Database Users

Windows CE USB Devices cannot be installed and Active Sync issues

Hi,
To start off I`m using Garmin`s Kumara Touch - WM6 Premium. Just later I had the same problem I had before, active doesn't work. cables are properly plugged in, soft reset doesn't change a thing, when i go to My Computer -> Manage -> Device Manager -> Other Devices here appears Windows CE USB Devices with an exclamation point on it. As I was saying, I had the issue before and the resolution was a hard reset. My question is, has anyone encountered the same problem i had? because I don`t like the hard reset part. I have to reinstall everything I have in my PPC, I also tried a full back up via SPB Backup then did a hard reset then did a full restore, still the Unrecognized / Un-installed Windows CE USB Devices appears on Device Manager.
Can anyone help me with this. It would really be appreciated..
WMstorage works well btw, i can charge etc via WMstorage.
Here's the screenshot I get in Device Manager
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

gh0st- said:
Hi,
To start off I`m using Garmin`s Kumara Touch - WM6 Premium. Just later I had the same problem I had before, active doesn't work. cables are properly plugged in, soft reset doesn't change a thing, when i go to My Computer -> Manage -> Device Manager -> Other Devices here appears Windows CE USB Devices with an exclamation point on it. As I was saying, I had the issue before and the resolution was a hard reset. My question is, has anyone encountered the same problem i had? because I don`t like the hard reset part. I have to reinstall everything I have in my PPC, I also tried a full back up via SPB Backup then did a hard reset then did a full restore, still the Unrecognized / Un-installed Windows CE USB Devices appears on Device Manager.
Can anyone help me with this. It would really be appreciated..
WMstorage works well btw, i can charge etc via WMstorage.
Here's the screenshot I get in Device Manager
Click to expand...
Click to collapse
vista must install windows mobile center before use. You can download from microsoft.

teerapong.g said:
vista must install windows mobile center before use. You can download from microsoft.
Click to expand...
Click to collapse
Hi,
Im using windows xp, its just a theme. sorry i forgot to elaborate the platform im using.

gh0st- said:
Hi,
Im using windows xp, its just a theme. sorry i forgot to elaborate the platform im using.
Click to expand...
Click to collapse
If winXP you should Microsoft active sync V.4.5 for windows mobile6-6.1 and v4.2 up for windows mobile 5, if belows 4.5 windows mobile 6 can not synchronize.

The same problem for me. I have a Casio with windows CE 5.0 on it and XP SP3 with Activesync 4.5 installed. Unrecognized Windows CE device...
Any help, please?
Thanks.

I have same problem. Is someone in the meantime deal with this problem? Sorry for my English

attrib said:
I have same problem. Is someone in the meantime deal with this problem? Sorry for my English
Click to expand...
Click to collapse
you should try to update drivers...

Disable ActiveSync Autorun (cab)

Disable ActiveSync Autorun
When you want to run ActiveSync , Please go to "Program" , Run the "ActiveSyncRun"

so, when i need plug my cel into my pc i just need run the program and i will sync?i will dl asap xD that i was searhing for a while thanks i will reply as soon as i test xD

zxlch said:
Disable ActiveSync Autorun
When you want to run ActiveSync , Please go to "Program" , Run the "ActiveSyncRun"
Click to expand...
Click to collapse
From where you get that CAB or you created it?
And can you tell us what is the diference with this eLiAs_ASyncKiller.cab ? http://forum.xda-developers.com/showthread.php?t=386948
Witch one is better Now im using eLiAs_ASyncKiller and the Elias Killer is always on the processes to be able to kill the AS when is idle
WIth the Cab you provde what is the diferent, i mean what exactly the file do? Only write a reg keys or some procces are always runing to be able to kill it? just explain and we can see witch one is better.
Thanks in advance

i got a message
ithe program or setting cannot be installed beacuse it does not have sufficient system permissions.
any though? i cant install it from my Storage card, im installing on device memory, im running win 6.5 thanks

I tried it installed and active sync didn't run but when clicked to reactivate got a message "can't mem what said as was just after you posted trying to help another user" and never got a sync till removed the program.

zen kun said:
i got a message
ithe program or setting cannot be installed beacuse it does not have sufficient system permissions.
any though? i cant install it from my Storage card, im installing on device memory, im running win 6.5 thanks
Click to expand...
Click to collapse
True! You first need to install sdkcerts!
SDK Cert is a certificate used by the developers or programmers to sign the file/s you're using to make it/them eligible to be installed on the device. It's just like a consent from the developers for their OEM softwares to their users. To make the device accepts the file/s, the SDKCert have to be installed on the device for key matching purposes.
Hope this helps,
Senax

yea i have installed and i reinstall reset and again try install this cab no luck :S
its weird , in my Windows Emulator, works im not sure why not in my LG INCITE :S
i got wm 6.5

