Database Users

Qtek 9100 dead! need original Qtek rom! HELP!!!!!!

Hi guys, at the mo i have my phone in boot loader with the 4 colours and usb on the bottom left..
i am looking for the rom file.....currently i have tried using : -
Qtek_9100_RUU_Prodigy_10107105_Qtek_WWE_ship.exe from ftp://xda-developers.com/Uploads/HTC_Wizard/Roms/Qtek/ but when i load it says
'The application has failed to start because RAPI.dll was not found. Re-installing the application may fix this problem'
have also tried the T-mobile one and it says the same thing as above
so what do i do now?????????? someone please give me a direct link to the correct file as i cnt find it ne where
thanks

?? anyone please...

According to the Northern Hill Software web site, these kind of RAPI.dll errors can occur because you don't have ActiveSync installed on your PC (or your installation is corrupt).
Man, serious déja vu... I'm POSITIVE I've had this same discussion with someone else in the past on these forums before. :S

Hi,
I also experienced this problem. But after disconnecting the usb connection and after soft resetting the mda the old installed version worked again.
For me the problem was that i didn't unlocked the CID. I first had to unlock the CID (with the MDA vario) to be able to update an other rom.

[Q] hw 6910 help to exit TEST MODE

Hello, I have put my pda hw6910 in test mode, on the screen:
SERIAL
HP
VG.39
And now not as(like) extracting it, I have tried an erased(smeared) general but nothing, it(he,she) returns again(afresh): (some help?

On the hw6915 I leaved serial mode through "hard reset" (Red_Phone+Green_Phone+On/Off+Reset)
-varix-

Already I have tried(meant) it and it does not work

please help, dont work hard reset, CLEANING OK, and enter serial

help please,

Fix
Hi put the ppc in the base and execute the program uni_exitbootloader

dont work any solution?

just reflash
reflash your device (it can be done in test mode too...)
umph.. if you do not have nbf files then it could be difficult...

is vodafone uk ipaq 6910, in hp dont have flash for vodafone ipaq, and the vodafone page, Neither.
in hp i have the hw6910 but for free ipaq, not for vodafone, and say error in ID
heeeelp

Why not just call HP support? Just hang up some lame story that it 'just' happened.
Unless the phone is stolen, this shouldn't be a problem, and if it is, you don't deserve to be helpen .

Thanks
Wow, I really love this forum. I always find the solution here.
Getting out of the bootload screen worked:
(vchumacero)
Fix
Hi put the ppc in the base and execute the program uni_exitbootloader

vchumacero is the best
vchumacero
thanks man , you made my phone work again , thanks thanks thanks
you are realy expert bro

HP 6910 problem
screem hp
logo hp
vG. 39
i make reset hard and reset soft, not start
download uni_exitbootloader
problem not conneted usb
please help me!!!!

Is any can made hw6910 to WM6.1 or 6.5```
I have exhausted all local failed to find!
Any one help`

thanks!
deadlock1981 said:
Why not just call HP support? Just hang up some lame story that it 'just' happened.
Unless the phone is stolen, this shouldn't be a problem, and if it is, you don't deserve to be helpen .
Click to expand...
Click to collapse
wow this was very helpful for me. i did just what you told me and BAM! it worked! thanks
- its one thing to be stupid, its another thing to spread it

[Q] hw6915 italian rom... a link or something? 6915 is in bootloader mode...

i tryed to change os language from italian to english and i put my hp6915 in bootloader mode by copying and executing EnterBl.exe from my device... hard reset says "clearing ok", but the device rests in bootloader mode... i need italian rom in order to reflash the damned thing... of course, a method to bypass language check from english hpruu would be better, but i'd be happy to restore sw... please i need a solution asap... thank you...

i have similar problem MY iPAQ hw6915 is now in bootloader mode i need some firmware to update i cant find anywere, somebody can help?

Hi,
There is a tool which should help! It worked for me. It's called UNI_ExitBootloader
(ftp://xda:[email protected]/Universal/Tools_and_Programs/uni_exitbootloader.zip)
1. download the tool
2. disconnect USB cable from your device
3. disable USB connection in ActiveSync
4. reconnect USB cable
5. wait some 30 seconds
6. run the tool
7. If successful, device will boot itself.
Pawel

this solution is only for UNIVERSAL, not for SABLE, DONT WORK

@pjurczy
thanx a lot your solutin work whit my hp hw6915
thanx thnax thanx

juliog said:
this solution is only for UNIVERSAL, not for SABLE, DONT WORK
Click to expand...
Click to collapse
today i try and 100% work

I'm glad it worked
Pawel

you are the best!!!
pjurczy said:
Hi,
There is a tool which should help! It worked for me. It's called UNI_ExitBootloader
(ftp://xda:[email protected]/Universal/Tools_and_Programs/uni_exitbootloader.zip)
1. download the tool
2. disconnect USB cable from your device
3. disable USB connection in ActiveSync
4. reconnect USB cable
5. wait some 30 seconds
6. run the tool
7. If successful, device will boot itself.
Pawel
Click to expand...
Click to collapse
Yuo are the best!!!

worked for me Thanks!!

