Opal Cabs - Windows Mobile Development and Hacking General

I'm currently working on extracting OEM apps and converting them into cabs from the HTC Opal ROM dumps.
So far, I have uploaded:
Arcsoft MMS
AudioManager 2_0_18192129_0
BootLauncher (Launches applications at startup, some applications require it to function)
Connection Setup 1_5_35082_1 - Requires BootLauncher
Phone Skin 3_0_32437_0
Opal SIP (English only) - Requires BootLauncher
Thanks to herg62123, the following are also available:
opal title bar.4.40.0.0
OPALCalculatorSkin
OpalCommManager 2.7.1.8.FIXED
OpalEndKey 1.2.35084.1.FIXED
OpalEnlargedStartMenu.1.2.34828.4
OpalFlashLite3.1
OpalKeyboard.1.5.32288.0
OpalRadio
OpalRandomAccess 4_1_18201232_0
OpalStreamingMedia.3.0.18191427.02
OpalUSBtoPC.2.2.18191228.0
OpalVoiceRecorder.1.10.18181632_1
OpalVolumeControl.1.6.18192130.0
Please be aware that these are the work of herg62123 (the magician behind Manila 2D) and are not mine. I haven't tested them myself yet, but I assume they work.
And I'm working on the rest. Some, such as Manila 2D need hex editing to work on all devices, and I'm not able to do that, but most should run on most devices.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
All of them can be downloaded from here.
If anyone has any particular requests, I'll try and deal with them before the rest.
I've done this voluntarily, but please donate if you see fit.
​

l3v5y said:
I'm currently working on extracting OEM apps and converting them into cabs from the HTC Opal ROM dumps.
So far, I have uploaded:
Arcsoft MMS
AudioManager 2_0_18192129_0
BootLauncher
Connection Setup 1_5_35082_1
Phone Skin 3_0_32437_0
And I'm working on the rest. Some, such as Manila 2D need hex editing to work on all devices, and I'm not able to do that, but most should run on most devices.
I'll upload some screenshots later...
All of them can be downloaded from here.
If anyone has any particular requests, I'll try and deal with them before the rest.
I've done this voluntarily, but please donate if you see fit.
​
Click to expand...
Click to collapse
i have some cabs for you if you want them

herg62123 said:
i have some cabs for you if you want them
Click to expand...
Click to collapse
Sounds good.
What cabs do you have? (I've got most of them, but I need to tweak some things...)

What does the BootLauncher do?

met3ora said:
What does the BootLauncher do?
Click to expand...
Click to collapse
I should've explained... BootLauncher runs at start up, and loads things like the Volume Control into RAM.
It's needed for correct operation of some of the programs.

l3v5y said:
I should've explained... BootLauncher runs at start up, and loads things like the Volume Control into RAM.
It's needed for correct operation of some of the programs.
Click to expand...
Click to collapse
check pm I3v5y

Hi thanks for put the cabs in one post its very useful.
I tried the Opal Radio from herg62123 and sadly dont work, say something like the "uncertified signed". I must to say that its the same that diamond with resolution 640x480 and in the cab dont figure the DLL(FMS.dll and FMS_api.dll) and BTS(FMInit_2.bts, FM_on_2_0.bts, FM_on_2_1.bts). Well I add this dll files and run but only the first screen (the warning screen for the headphones) when I want to past to second screen(the FMRadio app) appears a popup of unexpected error.
I dont know if needs bootlauncher or edit the exe with Hexeditor.
Please can help me?
BTW: my suggestion about the FMRadio its dont work with the diamond one unless you know how modify the FM_skins.pkg, I suggest work with the "Touch HD" one because this dont use anymore the FM_skins.pkg and works with PNG simple files.

thanks for the cabs.
I was wondering if you could also give as the camera

Does anyone know if theres a way to change the smart dialing in the opal phone canvas so that when youre using smart dialing and have only pressed say 3 numbers, it will dial the number at the top of the smart dialing list rather than the 3 numbers you have pressed?
For example say you have a contact Mike
you dial 645 (mik)
And your smart dial list looks like
Mike C.
Mike L.
Mike Z.
and when you hit the talk button rather than dialing 645 it dials Mike C.
It drives me crazy having to hit down then talk as opposed to just talk. I was able to fix this issue on the htc dialer by using the kaiser smart dialing dlls, however I do not see them anywhere in the opal phone canvas so Im assuming smart dialing is embedded and I'm unsure as to how to go about solving this issue.

jade top bar icon cab, and jade comm manager 2.7.2.5 cab...both are below for downloading

Opal SIP (EzInput) compatibility issues
l3v5y said:
Opal SIP (English only) - Requires BootLauncher
Click to expand...
Click to collapse
No, it doesn't. It has a registry configuration for it, but it's not necessary at all.
Also, since the Keyboards can already be downloaded here, with customized settings for all HTC hardware configurations, you should note that with your cab, extracted from a device with No Hardware keyboard, it won't be possible to:
1] Use hardware keyboards on Nike phones
2] Customize hardware keyboard layouts on Full Keyboards phones and get T9/ABC on them.
As well, I can't even assure you or anybody else that the additional Language Packs I've made will work without issues. The library has several bugs that had to be patched, and it won't even be possible to enable some languages on your configuration.
BJK

DupinBJK said:
No, it doesn't. It has a registry configuration for it, but it's not necessary at all.
Also, since the Keyboards can already be downloaded here, with customized settings for all HTC hardware configurations, you should note that with your cab, extracted from a device with No Hardware keyboard, it won't be possible to:
1] Use hardware keyboards on Nike phones
2] Customize hardware keyboard layouts on Full Keyboards phones and get T9/ABC on them.
As well, I can't even assure you or anybody else that the additional Language Packs I've made will work without issues. The library has several bugs that had to be patched, and it won't even be possible to enable some languages on your configuration.
BJK
Click to expand...
Click to collapse
I have to disagree. If I am looking at the package correctly, the SIP changer requires the bootlauncher.
I'll try playing with it later and return more detailed results

mbarvian said:
I have to disagree. If I am looking at the package correctly, the SIP changer requires the bootlauncher.
I'll try playing with it later and return more detailed results
Click to expand...
Click to collapse
SIPChanger does, but you can set the keyboard defaults etc without it, or you can load SIPChanger via a shortcut in startup. I prefer the bootlauncher method as I have it cooked in, but it's not absolutely required.

Does the Opal keyboard have smart dialing capabilities?
Specifically, the one included here:
http://forum.xda-developers.com/showpost.php?p=2900174&postcount=7794
Thank you.

