Hi !!
After have modified PocketGravity Here
I modifyed DoubleSkill ,an other software from XFlib, to use the Gensor of the Diamond !
It's a basic but realy hard game!(See description on Xflib).
ps : the calibration of the Gsensor is done at each new "round", so keep the diamond in good position before cliking for the next "round"
Love the work they do, Hi to Mollusk, thanks for the GSen update trying it now. Thanks hellgod.
Just tried it and for me I guess No skill is a better title, I'm crap at it!
uniqueboy said:
Just tried it and for me I guess No skill is a better title, I'm crap at it!
Click to expand...
Click to collapse
I know that was realy hard!
My best score is only 21 !!
About the XFlib projects, if you got others ideas about a new port for Gsensor said it to me! (XFlib or other opensource project)
Doesn't work here.... it must be calibrated on my device, because the ball fall on the left side, also if i have the device rotated on the right. Some hint? I've tried GSensor calibrator but it doesn't save my calibration and it say that my GSEN is already calibrated (the bubbles are at the center of the bars)
hellgod said:
About the XFlib projects, if you got others ideas about a new port for Gsensor said it to me! (XFlib or other opensource project)
Click to expand...
Click to collapse
Not to sure about GSensor support but VGA versions would be nice.
SkizZO said:
Doesn't work here.... it must be calibrated on my device, because the ball fall on the left side, also if i have the device rotated on the right. Some hint? I've tried GSensor calibrator but it doesn't save my calibration and it say that my GSEN is already calibrated (the bubbles are at the center of the bars)
Click to expand...
Click to collapse
same for me...
....try to adapt skyforce (with a 3rd part program) with the g-sensor!!!
Ha.. AWESOME GAME!
AWESOME GAME! WORKED PERFECTLY ON MY HTC PRO
After have modified PocketGravity Here
I modifyed DoubleSkill ,an other software from XFlib, to use the Gensor of the Diamond !
It's a basic but realy hard game!(See description on Xflib).
ps : the calibration of the Gsensor is done at each new "round", so keep the diamond in good position before cliking for the next "round"[/QUOTE]
Guess it's ROM/Build dependent because it tilts to the left on my Fuze as well.
Thank you!
I will try it.
Nice! Im going to try this out
Related
Hi in this thread I am really hoping that programers will
make this interface also for VGA devices..All this time I always
envy QVGA devices, because most programers only think about them..
We as VGA user can not enjoy the great interface program like that..
So please programer or skin makers..release for VGA devices also =)
So far I only found out pointui has make VGA version also
Come on all VGA users let us support programers to create
skin programs for VGA also in this thread =D
No response
VGA user feels okay?? without this cool interface program??
touchflo and itask allready support vga! the cube doesn't so I use mortbuttons, not so stylish but skin support and works good! also I think the new 3d cube is much slower than the old one.. I want the 0.4 cube with vga
TacoLoco said:
touchflo and itask allready support vga! the cube doesn't so I use mortbuttons, not so stylish but skin support and works good! also I think the new 3d cube is much slower than the old one.. I want the 0.4 cube with vga
Click to expand...
Click to collapse
Thanks for letting me know about mortbuttons
Yes I have tested ftouchflo and it works but there is only little bug..which when my I made my phone to sleep mode and wake it up again my phone will become smartphone =p can not use touch screen anymore..gotta soft reset..ugh
theme freak said:
Thanks for letting me know about mortbuttons
Yes I have tested ftouchflo and it works but there is only little bug..which when my I made my phone to sleep mode and wake it up again my phone will become smartphone =p can not use touch screen anymore..gotta soft reset..ugh
Click to expand...
Click to collapse
damn I thought the problem with the screen was a hardware issue (dell x51v) thanks very much maybe ftouchsl fixes this..
You can find the cube and tones of VGA cabs here:
http://forum.xda-developers.com/showthread.php?t=342039
teixeirabmb said:
You can find the cube and tones of VGA cabs here:
http://forum.xda-developers.com/showthread.php?t=342039
Click to expand...
Click to collapse
Thanks bro, its really a cool colection but the cube I want is the C++ edition
Anyone tried this app on the athena? (as it also has an accelerometer) If so does it work?
http://s-k-tools.com/index.html?m_util.html#gsen
Would be brilliant if it works but my hopes aren't high as I couldn't find anything on the topic.
billu said:
Anyone tried this app on the athena? (as it also has an accelerometer) If so does it work?
http://s-k-tools.com/index.html?m_util.html#gsen
Would be brilliant if it works but my hopes aren't high as I couldn't find anything on the topic.
