Does anybody knows the direct link in Startmenu to "All settings"?
The link is also seen on the settings Tab (left softkey).
Perhaps someone knows the link from the registry.
Since settings is not a "Folder" in real sense no shortcut possible.
You can however try the control.exe from utils.zip in this post and create a shortcut for it.
Control.exe
That's not true because in Duttys Rom I remember there was a shortcut in startmenu.
JLowe said:
That's not true because in Duttys Rom I remember there was a shortcut in startmenu.
Click to expand...
Click to collapse
Hi JLowe, you are correct about duttys rom. The shortcut on the programs page has a registry entry.
When I can get to my pc I'll post the contents of the keys for the entry. May take a day or so, unfortunately I don't have any screen capture soft on my HD.
Regards, D.
Hi again, just checked the link and it leads to the TF3D settings tab not the all settings page. I'll still post the reg info though as this may prove useful.
Regards, D.
Related
Is there a way to change the softkeys within TouchFlo 3D?
I have the Touch Pro, and with a remap app i can change the softkeys when TF3D is not running, but a s soon as you launch the TF3D the two softkeys are set to "PHONE AND PROGRAMS".
Can this be done with a hack, or anything in the registry?
Your help will be greatly appreciated.
regards
Rich
Yes, there is an easy way to do this - though it took me a long way to find it.
;-)
I used the latest Version of AdvancedConfig (v3.2, see: http://forum.xda-developers.com/showthread.php?t=418151) and changed these settings via Menu -> More Setting -> Key Mapping, namely left and right softkey. In my case I redefined them to iContact and ThumbCal, which are relabeled in TouchFlo 3D correctly and automatically.
Hope this help's you.
Cheers,
Uwe
Woooohooooo.
Many thanks for your help, works a treat.
Cheers
Rich
Hello any can advise how to remap softkey for tabs other than the home tab?
iggy said:
Hello any can advise how to remap softkey for tabs other than the home tab?
Click to expand...
Click to collapse
I guess by editing manila files only. I don't know any other solution for this.
BTW, Advanced Config and TouchHD Tweak dont' work for Rhodium Manila, can't remap softkeys this way.
How can i remap the softkeys in rhodium tochflo3d? Is there a solution?
Advanced Config V3.3. Under menu and more settings you will see the softkey remapping menu.
softkey to "PROGRAMS"
Jimllfixit said:
Is there a way to change the softkeys within TouchFlo 3D?
I have the Touch Pro, and with a remap app i can change the softkeys when TF3D is not running, but a s soon as you launch the TF3D the two softkeys are set to "PHONE AND PROGRAMS".
Can this be done with a hack, or anything in the registry?
Your help will be greatly appreciated.
regards
Rich
Click to expand...
Click to collapse
I would like to map the softkey to "PROGRAMS", it there anyone know the path or registry value? Thank you.
Have you guys forgot that there is a search button on this forum?
1. For editing softkeys on the home tab, use either Advanced Config or Softkey Manager (unless you want to edit the registry yourself). SM is here: http://forum.xda-developers.com/showthread.php?t=414405.
2. For editing softkeys on the other tabs, your best solution is using SS MaHo. This will not actually change the softkey itself, but it will "overwrite" it with a label so that it changes what the button does. It works just fine. See thread here: http://forum.xda-developers.com/showthread.php?t=493810.
Greetings,
Here is a way from me, to make it possible, to customize your hardware buttons.
Step one:
Start the attached FDC Taskmanager, then tap <Menu>, <Options>, set enabled on "Create RegEdit Shortcut".
Now you can open the Regedit - Shortcut in Startmenu ( <Programs> - <System> ) and .reg - files will be associated with FDC-TM.
Now doubletap on the attached .reg - file, select importing.
Ready!
Restart the device!
Feature lost: Navipanel not start automatically, when you put the phone in carkit. Copy the Navipanel.lnk in Startmenu or lay it of the navigation-button.
Step two:
1. klick "Start"
2. klick "Settings"
3. klick "Hardware-Buttons"
4. customize
Greetz Mirko
edit: when is it not easy enough, give me your adress and I will come to you and do it for you!
Thanx for the effort and for sharing Mirko!
I will definitely try it
bravo super boulot
Still starting
Hi!
I have succesfully created the two buttons in the control panel of the PDA and assigned them to right and left program key. And the work!
My problem is that the Tomtom and Footprint also start, which is a feature I would like to remove. I would much rather have them start the old fashion way, as this is a phone as a primary device.
Can anyone direct me to a solution. I would like to keep the programs installed but can as a last resort remove them if it helps (and if I can).
Snwstrm
My problem is that the Tomtom and Footprint also start, which is a feature I would like to remove.
Click to expand...
Click to collapse
This problem occurs when you do not set the "NaviService" service to Manual and stop it. See the first post in this thread from Mirko, he explains it.
@ Snwstrm
U must read my post, stands:
"Now go with the FDC Taskmanager to "Services", stop "NaviService(NPS0)", long klick it, then change to "set manual". When you not do this, you have a double assignment on buttons."
Greetz Mirko
edit: Argh! Not seen, Evincar was almost answering, sorry!
No such service
Hi!
Thanks for a quick reply. I don't have FDC but Pocket Controller Pro as a task handling program and I cannot see any service that resembles the one U are talking about. My guess is that it differs depending on localization, but I will try to get a hold of FDC program to verify.
I tried to get help from HTC, but they couldn't help me. I guess they have some deal w TomTom and don't want to make it easy to switch or eradicate their program. They wrote to me about PocketToolman but it did nothing new, just a nifty way to access controlpanel.
Keep on looking,
Snwstrm
What about Google? FDC TM is freeware.
Greetz Mirko!
Victory!
You are absolutely right! I will have to contact SOTI regarding their software. FDC worked wonders and now I see no trace of TomTom or Footprint. Just the way I wanted.
Thanks!
Snwstrm
Nice, can help!
Thanks for this. I switched from Vox and I was quite angry, when I had to tap to top right to confirm something. Now footprint does this.
mirko.prinz said:
Greetings,
Here is a way from me, to make it possible, to customize your hardware buttons.
Import the attached REG-file with FDC Taskmanager or another program, that can use reg-files. Restart the device.
Feature lost: Navipanel not start automatically, when you put the phone in carkit. Copy the Navipanel.lnk in Startmenu or lay it of navigation-button.
Now go with the FDC Taskmanager to "Services", stop "NaviService(NPS0)", long klick it, then change to "set manual". When you not do this, you have a double assignment on buttons.
Greetz Mirko
Click to expand...
Click to collapse
Mirko ,could you explain me more. I'm not good in registry edit,actually just started.
I've downloaded your attached file and already set it on my device but I don't under stand about your explanation.
1 "Copy the Navipanel.lnk in Startmenu or lay it of navigation-button." I don't where is the start menu in Registry and how to do it.
2 stop "NaviService(NPS0)", long klick it, then change to "set manual" that means
go to HKLM\service\NaviService and change value form default to 0???? and I don't understand about how to set manual could you explain me more.
Thank you very much
Crezyart84 said:
Mirko ,could you explain me more. I'm not good in registry edit,actually just started.
I've downloaded your attached file and already set it on my device but I don't under stand about your explanation.
1 "Copy the Navipanel.lnk in Startmenu or lay it of navigation-button." I don't where is the start menu in Registry and how to do it.
2 stop "NaviService(NPS0)", long klick it, then change to "set manual" that means
go to HKLM\service\NaviService and change value form default to 0???? and I don't understand about how to set manual could you explain me more.
Thank you very much
Click to expand...
Click to collapse
Nothing in registry, only with FDC Taskmanager and with the Button-Customizing in "Start"-"Settings"
Greetings Mirko
I did it , that's right nothing to do with registry.
I confused about that but I use AE button plus to
customize the button.
thanks for mirko
thanks for every thread this question.
request for task manager
can u help for program FDC Task Manager?
thank
iampong said:
can u help for program FDC Task Manager?
thank
Click to expand...
Click to collapse
Here is it!
Question about the reg-file:
Start FDC-TM, then <Menu>, <Options>, set enabled on "Create RegEdit Shortcut".
Now you can open the Regedit - Shortcut in <Programs> - <System> and .reg - files will be associated with FDC-TM.
When doubleclick on .reg - file, select importing.
Ready!
Greetings Mirko
Works a treat, ta!
Help Needed
Hey there mirko, Could you please help me with a very detailed way as I have tried to do as you have said in your first post but to be honest I have no idea.
I have imported the the keys to the registry (I think) then I have copied the navipanel to start menu but I am having trouble with the last part using the task mananger. If at all possible would Somebody Please give a detailed instructions.. Thankyou Very much
you can also, customize the hardware buttons with the M2DC (manilla 2D customizer)...
Hi there,
is there any way to force Manila to update the links shown in the programs tab / new startmenu?
I'd like to change them by registry, but then I need to restart Manila, what is not very smart.
So, does anybody know of a commandlinearg for manila.exe to do this?
Like manila.exe --updateprogramspage <--this does not work...
Thanks in advance.
BTW: If somebody feels this isn't the right place for such a post, feel free to move it. I already tried Q&A but no response.
first option:
go to the "setting tab" on the home screen click "customise tabs" and rearange any tab order. click done and manila will restart its self.
Second option:
Goto all settings in the personal tab click today icon then in items tab (bottom), uncheck tf3d then click ok. go back into the today settings and check tf3d again, click ok and it will restart its self.
hope this worls out for you. Ive tried this tweek and it works greate. unlimited number of icons in the manila programs launcher only shame is after the first 30, you have to edit the rest using registry entries.
Thank you for the tip,
I'm using TFDetacher, so I'm able to restart Manila very easy.
But thats the problem, I don't want to restart it.
I want to manipulate the Start menu Items in runtime.
slow23 said:
Thank you for the tip,
I'm using TFDetacher, so I'm able to restart Manila very easy.
But thats the problem, I don't want to restart it.
I want to manipulate the Start menu Items in runtime.
Click to expand...
Click to collapse
I activate and desactivate TF3D with a mortscript, whitch write a regkey and refresh the todayscreen
Greetings,
My TP2 is running manila 2.1. I really like the "All Contacts" feature in Manila better than the default windows Contacts. My Manila home screen has the right soft key set to Contacts. Is there some way to launch All Contacts from a link or exe that I could then assign to the right soft key? I could not find anything on the device itself that would launch All Contacts.
Thanks for the help
Doug M.
I believe this is what you're looking for.
Perfect. Thanks for your help.
Doug M.
bolasz said:
I believe this is what you're looking for.
Click to expand...
Click to collapse
This is what I've been looking for. But I'm editing my action screen and would to link the manila contacts to it. Can you tell me how I would do it without having to use the lnk u made. I have two lines. Parameters and Path. Thanks.
Nevermind. I'm an idiot. I just looked at the properties of the lnk you provided to get the path and param I need. Thanks.
Been looking for this for a while. Thanks for sharing.
Does anyone know how to change this lnk so that it opens the "Favorite Contacts" tab instead of the "All Contacts" tab?
dwmackay said:
Greetings,
My TP2 is running manila 2.1. I really like the "All Contacts" feature in Manila better than the default windows Contacts. My Manila home screen has the right soft key set to Contacts. Is there some way to launch All Contacts from a link or exe that I could then assign to the right soft key? I could not find anything on the device itself that would launch All Contacts.
Thanks for the help
Doug M.
Click to expand...
Click to collapse
Even more "system" level:
Code:
HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Rai\:MSCONTACTS
1 = "\Windows\manila.exe" --switchtopage Manila://people/browserlayer/peopleAll.page
This will replace the official "Contacts" icon from Start menu.
Hi there!
Ive seen the new shortcuts on the homescreen on every video again and again. The number of programs you can add there is extensible but limited. So is there an "All Programs" button like on previous TouchFlo versions on the programs tab or at least a possibility to see all programs installed? Maybe im blind or have forgotten about it but i think i havent seen something like this on any video.
Thanks!
Phil
Sadly, it doesn't exist. I have been asking around if anyone can port the old Manila 2.1 start menu and program tab over yet, but no one has responded to say yes it can be done
Damnit...so theres no scrollable list with all programs installed on the device in Sense anymore? Really no way?
Isn't WM 6.5 start menu about the same ?
Yes and I believe that's exactly the reason why the programs tab is gone.
Yeah, could be the reason for it. But a bad exchange if you ask me...but there are other programs out there that could be useful to me like TouchLaunch.
-Vulture- said:
Hi there!
Ive seen the new shortcuts on the homescreen on every video again and again. The number of programs you can add there is extensible but limited. So is there an "All Programs" button like on previous TouchFlo versions on the programs tab or at least a possibility to see all programs installed? Maybe im blind or have forgotten about it but i think i havent seen something like this on any video.
Click to expand...
Click to collapse
The "All Programs" button in TouchFlo just went to an icon view of the "\Windows\Start Menu\Programs" folder - This is exactly what tapping the "Start" button in WM-6.5 now does.
a great alternative for this is a program called launchpad which gives you a program launcher from the taskbas star shortcut but also give you the normal windos shotcut fron the hard key below. try it you wont be dissapointed
from 4pda.ru forum
1. disable manila
2. delete key HKLM>Software>HTC>Manila>Configuration, if exists
3. install the cab
4. delete ManilaFull.xml from /Windows
5. SR
6. enable manila
thanks to jamrecords
sorry for my english