Related
Has anyone this great app?
http://geocities.com/myppcpe2003/index.htm
Maybe a key for it?
I'D like to use it :twisted:
It appears to be the best prog that I've looked for to switch my XDA2 to a changeable caller profile phone like a nokia!
I liked this app initially, great interface and lots of functionality, however I found a few problems:
Sometimes after changing profiles the ring would be silent when it should be heard - the dialog would pop up showing the caller, but no sound.
You can set it to automatically revert to the normal profile after <n> minutes, or at a certain time. For me this only happened when the XDA was on - thus if it should have switched profile and then a call comes in before you have switched on the device it still uses the wrong profile.
If these problems can be sorted it would be a great app.
As for a key... go to PocketGear and but it!
Yeahh..So It's not a perfect software again.
Do you know any program that analyze the caller from the contacts and you can select for example just one number or one goup to receive? The other ignored or silent like Nokia phones.
I have come across MUTX RingToneX which allows you to set ring tones by contact or category so this may well give you what you want. Can't tell you how good it is, but you can get a free trial from the link below:
http://www.pocketgear.com/software_detail.asp?id=8675
Thx for the answer but I'm looking for an app with easy switching between sound profiles.
For example:
A) MODE
Every unknown number has RINGTONE1
FAMILY group has RINGTONE2
FRIENDS group has RINGTONE3
MY CARALARM SYSTEM (has a mobile calling function) has RINGTONE4
...etc.
B) MODE
Every unknown number is silent or ignored
Every other group than MY CARALARM SYSTEM is silent or ignored
MY CARALARM SYSTEM is ringing and answered (at night while I'm sleeping I want to receive just the call from my car's alarm system)
It's just a simple thing that a lot of phone's using. (Nokia & others)
I hope somebody understands my problem and knows an apllication with the ability I wrote above.
Thx
I think (not sure!) that you need a combination of two programs:
JGUI My Phone Profile AND IA Caller ID (OR Caller2picture)
Tekflow said:
I think (not sure!) that you need a combination of two programs:
JGUI My Phone Profile AND IA Caller ID (OR Caller2picture)
Click to expand...
Click to collapse
THanx the answer but I'm sure (not think) that I don't need the combination you wrote because My phone profile can switch just sound profiles with setting the ring volume or vibrating, IA caller ID can add a picture to a call, Caller2picture can add a ringtone and a picture to a call.
But I need what I wrote upper, please read it perfectly, because it is something different.
I need a software that has the ability to verify a caller-group and for example you can reject all number/call except the caller-group you set like with Nokia phones.
ANYBODY DOES UNDERSTAND WHAT I WANT???????
Maybe because I'm from Hungary and my english is not so well..... :?
My Phone Profile 3.1
My Phone Profile 3.1Full
Reg Code: TMPP-1177-JGUI
Have a fun!
If you have an XDA II, you don't need to get the IA Caller ID because it's already on the XDA II. IA Caller ID is called Photo Contacts in the XDA II.
Caller2picture can add a ring tone to a group. Whenever you want to reject a specific group, give it a silent ring tone.
@VHS: bad boy... i don't think that this should be made public... software worth using is worth bying.
hehe ...bad not bad, but apart from that a/m ...
discussion has been pretty much interesting to me as to sound profiles etc, I have been also looking for some time for software allowing for easen phone handling
regards and Happy New Year,
monika
Finger Clix
Check this:
http://www.imaginet-software.com/index.aspx?p=fingerclix_en
It is the best phone dialer ever!
thank you
I wolud give it a try
regards,
monika
:? :x :evil:
So..Nobody understands what I want.
OK.
Tekflow:
Thanx, but I know that I can set a silent ringtone for a group with one of these softwares. But I NEED SOMETHING DIFFERENT:
I have a car within a mobile-phone-alarm-system. If somebody does something with my car, this mobile (in my car) calls my mobile phone which is with me. So, usually (always) I switch off my phone by night. But if I switched off my phone I would never know my car's calling. That's why when I had a Nokia7650 I can set a profile called Night-profile which has the settings with all calls + all groups has a silent ringtone and my Car-alarm-number has a loud-sirene-ring. That caused when somebody called me except my car my phone was silent. When my car called it ringed with the highest level. And if somebody wanted to stole my car I had heard it. But not now. Because I don't want everybody to call me from 6 a.m., that's why I switch off my phone, but if I switch off my phone I can't hear if my car's calling me.