Click to expand...
Click to collapse
looks like a nice tool, but after I installed on my Ameo I tried to use GSen Version 1.40.
But a window popup with following message :
cannot connect to GSensor (1)
mhh, doesn't run on Ameo ... and delete it ...
Ameo, t-mobile ROM version 6
btw: I've now asked the developer why GSen is not running on Ameo ... hope I get an answer..
Accelerometer
Hey,
I've installed it on my HTC Advantage X7510 with WM6.! Professional, and I can confirm that it works.
When I'm in the today screen and I turn the PDA it does turn in Landscape and Portrait mode with no problem great at last it works.
Thanks for the link if anybody what's me to try anything please let me known.
Thanks
Gigino
I am happy for you gigino, but I am in the same boat as palmchen (have a X7500 with t-mobile WM6 ROM).
Perhaps the interface to the sensor is slightly different between WM6 and 6.1
I am sure it can't be that difficult to access it from WM6. Hopefully the developer will be able to implement it or give some clue which will assist some brainbox from this community in hacking this version to get working with WM6. In my eyes this is one of those killer apps.
I tried this on wm6.1, and had the same error message.
IMO the answer is simple: it works using HTC VUEFLO .dll. X7510 has those dll, x7500 doesn't!
In AP4 or AP5 it will work
sergiopi said:
IMO the answer is simple: it works using HTC VUEFLO .dll. X7510 has those dll, x7500 doesn't!
In AP4 or AP5 it will work
Click to expand...
Click to collapse
mhh, simple question?
could you please provide the new vueflo.dll for the old devices ?
If it only a dll to change that should be not a problem, or ?
btw: I've asked the developer, but he told me that he is to busy and have no time in the moment to update this programm.
Thanks for this. It is a great find. Works well with my X7510.
This is a must have application for the X7510. It is just amazing.
cktlcmd said:
Thanks for this. It is a great find. Works well with my X7510.
This is a must have application for the X7510. It is just amazing.
Click to expand...
Click to collapse
For some it is a must have. For others, it is an annoyance and irritation.
only because we can't get it working!
Sorry guys, we doesn´t have these devices for testing.
We just was surprised about the info, our tool is working on HTC Advantage X7510.
Also we not know the reason why it is not working on HTC Advantage X7500.
Possible reasons:
- missing/different software driver
- different ROM/ACU version
- missing needed hardware
As i said, we cannot test because of missing hardware.
billu said:
only because we can't get it working!
Click to expand...
Click to collapse
Not because of that. It was working all right.
I hated this auto rotate thing because 9 out of times the rotate happens against my wish, and it slows my device.
After the initial few minutes of novelty, I was already wanting to switch it off.
eaglesteve said:
Not because of that. It was working all right.
I hated this auto rotate thing because 9 out of times the rotate happens against my wish, and it slows my device.
After the initial few minutes of novelty, I was already wanting to switch it off.
Click to expand...
Click to collapse
for this exit a include/exclude list. check the diamond forum.
http://forum.xda-developers.com/showthread.php?p=2351034#post2351034
AnnaW said:
for this exit a include/exclude list. check the diamond forum.
http://forum.xda-developers.com/showthread.php?p=2351034#post2351034
Click to expand...
Click to collapse
Thanks for the info, but I still far prefer assigning rotate screen to a hardware button and just press that when I want to rotate.
Palmchen said:
mhh, simple question?
could you please provide the new vueflo.dll for the old devices ?
If it only a dll to change that should be not a problem, or ?
btw: I've asked the developer, but he told me that he is to busy and have no time in the moment to update this programm.
Click to expand...
Click to collapse
No, I don't, there are SOME dll, you can find it in the AP4 / AP5 ROM. I agree, the rotation is too slow and the screen rotation is useless and time consuming 90% of time. My brain is much faster in image rotation and my finger is slower than brain but acts only when needed
sergiopi said:
No, I don't, there are SOME dll, you can find it in the AP4 / AP5 ROM. I agree, the rotation is too slow and the screen rotation is useless and time consuming 90% of time. My brain is much faster in image rotation and my finger is slower than brain but acts only when needed
Click to expand...
Click to collapse
mhh, that makes me sadly ...
I would wish it will go faster and will run on my device (german tmobile WM6) ..
sergiopi said:
the rotation is too slow
Click to expand...