Guys i already told you this is the app im using http://forum.xda-developers.com/showthread.php?t=386948
Its awesome and really kill your Seync also you dont need to enable anything when you wana Sync your phone just plug the USB cable and all is done when the USB cable is unpluget the Sync is killed is simple like its must to be, also this person have alot more good litle tools for example i can recomend
ProcessKiller alias HTCDlg_killer
Im using this too on my device and all work perfect and save alot of my battery
Im using Blackstone with the ROM from my signature

i will try (again)
since i already try used before this, and i even post there, seems isnt working on my incite :S

Enable/disable ActiveSync alternatives
zen kun said:
i will try (again)
since i already try used before this, and i even post there, seems isnt working on my incite :S
Click to expand...
Click to collapse
First alternative;
ActiveSync Toggler;
http://www.pocketpcfreeware.mobi/download-activesync-toggle-v1-0-4-0.html
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Second alternative;
Disable ActiveSync via "do nothing" ;
http://forum.xda-developers.com/showthread.php?t=646708
Maybe one of these ActiveSync workaround's will work for you,
Senax

OH THANK YOU
=)
i will try thabks a lot ;D

Try killing the activesync process before installing using task manager. its replog or something...

I'm suddenly unable to connect to my Hero via the command line!

I don't know if this is related to Fresh 2.0b or not, but it just started today. I'm running Windows 7 64-bit. When I go to connect like I normally would (though CMD at C:/android_sdk/tools) I get no devices found when I give "adb devices." I've made sure my Hero is in "HTC Sync" mode, but it still isn't recognizing it. I also tried uninstalling and reinstalling HTC Sync, but I get the following error when trying to uninstall HTC Drivers:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I also get it when trying to reinstall HTC Sync, even though it tells me installation was successful. I can connect when in recovery mode, but you can't really do anything then. Any ideas?

are you using the latest version of HTC sync from their website?

TheBiles said:
I don't know if this is related to Fresh 2.0b or not, but it just started today. I'm running Windows 7 64-bit. When I go to connect like I normally would (though CMD at C:/android_sdk/tools) I get no devices found when I give "adb devices." I've made sure my Hero is in "HTC Sync" mode, but it still isn't recognizing it. I also tried uninstalling and reinstalling HTC Sync, but I get the following error when trying to uninstall HTC Drivers:
I also get it when trying to reinstall HTC Sync, even though it tells me installation was successful. I can connect when in recovery mode, but you can't really do anything then. Any ideas?
Click to expand...
Click to collapse
Don't uninstall the HTC Drivers, you need that. Just uninstall HTC Sync.
Also, make you have the latest HTC Sync software for the Hero dated from January. It contains the latest drivers.

Can you confirm that USB Debugging is still enabled?
Settings->Applications->Development->USB Debugging
Seems some people may have had it disabled when they updated to fresh 2.0b?

you don't need htc ync either... just update your SDK. At worst you will need to update the android_winusb.inf file by adding
Code:
%CompositeAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C9A&REV_0100&MI_01
%CompositeAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C9A&MI_01
in both the Google.NTx86 and Google.NTamd64 sections

I had trouble with that too on win7 64-bit lifehacker had the drivers that got it all working agian

just reboot your phone i take it you haven't done that since you flashed fresh 2.0b, once you reboot with usb plugged in it will say usb debugging connected

my phone freezes everytime i connect it to my pc, anyone know how to fix this?

whatsleft4her said:
my phone freezes everytime i connect it to my pc, anyone know how to fix this?
Click to expand...
Click to collapse
What ROM are you running?

fresh 2.0b

TheBiles said:
I don't know if this is related to Fresh 2.0b or not, but it just started today. I'm running Windows 7 64-bit. When I go to connect like I normally would (though CMD at C:/android_sdk/tools) I get no devices found when I give "adb devices." I've made sure my Hero is in "HTC Sync" mode, but it still isn't recognizing it. I also tried uninstalling and reinstalling HTC Sync, but I get the following error when trying to uninstall HTC Drivers:
I also get it when trying to reinstall HTC Sync, even though it tells me installation was successful. I can connect when in recovery mode, but you can't really do anything then. Any ideas?
Click to expand...
Click to collapse
same problem, same ROM.
i re-downloaded the sdk. re-installed HTC sync.
command prompt tells me "error: device not found".
i have re-booted my phone (several times since flashing the ROM).
i have it connected in sync mode with usb debugging ENABLED (phone states its connected.)
i can, however, adb into my phone if its in recovery...