That's what I can't set in my XDA2.
With no any of your suggested programs.
I know all of them, and I know none of them has the ability I wrote upper.
SO........SOMEBODY UNDERSTANDS WHAT I WANT TO SAY SINCE DEC.05.???????????????????????????????????????????????????????
p.s.:I think so that FingerClix is the best dialling program for the XDA (I use it), but I need another thing, not just for dialling or to give a ring volume for all numbers and groups. My phone profiles can set just a general volume and vibrate settings without any choice to give a different volume for just one group or one phone number like Nokia.
(Maybe since dec.5 there's an update for MyPhoneProfiles or for the others and they have expandable ability?)
I (hopefully) understand what you talking about (have had a Nokia for years...), but i'm not aware of such a tool at this time for the MDA/XDA.
regards,
If I understand you: you need a program that gives you the opportunity of turning off the sound of the telephone for all incoming calls except one number or one group of numbers, or, better, to make call barring for all calls except for one number or one group of numbers (some kind of filtering). I also don't know if this kind of program is available for the Pocket PC Phone. Anyone on the forum aware of this ?
anybody has version 5?
I think what Tuningszocske want is something like Blacklist in Nokia Symbina phones. I know of a Chinese program call CallerFirewall, it allows one to add contacts to black or white list, you can choose to block all contact in black list, receive call only from white list or block all incoming calls etc. This program is compatible with dopod686、O2XDA、T-Mobile、and LegendT108.
Hi guys can u tell me some software for have a call filter options? I need block incoming call, allow only 5/6 specific contacts and block the rest, etc.
I have tryed magicall on diamond but i have always an error "the service did not start"..., i have also an error with call firewall...
grrrr!!!
deffez said:
Hi guys can u tell me some software for have a call filter options? I need block incoming call, allow only 5/6 specific contacts and block the rest, etc.
I have tryed magicall on diamond but i have always an error "the service did not start"..., i have also an error with call firewall...
grrrr!!!
Click to expand...
Click to collapse
callfirewall?
You can try Photocontact Pro
smartblock 2.3
I use Call Block 1.17 from WISH Solutions.
I can't say for sure that it's the best, but it does the trick for me to get rid of all telemarketers who just keeps calling
deffez said:
Hi guys can u tell me some software for have a call filter options? I need block incoming call, allow only 5/6 specific contacts and block the rest, etc.
I have tryed magicall on diamond but i have always an error "the service did not start"..., i have also an error with call firewall...
grrrr!!!
Click to expand...
Click to collapse
Here is a solution for this problem on mobiion forum: http://www.mobiion.com/forum/index.php?topic=314.0
thank you mr.
It's a shame that you cant't get MagiCall to work on your Diamond. I have tested a lot of different callblockers but MagicAll is by far the best imho...
i'm using callfirewall... works fine.... now i can forget calls from my ex-girlfriend u can find it on sharemobile.ro.. just search for callfirewall
I tried Phonegate on my HD2 and surprise (!) - works like a charm! I tested many other apps but they either missed the first ring, or they were too complicated for me to configure.
p.s. I see this is a very old thread but it is still topical
Results for 3 Call blocking programs on HTC Touch Pro: AT&T
I've tried 3 different call blocking programs so far on my HTC Touch Pro (on AT&T):
Smart Block
SynergeTech
MagiCall
I've experienced the same problem with all of them: a couple times a day, they apparently crash the phone's ability to dial out - requiring a soft reset of the phone.
I'm assuming this has less to do with the programs and probably more to do with my particular config:
* Win 6.1 5.2.20771.1.1.4.6 (AT&T bloatware and TF3D removed)
* SPB Mobile Shell 3.5 for the interface.
Anyway, there's my report for what it's worth.
MagiCall did seem to be the best program with the most options, and it worked to block incoming calls - but the 2-3 times a day dial-out issue is worse than the 2-3 times a week robocalls.