Click to collapse
Screen rotation is fast on mine. Might be ROM or today screen related in yours.
The speed you can change in settings: #timeout(value) - default value 1000 ms
Check http://forum.xda-developers.com/showthread.php?p=2351034#post2351034
X7500 (Ameo) with AP4 or AP5
I have tried it, but still I get the message that the gsensor cannot be found.
Edit:
Oeps it just start working. I noticed the veuflo was disabled.
can anyone post those .dll files, so others can use them? thanks
Here is HTC G-Sensor Calibrator extracted from HTC Raphael, works as well on Diamond.
[EDIT] G-Sensor can't be calibred on Diamond since original driver doesn't consider calibration data... We need to port Raphael driver.
Diamond users, I am preparing a big surprise for you...
Enjoy!
Wow, that's awesome !
Thank You
Doesn't seem to work for me. Installed it and ran the calibration.
However, it seemed that it didn't save the calibration for me?
Using bElite 0.95.
It doen't work for me, orginal duch rom.
Its say calibration completed but the bubbels are still not in the middle.
Unfortunately for me too. On Italian Original ROM 1.37 it returns 'Calibration Completed' but after that the left-right bubble turn back un-aligned.
...
What kind a big surprise Schaps, i'm getting so curious!!!
I had the impression it was working the first time I tried... Am I wrong?
Ok I will investigate to get it fully working, I think it should be possible.
I get the same thing. The Horizontal bubble is spot on but the vertical is a tiny bit out.
When you correct it, it says its calibrated then the Vertical bubble goes back to where it was?
Strange.
Nice find tho.
Im using a standard Stock HTC Rom 1.37.405.1 WWE. Not a cooked Rom.
GalliKO said:
What kind a big surprise Schaps, i'm getting so curious!!!
Click to expand...
Click to collapse
You will know more this week-end...
schaps said:
You will know more this week-end...
Click to expand...
Click to collapse
Great, i love suprises! Thanks schaps for all your hardwork and discoveries. I speak for all the Diamond users on here im sure!
guys..how can we really make sure the phone is flat? i tried with my diamond cover off, but if u touch the edge of the phone, you still can feel actually its not firmly flatten right?
BTW..i tried out the calibration tool as well...after re-enter the calibration tool with 1st calibration done, the reading is out again
For me, it does calibrate my G-Sensor, but if i soft reset the device, it come back to the same setting
Schaps, it works flawless in my ATHENA using the X7510/Diamond ROM
Very impressive
Dear,
I try it on my HTC original 1.37.406.1 French the soft is beautiful but can't calibrabe. Hope it did in a few time because it seems to be usefull.
Thank you.
Sorry but no calibation on my german o2 XDA Diamond with the orginal Rom! But i´m sure you guys will solve the problem!
sergiopi said:
Schaps, it works flawless in my ATHENA using the X7510/Diamond ROM
Click to expand...
Click to collapse
The Athena has a LIS302DL G-sensor whereas the Diamond (and Raphael?) has a Kionix KXSD9.
This utility runs on my Diamond, but does not calibrate the sensor. Maybe this utility is only intended for a specific chip?
Will try it! Thanks
Hi schaps, since you are looking at the g sensor and the Raphael, is there any chance do you think of it being possible to get VueFlo working on the Diamond, or would it even be worth having? Looking forward to your surprise, I hope it's a rom! Thanks for your hard work.
Ok,
the software works for sure because it changes some registry keys under :
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\GSensor
It changes the "calibrateX-Y" keys that were all set at 0 before. I've spot it writes a very strange value for key Calibrate3-2, and I guess that's why the Gsensor driver does set them back to default values. I am trying to understand how it works right now.
EDIT: Noway!! The data in regsitry are always set to default on reset, the strange value could be a negative number in an unsigned rappresentation. The good news is that the calibration work 'til reset.
P.S.: Some of the masters could please be so gentle to advice me on what disassembler to use for ppc software ? I searched this forum but I got confused. Thanks a lot.
Calibration works but Diamond driver doesn't consider calibration data, so there is no way to calibrate Diamond G-sensor using original driver. We need Raphael driver since it will use calibration data stored in registry. I have tried to port this driver to Diamond since it has exactly the same accelerometer hardware, but it doesn't work... It may be because Diamond doesn't have keyboard (G-Sensor should be automatically stopped on Touch Pro when keyboard is out or when device is in low power mode).
uniqueboy said:
Hi schaps, since you are looking at the g sensor and the Raphael, is there any chance do you think of it being possible to get VueFlo working on the Diamond, or would it even be worth having? Looking forward to your surprise, I hope it's a rom! Thanks for your hard work.
