable of generally fall short of what you get if you simply connect it via usb and use data sharing..bear in mind that I've only tried it twice so far and as such I may refine my opinion with further trials in different locations but as I was hoping to avoid repeatedly connecting leads to the usb socket it's a bit of a blow sooner or later, wear and tear will be an issue to think about.

my findings
had a play with the router, just to see and initially thought it wasn't working.it connected, but wouldn't pass any data.
25 minutes of my best network technician skillz later still no joy... that is until I remembered the laptop has a fixed ip and default dns server address set. as soon as I set them to automatic, bingo, fully working.
did a speed test from the laptop (mobilespeedtest.com) and got just under 900kbit over 3g. winner!
The connection only shows as 802.11b, but that's fast enough for the 3g connection so no worries.
the only down side is that it's adhoc, so the wifes n95 doesn't see it..but then again thats possibly a blessing In disguise!
EDIT as mentioned by the poster below, I had three connections present, (wap.o2.co.uk, mobile.o2.co.uk and paymonthly.o2.co.uk) and the router wouldn't work on them all, though I forget now which it would and which it wouldn't.

I never tried with 1.43 O2 ROM, but after flashing to 1.66 stock rom I just tried this.
For some reason I have 3 internet connection options:
1) Pay monthly contract
2) o2 active
3) mobile web
My standard connection is "mobile web" so I tried this first, and my laptop couldnt see the HD2 as a WIFI router. I then tried the "pay monthly contract" option and it worked straight away.
Now under my Notifications screen under O2 3G UK, I have two connections running, and the download speeds running the same as my home broadband due to the HSPA connectivity available through the phone.
Anyway, I just thought I would share this with anyone it may help.

Wifi lan without internet?

Hey.. i was wondering if i can make the HDs wifi router to a local LAN ROUTER ONLY.
I will use the phone as a local router to a test environment. In that i mean that i will use the phone as a test router where many clients can connect to, without using my mobilecompany 3g/whatever line.
When you create the wifi router now, you have to select which line i will use with the router.. but i cant deselect, so it only makes a virtual LAN with no internet connection.. Is that possible?

Alfetch said:
Hey.. i was wondering if i can make the HDs wifi router to a local LAN ROUTER ONLY.
I will use the phone as a local router to a test environment. In that i mean that i will use the phone as a test router where many clients can connect to, without using my mobilecompany 3g/whatever line.
When you create the wifi router now, you have to select which line i will use with the router.. but i cant deselect, so it only makes a virtual LAN with no internet connection.. Is that possible?
Click to expand...
Click to collapse
The first problem you have here, is that you can only connect 1 device to the wifi router, not multiple devices. Secondly, it does only route wifi, so I doubt you'd be able to create a LAN even if you could connect more than 1 device.
Have you looked at WMWifiRouter? (http://www.wmwifirouter.com/)
It's not free, but there is a trial version, and I believe it allows you to connect more than 1 device at a time. It would still be an internet connection, but everything would be assigned an IP address from the HD2, so you should be able to use it as a LAN regardless.
Also, it may be possible to use WMWifiRouter with the phone in Airplane mode, so that would obviously give you a LAN with no internet access. Again, you can't do this with the default router, but you may be able to do it with WMWifiRouter.

ok well..
Well... thats not right..
I had 3 computers connected to it today. So the thing that you only can connect 1 to the wifirouter, is sadly wrong...
I tried the thing putting it on airplane mode, but it doesn't work.. thats why i asked here. hehe.
I'll try the software you said

Alfetch said:
Well... thats not right..
I had 3 computers connected to it today. So the thing that you only can connect 1 to the wifirouter, is sadly wrong...
Click to expand...
Click to collapse
Okay, I take that back then. I've never actually tried it myself - that was something I read on here. Goes to show how trustworthy advice on here can be lol

Heheh
Found a crap solution. just create a new connection under connections which doesn't have any relation to your mobilecompany.

bah
Alfetch said:
Heheh
Found a crap solution. just create a new connection under connections which doesn't have any relation to your mobilecompany.
Click to expand...
Click to collapse
well that didn't work either.. hehe.. And the problem you suggested is a "copy" of what the HDs already installed wifi router.. So you dont got that posibility.