PS:
AT&T/Verizon/Sprint and all providers really should offer a blacklist function as a STANDARD feature with their services. Robocalls are becoming more and more of an issue, and the Do Not Call List is a joke. Hell: I'd even shell out another couple bucks a month for this service if they really wanted to nickle and dime for it - which they probably would.
try this
Code:
http://riaysoft.perso.sfr.fr/en/?Windows_Phone:Phone_Call_Blocker
I spent a couple hours sorting through blog posts, downloads, cabs, blah blah blah... with the goal of getting my forsaken Treo Pro (WM6) to use VOIP through my office's SIP/Asterisk setup.
To save you all some headaches, here's the distilled version of what I found to be the best combination of software and quick hints for install:
I started with this blog post, to give credit..
http://voipguides.blogspot.com/2008/05/voip-sip-client-for-windows-mobile-6.html
But I used different software... so I've included a zip with the package of all the stuff I installed to make the damn thing work.
1) Install all of these:
- voipdrivers.cab
- custelvoip.cab (works better than MajikVOIP.cab)
- sipconfig.cab (originally named SipConfigTool_2_0_1.CAB)
- audioroute.cab (from http://www.teksoftco.com/index.php?section=freeware)
I've also included setupvoip.cab .. which is a fancier SIP setup tool, and may work better than sipconfig... but I used sipconfig originally, so that's what I'm writing up here.
2) Restart your phone
3) Run sipconfig ... enter all of your sip configuration details, and also use the menu option to enable VOIP over 3G if you desire it.
4)Now go start -> settings -> personal -> Phone. Choose ther Internet Calling tab. Set the option for "whenever available".
5)On the main/Today screen you will see a phone icon with description VOIP ( you entered name of provider VOIP in (step 4). It'll show you the status of whether or not it has registered with SIP. A Hint, you might need to trick the phone into connecting to 3G first... e.g. by browsing the web... otherwise WM6 at least doesn't seem to auto-connect to 3G for SIP.
6) After connecting using 3G or wifi, You will see the status displayed as VOIP: Available.
7) You can now make calls as normal, or receive calls in.. and everything is routed through VOIP.
8) You'll notice that many WM phones will route the audio through the rear speaker (annoying) .. which is why you installed audio router from teksoft... it adds a little icon on your top system tray to let you change between earpiece and rear speaker for audio. There's a bunch of audio switchers out there. This is the best one by a mile. And it actually works.
Cheers,
Andrew Eross
Thanks for your effort. Similar tool is already posted as Schap - Setup voip Tool -
http://forum.xda-developers.com/showpost.php?p=1364611
Thank you!!!
I've looked around for a guide as clear as yours. You've the best guide all around... Thank you a bunch...
Thanks for your great job. I new on Windows Mobile so I need a lot this kind of help.
I download and followed your installation procedure on a HTC 3G+, T3238 (chinese version of the HTC 3G, manufacturer HTY Taiwan)
Works well, Hope others also will be successfull
By the way, is there an also simple way to sending DTMF tones for remote control of my answering machine? When I try to send numeric keys after the call is connected it looks like I start a new connection with numbers actually for remote control of my answering machine.
Hi, I'm also in the club that has browsed hundreds of post looking for a setup of VOIP and also looking for a solution on good incoming sound level when using Voip on phone. Your files solved all my problems!
Phone: HTC HD2 Norwegian with Rom 1.66. Use the Norwegian company www.iplink.no for VOIP at home / office and (now) on my mobile phone.
Made my own ipdialplan.xml which can be found attached to this post.
Done some testing calling people through Voip: after approx 1 minute the connection falls down. I looks like I'm still connected to the other part (interface shows that a call is going on) but none of us can hear the other part. I then have to cancel the call in the phone interface. Make new call to same person, after approc minute the connection goes down again...
Is there some kind of registry setting that controls this "timeout"?
Hi, this tools does work also on windows mobile 6.5?
I know that on the HTC Fuze some of the wmvoip.cab installs breaks the GPS - anyone test this yet?
THanks!
does this work on hd2
I've done everything you said, but I can't find the option to show internet calling is available. I have Kumar 1.5 installed, and am about to try another ROM (maybe Laurentis, the SIP drivers are cooked in). What are you running?
shah_vm said:
does this work on hd2
Click to expand...