Click to expand...
Click to collapse
VueFLO is part of my surprise
It works on few apps at the moment but I plan to support most of apps in the future (including IE and Opera of course).
Post any new apps to the thread. I promise to update this post regularly.
Games
Caver..........................................................< update 08-10-04>
Lightsaber............. Video Removed
Lunar Tilt ............. Video
Sensor Maze
G-Invaders ............. Video.....................<update 09-01-03>
Diamond Beer v2 ............. Video........................<Updated 08-10-16>
Magic 8 Ball
Sensory Overload ............. Video
Diamond VR Hologram............. Video
Diamond Cubes Dice Simulator ............. Video...........................<Updated 08-11-02>
PocketGravity - G-sensor enabled physics simulator ............. Video
DoubleSkill - Gsensor enabled game
Resco Bubbles Teeter-like commercial Game ........ Video
G-Flow G-sensor stylish game ....... Video
YAGBT (G-Sensor ball game) ............. Video
TouchDown (platform-like helicopter game)
GPong2D (G-Sensor Pong Game) ............. Video......................<added 08-10-19>
BeMario Act the role of Mario in real life, with sound effects....... Video (demonstrated on a G1).................<Added 08-11-23>
Spin the bottle (Spin the bottle simulator) . ...................... Video....................... <added 08-11-24>
Navtris G-sensor and Navi-wheel Tetris game ....... Video.........................<updated 08-12-13>
SnowStorm 2 Simulated snow globe ....... Video.........................<added 08-12-08>
Marble World 2 Commercial Marble Madness game ...........<added 08-12-27>
Gravity Balls Space Invaders type Game ...........<added 09-02-20>
Aquarium Floating G-sensor-responsive fish ...........<added 09-03-04>
Shake and Win Magic 8 ball game...........<added 09-04-25>
Ball Physics Ball and gravity simulation game...........<added 09-04-25>
Gravity Pong Pong game using G-sensor...........<added 09-04-25>
Boing Bouncing Ball platformer...........<added 09-04-25>
Magic 8 ball Another Magic 8 ball game...........<added 09-08-29>
Utilities
Kai's Bubble Level.Net
GSen
BubbleLevel
Water Level / Spirit Level
Waterlevel 0.2............. Video
Diamond Profile Switcher
Diamond Shaker
Klaxon G Sensor Enabled Alarm Clock......................<Updated 08-10-21>
G-Controller Viewflo for HTC Diamond
Gyrator 2....Now works with ALL Diamond/Touch Pro Varients ................ <updated 08-10-13>
G-Remote G-Mouse ............. Video......................<updated 08-11-11>
Official G-Sensor callibrator for HTC Diamond
SensorLock ............. Video...............<Updated 08-10-01>
Seismo G-Force seismometer app ............. Video
Styluslock v1.6 Lock Diamond using stylus sensor ............. Video.................<updated 08-11-10>
GStopwatch Start and stop the stop watch by flipping your phone
Crazy Musik - change current track using g-sensor ............. Video
G-Alarm G-sensor-enabled alarm app..............................<update 08-10-31>
PocketShield - Advanced device lock software using g-sensor and light sensor ............. Video
Flipit (GNes- derived screen rotation app) .....................<added 08-11-20>
Answerkey Disabler Stop onscreen phone keys from answering call, disabled using stylus sensor .....................<added 08-10-20>
G-Light Replace automatic backlight adjustment with your own settings.....................<Updated 08-11-04>
TouchLockPro v1.9 (capacitive sensor-based phone lock application) . ......................<Updated 08-12-21>
LevelSight (auto-backlight app) . ......................<added 08-11-16>
Lumos (Complete HTC Auto-Backlight replacement) . ......................<added 08-11-30>
GScroll - scroll using the capacitive navi-pad ............. Video.......................<added 08-12-08>
G-Locker - Gesture-based phone locker ............. <added 08-12-14>
virtual d-pad - G-sensor based cursor control for the HTC Touch HD............. <added 09-01-22>
SensorScroll v0.5 - Scroll using the Navi-wheel on the HTC Touch Diamond/Pro............. <added 09-01-26>
Touch In Call Tweak - Stops screen blanking during phone calls............. <added 09-03-04>
G-Config - Easy configuration of new G-Sensor screen rotation service............. <added 09-03-04>
Shake and Win - Generate lottery numbers by shaking your phone............. <added 09-04-25>
Ran out of space on this page. More apps here
surur said:
Post any new apps to the thread. I promise to update this post regularly.