Alfetch said:
well that didn't work either.. hehe.. And the problem you suggested is a "copy" of what the HDs already installed wifi router.. So you dont got that posibility.
Click to expand...
Click to collapse
Yeah, I only suggested that really because I thought that the in-built version could only be used for 1 device at a time.
The only thing I can think of now is to set a proxy for the internet connection on your phone, either a fake one, or a real one that simply blocks HTTP requests.
Worth a try?

..
Yup. Ill try that

i'm actually not sure how to do that.. can you tell me how?

Alfetch said:
i'm actually not sure how to do that.. can you tell me how?
Click to expand...
Click to collapse
Yes mate. Go to Settings (or Settings tab, Menu, All Settings) and Connections, Connections, and then "Set up my proxy server". I just tried setting it to my home PC (which has no proxy server running on it) and it allows the data connection, but returns 404 errors for any HTTP requests.
I've just tested this and I get 404 errors when making HTTP requests on my laptop. It seems to do what you need.
Hope it helps mate

GREAT! I will test it thanks m8

at home wifi internet connection problems...

Alright alright shoot me if this has already been asked or mentioned or thought of by anyone here or any one who you ever knew. I've been searching the entire net, the XDA forums have nothin on the subject (the the search function and i arent seeing eye to eye.).
My problem is this,
I am at home, connecting to my router, and that connects fine. But i am not connected to the internet. On my PC there is an option if i want to connect to the network, and then the internet. But in the HD2, there is no option to connect, Im only connecting ot the network, but not internet access.
went to a buddys house, he got his wi fi up and running in a matter of seconds, he did exactly as i have done, located the connection, typed the pass, and that was that.
but i cannot even find a place that asks me for an internect connection after i have connected to the network, nothing there.
And i cannot find any help on this subject.
i hope you get me if not, then dont bother. i am tired of reading mountains of crap that has nothing to do with my problem.
thanks in advance
appologies for my tone, just a little frustrated right now.
ah, btw, my 3g connect works fine. just not the wifi.

Once the network is connected there's nothing more to do to get internet access. At home, does it take a long time for the HD2 to connect to the network (arrows moving on the wifi icon more than ~5secs)? If you co to connection manager -> wifi -> advanced -> advanced tab, what IP do you have?

Well it connects to 'alice-wlan' really quickly, and automatically.
but there is still no internet connection. i think its a router setting problem, because on my pc i also have to connect first to alice.wlan (does it autoimatically) but then i have to manually connect to the internet (broadband)... i do not knwo how to change this.
i dont know what IP i have, you mean as a router?

correction,
now it connects to the router quite slow, if it does at all, then drops it almost immediatly.

saintnickxiii said:
i dont know what IP i have, you mean as a router?
Click to expand...
Click to collapse
Just tell me the IP address that is displayed where I explained.

saintnickxiii said:
on my pc i also have to connect first to alice.wlan (does it autoimatically) but then i have to manually connect to the internet (broadband)..
Click to expand...
Click to collapse
that makes me think you are using the old style routers that don't hold the broadband always open. meaning either the router or the pc need to dial the adsl. usually you put the connection details into the router and it handles it,,
just thinking out loud.

Hmm actually now you say that I've been at someone's place recently where they had an ADSL plan that was time-billed, so they had to open a browser and login before being able to access the web...
saintnickxiii said:
but then i have to manually connect to the internet (broadband)...
Click to expand...
Click to collapse
Could you please say what you have to do for this?

it says 0.0.0.0 hmmm i dont know if that right tho

Wait until the arrows stop moving on the wifi icon, and it whould then say something more relevant.

still nothing, 0.0.0.0 ...

kilrah said:
Hmm actually now you say that I've been at someone's place recently where they had an ADSL plan that was time-billed, so they had to open a browser and login before being able to access the web...
Could you please say what you have to do for this?
Click to expand...
Click to collapse
well, in win7 i alice connects automatically, then theres a broadband (internet) tab, i click on that, and it runs the use/pass and connects.