This was happening to me, same rom and everything. I just went to the link below, and re installed the ADB drivers.
http://www.mydigitallife.info/2009/08/24/workaround-for-htc-hero-sync-problem-in-windows-7/

can we get someone who found the new sync to post a direct link for it thanks cause i keep getting the november/december one

BrianDigital said:
I had trouble with that too on win7 64-bit lifehacker had the drivers that got it all working agian
Click to expand...
Click to collapse
can you please post a link to where you got the drivers I went to life hacker but couldnt find em

get and install the htc sync from htc's eris support page. It has the latest drivers. Voila, fixed.

I got it working using the drivers found here:
http://www.mydigitallife.info/2009/08/24/workaround-for-htc-hero-sync-problem-in-windows-7/
I've also had zero problems using the new Damageless ROM.

TheBiles said:
I got it working using the drivers found here:
http://www.mydigitallife.info/2009/08/24/workaround-for-htc-hero-sync-problem-in-windows-7/
I've also had zero problems using the new Damageless ROM.
Click to expand...
Click to collapse
Exact link I posted lol

I went to the global HTC site, and downloaded the latest HTC Sync
http://www.htc.com/www/supportdownloadlist.aspx?p_id=283&act=sd&cat=all
uninstalled the HTC Sync and drivers I already had, installed the one I got from above, bam. Works perfectt.

I cant find this in the search so I figured here would be best to ask, I rooted my hero via Windows vista when it could automatically connect to HTC sync.. Since then I downgraded back to XP cause my sound card wasnt compatiable..
How the hell do I get adb working with my Hero, cause I sure cant connect to HTC sync anymore.. any help or links to the right thread would be much appreciated.

Problems unrooting...

Hi folks.
I'm trying to unroot my Wildfire in order to get the OTA update of the official FroYo release.
The problem is, I keep getting the below error message every time I run the RUU.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm using:
Windows XP Professional (SP3)
HBOOT drivers installed
HTC Sync uninstalled (registry clean has been carried out)
Correct RRU (UK TMOBILE) downloaded
Phone set to Disk Drive AND Sync (without software on there).
The current ROM is MoDaCo's 2.1 Stock build.
Has anyone else had this problem who can give me a heads up? It's starting to get on my nerves as I just want normal FroYo.
If no one has a solution, can someone provide the stock UK TMOBILE 2.1 Eclair ROM that I can flash with instead?
Thanks in advance,
Mark

Markerton said:
I'm trying to unroot my Wildfire in order to get the OTA update of the official FroYo release.
Click to expand...
Click to collapse
Flash the RUU for Froyo...instead using 2.1...
Markerton said:
Phone set to Disk Drive AND Sync (without software on there).
Click to expand...
Click to collapse
Phone must be set to "charge only" and enable USB debugging...

gimj01 said:
Flash the RUU for Froyo...instead using 2.1...
Phone must be set to " charge only" and enable USB debugging...
Click to expand...
Click to collapse
USB debugging is activated.
And I'm trying to flash the T-Mobile 2.1 RRU, which is where I get the error.
::EDIT::
When I use the RUU for the unbranded 2.2 then I don't get the above error ... I get error 131 - Customer ID Error.

Bump to the top...
...would really like some help, folks. I know I'm being pushy, rude, and other things, but surely someone's come across this before?!

You don't have to put your phone in disk drive mode...did you check?

I've tried it in Charge Only, Disk Drive and Sync.

It seems to be a system error...in my opinion if you run that RUU in any other computer will be ok...

gimj01 said:
It seems to be a system error...in my opinion if you run that RUU in any other computer will be ok...
Click to expand...
Click to collapse
Please don't take this the wrong way - but if that's the advice you're going to give me after one day then I'd prefer you to not post.
If you could READ my original post, I've tried it on Windows XP Professional (SP3) and Windows 7 Professional (x64).
NEITHER worked.

Sorry...I did'n notice that you tried 2 different systems...I can't find this in your post...

I had the same problem. The RUU installation file did not download completely. Compare the file size on your computer and on the shipped roms website.
I think this will solve your problem.

If you bother to search instead of needlessy bumping your own thread and snapping at people who are trying to help you would of discovered by now that the 131 error code is related to the gold card.

