It is stuck at the white HTC splash screen when you first start up the phone....after that its just a black screen, ive tried both hard and soft resets. I heard theres a way to flash it from the bootloader but i dont know how....So guys help me out....I really wanna fix this thing
CraigC94 said:
It is stuck at the white HTC splash screen when you first start up the phone....after that its just a black screen, ive tried both hard and soft resets. I heard theres a way to flash it from the bootloader but i dont know how....So guys help me out....I really wanna fix this thing
Click to expand...
Click to collapse
Hi there;
To get into the bootloader mode, switch phone off and then hold the red/green answer buttons, and then power up the phone, hold this down until you get the 3 different colours on the screen.
*By the way, if anyone more experienced wishes to correct me, feel free*
*Damn Doublepost*
To enter the bootloader:
Hold down the camera button and reset device with the stylus. Keep holding the camera button until you see 'tricolor' bootloader screen.
An alternative way to enter bootloader:
Switch the device off by long pressing O/I (power) button. hold down the camera button while pressing the O/I button about 1 second. Keep holding the camera button until you see 'tricolor' bootloader screen.
Alternative(universal?) bootloader(3)
As almost all htc smartphones with onboard camera, when you push and hold the camera(photo) button, and plug in usb adapter. Even a "stupid" usb power adapter will work.
To hard reset:
Hold down send/reject buttons (green/red at the front) and reset with the stylus; release the stylus but keep holding the buttons till you get 'this will erase all your personal data' message, then press 'action' (big front button) to hard reset.
Good LUck
Same here
I have a HTC Touch 6900 I tried to upgrade the rom and now the HTC won't boot up. I tried to hard reset, and tried to get to the bootloader but nothing can anyone help me, Please
i had this same problem five minutes ago i removed the battery for a few minutes and replaced it and it turned on
Rdit:
--
ok the problem is solved... i´ve found the right unbrick ROM now it works
--
ok... now i have the same Problem. I wanted to flash from Onyx WM6.5 (5.0) to the original Vodafone Rom WM6 which i dumped.
After the flash finished, the device rebooted, the Vodafone screen was on the display and then it was black...
Hardreset = no change
Flashing back to Onyx = no change
remove battery = no change
bootloader is reachable and flashing works but the problem with booting is still there
Related
hi, after instaling pretty much of applications on my wizard it just stopped respond. if u do a soft reset it boots but freezest on todays screen and thats it. there is a massage dispalied "low memory". i cannot do a hard reset, upgrade rom anything. is there any other way to perform a hard reset ?? (i tried comm mnr+voice+plus soft reste) HELP !!!
cheers, matt
Some people have joy with - turn off - press and hold comm, record and camera buttons and press power on.
If that fails you should be able to flash your device with the same rom. Turn off, press camera button and hold then press power button and bootloader multicolored screen should come up. Connect via usb to pc and reflash rom.
First, I updated my PPC ROM I got a problem with the start screen, it doesn't show "smart mobility" any more... but I got the white screen instead! what should I do.
Second. now my active sync doesn't work any more the USB line is fine the connection setting is setted to "USB"... And I still can use blue tooth to sync..
HOW DO I SOLVE THE PROBLEMS?
Thanks!
Hold power nutton + Camera button and push reset button with stylus wait 3 seconds and then release the reset button but keep pressing the power button + camera button u will be then in bootloader page
rudy70 said:
Hold power nutton + Camera button and push reset button with stylus wait 3 seconds and then release the reset button but keep pressing the power button + camera button u will be then in bootloader page
Click to expand...
Click to collapse
Thank you about your advice about the bootloader page... but it doesn't solve the Splash Screen is White... Apparently it seems that my rom is also no longer can be flash!! (TT)
Ok now, I have my situation solved!
I had to turn it back to the original SPL and then putinthe official ROM to make it back up to the Original state... then re Hard-spl again....
Thanks!