Super duper!
Been having sleepless nights. Thanks a lot for your solution. Worked like a charm!

Dam not work with win7 64bit, you have another solution?

Doesn't work in vista or 7
How to disable ActiveSync?
When I connect my HP to PC it recognizes as "HP USB Sync".
I tried to disable that thing in Device Manager, but still getting error from "uni_exitbootloader" program (cannot open usb port... and so on)
What can I do? Please, urgently need advice!
P.S. I firstly tried to update it's rom to english, with sable ruu, got error something like "fail to initialize"; and then my hw6915 stuck in the bootloader screen. tried hard reset, but after "clear ok" it just got back to that HP screen.......
EDIT --> I have just found out that these all methods doesn't work with Windows Vista or Windows 7, so I'm going to get to my brother's computer with XP soon to try another time

So every time you do the flash rom will have to borrow your brother's computer ??
why do not you use WMDC 6.1 for Windows Vista that also supports and works in Windows 7 ??
try to check at http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=14

Hakim Rahman said:
So every time you do the flash rom will have to borrow your brother's computer ??
why do not you use WMDC 6.1 for Windows Vista that also supports and works in Windows 7 ??
Click to expand...
Click to collapse
This one for WM 6.1, what could i do with it? hw6915 is WM 5.1.
Another cool thing, that i have just flashed it with uk rom successfully, with xp.
btw, the computer with xp is half-mine not only brother's.

Black Out? Qtek S100

Hi,
Il from Belgium. SORRY FOR MY BAD ENGLISH
I have a Qtek S100
R 1.01.00
G 133.38
D 1.03.02 FRE ( French i think )
I tryd to change my Extended Rom from French to Dutch or English... with some file i dont know... im new it this stuff and i F**kt it up!!!
My Qtek just goene black and on the screen u can see USB 1.0.0
After open the baterycover and plug in back the qtek starts BUT after starting install the original app. it goes back to thr BLACK screen and nothing happens.
If I plug in the USB and connect it with my pc, it comes on the screen USB 1.0.0 ....
SO PLA HELP ME PLS!!!
I tryd hard / soft reset, NOTHING!
I look at XDA alredy 4 days everyday 4-6 hours I tryd SO MUCH, I take a day off work, so to can fix it!
IM GOIN CRAZY PEOPLE!!! PLS PLS HELP ME!

Best thing to do is go to bootloader mode and installing a new flash.
Bootloader mode can be found on the forum, but to help you out:
press simultaniously: camera button + power + soft reset (last one with the stylus)
Then start the rom update on your pc (do not use this from vista it wont work (or you have to find the fix online..)
Easiest way is to flash from windows xp works like a charm.

I have the same problem than rocky_gent but I can get the bootloader mode
i'm stack in bootloader mode ! And when i connect the usb cable doesn't display the "USB" but insists with "Serial V1.00".
I want to upgrade my rom from a secure digital (sd) cause i don't have another choice!
I 've been surfing through forums but i only found how to make an sd to upgrade your phone when you have an mda or xda (.nb1 files) . Qtek's roms have .nbf files !!! So i'm looking instructions to make an upgrade sd card with .nbf files (Qtek , Htc Magician) and not .nb1 (Xda)!!
http://forum.xda-developers.com/attachment.php?attachmentid=24569&d=1127232848

?
where can i get new flash? and yes im with vista, why it wount work???

Prophet stuck at bootscreen and ActiveSync can't find it.

I Need help my S200 is stuck at bootscreen and ActiveSync can't find it.
all help u can't offer is welcome.

! more thing when i plug it in windows makes a sound like it found it and a sec after the sound like it is disconnected.
Hard Reset diden't help. does someone have a sd boot for s200 that i can' unbrick it?
I found a fix here http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery

Problem: When i start boot modus, pc recognizes phone, but when i start the exe to flash, xda isn't recognized ?
Thx in advance

Finally I GOT IT .... YIHA XD
****ing PDAVIET PV_4.0.0.0.6_Touch
will never be flashed again