Yes, I noticed that it was due to it not downloading correctly.
However, my problem thickens...
I'm trying to flash the T-Mobile RUU from Shipped-ROMS, but now it's displaying error 140. This is because my recovery is of a different version (or something).
Any ideas? I can't use the GoldCard method as I don't have a Micro SD adapter.
And sorry for snapping at that poor bloke - I realised that that was completely out of order. So, if you're reading this, please accept my apology:
Sorry, fella.
Thanks in advance,
Mark
Sent from my HTC Wildfire using XDA App

Markerton said:
Yes, I noticed that it was due to it not downloading correctly.
However, my problem thickens...
I'm trying to flash the T-Mobile RUU from Shipped-ROMS, but now it's displaying error 140. This is because my recovery is of a different version (or something).
Any ideas? I can't use the GoldCard method as I don't have a Micro SD adapter.
And sorry for snapping at that poor bloke - I realised that that was completely out of order. So, if you're reading this, please accept my apology:
Sorry, fella.
Thanks in advance,
Mark
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
ive got a similar thread http://forum.xda-developers.com/showthread.php?t=881277 not one damn reponse.. AAAAARRRRGH! ive searched and found a couple of things that dont work would be nice if someone took the time

[Q] USB access to phone is not working

I wanted to get some picture from my phone to the PC and I'm confronting many errors new to me as of today. Never had this problem untill now and I hadn't changed anything recently.
Can not acess DCIM > Camera file. When I do it's empty
Can't see any pictures neither can I transfer any
Started transfering and I got an error
Look at the picture below
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

gr4v1ty said:
I wanted to get some picture from my phone to the PC and I'm confronting many errors new to me as of today. Never had this problem untill now and I hadn't changed anything recently.
Can not acess DCIM > Camera file. When I do it's empty
Can't see any pictures neither can I transfer any
Started transfering and I got an error
Look at the picture below
Click to expand...
Click to collapse
Try uninstalling the drivers via "Device Manger" on your pc and reconnect the device. Also, do u have usb debugging enabled in developer options?

SUDroid said:
Try uninstalling the drivers via "Device Manger" on your pc and reconnect the device. Also, do u have usb debugging enabled in developer options?
Click to expand...
Click to collapse
Now after a reset of the phone, device isn't recognized and the connected as media device doesn't show up anymore. Tried more than 1 computer.

Try uninstall the USB drivers from your PC. Or try other USB ports to detect your device. Sounds like your USB drivers has screwed up. Should not be your device problem.

Elvind Anderson said:
Try uninstall the USB drivers from your PC. Or try other USB ports to detect your device. Sounds like your USB drivers has screwed up. Should not be your device problem.
Click to expand...
Click to collapse
I tried on some other computers... You think uninstalling the drive will solve the problem since it's not on my main PC only?
EDIT : May it have something to do with this?

I have a feeling it is the charging port. I had a similar issue. Are you good with a soldering iron?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

gr4v1ty said:
I tried on some other computers... You think uninstalling the drive will solve the problem since it's not on my main PC only?
EDIT : May it have something to do with this?
Click to expand...
Click to collapse
Before start working on the hardware, I suggest to investigate the software side further. Have you make a factory reset? (Worst case). Try enable and disable the USB debugging mode as well. http://androidteen.com/how-to-enable-usb-debugging-mode-on-android-devices/
Try to toggle both media file mode and camera mode. See what is the response from your device to pc.

gr4v1ty said:
I tried on some other computers... You think uninstalling the drive will solve the problem since it's not on my main PC only?
EDIT : May it have something to do with this?
Click to expand...
Click to collapse
Don't connect to the internet and connect your phone with the drivers uninstalled. This will dl the stock window drivers instead of samsung drivers.

SUDroid said:
Don't connect to the internet and connect your phone with the drives uninstalled. This will dl the stock window drivers instead of samsung drivers.
Click to expand...
Click to collapse
How do you even unisntall those drivers? I've tried installing Kies and it didn't work!à
EDIT: I did uninstall them and installed this : http://forum.xda-developers.com/showthread.php?t=961956... Still, no positive result..

gr4v1ty said:
How do you even unisntall those drivers? I've tried installing Kies and it didn't work!à
EDIT: I did uninstall them and installed this : http://forum.xda-developers.com/showthread.php?t=961956... Still, no positive result..
Click to expand...
Click to collapse
You uninstall the driver via "Device Manager" which u can get by right clicking "My computer" and click on Manage.
Then find the device manager tab and find your device on the list.

SUDroid said:
You uninstall the driver via "Device Manager" which u can get by right clicking "My computer" and click on Manage.
Then find the device manager tab and find your device on the list.
Click to expand...
Click to collapse
The device doesn't show in DM anymore...
EDIT : Problem solved itself. Today it decided to install the good drivers ...