So How Do I Change The Language On The Keyboard I Tried These Cabs http://forum.xda-developers.com/showpost.php?p=2735963&postcount=3
But It Dont Work
Do I Need SIP???

wisniak said:
Does the Opal keyboard have smart dialing capabilities?
Specifically, the one included here:
http://forum.xda-developers.com/showpost.php?p=2900174&postcount=7794
Thank you.
Click to expand...
Click to collapse
As that ROM appears to be a blackstone (not Opal) ROM, I have no idea. I'd guess it does as all the shipped dialers I've extracted do.

RaffieKol said:
So How Do I Change The Language On The Keyboard I Tried These Cabs http://forum.xda-developers.com/showpost.php?p=2735963&postcount=3
But It Dont Work
Do I Need SIP???
Click to expand...
Click to collapse
Use the SIP from that thread.

l3v5y said:
As that ROM appears to be a blackstone (not Opal) ROM, I have no idea. I'd guess it does as all the shipped dialers I've extracted do.
Click to expand...
Click to collapse
Thank you.

mbarvian said:
I have to disagree. If I am looking at the package correctly, the SIP changer requires the bootlauncher.
I'll try playing with it later and return more detailed results
Click to expand...
Click to collapse
You disagree because you don't know the technology well enough.
If you look at the package correctly, you'll see that BootLauncher is required *only* if you need the SipMenu. But since the SipMenu won't be available for pre-Manila2D phones due to driver issues, you don't need it at all.
In the standard configuration, the SIP changer already starts via the link in the Startup folder, so the registry configuration for it is redundant.
Packaging doesn't mean just throwing all files in, you should already know it by now.

Regarding Flash 3.1
Hi, i installed your flash 3.1, however, it does not appear in my programme list. Any idea what happened? Thx, i am currently using wm6.1, opal port rom r2 lite.

