Got a non-working Magician - JAM, MDA Compact, S100 General

Hi,
a friend showed me his broken Magician (T-Mobile MDA Compact).
It did not turn on, no led, no nothing...
I plugged in my fully charged battery from my Charmer and connected it to my power supply, same thing.
I tried to enter boot loader (power, camera, reset pin), no reaction.
Any hope for this thing? Is there a sort of even "harder" reset?

Your phone may have 'bent' or broken battery terminas that aren't making contact.

Hi,
sorry I know this doesn't answer your question at all, but I was just wondering if you managed to get your Magician fixed in the end.
My daughter's SPV M500 recently stopped working, pretty much the same symptom, so I was wondering if you were successful in fixing it, and if so, how?
Thanks in advance!

Try this- open the back of the device, undo all the screws, open until you see the circuitboard. on one side (i can't remember which one) check the widest cable that connects to the circuitboard - undo the latch and pull it out, push it back in and close the latch, then try turning it on. that cable keeps coming out in mine.

The widest ribbon, is actually the LCD ribbon.
He would have still heard the introductory 'beep' if the unit was actually working (even if the LCD wasn't connected).

i got the same problem.....
i am surfing on the net of my XDA when it shutdown i thought it was a battery problem so i try to charged it but i've noticed that it didn't opened for a couple of hours of charging. i tried to reset but it didn't work. so i decide to hard reset my phone but again it did'nt work, and now my XDA II mini WM 6.1 is totally dead.... i also tried to flash my phone but the activesync of my phone cant detect my PC, and even rebooting my phone also did'nt work.
i've also noticed the redlight blink on the led for a seconds when i charged and unplug the charger...

Related

O2 XDA Mini won't power on

Hi All,
Got a problem with a Mini. The unit will not power on. It doesn't appear to charge either. When I remove the battery, and re-insert, I hear a "click" noise but nothing after that.
The LED does not light when power is connected.
It does not hard reset.
Any ideas?
Thanks
Sonny
Update
Ok, here's an update to the above post.
When the battery is inserted and the back cover is off, the LED on the top glows red. When the back cover is put on, the LED turns off.
The unit will not work from external power with or without the battery installed.
Does this help?
SF
Must be someone out there that can help?
got the same problem...
see if you can try another battery, mine does not power on without the battery in anymore. The back cover must be on before you can power it on and the red light means that it is charging but there is not enough charge to turn on.
same prob. here...
i am surfing on the net of my XDA when it shutdown i thought it was a battery problem so i try to charged it but i've noticed that it didn't opened for a couple of hours of charging. i tried to reset but it didn't work. so i decide to hard reset my phone but again it did'nt work, and now my XDA II mini WM 6.1 is totally dead.... i also tried to flash my phone but the activesync of my phone cant detect my PC, and even rebooting my phone also did'nt work.
i've also notice that everytime i charge and unplug the charger of my phone the redlight blink on the "led?"(correct me if i'm wrong) for a seconds...
Same here. My phone is dead when I'm trying to flash it. Now it's totally dead. Is there a way to fix this?
Hello! I've got the same problem, but somehow I did it a hard reset and my O2 just power up. I try to wake up my O2 without battery with USB charger/ with battery with USB charger/ without battery and back panel with charger/ with battery and back panel and somehow I do a hard reset. Best Regards
MoHuToP said:
Hello! I've got the same problem, but somehow I did it a hard reset and my O2 just power up. I try to wake up my O2 without battery with USB charger/ with battery with USB charger/ without battery and back panel with charger/ with battery and back panel and somehow I do a hard reset. Best Regards
Click to expand...
Click to collapse
you try a hard reset by pressing the camera button and soft reset power simultaneously

