i tryed to change os language from italian to english and i put my hp6915 in bootloader mode by copying and executing EnterBl.exe from my device... hard reset says "clearing ok", but the device rests in bootloader mode... i need italian rom in order to reflash the damned thing... of course, a method to bypass language check from english hpruu would be better, but i'd be happy to restore sw... please i need a solution asap... thank you...
i have similar problem MY iPAQ hw6915 is now in bootloader mode i need some firmware to update i cant find anywere, somebody can help?
Hi,
There is a tool which should help! It worked for me. It's called UNI_ExitBootloader
(ftp://xda:[email protected]/Universal/Tools_and_Programs/uni_exitbootloader.zip)
1. download the tool
2. disconnect USB cable from your device
3. disable USB connection in ActiveSync
4. reconnect USB cable
5. wait some 30 seconds
6. run the tool
7. If successful, device will boot itself.
Pawel
this solution is only for UNIVERSAL, not for SABLE, DONT WORK
@pjurczy
thanx a lot your solutin work whit my hp hw6915
thanx thnax thanx
juliog said:
this solution is only for UNIVERSAL, not for SABLE, DONT WORK
Click to expand...
Click to collapse
today i try and 100% work
I'm glad it worked
Pawel
you are the best!!!
pjurczy said:
Hi,
There is a tool which should help! It worked for me. It's called UNI_ExitBootloader
(ftp://xda:[email protected]/Universal/Tools_and_Programs/uni_exitbootloader.zip)
1. download the tool
2. disconnect USB cable from your device
3. disable USB connection in ActiveSync
4. reconnect USB cable
5. wait some 30 seconds
6. run the tool
7. If successful, device will boot itself.
Pawel
Click to expand...
Click to collapse
Yuo are the best!!!
worked for me Thanks!!
Super duper!
Been having sleepless nights. Thanks a lot for your solution. Worked like a charm!
Dam not work with win7 64bit, you have another solution?
Doesn't work in vista or 7
How to disable ActiveSync?
When I connect my HP to PC it recognizes as "HP USB Sync".
I tried to disable that thing in Device Manager, but still getting error from "uni_exitbootloader" program (cannot open usb port... and so on)
What can I do? Please, urgently need advice!
P.S. I firstly tried to update it's rom to english, with sable ruu, got error something like "fail to initialize"; and then my hw6915 stuck in the bootloader screen. tried hard reset, but after "clear ok" it just got back to that HP screen.......
EDIT --> I have just found out that these all methods doesn't work with Windows Vista or Windows 7, so I'm going to get to my brother's computer with XP soon to try another time
So every time you do the flash rom will have to borrow your brother's computer ??
why do not you use WMDC 6.1 for Windows Vista that also supports and works in Windows 7 ??
try to check at http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=14
Hakim Rahman said:
So every time you do the flash rom will have to borrow your brother's computer ??
why do not you use WMDC 6.1 for Windows Vista that also supports and works in Windows 7 ??
Click to expand...
Click to collapse
This one for WM 6.1, what could i do with it? hw6915 is WM 5.1.
Another cool thing, that i have just flashed it with uk rom successfully, with xp.
btw, the computer with xp is half-mine not only brother's.
Related
My friend's jamin when he tried upgrading with smart1 wm6
after the flashing process finished it gives the 3 colors of boot loader
the screen flickers continously with the 3 colors
no way to hard reset the device
and activesync doesn't feel it
I searched all the forum for a problem like this but I didn't find any
any suggestion please, or any help?
Flash NVID Rom and try Smart again. Read WM6 upgrade Manuel and readme for the ROM.
NetrunnerAT said:
Flash NVID Rom and try Smart again. Read WM6 upgrade Manuel and readme for the ROM.
Click to expand...
Click to collapse
Please how can i flash with the activesync doesn't notice my device and where's NVID Rom
Ok. I'll search for it but please help how can I flash it to the device which doesn't recognized or felt by PC
If your device is in bootloader mode, activesync cannot recognize it but this is normal. Jamin is recognize only as a usb device and you can downgrade it to NVID rom easly.
Then you could upgrade your favorite rom, I suggest PDAVIET 4.0.0.1
Bye for now
divxmaniak said:
If your device is in bootloader mode, activesync cannot recognize it but this is normal. Jamin is recognize only as a usb device and you can downgrade it to NVID rom easly.
Then you could upgrade your favorite rom, I suggest PDAVIET 4.0.0.1
Bye for now
Click to expand...
Click to collapse
I think I didn't discuss the problem well
The Problem is when I start to flashing a rom a message tells that check if the usb is connected and if the device is connected .
This is happen with the device is connected to the cable and the tricolor screen is flicking . and the device doesn't open doesn't flashing.
must use NVID rom. maybe qtek nvid one from here? http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
hasanemara said:
I think I didn't discuss the problem well
The Problem is when I start to flashing a rom a message tells that check if the usb is connected and if the device is connected .
This is happen with the device is connected to the cable and the tricolor screen is flicking . and the device doesn't open doesn't flashing.
Click to expand...
Click to collapse
If the problem still there, Try to release the battery for 1-3 hours and put it again to the device, go to the boot loader and pray. Hopefully it could work. Actually, this way worked on my Himalaya and Prophet.