Related

[ROM]http://forum.xda-developers.com/showthread.php?t=344533

THREAD MOVED
http://forum.xda-developers.com/showthread.php?t=344533
http://forum.xda-developers.com/showthread.php?t=344533
http://forum.xda-developers.com/showthread.php?t=344533
http://forum.xda-developers.com/showthread.php?t=344533
http://forum.xda-developers.com/showthread.php?t=344533
http://forum.xda-developers.com/showthread.php?t=344533
http://forum.xda-developers.com/showthread.php?t=344533
http://forum.xda-developers.com/showthread.php?t=344533
http://forum.xda-developers.com/showthread.php?t=344533
http://forum.xda-developers.com/showthread.php?t=344533
http://forum.xda-developers.com/showthread.php?t=344533
THREAD MOVED
Thanks Patr!K​
New HTC Duo Touch Apps for our..... Elfs, Artemises and whatnots.
Im did not make these Apps, I didn't even make them Work (just parts).
This thread is another good example of the good people roaming XDA helping out where they can to get the newest stuff on Phone's that might never see these apps officially.
So please think about the free time people spend in doing this and think about that only constructive and elaborate explanations of problems can help get you a better app. Or even better maybe a solution
Now.....................
The coolest would be HTC Album.​
really nice new way to show of your fav pic's
Now it will take a bit of practice to get zooming but
Zoom = Not to quick and full clockwise circle.
Zoom Out = Double Tap
Screenshots
HTC_Album_RUS_and_ENG.rar
Thanks to the Link from JUVS.
Here's a fixed English version with the Help files included.
Here's a Multi Device Cab installer. (By bfjosue)
View all Pictures on SD Card settings
(other trick is to rename My Pictures on SD to _My Pictures)
Here's a version (CAB) that installs two links in Programs\Multimedia.
One for Landscape one for Portrait. Also the default close action is to close app from Memory. It installs dll's, Exe and Help file to storage card. And the Skin Files, link to help file and Graphics go to Windows Folder. This saves 50% of total installation to ROM.
OEM package MM WWE.
Not working on Wizard WM5 and one report of this not working on Wizard WM6.
Artemis and Touch have been confirmed working.
HTC Random Acces​
New Shell around Contacts sort of like PocketCM contacts.
Download OEM Package Mapped to Right SoftKey
Manual Install Instructions
Random Acces That replaces Default Contacts without Softkey Mapping Cab Installer. (By evermick)
I'll be making a Cab installer Shortly. (still had no time for this)
Endkey
Propably the most boring App from the bunch.
Screenshots
OEM Package for Endkey
English Cab For Endkey By cerede2000
French Cab For EndKey By cerede2000
HTC KeyBoard
Good new way to enter text quicker.
Cab Installer WWE
OEM Package
Extra Language Files
(just copy your needed files into Windows Folder on Device)
If you want to install The Full 40 keys Keyboard without t8 prediction take a look at this thread.
http://forum.xda-developers.com/showpost.php?p=1627775&postcount=280
New Cab installer with all the languages working. (mmblanco)
Action Screen
Not as useless as EndKey. It gives you screen with some handy stuff to do.
This is supposed to pop up when you slide the DUo Touch Keypad open so it might be that you don't need the settings files.
Screenshot
OEM Package. (not fully working yet, At least not on ELF it might run on Artemis)Updated version
New Version of Action Screen OEM
Cab Installer Link
(please test and verify working devices)
Network Folder Plugin​
Not sure it comes from Duo Touch but it's cool anyway.
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
JUVS HTC Network Plugin_mui_0409.cab
New Keyboard Link coming
Other Files Maybe needed:
Duo touch.dll (screwed up my ELF BTW not cooked but installed through Cab)
Skin.XMl files for AS and Some Dll's
For those that want to check the other available language just download this package from this thead.
http://forum.xda-developers.com/show...&postcount=112
TNX to a very special friend of XDA, To Tom_Codon, GULLUM, Koala996, Me , whistler-nl, cool6324, theloanranger, jizy, heavenhim, cerede2000, maxniper, bfjosue, TheLoon, evermick, Again GULLUM ( he's done the biggest and best job with his contributions, respect), HMA4, mmblanco, Xplode, I'm now going to test Cab installer based on 's OEM package for Actionscreen. And make new Cab for Keyboard WWE.
And other good news an regular ELF has been spotted with the new Apps so there might be more compatible files in that one.
Please report wrong or updated links as these come from different posts in the thread.
How to uninstail this? It's just deleting from programm list!!!!
It works, almost.
Once you map "lock" to the long press, it seems that no other settings you try will overwrite it.
Used SoftKey to restore Contacts rather than EndKey on the screen, but EndKey is still in control of the long keypress on the right hardware key.
Tried to un-install from Settings, couldn't complete the uninstallation.
Lock is the default behaviour for Longpress of Right SoftKey
So setting Endkey up for that behaviour is pretty useless.
Yes you remove it from the Remove Software list (Post before that)
Nope Un installed great here, but you probaply meant that it kept the Longpress of Red Key still locking device with that.
You must have access to the touch dual....
How about copying the new HTC keyboard CAB's...
PLEASE !!!!!
Installed this app on my touch but i'm not sure why i should'nt remove it?
The airplane mode is'nt used that much by 99% of the touch owners, to lock the device we have the red phone button, to terminate a connection one could use the icons on the top bar, the vibrate function can be easely accessed when you have the 5 or 6 tab home (see last screenshot) and finally the settings wont allow you to customise it (yet)?
whistler-nl said:
Installed this app on my touch but i'm not sure why i should'nt remove it?
The airplane mode is'nt used that much by 99% of the touch owners, to lock the device we have the red phone button, to terminate a connection one could use the icons on the top bar, the vibrate function can be easely accessed when you have the 5 or 6 tab home (see last screenshot) and finally the settings wont allow you to customise it (yet)?