Click to expand...
Click to collapse
Nice done
Thanks for recopilating this...
Have you thinked in categorize in games, app, oters sections?
Cheers
jcespi2005 said:
Nice done
Thanks for recopilating this...
Have you thinked in categorize in games, app, oters sections?
Cheers
Click to expand...
Click to collapse
Good idea.
finally an updated G-Sensor thread.. been waiting for awhile for the updates.. nice job..
thank you for being an updater!
Great idea. Bump!
Good JOB . Make it a sticky mods !
Soon
there will soon be updated versions of g-flow and magic 8 ball ive just been working on cleaning up and optimizing the code in g-flow (was having performace issues when having many 50+ enemys on the screen lol
also
g-flow will have all new and shiny graphics on the next version and some levels too
one other thing
g-flow the tilt based game kidna like a mix between flow on the ps3 and geomitry wars on 360 is now going to be fully 3d rendered by the graphics card of the diamond and/or any other phone with enough power
if you can please donate its for a good cause (lol coffee and dock for my diamond to speed up development and because my cable is breaking and that would be bad)
danthekilla said:
if you can please donate its for a good cause (lol coffee and dock for my diamond to speed up development and because my cable is breaking and that would be bad)
Click to expand...
Click to collapse
Hopefully $5 is still enough to keep you awake and coding!
Surur
do anybody know the reg code of resco bubbles?
i can now only play til level 5
you will get it, when you paid for the game.
Update Date on Thread Title?
Hey OP, do you think you can put the update date on the thread title whenever you make some changes?
Thanks
itsallsubliminal said:
Hey OP, do you think you can put the update date on the thread title whenever you make some changes?
Thanks
Click to expand...
Click to collapse
Good idea. Will do.
thanks
surur said:
Hopefully $5 is still enough to keep you awake and coding!
Surur
Click to expand...
Click to collapse
thanks for the donation anything in particuler you want me to work on? g-flow is my main thing at the moment but your the one donating so if you have any game suggestions just send me a message or e-mail
danthekilla said:
thanks for the donation anything in particuler you want me to work on? g-flow is my main thing at the moment but your the one donating so if you have any game suggestions just send me a message or e-mail
Click to expand...
Click to collapse
Magic 8 ball definitely. I'm terrible at all the games
Surur
gMeter added
surur thanks for the update bro...
one more suggestion... can you put the version numbers of the apps too, just it makes it easier?
Thanks bro
Duh the one that makes the video's for wmpoweruser has the worst taste of music ever!
I think that everyone here knows the game on the iphone, computer and qvga winmo where you have to fly a helicopter trough a cave by tapping on the screen. Unfortunately there is no such game for VGA windows mobile phones, like the diamond. I hope that a developer is willing to make this simple game for the diamond, It'll make me (and others) very happy .
The qvga version (which simply doesn't start up on the diamond) is found here: http://gamezone.floftgames.com/game/helicopter .
The game is kinda like caver for the touch diamond, over here: http://forum.xda-developers.com/showthread.php?t=410178 , maybe that'll help.
theres a game called caver ! i think the helicopter is replaced by a ball! hope thats close enough for you ! search for it
idrisito said:
theres a game called caver ! i think the helicopter is replaced by a ball! hope thats close enough for you ! search for it
Click to expand...
Click to collapse
Thanks for the reply but caver is controlled by the G-Sensor and helicopter is controlled by taps on the screen or on a button. You can watch the clip below to see what i mean: http://www.youtube.com/watch?v=p1XA4j8Ecak#t=35s . As you can see, if you tap the screen the helicopter goes up and when you release the helicopter goes down. You can play it on your computer over here : http://www.addictinggames.com/helicopter.html .
VGA version
Hi, I just created VGA version but I don't have any device to test it, so you can try it on my homepage.
no man it keeps crashing ! on mine XDA ignito stock rom! cant get much info from the error report either! may be it works on the other roms
here you need?
try that one...
http://www.pda4x.com/read.php?tid=72178&keyword=Helicopter
How can we try it if we cant register for that site