Click to collapse
yes, it does!
Best Voip All in one solution. Try This
http://forum.xda-developers.com/showthread.php?t=596682
I tried last night to no avail. I am guessing that using a WM6.5.x ROM stops me, because I can't access the right settings (start-settings-personal-home or phone) because my settings button takes me straight to the black screen of text version. I even tried to go to a 6.5 ROM (cooked with VOIP drivers in), and even then I couldn't get the VOIP phone icon to appear on the today screen. Every time I selected it from the Internet tab in the setting, it would just ignore my changes.
I would love to get this working with a nice cooked 6.5.x ROM, and am not giving up yet, but man is this frustrating. As a side note, I am learning lots about the workings of WM.
sidelait said:
yes, it does!
Click to expand...
Click to collapse
thanks for the reply. i have also installed i was able to receive incoming call but unable to make outgoing call. are you able to make outgoing call?
Okay, I feel like an idiot, but I figured out how to enable the internet calling tab on my HD2. I am still apparently learning lots about WM6.5. After I disabled Sense, I could add tabs to the today screen. I did everything right, but the voip tab just either says searching or not active. And it somehow disabled my data connection. Not sure anymore, almost through trying ROMs. Is everyone else running this on a stock ROM, or are there certain features that interfere with this?
VOIP almost working
I've implemented Internet Dialing and have SIP configured my my provider and I am able to receive calls. But, I notice that when I dial out a "9" is put in front of the number I'm dialing making it impossible to dial a number correctly. How can I change this?
forepj said:
I've implemented Internet Dialing and have SIP configured my my provider and I am able to receive calls. But, I notice that when I dial out a "9" is put in front of the number I'm dialing making it impossible to dial a number correctly. How can I change this?
Click to expand...
Click to collapse
You need to edit your ipdialplan.xml. It's in your windows directory. Basically it is set up by default to dial a 9 and in area code 425... If you look at it you should see where to edit it... There's also a utility knocking about here to set up a basic one for other countries...
Can't svae ipdialplan changes
I can open Total Commander find the file and make the changes to ipdialplan.xml by taking the "9" out of the 10 digit plan and the 7 digit plan, but I can't save the changes. I get "Error, could not create file" every time.
It's either open or write protected. Edit on the PC. Copy it over with a different extension. Rename the original, and then rename the new one to the right name.....
I have this very strange problem.
I have tried to install all this, but it works only partially.
Outgoing calls work and the receiving party can hear me. However, I don't hear them. Also, on incoming calls my phone doesn't respond at all.
Does anyone have any idea what is the problem?
I'm having a Topaz @ WM65.
Hi all,
I am a happy new user of the HD2 and until now I am very happy.
I still have a question for all of you:
I have activate Reject call with SMS (and check send automaticly), but I can only do this when my phone is unlocked... is they a tweek, or a reg hack to change this and be able to automaticly send a repley without having to unlock the phone first?
thanks all for your help.
Am I the only one havng this problem?
Same question here: did you find any solution for this?
I'm still searching...
_rob_ said:
Same question here: did you find any solution for this?
I'm still searching...
Click to expand...
Click to collapse
Same here, anyone a solution?
Thanks in advance!
ranney said:
Same here, anyone a solution?
Thanks in advance!
Click to expand...
Click to collapse
With me everything is working properly when the phone is locked only on the screen touch a send a message and that's all
Hmmm,...I have it checkd but I don't believe anybody ever received an sms from me when I reject a call. Weird,..
Try QSMS To Buddy:FullFeatured free app from android market
It takes care of the situation you have explained. It not only allows you to send sms during rejected incoming calls. But it also allows the same when someone else rejects your calls (outgoing rejected): a feature never seen before.
Interestingly you have ability to modify the messages right when you are rejecting the call and sending the sms. e.g. instead of saying "call you back later" you can change it to "call you back in a min"
Demo at youtube: search : "QSMS : Quick SMS To Buddy Android App by Onion Systems"
Regards,
AppUsabilityExpert
Reject++
If you are looking for an app to let you reject incoming calls with predefined or custom SMS and setup a reminder to return a call as well..
so check Reject++
You can:
- Reject a call with SMS, Reminder, Or Both.