Click to expand...
Click to collapse
I totally agree it's a useless app, but you know how some people can be, they always want the newest. And i think officially it's suposed to replace the long press of Red Phone button An the ither hand the right soft key set to contects is also a totla waste of softkey button .
Oh and for the previous post, there are no cab's, believe me i would have posted them first thing.
Ot the moment the Duo Touch doesn't have Ext Rom like Kaiser it seems. Which mean most of the extra apps are not installed from ext rom, which means no cabs. It's just a challenge to get them out before HTC releases it
I really hpoe the keyboard is possible to port.
And no i don't have acces to a Duo. I'm actually someone comes with a solution and mybe some devopers figure out how to chenge the functions.
Ringtone of 2 clicks vs 2 clicks.
Airplane 2 clicks VS 2 clicks but endkey is faster. (faster even when its mapped to red button)
Vibrate 2 clicks VS 2 clicks but endkey is faster. (faster even when its mapped to red button)
LongPress 1 hold vs 2 Clicks.
Terminate Connections 2 clicks vs not working (again hope that by putting up what i have that somone finds out why)
It's not super usefull but it's new.
Also don't like the fact that it doesn't run from SD as it looks for graphics in Windows Folder and it again fills up windows with even more files.
The big thing I'm looking forward to from the Dual is the new zooming/fat button taskbar. Hopefully HTC will carry that over to the regular Touch too.
Anything that'll help keep the stylus in its slot is a big deal to me.
Looking at history of HTC and Win Mobile that doesn't seem likely that's why it's so great there are people here trying to rip it out and make it compatible.
i second noonski they dont provide newer ROMs or apps from the newer phones officially so someone has to rip it.....
I third that.
(Quote)
Wholy Cow Batman It Looks Almost To Easy,.....
(End Quote)
Updated First thread with Keyboard to.
I like the keyboard, but , Since he install?
Thanks
How can i install the Touch Dual Keyboard????
Thanks
bieza said:
How can i install the Touch Dual Keyboard????
Thanks
Click to expand...
Click to collapse
the zip is for cooking roms ... you can try to cook your own rom or you can try to find a rom with the HTC keyboard in it.
http://forum.xda-developers.com/showthread.php?t=331155
this one is the best rom I have ever known .... ! but it is a WWE rom.
the HTC Keyboard is also WWE .. I think that you can't have the german keyboard working.
bieza said:
How can i install the Touch Dual Keyboard????
Thanks
Click to expand...
Click to collapse
There is a german version of Keyboard to BTW
But at the moment i din't think that putting a lot of time into an actual cab installer was worth it as the Keyboard just isn't finished yet.
That's why i wrote
If some one wants to create CAB's go ahead.
Click to expand...
Click to collapse
You could also just trow all files into windows directory and add the Registry settings manually found in the rgu file but i would advise it.
(unless you like doing this of course)
koala996 said:
the zip is for cooking roms ... you can try to cook your own rom or you can try to find a rom with the HTC keyboard in it.
http://forum.xda-developers.com/showthread.php?t=331155
this one is the best rom I have ever known .... ! but it is a WWE rom.
the HTC Keyboard is also WWE .. I think that you can't have the german keyboard working.
Click to expand...
Click to collapse
Found One Bug Dammit.
So you didn't get French Keyboard to Work then?
Noonski said:
Found One Bug Dammit.
So you didn't get French Keyboard to Work then?
Click to expand...
Click to collapse
which bug ??
... mmh.. well.. it is working but there are some ... weird things !
I'd like to know if you have the same issue with the ENGLISH keyboard.
(I have both English and French keyboard.. it's nice... I just have to switch language when I want to write in french or english greaaat).
There is no french dictionnary .. "weiiird" preloaded... so it reacts like the 123 keyboard and I have to choose "new word" all the time.. to create every word ! I have not the same issue with the english dictionnary .. WEIRD ! I don't think I need a file for that.. but maybe there is something I need to change in RGU but I don't see where... grrr.
I have put the Keyboard as default Sip and guess what... it causes issue ! grr... when I have put it as default .. both Keypad and Keyboard were not usable... (no xt9, abc and 123 choice.... just the "Sym" mode and can't go back to other mode... GRRRR) but in fact....I'm not sure that the issue comes from there.. because it appears after a soft-reset... and guess what ... the next soft-reset has no issue... and the next soft-reset makes the issue appears again GRRRR what the **** ?
But ...... there is something REALLY annoying with the keyboard is that I just have 3 buttons in the "Sym" mode ... yeah....
"shift" (bottom left) "sym" (at the bottom center) and "<-" (at the bottom right) ..... i have (.. let me count that) ... 34 empty buttons ! why???? .. I have the same issue with French and English keyboard...
I need more tests... but I'm not sure if I can solve those issue.. but when the keyboard is working it's reallyyyy nice !
Can you test the "sym" button and see if you get the sym panel working perfectly ? thanks !
i need to know how it works for you (the keyboard and keypad)
I want to know if you have something using "SYM" button ...
and I want to know if you know what to change for having the french dictionnary ... I have the dictionnary for english when I'm in english keyboard... but when I go to french keyboard I have nothing !! grr... and now it does not save my own worrds... GRRR... don't know what to do
I'm putting priority on SPC fixes first.
Symbol Pad is working Fine Here but i think i know what you mean.
And there might be a sollution.
hay all
Does the Touch Dual Keyboard come with an international T9 ?? Thinkin more of the DANISH lang. any1 knows if it is included ?
Thanx
Cobra2 said:
hay all
Does the Touch Dual Keyboard come with an international T9 ?? Thinkin more of the DANISH lang. any1 knows if it is included ?
Thanx
Click to expand...
Click to collapse
Nope it wasn't in the early version i have.