Qtek 9100 (HTC Wizard) bricked :((

I have upgraded my Qtek 9100 with new Windows Mobile 6 WWE. After restarting the device everything worked OK, i just setted up basic things (clocks, owner information etc..) - nothing peremptory. After this I restarted it with soft reset again and it still worked... But then i shortly pressed power button (just to turn off the display) and after 10 minutes i wanted to turn it on again, but nothing happened.. The GSM LED diode still winked, but I couldnt turn the device on. So I used soft reset and again nothing happened, just GSM LED diode stopped winking. - Since this it was totaly bricked. I also tryed hard reset and bootloader mode, but none of this appered. The battery was 100% charged and I tryed to charge it again, but it didnt helped. I also tryed to take out and insert again the battery, but it still was unsuccessful What should I do now?
If the lights are still blinking then the phone still has life and appears to be operating (in some fashion). If you plug in the USB cable, does the charging light come on? If that does, then it is definetly still running.
I would suggest you taking the battery out and leaving it out for 5mins - 30mins. Then putting it back in and try turning it on. If nothing, try doing a hard reset after that. Also remove your SD card.
Good luck
Lights arent blinking at all. When I plug in the USB cable or charger, also no lights. I also tryed hard reset after plugging the battery, but again unsuccessful
Sorry, but its sure sounding like a bricked phone (although I've never heard of one that bricked sometime later. Usually its right after an upgrade).
Only other possibility is your battery has been completely drained. Can you get another battery to try in the phone? If not, then you can try jump starting the battery.
http://forum.xda-developers.com/show...38&postcount=9
Yes, I know that is bricked. What should I do to unbrick it?
Temporary brick at most if it was still running after the update. Try the different combos of battery out and in. This sounds like what a device does when the battery is bombed. If nothing, a new battery is definitely in order before you assign it permanent doorstop status. Good luck.

Amber charge light always on! Arrhh!