Hi all,
This is my first thread after being around with the availble great roms for awhile, this morning I came across a weird problem, somehow when I try to hard reset my X1 ( 2 silver buttons, reset button with stylus ) it just reboots back, like a soft reset. So instead giving me the hard reset options, it just boots like normal with the SE logo etc.
This is the same when I try too enter the rainbow bootloader screen, device shut off, removed battery and reinserted. But when I press volume down and power button, is just reboots as normal.
The weird thing however is, that I am able to flash roms when I use the ruu tool, it just goes to rainbow screen by itself, I just cant do it myself with the hardware buttons, or do a hard reset! This always worked.. Any ideas ?
Edit : I reflashed hard-spl, did nothing to solve this.
Thanks!
To hard rest, it's the soft keys and the main power button, not the with the reset button.
Sfkn2 said:
To hard rest, it's the soft keys and the main power button, not the with the reset button.
Click to expand...
Click to collapse
no as long as your holding the two front soft keys when the phone powers on it should go into hard reset. but it only works properly for me when i use the reset button.
make sure your holding the two front keys until the HR screen comes up, again, don't just press them once, HOLD them until it says in blue writing on grey background, press r to reset then press the r on the keyboard to HReset
this is the same for entering bootloader, hold volume down (and make sure it is down not up) and power until you get the rainbow screen
Weird thing is, I know how to do these two tricks.
I did like 20 hard resets with the two soft buttons etc.
Same goes for bootloader, only that isnt a big problem cause
I found out I can use enterbotloader.exe in windows map. Maybe
theres a shortcut for the hard reset too? Thanks
js1987 said:
Hi all,
This is my first thread after being around with the availble great roms for awhile, this morning I came across a weird problem, somehow when I try to hard reset my X1 ( 2 silver buttons, reset button with stylus ) it just reboots back, like a soft reset. So instead giving me the hard reset options, it just boots like normal with the SE logo etc.
This is the same when I try too enter the rainbow bootloader screen, device shut off, removed battery and reinserted. But when I press volume down and power button, is just reboots as normal.
The weird thing however is, that I am able to flash roms when I use the ruu tool, it just goes to rainbow screen by itself, I just cant do it myself with the hardware buttons, or do a hard reset! This always worked.. Any ideas ?
Edit : I reflashed hard-spl, did nothing to solve this.
Thanks!
Click to expand...
Click to collapse
I have the exakt same problem I use smabergs latest rom, and I cant hard reset or enter tricolor screen, please anybody know how to solve this?
hi guys!
long time with no post from me but today the stupid thing (HD) did it again
i installed an app for home page tweaking and after the soft reset my HD dosen't starts right
it boots, does what it does but it sucks on the black screen with some icons on the top bar and the names of the soft keys on the bottom bar. i can only turn ona anf off the screen by pressing the power button, but nothing else. screen doesn't react, soft keys don't react either
i don't realy want to hard reset it because it took few months to make it working right, but i would do also this if there is no other solution
BUT...
when i try to hard reset it it stucked again in the tricolour mode with "SERIAL" word on the botom
what is this? i can't write anything so what is this serial all about?
so, please let me know if there is any solution for:
1. step by step booting in order to skip the process or application that cause the stuck?
2. how can i hard reset the thinggie?
thanks a lot!
Had the same problem after I installed HTC home and HTC customizer...after a soft reset, TF3D failed to load and the phone froze. Had to hard reset in the end--thankfully, I run a backup once a week, so I really didn't lose anything. I was able to run 'Clear Storage' before TF3D's startup fail managed to freeze my phone. So it's all good on my end...
Backup backup backup...a little too late...
Maybe you are not doing the hard reset correctly, you press and hold both Vol up & Vol down keys, whilst holding down power button aswell until it turns on. Hard reset screen should come up.
noris08 said:
hi guys!
long time with no post from me but today the stupid thing (HD) did it again
i installed an app for home page tweaking and after the soft reset my HD dosen't starts right
it boots, does what it does but it sucks on the black screen with some icons on the top bar and the names of the soft keys on the bottom bar. i can only turn ona anf off the screen by pressing the power button, but nothing else. screen doesn't react, soft keys don't react either
i don't realy want to hard reset it because it took few months to make it working right, but i would do also this if there is no other solution
BUT...
when i try to hard reset it it stucked again in the tricolour mode with "SERIAL" word on the botom
what is this? i can't write anything so what is this serial all about?
so, please let me know if there is any solution for:
1. step by step booting in order to skip the process or application that cause the stuck?