Black Skin Pack (Dialpad / Comm Manager / Theme / Slide2Unlock)

I would like to present my Black Skin Pack. I did not make the programs, but I modyfied most of them to give the appereance i want.
The Last of that Projects was the creation of my Comm Manager Skin. I hope you'll like it. I took Shaps Kaiser Comm manager to start the Creation. And it will identify like that in the Installed Programm List.
But have a look by yourself:
Today Theme:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Comm Manager:
Dial Pad:
Slide2Unlock:
Instructions:
For the Slide2Unlock Skin just Copy the files into the GFX Folder and overwrite the original ones. If you dont have that Program you can download it here
If your Rom Cooker has skinned the Pin-Number input, and you want that black just delete the reg-key "HKLM/Security/ResOver/Bitmaps/BaseDll".
I used the PHM Registry Editor
Unfortunatly the Dialpad Skin will switch your Today Skin, too. So you have to switch the Today Skin again after you have installed the Dialpad
File List:
Today Theme:Rapidshare Megaupload
Dial Pad:Rapidshare Megaupload
Slide2Unlck: Rapidshare Megaupload
Comm Manager:Rapidshare Magaupload
So i hope you'll have fun with that Downloads
Important:
The Buttons for the phone being muted were missing in my first release of the Comm Manager, so you should download the fixed file I just uploaded. I first did not realize that because I only tested the functions of Comm Manager itself.
You can help me to improve my Comm Manager if you could get me the answers to the following Questions:
There are some Buttons missing to get all Functions intigrated. So where is the definition of which png belongs to which funktion and how could that be changed.
Maybe the key to that problem can be found in the SCHAPS~1.000 file but i wasnt able to open it correctly. So does sombody know what Filetype the File is and how it can be opend and edited (Notepad gives me nonsense)
Some insight in the Reg Key HKLM\Software\HTC\CommManager\DisableButtonText would be nice. For it is responsible for displaying the Comm Manager in different ways. But with the PNG's the only usable option is the Value 2. Otherwise you got the original Comm Manager displayed. But the Options are quite interresting (0 = Original Setup with Button Text on the Top / 2 = Buttontext on every Button / 3 = No Button Text.). But there has to be a place to where this Key is referring.
Very nice! Thanks for sharing!
Hi
Like your Comm Manager Skin a lot. But I can't download from Rapidshare. In fact, I have problem downloading from Rapidshare 9 out of 10 times. Can you post it in another place for download?
Also, will it override the default Comm Manager Skin such that I need to hard reset to get it back? Cos' I wanna have the option of freeing up my device memory should I need the space for another application. Please confirm.
Thanks! Great job!
Will it work well in english?
I noticed that these weren't in english, maybe a noob question but it does it matter?
Looking good!
Coradiel,
Thank you for this wonder black pack!!!! So great!!!
Thank you for your hard work modifying and uploading! Thank you!
Very nice, can you make a similar skin for Psshutxp
Edit: The fonts in the commanager are too bold, can you change the font please
Sian said:
Hi
Like your Comm Manager Skin a lot. But I can't download from Rapidshare. In fact, I have problem downloading from Rapidshare 9 out of 10 times. Can you post it in another place for download?
Also, will it override the default Comm Manager Skin such that I need to hard reset to get it back? Cos' I wanna have the option of freeing up my device memory should I need the space for another application. Please confirm.
Thanks! Great job!
Click to expand...
Click to collapse
Thnx for liking it. I'll try to provide an other Mirror.
To your second question. The Comm Manager can be uninstalled through the "Installed Program List" in Windows Settings. But if u use the default Comm Manager u can go back too by editing HKLM\Software\HTC\CommManager\DisableButtonText (Value from 2 to 0)
EDIT:
Megaupload Links added
SciFer said:
I noticed that these weren't in english, maybe a noob question but it does it matter?
Click to expand...
Click to collapse
First of all no Question is a noob question. We all had to learn once.
There is no Language File in all of the Skins. MS made the wonderful thing to store them in other lokations and not meld them with the Skin Files since WM5 (i think it is since WM5). So u can use this Package with every Language
plz post in some other site
hi
plz post the files in some other website..i cannot download from rapidshare.
thanks
taiseer999 said:
Very nice, can you make a similar skin for Psshutxp
Edit: The fonts in the commanager are too bold, can you change the font please
Click to expand...
Click to collapse
For i dont now Psshutxp i cant promise you anything. But i'll have a look at that.
For the Fonts: I can't really say anything about the Fonts in your english rom, because i'm not able to get them displayed with my device. But i can tell you that i'm not satisfied with the Button Texts, too. I wanted them not to be displayed, but i cant find the keys resposible for that. There is a reg key in the setup.xml, that seems able to do that, but if i change it the skin is gone, too. If anybody knows how that task is done pleas tell me.
General Information:
There are the PNG files of the Backgrounds and Buttons, the Commmanager.exe and a file I was not able to identify in my cab File (SCHAPS~1.000). Maybe the Key to that Task is in that last file, but i'm not shure which Program I should use to open it properly, because this file isn't mentioned in the setup.xml. Notepad gives me a lot of glyphes beside some readable information. And I'm really not sure what it does (im much better in editing graphics than programmng, actually).
I also would like to know where i can find the assignement Buttons=Tasks so that i'm able to integrate new tasks with new Buttons into the Comm manager
(i would like to integrate voip, for example).
I would be grateful for help
I have problems unzipping the files. (tried the dialpad and the comm-manager).
I tried windows-xp's built in routine and izarc.
Both give error-messages. What is my error?
JueLue
JueLue said:
I have problems unzipping the files. (tried the dialpad and the comm-manager).
I tried windows-xp's built in routine and izarc.
Both give error-messages. What is my error?
JueLue
Click to expand...
Click to collapse
I checked the downloads and was able to unzip them with Windows and WinRAR without problems. I think your download has been corrupted. I think you should try again to download the files.
Beside that I must honestly say that i did not know where your problem is.
Bautiful skins!!! Thnak you!
I can't get the Comm Manager installed
My device says that I don't have the correct systemrights/accessrights.
What am I doing wrong?
Polyphemus said:
I can't get the Comm Manager installed
My device says that I don't have the correct systemrights/accessrights.
What am I doing wrong?
Click to expand...
Click to collapse
Maybe you have an other Comm Manager installed. You first have to uninstall it.
When does the Installation Process stop? During the installation or at the beginning?
EDIT: I downloaded my file and installed it. It is working on my device.
Beautiful skins, thanks!
Just a question, maybe it is not the fault of your skin but I even ask my question here.
How to hide in the Phone Dial Pad the little part displaying contacts?
Indeed I've the keypad from bottom to middle, then a little part of my contacts displaying and then the background skin and my Orange logo.
I never noticed contacts before, is there a way to make them disappear?
Thanks.
Bingoig11 said:
Beautiful skins, thanks!
Just a question, maybe it is not the fault of your skin but I even ask my question here.
How to hide in the Phone Dial Pad the little part displaying contacts?
Indeed I've the keypad from bottom to middle, then a little part of my contacts displaying and then the background skin and my Orange logo.
I never noticed contacts before, is there a way to make them disappear?
Thanks.
Click to expand...
Click to collapse
I think your question refers to the smartdial funktion. Whenever you start dialing, the matches found on your phone will be displayed. I believe that this is a funktion of WM5 and WM6 (programmed by HTC), it appeared in every dialpad skin i tried on my phone (if the skin was programmed for WM5 or WM6 and that funktion is supported by them).
And sorry if i have to say that. My programming skills are very limited so i do not really know.
But there are several reg-keys in the setup.xml referring to the smartdial funktion. The best thing you can do to check that is by using a regestry editor (i provided a link to one in my first post) and edit that keys one after an other and look what will happen (dont forget to reboot after each change). I know, that this is a long process and it cant be seen if u have success by doing that. But that is the way i'm going through all the times I change programms.
You'll find the keys referring to Smartdial in "HKLM\Software\HTC\SmartDialing"
I hope that is what u want and u'll have success with that. I think you'll not damage anything by doing that, if u do one change after an other and remeber the original settings. But I for shure can't give you a guaranty.
So good luck
No it's not that
In fact, when I open the phone, I have this display all the time.
Indeed, when I start to compose a number, the smartdial tries to match contact links, but what I'm talking about is present all the time, not only when I compose a number.
I'm going to have a look in the reg and see if I could find something
Thanks.
i'm sad
these look really pretty, but they won't work on my phone :'-(
i tried installing them, but they just made everything white...no background....just plain pure white...i have a treo 700wx, so if you can fix it plz let me know.
typhoone

(Jul 10) Touch-IT Diamond NORWEGIAN build 20226

Here is my latest.
Touch-IT Diamond v1 NOR CE OS 5.2.20226 build 20226.1.3.0 (Cube is removed/disabled)
You will experience that after flashing and booting up, the system will "hang" just let the device rest 20-30 sec before operating it.
after configuring, do a soft reset.
The system will stabilize, and be very fast and responsive
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screenshots are from WWE version
Thx to:
Tom Codon - Great friend, my master hehe, thx for all help Tom.
Meschle - Good friend, lots of support
Anichillus - Good friend, great wizard. thx for hypercore
Duttytroy - Tha man
Papamopps - My personal rom testing biatch for Herald great moderator, good friend
Bepe - Fantastic tools, amazing work, as always
Gollum - Scandinavian wizard
Alex - Wow, all the work you do, great tutorials
Sleuth - For User Customization, great work man.
Ayerthon - Thx for reg edits, great work
Swtos – creator of a great Polaris Kitchen
Ervius – Help on xip-porting
Its right – Also help with explaining xip port
Poorlyduck - For the white diamond wmp & Audiomanager skin I used as base for my skins
Everyone else who I might have forgotten
And the list can go on and on and on....to the many, many great ppl here…thx
What u get from me in this BETA version of my rom is basicly:
Touch-IT - HTC Home
Touch-IT - CommManager
Touch-IT – DualDialer
Touch-IT - Random Access
Touch-IT – EndKey
Touch-IT – MediaPlayerskin (download seperate and place on sd card, then choose as skin in mediaplayer)
Touch-IT – AudioManager
Touch-IT – Tweaks
HTC Album
HTC Audio Booster
HTC Diamond Streaming Media
NetCF 3.5
Included Apps:
Touch-IT - Diamond calc skin
Total Commander 2.5 final
SoftReset
Schaps AdvancedConfig v2.1.0.0
MagicSS
PIM Backup 2.8
SoftkeyAPPex
Updated Bluetooth
tcpmp 0.81
Removed
Cube
Some useless graphics
Ringtones
tsk
Callback to MS
Transcriber
MSN Live
alot more...
Additional note:
1: If you want to use my wmp skin, download from attachments, unzip, copy to sd-card and choose as skin in wmp
2: Cube is REMOVED, you cant enable it, you must find a cab, or add the files manually.
3: Scrolling in contacts has a weird bug,no scrolling. Im not sure what cause this, but I will post a fix when I figure it out.
Disclaimer:
I take no responsebility to any harm that could be done to your device
Rules:
If you dont know how to flash this romupdate, please search the forum for answers.
You need Hard-SPL for this to work. < ----See thread about hard-spl
Please dont spam this thread with flaming, namecalling. Be respectful to everyone.
Ask questions in a polite manner, and you will get reply from me.
Dont ask why I removed this or added that.
Do not sell this software on E-bay or other places
Do not use anything from this rom without asking first.
Touch-IT additional info and links:
Good threads to know about:
Diamond Keyboard: If the Diamond keyboard is not working for your language, you will most likly find a cab for it here
Themes: If you want to change your homescreen apperance
Cab files: Need a app thats not installed?
Cab files 2 : More/other? cabs
Tips & Trics:
TURN ON/OFF THREADED SMS/MMS
WANNA REMOVE THE TOP BAR (with menu etc etc)
Advanced Configuration: How to customize and edit
Advanced Configuration: Main thread
If you like my work, please donate using the “Donate here” above my sigpic
Download:
Touch-IT Diamond Norwegian
You will experience that after flashing and booting up, the system will "hang" just let the device rest 20-30 sec before operating it.
after configuring, do a soft reset.
I HAD THE SAME PROBLEM ON NIKE
after switching to task manager version 2.0.31249.1
the problem is gone
Nice work
BR
jerpelea said:
You will experience that after flashing and booting up, the system will "hang" just let the device rest 20-30 sec before operating it.
after configuring, do a soft reset.
I HAD THE SAME PROBLEM ON NIKE
after switching to task manager version 2.0.31249.1
the problem is gone
Nice work
BR
Click to expand...
Click to collapse
not entirly true, because I have used that version, and the problem is still there
I use a newer version now, but obviously same issue is present.
But for some reason my wwe version dont have this issue.
itje said:
not entirly true, because I have used that version, and the problem is still there
I use a newer version now, but obviously same issue is present.
But for some reason my wwe version dont have this issue.
Click to expand...
Click to collapse
also remove connection setup aurostart from registry
let it install but run manualy and the problem is gone
BR
jerpelea said:
also remove connection setup aurostart from registry
let it install but run manualy and the problem is gone
BR
Click to expand...
Click to collapse
ill try it, but in the wwe version it all works fine, no lag or hanging
when you hang up a call, it says "Redial".. you forgot to translate it!
Getting anywhere with the scrolling problem?
Everything else is working fine yet!
edit:
one more "problem".. when Im typing a sms message, the touch diamond keypad buttons don't show that the are being pressed. They only do that if I hold the button down for a long time! Your previous touch-it release didn't hva this problem! (If it even is a problem? Or is it supposed to be like this?)
It shows that it is being pressed when I press the ABC T9 button!
Thanks
9khil said:
when you hang up a call, it says "Redial".. you forgot to translate it!
Getting anywhere with the scrolling problem?
Everything else is working fine yet!
edit:
one more "problem".. when Im typing a sms message, the touch diamond keypad buttons don't show that the are being pressed. They only do that if I hold the button down for a long time! Your previous touch-it release didn't hva this problem! (If it even is a problem? Or is it supposed to be like this?)
It shows that it is being pressed when I press the ABC T9 button!
Thanks
Click to expand...
Click to collapse
i have not translated, im using language files from norwegian rom so if there is a language problem, then its there from htc's side
have you chosen norwegian as default language in keyboard option? cause it works fine for me.
and maybe try to select norwegian in instillinger/regionale instillinger?
good luck
I've done that, too. But it doesn't help. Maybe I should try some other languages, and see if they work!
9khil said:
I've done that, too. But it doesn't help. Maybe I should try some other languages, and see if they work!
Click to expand...
Click to collapse
see also bottom of my first post, there is a link to language cab files for diamond keyboard, perhaps installing the norwegian keyboard cab the issues might be solved.
cheers
Great ROM
This is the fastest 6.1 ROM I've tried yet. But you really need to fix that hang that always occurs after a soft reset. It happens when I click the top menu bar (either start menu, taskbar icon or something similar). Then total freeze for 20-30 seconds. But after that it's blazing fast and so far totally stable.
Missing jbed java runtime, but that I can always install myself. I'm missing the cube though. I was a keen "cuber" and wonder what is the quickest way to re-enable it?
Also, quick contacts on the today screen in the home plugin does not seem to work (probably because you have removed the cube).
Keep up the good work.
pananza said:
This is the fastest 6.1 ROM I've tried yet. But you really need to fix that hang that always occurs after a soft reset. It happens when I click the top menu bar (either start menu, taskbar icon or something similar). Then total freeze for 20-30 seconds. But after that it's blazing fast and so far totally stable.
Missing jbed java runtime, but that I can always install myself. I'm missing the cube though. I was a keen "cuber" and wonder what is the quickest way to re-enable it?
Also, quick contacts on the today screen in the home plugin does not seem to work (probably because you have removed the cube).
Keep up the good work.
Click to expand...
Click to collapse
1. working with it. But to me the advantage with this build outweights the minus (hanging issue) I solved it in wwe version, but same "fix" didnt work with this..but as I said, im working on it
2. one of the reasons its fast is because cube is removed, so depends on what you want but if u want cube, you need to install a cab...
3. that quick contacts in htc home is not workin, has nothing to do with the cube is gone, It has with registry settings beeing diffrent somehow, I will look into it.
cheers
After installing so I decided to reisntall another ROM because this one is freezing and can not make a connection with PC.
May the writer making the ROM more stable and functional so can be installed again.
With my regards,
the king said:
After installing so I decided to reisntall another ROM because this one is freezing and can not make a connection with PC.
May the writer making the ROM more stable and functional so can be installed again.
With my regards,
Click to expand...
Click to collapse
did you read anything from the 1st post?
besides, connection to pc? Im using this rom, its a released rom of my personal rom, and Im syncing it almost everyday.
the rom is very stable, the hanging issue with this buildversion is common, but acceptable due to its stability and speed.
cheers
Did you remove htc Large Title Bar ?

[APP][UPD: 2008.12.10.1]Gyrator 2: Auto Screen Rotation for *ALL* HTC Diamonds

[size=+2]Now supports ALL HTC Diamond/HTC Diamond Pro variants![/size]
Gyrator has an advanced graphical configuration interface which can be used to create
thousands of combinations of events to suit every users needs. Windows can be excluded
from all events, or only some of them. Customisable sound events can be triggered, and
the device can be made to vibrate for any event. The keypad can be locked, the screen
can be turned off, or the entire device can be instructed to suspend.
There's alot more information, too much to display here, along with advanced information
and guides on the project website which can be found at: http://gyrator.brins0.net
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are interested in what's new, check the Version History on the project site.
Hope you enjoy using this program and that it's useful to you in some way...
____________________________________________________________________________
Requirements:
- HTC Diamond / HTC Diamond Pro
- WM6+
- .NET Compact Framework v3.5
If you really like this program, and want to buy me a coffee, you can do so here
A big thanks to my beta tester "LucidObscurity" from the forums, who's helped me iron out some of the small bugs.
Also a big thanks to one of my kind users, "Kiekeboe100", for donating the webspace gyrator.brins0.net is hosted in.
Forum user "starbase64" has written a useful tutorial for German Gyrator users which can be found here: http://www.handy-faq.de/forum/windows_mobile_6_6_1_forum/54564-gyrator_screen_rotator.html
More information and download HERE
Doesn't rotate programs on the Touch Pro here, but it can somehow rotate the TouchFlo interface.
Same on HTC Diamond. Rotates main screen (messes up graphics for the icon tab) but still rotates it. Wont rotate anything else i tried so far.
Got an error 2 after few rotates
levka said:
Same on HTC Diamond. Rotates main screen (messes up graphics for the icon tab) but still rotates it. Wont rotate anything else i tried so far.
Got an error 2 after few rotates
Click to expand...
Click to collapse
- Make sure you have the .NET Compact Framework v3.5 installed. It will work with 2.0, but can have issues (I've run my tests with 3.5)
Also, there are known issues with the touchflo interface. Normally screen rotation is completely disabled on the diamond to remove any possibilities of program messing up, so it's bound to cause issues i'm afraid. When I ran tests on my device, I didn't come across any errors, although I have completely removed TF3D from my diamond.
Can you try and make the error happen again, and record the steps you took to make it happen, as well as all the information the error window gives you, and i'll try and correct the problem.
Edit 1: Forgot to add that the library cannot retrieve orientation information on some devices with certain roms installed, but that's out of my control i'm afraid. It will affect all programs that rely on the "Sensors" sdk library.
Edit 2: Can you also tell me which roms (OS/Radio) you are using as well, as this will likely be related to the problem in some way (See Edit 1)
App works .... but manila freezed.
And i don´t can find any options to configure
Röchelhilpert said:
App works .... but manila freezed.
And i don´t can find any options to configure
Click to expand...
Click to collapse
As I mentioned in a previous post, Manilla (Touch Flo 3D) is known to cause problems in non-portrait orientations...
The options are in the top of the right softkey menu, there's 3 of them:
Enable Rotation
Enable Sounds
Enable Images
Application is ver similar as gsen in regards to Telus Mobility Diamonds.
Rotation does not work except for within the programs list. Any where else (text messages, ie, etc) absolutely does not work
darn!
mightymike84 said:
Application is ver similar as gsen in regards to Telus Mobility Diamonds.
Rotation does not work except for within the programs list. Any where else (text messages, ie, etc) absolutely does not work
darn!
Click to expand...
Click to collapse
Yeah, i'm afraid that's a limitation of the library which has been made availabel to us. It Telus want to go and destroy the ROM/device, then unfortunately we have no control over it. It's like T-Mobile removing 64MB of the RAM when they changed the shell, it's only got 128MB now. I do wish I knew why companies like to bastardise perfectly good phones, then sell them on as if they were the same... It's quite insulting sometimes...
[2008/09/22] New version!
A new version has been released, so have added this post to bump the topic up.
This is a large update, and should be used instead of the older version as it confains various new options and features, as well as performance updates.
Link to information post concerning the updates, as well as download information.
Thanks for this mate,works like a charm.Tried the rotation out on most of my programs and it works flawlessly.My contacts rotate fine and the text message also,the text input even changes to full qwerty keyboard on rotation,amazing.
owz206 said:
Thanks for this mate,works like a charm.Tried the rotation out on most of my programs and it works flawlessly.My contacts rotate fine and the text message also,the text input even changes to full qwerty keyboard on rotation,amazing.
Click to expand...
Click to collapse
Your welcome, hope it's not too hard to configure, I have put alot of thaught into how to make it simple for the end user to configure...
brins0 said:
Your welcome, hope it's not too hard to configure, I have put alot of thaught into how to make it simple for the end user to configure...
Click to expand...
Click to collapse
No problems to configure at all,the only problem is when rotating touch flo 3d,but i know thats going to be a problem for any rotation app.thanks again
owz206 said:
No problems to configure at all,the only problem is when rotating touch flo 3d,but i know thats going to be a problem for any rotation app.thanks again
Click to expand...
Click to collapse
I've disabled TouchFlo 3D on my device, so unfortunately I can't get the window title/class for it, to add it to the blacklist. If you would be kind enough to find the class for it (i'm guessing the entire today screen) then it can be added to the configuration file for all to see.
I've added the "Applications.ini" file to my server for folk to download. this will be updated more frequently than the application, so keep an eye out for changes
I don't think it likes my Touch Pro. It works fine using File Explorer but that's it. After trying to test it out in the all settings and all programs menus it gives the error that Levka posted.
enrique999 said:
I don't think it likes my Touch Pro. It works fine using File Explorer but that's it. After trying to test it out in the all settings and all programs menus it gives the error that Levka posted.
Click to expand...
Click to collapse
As other users have stated, as well as myself in the first post, it suffers form the generic error what all programs using the GSensor library. It has been covered in the GSen program info page too...
CharlyV said:
Not working on HTC Touch Pro with ROM version 1.90.0.0 or newer and HTC Touch Diamond with Telus ROM.
Click to expand...
Click to collapse
As previously stated, i'm afraid this is out of my control, although hopefully in the near future, the library will be improved, and will be able to deal with these "different" devices. As soon as support has been improved, i'll be sure to include it in my latest build.
[2008/09/23] New version!
A new version has been released, so have added this post to bump the topic up.
This is only a small update which adds a few new features and improvements.
Link to information post concerning the updates, as well as download information.
hope this works for Sprint ROM?
i liek this app and wish i could use it. im on a telus device.
Hit me up if you want anything to help out on getting this to work on telus/sprint devices i have all the rom files and can make reg dumps.
how is the power consumption if i may ask?
awesome app tho, gonna try it today
I have some question...
1)Framework v3.5 is 35MB...need I install Framework v3.5(35MB) to my diamond...because my diamond free space only 40 MB....
2)install Framework v3.5 via ActiveSync?