Hi everyone,
I have an unusual problem and I have searched almost the whole internet but I have not found an answer, so now I turn to you for any ideas. My problem is that over the past month, my amber/orange charge light remains constantly on, even when the phone is not charging. I have tried to soft reset, I have looked into HKLM->Drivers->BuiltIn->Battery key and have found no solution. The phone will still charge the battery OK. The other bluetooth light works OK, it still blinks when bluetooth is on. The right led remains orange. I have also tried to take out the battery and re-insert, but issue persists. I am using Faria's 3.3 and IPL/SPL is 2.26, radio is 2.61.11 for over 6 months on a WIZA100, but the issue has occurred a little over a month. Phone has always been well taken care of, no major drops and absolutely no water has ever touched it. Battery drain is normal, I get about 1 day and a half of normal usage, push email. I thought it was batterystatus, and I have removed it, but problem persists. When I soft reset, as soon as the IPL/SPL screen comes on, better yet, as soon as the HTC logo screen before the IPL/SPL screen comes on, the battery light remains constant orange. Any ideas? Please help!!
Sincerely,
Ricardo Cheing
Ricardo Cheing said:
Hi everyone,
I have an unusual problem and I have searched almost the whole internet but I have not found an answer, so now I turn to you for any ideas. My problem is that over the past month, my amber/orange charge light remains constantly on, even when the phone is not charging. I have tried to soft reset, I have looked into HKLM->Drivers->BuiltIn->Battery key and have found no solution. The phone will still charge the battery OK. The other bluetooth light works OK, it still blinks when bluetooth is on. The right led remains orange. I have also tried to take out the battery and re-insert, but issue persists. I am using Faria's 3.3 and IPL/SPL is 2.26, radio is 2.61.11 for over 6 months on a WIZA100, but the issue has occurred a little over a month. Phone has always been well taken care of, no major drops and absolutely no water has ever touched it. Battery drain is normal, I get about 1 day and a half of normal usage, push email. I thought it was batterystatus, and I have removed it, but problem persists. When I soft reset, as soon as the IPL/SPL screen comes on, better yet, as soon as the HTC logo screen before the IPL/SPL screen comes on, the battery light remains constant orange. Any ideas? Please help!!
Sincerely,
Ricardo Cheing
Click to expand...
Click to collapse
It doesn't sound like you've tried hard resetting your device yet. Hard resetting the device will not revert back to manufacturers rom but will bring you back to the part where you configure the phone, before customization.
I imagine this is the only way you are going to get the orange light to go away, at least when its not charging... You can hard reset by holding the comm manager and voice button and pressing the reset button with the stylus.
BACK UP EVERYTHING BEFORE HARD RESETTING!!!! If you do not, you will lose everything on the device IE: music, videos, pictures, documents etc...
Try to use another Radio ROM version. The charging related issues are related to the Radio ROM.
Thanks guys, I will change the radio rom on my phone before hard resetting. I didn't want to try to hard reset because of the way I already have my phone configured. I have heard there is a way to create a cab with all customizations, but I'll have to figure out how to do this. I will report more later, because I'm at work right now and I don't have the usb cable.
Ricardo Cheing said:
Thanks guys, I will change the radio rom on my phone before hard resetting. I didn't want to try to hard reset because of the way I already have my phone configured. I have heard there is a way to create a cab with all customizations, but I'll have to figure out how to do this. I will report more later, because I'm at work right now and I don't have the usb cable.
Click to expand...
Click to collapse
Hi, my phone last night (O2 XDA Mini S (Wizard)) started the exact same symptoms as you. At half 4 last night the screen came on and the phone claimed to be charging, while unplugged. I soft reset, but no change. by the morning the phone now claims to be fully charged. I've taken the battery out for a while, soft reset but nothing has worked so far, it now claims to be 100% charged constatnly, so i'm currently running the battery down to see what happens.
did you ever find a solution to this?
Hello, just wanted to update the thread, after 1-2 months of the battery charging light always on, no matter what, it fixed all by itself as I was preparing to hard reset my phone, no BS, I swear. I took the phone in my hand and was debating if I should hard reset or just flash another radio rom, and bam, I saw the light go back to normal, blinking green. That day it went back to always on, but then it would fix itself, but finally it's back to normal. So I went ahead and flashed the official T-MO 2.26/ 2.26.11 ROM which downgraded my Radio from 2.61 back to 2.26.11 and replaced my OS and then I flashed the official T-MO 3.08/ 2.69.11 ROM which upgraded my IPL/SPL and Radio. I then flashed Dr. Dot's BlackDiamond 2.0 WM6 and applied the 2.69.11 radio fix on XDA Mobile 6 Release 3. My phone has been wonderful since, thanks everyone.
hi leewebster try this and let me know if it works for you
thanks Ricardo Cheing ,
your input helped as this problem started when i had charged my phone with wife's dopod m700 charger
any way after playing around for some time i figured a workaround for it
i did the regitry hack for disabling the charging via the usb,
powered off the device by pressing the power button then took out the battery and put it back and then powered the device and the problem was sorted also the phone now will not charge when connected to the comp
now if i enable the charging via the usb then the problem returns
hope this is of help to somebody
ps: registry for disabling charging via usb
HKEY_LOCAL_MACHINE/DRIVERS/BUILTIN/usbfndrv
enablineUsbcharging change the value to "0" (for disabling)
and
"1" (for re enabling)
Thanks for this tip, I have added a reference to this thread in the Wizard Wiki
just to update
today i re enabled the charging via the usb by making the registry hack , powered down the phone took out the battery and then restarted the device and was pleasently surprised to see that the device no longer had the solid amber light
device is working absolutely fine
Sweet hack
Hi, The post about disabling USB charging does indeed cure the charge light on all the time. Now the battery status works correctly. Only drawback was I use a cradle to charge with a USB plugged into a wall adapter. It won't work because of the USB being disabled and I mistakenly assumed since it was plugged into the wall it would although USB is USB whether powered from wall or computer. The factory AC adapter charges it fine though and the annoying light on all the time is gone. SWEET!! I will also re-enable it just to see if it remains gone like you did after a few days, and hopefully it will. If it doesn't I can live with it the way it is now
Thanks for the post!
Amber Charge Light Always ON!
wizard1 said:
Hi, The post about disabling USB charging does indeed cure the charge light on all the time. Now the battery status works correctly. Only drawback was I use a cradle to charge with a USB plugged into a wall adapter. It won't work because of the USB being disabled and I mistakenly assumed since it was plugged into the wall it would although USB is USB whether powered from wall or computer. The factory AC adapter charges it fine though and the annoying light on all the time is gone. SWEET!! I will also re-enable it just to see if it remains gone like you did after a few days, and hopefully it will. If it doesn't I can live with it the way it is now
Thanks for the post!
Click to expand...
Click to collapse
Dear All,
Please help me if possible. I have been facing this same issue, however, when I go to battery icon and click on it, the next screen shows that the battery bar is running as it runs during charging, though the device is not connected neither with USB and/or wall charger, amber light is also stays on. I did hard reset, i did soft reset, I took the battery out and put it back in, all my efforts are in vain, no success sofar. I must tell everyone here that this is my third battery and the last two faced the same problem and then died and now they are useless, using those two batteries, i can't turn the device on, i cannot charge the device, they are garbage now, please help if possible!
Is There any solution to this....
hi I have been facing the same problem in my HTC touch Viva (India))...... but the problem is random .......... all of a sudden the light comes on and the phone claims to be charging without any source of charging ............... however in my case soft reset makes the light revert back to normal......but the problem re occurs after a few hours ....... I have tried every solution given on the internet (Hard Reset , registry hack etc) ....... but no avail.........Has anyone found a solution to this
My phone Specifications
WM 6.1
ROM 1.35.720.2 WWE
RADIO 03.37.90