- Convenient Slider on top of incoming call screen, slider it up and go with Reject++
- Smart SMS Templates with "Tags"
- Smart Reminders Scheduling Engine.
- Works with mobile screen locked or OFF
- Notifications works no matter if the app is active or not.
Check much more Features & Screenshots for Reject++
QText app has been on my Fav list
QText is the most professional application in the category. I tried many apps and none of them allow you to do below two things
1. Change the message before sending it: e.g. send "will call in a minute" instead of "will call you back later"
2. Send text for outgoing calls as well.
Auto text widget is also included.
SmartApps said:
QText is the most professional application in the category. I tried many apps and none of them allow you to do below two things
1. Change the message before sending it: e.g. send "will call in a minute" instead of "will call you back later"
2. Send text for outgoing calls as well.
Auto text widget is also included.
Click to expand...
Click to collapse
Hi everybody,
I had this function before upgrading to JB 4.1.2, but nolonger now?
I wonder if someone can tell me how to get it back.
Thanks.
Works fine on WM6.5 & if need enhance the possible options further then Maicall is probably the answer as can handle sms replies as a whole & individually per number etc & rules can be listed in order of checking.
Far better than any of the Android options I have tried & reminds me why my daily work device is still an HD2 on WM6.5.x .
Hi
Is there an app that will allow me to either blacklist and reject calls, or direct them to a virtual voicemail box ?
Virtual VM being within the phone not the carrier ?
I had a similar app on my Nokia N95 8GB.
Thanks
You don't need a seperate app. Just add them as a contact and select Send to voicemail. Not tried it though.
norm2002 said:
You don't need a seperate app. Just add them as a contact and select Send to voicemail. Not tried it though.
Click to expand...
Click to collapse
I use that a lot problem is your phone still rings then it goes to voicemail, would have been lot better if it went straight to voicemail...
saayinla said:
I use that a lot problem is your phone still rings then it goes to voicemail, would have been lot better if it went straight to voicemail...
Click to expand...
Click to collapse
Maybe you can create an mp3 file of silence then set that as the ringtone for those contacts you want to send to voicemail. Will that work?
I just came here about to post the same thing!
Individual blocking on a case by case basis is fine. But not powerful enough. I came from Nokia E series and the only thing I miss is Advanced Call Manager.
If you look up this program, what you will find is that it has some great features:
- You can set up many lists then just tell the phone to use the list for a whitelist or blacklist.
- You can block all unknown numbers.
- Block everyone. Essentially turns phone into pager.
Even blocking calls is done in a variety of ways.
- to voicemail
- to busy tone
- block and send sms
- divert to various numbers depending on mode
Etc.
As you can see, it is a very powerful program that is set up very easily and I never had any complains, only praise. I often used it when I was writing when I would only want my partner and my mother to contact me and would block everyone else.
I have been looking but can't see anything as powerful or as highly rated. What I've found are:
aFirewall
Extreme Call Blocker
Phone Armor C.
But these seem either basic or don't work reliably.
Cleargrey said:
I just came here about to post the same thing!
Individual blocking on a case by case basis is fine. But not powerful enough. I came from Nokia E series and the only thing I miss is Advanced Call Manager.
If you look up this program, what you will find is that it has some great features:
- You can set up many lists then just tell the phone to use the list for a whitelist or blacklist.
- You can block all unknown numbers.
- Block everyone. Essentially turns phone into pager.
Even blocking calls is done in a variety of ways.
- to voicemail
- to busy tone
- block and send sms
- divert to various numbers depending on mode
Etc.
As you can see, it is a very powerful program that is set up very easily and I never had any complains, only praise. I often used it when I was writing when I would only want my partner and my mother to contact me and would block everyone else.
I have been looking but can't see anything as powerful or as highly rated. What I've found are:
aFirewall
Extreme Call Blocker
Phone Armor C.
But these seem either basic or don't work reliably.
Click to expand...
Click to collapse
For WM is avalible program which allow you all this. It is called MagiCall I hope that for Android is avalible something that. I hope that Im not do mistake when Im order Desire because looks like Android is not good as WM can be(missing a lot of features which are normal: USB sync like activesync, blocking calls... )