2. how can i hard reset the thinggie?
thanks a lot!
Click to expand...
Click to collapse
Sounds like a software issue Hard Reset sounds best
What you are seeing (Tri Coloured Screen) is the boot loader it probably showed up because you didnt hold the volume up key when doing Hard Reset
its not a problem just remove battery
then do hard reset (make sure both volume buttons UP/Down are press at the same time and press power button ..........follow what the screen says
thank you guys for your opinions
i know how to do a hard reset (cause is not the first one) and i tryed severl times before i post my request here
finaly i manage to do an "upgrade" using USB connection from my rom version to the same rom version. strange but this is what i did, and then i was able to do the hard reset in the usual manner
now i am working hard to restore all applications andtweaks that i had
luckily i use often backup and i still have contacts and personal infos
Hi, I am having problems getting my X2 into boot mode in order to update the firmware to MR1- I've followed the instructions on SE Update Service (press and hold volume down button and power button until white screen appears)
All that happens is the vibration feedback to indicate power on, then the phone loads up as normal with the logo in a black background???? anyone else come across this?
help me X2
hi all fri
i had one sony x2 ,but have some problem !can you tell me how to enter undate mode !and X2 chinese rom! thanks
do you press and HOLD both buttons till the desired screen appears? Should not release Power button before the screen emerges..
Yes I did, It's just loads up as normal, I have the xperia x1 so I'm not new to this devices, anyone experienced this before?
Are you sure that you are doing it exactly like this:
1. Remove and re-insert battery.
2. Press AND HOLD the volume down button.
3. Press AND HOLD the power button at the same time.
Hold the two buttons (and no other buttons) until logo on white background appears.
The order is important, first the volume down button - keep pressed, then the power button - keep both pressed.
The most important thing that many people miss is...
You must NOT have the USB cable plugged in when you do this. Only plug the phone in after the white screen appears.
This is not my first xperia as I still have the x1, so I do know what I'm doing, the phone boots up as normal (sony ericsson logo with the 'black' background) unlike the x1 with the tricolor screen. Is there anyother way to enter the bootloader or reset the whole ROM? someone please help as I can't update my phone and spony ericssonwon't do anything about it because it hasn't been officially released in the UK :S
i have the same issue tryed every thing (volume down + power =nothing. volume down + power +soft reset button= nothing. look in the registry found nothing relevant to bootloader )i think bootloder got messed up or something. is there a folder or something containing the bootloder
adidas35th said:
Hi, I am having problems getting my X2 into boot mode in order to update the firmware to MR1- I've followed the instructions on SE Update Service (press and hold volume down button and power button until white screen appears)
All that happens is the vibration feedback to indicate power on, then the phone loads up as normal with the logo in a black background???? anyone else come across this?
Click to expand...
Click to collapse
Exactly the same problem
same here, very frustrated, need my phone back to factory settings! any1 help please???
It's important that you normally turn off the phone before getting out the battery or it will reboot normally when the battery is inserted.
X2 DEAD
I also have the same problem as my device does not turn on nor k is functioning BOOTLOADER MODE.
only once beats vibrating k after the computer sees an unknown device.
I left my phone in few mobile services, nobody did any good to it - same problem still left. Last chance will be SE service.
do u find solution to repair your x2
do u find solution to repair your x2
No.. my phone few weeks ago went dead (after installing custom cab's)..now its only peace of trash
Giz1984 said:
same here, very frustrated, need my phone back to factory settings! any1 help please???
Click to expand...
Click to collapse
To get back into factory-defaults, then use the Phone reset found under Settings->System. That will re-install everything.