[REQ] 3G PHONE CANVAS / DIALER - WVGA - WM 6.5.x

Please help me!
I am looking for a 3g phone canvas package for my Xperia X1 kitchen. It's a WM 6.5.5 ROM (Build 23569), the X1 is a WVGA phone and the phone canvas should support the landscape mode. German MUI files would be nice to have but I can do the translation myself.
I don't care much about the design. A standard HTC design would be nice.
right from my kitchen - PhoneCanvas_4_2_51720111829_0 (Rhodium S 2.07 as far as I remember) with all fixes included
That was quick! Thank you very much! I will test it and let you know if it worked.
There are a lot of folders in that archive. Do I need all of the folders?
Cyberdyne, that's for debugging purposes, you can merge some of them.
Examples: merge all packages in \Phone_Canvas_4_2_51720111829_0\, merge two VideoTelephony packages.
PhoneCanvas fix is a fix for WM6.5.3.
It works great! No WM6.5.x problems any more and landscape works perfect as well. Thank you very very much!
I just saw that you have an X1 as well. I have one more Problem:
The new SE camera app R27-35059 (R3A) which worked like a charm with the WM6.5 ROM does not work at all with the new WM6.5.5 ROM. Now I am using the old R23-33178 but this app does not have auto flashlight and geo-tagging features. Which camera app do you use?
And last but not least: Are you the one who found the fix for HTC volumen control for WM6.5.x? I tried the cab-file first which didn't work but cooking the pakage solved the problem and now it works again.
ultrashot said:
right from my kitchen - PhoneCanvas_4_2_51720111829_0 (Rhodium S 2.07 as far as I remember) with all fixes included
Click to expand...
Click to collapse
Hey ultrashot, do you remember the hex values you changed to fix the phone softkey icon for the rhodium dialer? I have found the values for leo dialers and others, but cannot find the same values to change in the CDMA rhodium dialer that I use. I've attached a screenshot showing the problem (hard to see since it's mostly transparent, but there's an outline around the phone icon that is not present in 6.5). Thanks and sorry for hijacking your thread Cyberdyne .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cyberdyne said:
I just saw that you have an X1 as well. I have one more Problem:
The new SE camera app R27-35059 (R3A) which worked like a charm with the WM6.5 ROM does not work at all with the new WM6.5.5 ROM. Now I am using the old R23-33178 but this app does not have auto flashlight and geo-tagging features. Which camera app do you use?
Click to expand...
Click to collapse
the one with auto flashlight and geotagging no magic, it just works.
Cyberdyne said:
And last but not least: Are you the one who found the fix for HTC volumen control for WM6.5.x? I tried the cab-file first which didn't work but cooking the pakage solved the problem and now it works again.
Click to expand...
Click to collapse
who developed*
mwalt2 said:
Hey ultrashot, do you remember the hex values you changed to fix the phone softkey icon for the rhodium dialer? I have found the values for leo dialers and others, but cannot find the same values to change in the CDMA rhodium dialer that I use. I've attached a screenshot showing the problem (hard to see since it's mostly transparent, but there's an outline around the phone icon that is not present in 6.5).
Click to expand...
Click to collapse
Hmm, I don't remember exactly, but I think I simply changed the png icon. Perhaps with some hex-editing. It was done so long ago...
ultrashot said:
the one with auto flashlight and geotagging no magic, it just works.
Click to expand...
Click to collapse
Not here! With the new camera app (which works perfectly with WM6.5) nothing happens when I press the camera button and when I press the camera icon in the Manila Picture-tab the camera starts but without any text (like a missing mui-file).
When I use the older camera pakage everything works just fine.
I just downloaded your kitchen and found a pakage named "fix_CameraLauncher". Could this be the trick?
ultrashot said:
who developed*
Click to expand...
Click to collapse
Upps - sorry!
Do you have a donation-button somewhere? You realy helped me a lot!
Not here! With the new camera app (which works perfectly with WM6.5) nothing happens when I press the camera button and when I press the camera icon in the Manila Picture-tab the camera starts but without any text (like a missing mui-file).
When I use the older camera pakage everything works just fine.
I just downloaded your kitchen and found a pakage named "fix_CameraLauncher". Could this be the trick?
Click to expand...
Click to collapse
No. Really, there is no any trick for XperiaCamera. It works out of the box. Have you tried it on device, or in a kitchen?
fix_CameraLauncher is a thing for co-existance of HTC camera and SE Camera, should work only on my rom.
Do you have a donation-button somewhere? You realy helped me a lot!
Click to expand...
Click to collapse
only WebMoney account
ultrashot said:
No. Really, there is no any trick for XperiaCamera. It works out of the box. Have you tried it on device, or in a kitchen?
Click to expand...
Click to collapse
I cooked it ina kitchen. Now I have tested 4 different R27 camera apps and only one (the one from your kitchen) worked with my Build 23569 kitchen. Yours was the only one which stays in the window-folder. The other pakages always installed to \program files\... ! But I am not sure if this is the reason why it works. One small problem still exists. The camera button in the Manila-Picture-Tab does not start the app?! Does it work in your ROM?
ultrashot said:
fix_CameraLauncher is a thing for co-existance of HTC camera and SE Camera, should work only on my rom.
Click to expand...
Click to collapse
OK, thank you for the info!
ultrashot said:
only WebMoney account
Click to expand...
Click to collapse
Do I have to sign up to send you a donation? I realy don't want to have an other internet payment website.
OK, this is getting more and more off-topic but I have an other small problem. When I was testing your bluetoothswitch app I noticed that I don't get a BT symbol in the upper info-bar. Telefon, WiFi, Battery, clock and all kinds of notification work (small icons can be seen) but BT. BT functionality is OK but there is no small icon. What could it be?
One small problem still exists. The camera button in the Manila-Picture-Tab does not start the app?! Does it work in your ROM?
Click to expand...
Click to collapse
in fact, it launches htc's Camera.exe.
Do I have to sign up to send you a donation? I realy don't want to have an other internet payment website.
Click to expand...
Click to collapse
Don't care then ROM making is just a hobby for me, no donations needed
OK, this is getting more and more off-topic but I have an other small problem. When I was testing your bluetoothswitch app I noticed that I don't get a BT symbol in the upper info-bar. Telefon, WiFi, Battery, clock and all kinds of notification work (small icons can be seen) but BT. BT functionality is OK but there is no small icon. What could it be?
Click to expand...
Click to collapse
Have you tried TaskBarIconMgr_2_13_0_0?
ultrashot said:
in fact, it launches htc's Camera.exe.
Click to expand...
Click to collapse
If you don't like it, I can tell you what I did to change that.
ultrashot said:
Don't care then ROM making is just a hobby for me, no donations needed
Click to expand...
Click to collapse
For me it is a hobby too and you help a lot. Maybe I can try to send you cash via snail-mail but we should talk about that via PM or E-Mail.
ultrashot said:
Have you tried TaskBarIconMgr_2_13_0_0?
Click to expand...
Click to collapse
Not yet. I didn't know if this is compatible with WM6.5.x. I though there has changed the files which are responsible for the icons from WM6.5 to WM6.5.x?! But I could be wrong and I will test the Taskbar Icon Manager.
I will also include your g-sensor dummy pakage!
Cyberdyne said:
Not yet. I didn't know if this is compatible with WM6.5.x. I though there has changed the files which are responsible for the icons from WM6.5 to WM6.5.x?! But I could be wrong and I will test the Taskbar Icon Manager.
Click to expand...
Click to collapse
It is compatible whith 6.5.X, and it manages the extra icons in the taskmanager: bluetooth, headset...
Cyberdyne said:
If you don't like it, I can tell you what I did to change that.
Click to expand...
Click to collapse
One of manila_photo lua scripts I guess Or you've replaced Camera.exe with SE's CameraRunner.exe.
mac_es said:
It is compatible whith 6.5.X, and it manages the extra icons in the taskmanager: bluetooth, headset...
Click to expand...
Click to collapse
Thank you! I am flashing right now and I hope I will have a "bug free" ROM in a few minutes!
ultrashot said:
One of manila_photo lua scripts I guess
Click to expand...
Click to collapse
Ha ha! You don't realy think that I could fix such a problem by messing around with lua scripts?!
I cook ROMs for 3 different phones and I don't have the time to "learn" what to do and how to do stuff with lua scripts.
And I could only use it with my X1 ROM because Wizrard and Kaiser only have Manila2D and afaik that has no lua scripts.
ultrashot said:
Or you've replaced Camera.exe with SE's CameraRunner.exe.
Click to expand...
Click to collapse
BINGO !!!
I like it simple!

Categories

Resources