Just run the "Step 1" component of the PDAViet ROM (http://rapidshare.com/files/32728615/Prophet_PDAViet_Step1.zip), which is just a plain AKU 2.20 NVID. This will find your device even if its in bootloader mode (it doesnt depend on activesync). Just flash it with that sucker and you should have a working phone on WM5, then you can safely upgrade it to WM6 (or leave it if you like).
ekto said:
Just run the "Step 1" component of the PDAViet ROM (http://rapidshare.com/files/32728615/Prophet_PDAViet_Step1.zip), which is just a plain AKU 2.20 NVID. This will find your device even if its in bootloader mode (it doesnt depend on activesync). Just flash it with that sucker and you should have a working phone on WM5, then you can safely upgrade it to WM6 (or leave it if you like).
Click to expand...
Click to collapse
I shall try and tell you the result
error 260 this is the result
i have a slight variation problem like this...
1. i was upgrading my O2 Neo to the latest WM05 & the phone went to bootloader mode & the upgrade started searching for the phone as normal..then some error & it stopped upgrading while the phone was in bootloader mode..
2. at that time,i got an urgent call & had to leave the phone in bootloader mode...
3. when i came back..the phone was dead & now it wont startup at all.. not even in the bootloader mode.
4. Maybe the batteries dead...so i charged it (Over night)..nothing happened in the morning..
5. kept the battery removed for about 5-6hours & still nothing happens..it simply does not startup.
6.I've tried holding the camera button & resetting, but it wont go into bootloader mode.
7. i;ve tried holding the connections button + camera button _ reset but it wont hard reset...
can anyone help me here...
what can i do???
hasanemara said:
error 260 this is the result
Click to expand...
Click to collapse
Error 260... If i remember correctly that's "cant find device" or something.
Few things to check:
Is the PC you are upgrading on running windows vista?
If so, use a different PC running windows XP.
Have you tried a different USB cable?
If not, do so, this tends to be the cause of problems like this.
Have you checked device manager?
Go to control panel, Administrative tools, computer management, device manager and see if you can find your device. If it has a yellow ! icon on it or is listed as "Unknown device" or anything like that then you may need to reinstall the drivers (int hsi case the easiest way to do that is to reinstall activesync). If everyhting is working properly it should show up as "HTC USB Sync", "PocketPC USB Sync" or something like that under the heading "Mobile Devices".
Have you just plain tried another computer, regardless of the OS?
I found that I could never get my phone to flash on my laptop, but it worked without a problem on my desktop. This is not to say laptop's cant do it, it simply means some computers just have problems like (in my case i believe) no USB 2.0, or too low-powered USB ports.
ekto said:
Error 260... If i remember correctly that's "cant find device" or something.
Few things to check:
Is the PC you are upgrading on running windows vista?
If so, use a different PC running windows XP.
Have you tried a different USB cable?
If not, do so, this tends to be the cause of problems like this.
Have you checked device manager?
Go to control panel, Administrative tools, computer management, device manager and see if you can find your device. If it has a yellow ! icon on it or is listed as "Unknown device" or anything like that then you may need to reinstall the drivers (int hsi case the easiest way to do that is to reinstall activesync). If everyhting is working properly it should show up as "HTC USB Sync", "PocketPC USB Sync" or something like that under the heading "Mobile Devices".
Have you just plain tried another computer, regardless of the OS?
I found that I could never get my phone to flash on my laptop, but it worked without a problem on my desktop. This is not to say laptop's cant do it, it simply means some computers just have problems like (in my case i believe) no USB 2.0, or too low-powered USB ports.
Click to expand...
Click to collapse
No I didn't change any and I can connect my o2 xda mini to the same cable
I want to ask few technical question
HOW CAN A SOFTWARE DAMAGE THE DEVICE?
CAN A SOFTWARE FOR EXAMPLE BURNS A PROCESSOR OR SOMETHING LIKE THIS?
If So there will be a big problem with those types of devices
a virus for example can destroy my device's board or processor!!
Yesterday My friend went to an I-mate customer service who tel him that
the board had been destroyed by the bad software !!!!!!!!!
Please Give me technical advice about this problem
and is there a web site for him to buy this board (i-mate jamin)?
I've tried everything... even tried it on my desktop... but my phone just wont turn on now. i've kept the battery removed for more than 8hrs now... i've even charged it for more than 8hrs non-stop..nothing happens..
maybe i should get hold of a charged battery & try it with that battery...?
Any clue how to get my phone started??
got it working !!! PHEW... i used my HP battery which was charged & put it into it..now i've got my bootloader & i'm installing the new OS as we speak... 15% done.... keeping my fingers crossed
done.. got my HP Ipaq battery , which was charged & my new started up in bootloader more.. PHEW !!!
66% done... keeping my fingers crossed
ok, installed...now, one more problem..my touch screen's not working...???
Any idea what to do?
i installed "Prophet_PDAViet_Step1"
Any solutions? my computer will recognize at first but then it says not connected and wont let me acess the files on my wing. Im using Windows Vista btw.
Can somebody help me with this problem?
I am using vista also.. try soft reseting it.
I tried soft resetting it and hard resetting it and it still doesn't work. Now I'm contemplating ever getting Touch It 2.3
Try going in settings->connections->usb to pc and either check it if its not checked or uncheck it if it is checked
Mine did this too last week. Reflash your phone with the official Tmobile RUU posted in the forum.
My steps were:
-Go into bootloader mannually (camera button plus voice command button and finally with those two press, click in the hole (between memory and volume key) with your styles)
-After it seems that pc loaded up some kind of driver, double click on the official Tmobile RUU and flash your phone to stock form.
this should work and goodluck...
I've connected my Wing on my friend's computer and it's recognized by his ActiveSync but its Windows XP he's using. