First, I updated my PPC ROM I got a problem with the start screen, it doesn't show "smart mobility" any more... but I got the white screen instead! what should I do.
Second. now my active sync doesn't work any more the USB line is fine the connection setting is setted to "USB"... And I still can use blue tooth to sync..
HOW DO I SOLVE THE PROBLEMS?
Thanks!
Hold power nutton + Camera button and push reset button with stylus wait 3 seconds and then release the reset button but keep pressing the power button + camera button u will be then in bootloader page
rudy70 said:
Hold power nutton + Camera button and push reset button with stylus wait 3 seconds and then release the reset button but keep pressing the power button + camera button u will be then in bootloader page
Click to expand...
Click to collapse
Thank you about your advice about the bootloader page... but it doesn't solve the Splash Screen is White... Apparently it seems that my rom is also no longer can be flash!! (TT)
Ok now, I have my situation solved!
I had to turn it back to the original SPL and then putinthe official ROM to make it back up to the Original state... then re Hard-spl again....
Thanks!
Related
???????? :evil:
push "standbye" and "cam" button and than the reset
to show the colordisplay
and than put the usb in and flash another ROM
Click to expand...
Click to collapse
don't work (((
Well, this has happend to me a couple of times too, just hard reset.
Push Camera + Comm manager button together, then soft reset, but keep holding the camera and comm button.
When you get a message, click the green phone.
yeah, not sure what you're yelling, but i think your phone resets and only goes to a white screen and sits there?
happned to me and i almost cried. tried hard resets and nothing. left battery out for a day and nothing. i left it out again for a few hours cause i was pissed, put it in at 4am, did another hard reset and it started to work like normal, though resetted. keep trying!
I'd try all the stuff mentioned and make sure it is plugged in to the power supply.
hard reset and bootloader
for hard reset after you press both cam and comm button press soft reset the trick is dont release bot cam and comm bottons untill it prompts. finally press green button.
for boot loader device must be connected to crable or power. and press cam and power button then press soft reset. still the sam don release power and cam button until you see the color screen.
hi, after instaling pretty much of applications on my wizard it just stopped respond. if u do a soft reset it boots but freezest on todays screen and thats it. there is a massage dispalied "low memory". i cannot do a hard reset, upgrade rom anything. is there any other way to perform a hard reset ?? (i tried comm mnr+voice+plus soft reste) HELP !!!
cheers, matt
Some people have joy with - turn off - press and hold comm, record and camera buttons and press power on.
If that fails you should be able to flash your device with the same rom. Turn off, press camera button and hold then press power button and bootloader multicolored screen should come up. Connect via usb to pc and reflash rom.
We dropped one of our wing's and now the ONLY thing not working is the power button at the top. I had psshutxp so I mapped "Display Switch" program to my camera button and I am using camera button to turn off the screen.
The problem I have now is when I took the battery out to change the SIM card - I don't have any way to start the phone.
I can hold the camera button and plug into my computer usb and get to the color screen where it shows the SPL and IPL numbers, is there any program or way to reboot the phone from command line, so that it can boot up?.
Please help.
Thanks.
try not holding the camera button when you plug it in.
The camera button links to the bootloader, so by not pressing it, it will skip the bootloader screen and jump to the os.
fzzyrn said:
try not holding the camera button when you plug it in.
The camera button links to the bootloader, so by not pressing it, it will skip the bootloader screen and jump to the os.
Click to expand...
Click to collapse
If I don't hold the camera button, the phone won't start.
It is stuck at the white HTC splash screen when you first start up the phone....after that its just a black screen, ive tried both hard and soft resets. I heard theres a way to flash it from the bootloader but i dont know how....So guys help me out....I really wanna fix this thing
CraigC94 said:
It is stuck at the white HTC splash screen when you first start up the phone....after that its just a black screen, ive tried both hard and soft resets. I heard theres a way to flash it from the bootloader but i dont know how....So guys help me out....I really wanna fix this thing
Click to expand...
Click to collapse
Hi there;
To get into the bootloader mode, switch phone off and then hold the red/green answer buttons, and then power up the phone, hold this down until you get the 3 different colours on the screen.
*By the way, if anyone more experienced wishes to correct me, feel free*
*Damn Doublepost*
To enter the bootloader:
Hold down the camera button and reset device with the stylus. Keep holding the camera button until you see 'tricolor' bootloader screen.
An alternative way to enter bootloader:
Switch the device off by long pressing O/I (power) button. hold down the camera button while pressing the O/I button about 1 second. Keep holding the camera button until you see 'tricolor' bootloader screen.
Alternative(universal?) bootloader(3)
As almost all htc smartphones with onboard camera, when you push and hold the camera(photo) button, and plug in usb adapter. Even a "stupid" usb power adapter will work.
To hard reset:
Hold down send/reject buttons (green/red at the front) and reset with the stylus; release the stylus but keep holding the buttons till you get 'this will erase all your personal data' message, then press 'action' (big front button) to hard reset.
Good LUck
Same here
I have a HTC Touch 6900 I tried to upgrade the rom and now the HTC won't boot up. I tried to hard reset, and tried to get to the bootloader but nothing can anyone help me, Please
i had this same problem five minutes ago i removed the battery for a few minutes and replaced it and it turned on
Rdit:
--
ok the problem is solved... i´ve found the right unbrick ROM now it works
--
ok... now i have the same Problem. I wanted to flash from Onyx WM6.5 (5.0) to the original Vodafone Rom WM6 which i dumped.
After the flash finished, the device rebooted, the Vodafone screen was on the display and then it was black...
Hardreset = no change
Flashing back to Onyx = no change
remove battery = no change
bootloader is reachable and flashing works but the problem with booting is still there
I have a big problem with my i9000.
I installed Launcher Pro from Andriod Market. Then i restart the device.
When its restarting it gets to the unlock screen (drawing).
When i draw the right patron it starting to unlock for a second. (circles turn green)
Then i get a black screen for some seconds. After that i get the unlock screen again...
I tryed to connect the device with my pc, but no result.
Also tryed to reset is. (holding down-button and pressing power on)
Does someone know how to get a real hard-reset or some other solution?
gr
japperr said:
I have a big problem with my i9000.
I installed Launcher Pro from Andriod Market. Then i restart the device.
When its restarting it gets to the unlock screen (drawing).
When i draw the right patron it starting to unlock for a second. (circles turn green)
Then i get a black screen for some seconds. After that i get the unlock screen again...
I tryed to connect the device with my pc, but no result.
Also tryed to reset is. (holding down-button and pressing power on)
Does someone know how to get a real hard-reset or some other solution?
gr
Click to expand...
Click to collapse
The vol-dwn + power combination doesn't work - the real combination is vol-up+ home btn + power button. Should take you to the recovery menu(you move up and down with the vol key and select with the home button).
Toss3 said:
The vol-dwn + power combination doesn't work - the real combination is vol-up+ home btn + power button. Should take you to the recovery menu(you move up and down with the vol key and select with the home button).
Click to expand...
Click to collapse
Yes!! it works. Strange that everywhere i looked i get the wrong button combination.
No i have a nice clean Galaxy S!!!
Thank you.