Charmer wont turn on

this is my firends phone - tmobile cmpact 2 - its never been cooked, standard wm5 rom and no upgrades or downloads. it suddenyl today entered bootload screen - we took out the battery restarted, then it loads to the tmobile splash screen the cuts off, now it wont even turn on
tried charging it, and the charge light doesnt ocm eon, any ideas??
Thanks
anyone?..........................................
You have to enter bootloader mode (look up the wiki for how to) and then run the official rom upgrade for charmer.
my charmer is also dead
right in the middle of typing in an adress at iGO on my Charmer with WM5 it started rebooting and turned black after the T-Mobile bootscreen. And I could only turn it on by removing the battery, waiting for some minutes and then turning on again, just to see the same thing happening - black after T-Mobile screen.
Now I cannot turn it on at all, cannot reset (neither hard nor soft), cannot get into bootloader nor can I charge it (at least no LED is indicating anything).
Does anybody have an idea? vlodeck?
At the moment I am not at home, so I cann't try the original power supply (so far I used the one in the car).
Thanks in advance!
There are two possible outcomes Jared.
Either your power supply in the car is not enough to lift up Charmer.
Or your battery went totally dead, in which case you would have to buy a new battery.
Good luck.
Thanks for the fast support!
the strange thing is, that it all started with battery at about 80%...
I will check on sunday with the original power supply and a battery from another device. Then I will let you know the outcome.
I can lend you my battery, Jared!
...to see if it is really the battery.
Otherwise I can only recommend the HTC Kaiser ;-)
problem solved for now
thanks frikibaby for the offer...
but vlodeck was right. At home I pluged in the charger and it started charging and I can also turn it on again. So for some reason my car charger does not charge the charmer anymore although the indicator and the battery bar says so ...???
Thanks for the support!!

[Q] Dead Universal

I've got a bog standard O2 XDA Exec (Universal) which I haven't used for ages, so I got it out, connected it to the pc to charge it and nothing happened.
I thought it might be the battery so I bought a new one and the same thing happened, so I bought an external charger, charged the battery and tried again, and it still won't switch on.
I've tried a hard reset, and get the press 0 or press X screen but nothing appears to happen!
I can get it into bootloader mode where it says 'serial' at the top of the screen and 'v 1.00' at the bottom.
Is there anything else I need to do to get it to switch on?
Many thanks in advance,
Neil
You may look into the sticky guide, good luck
If you can get into bootloader mode, have you tried reflashing?

Categories

Resources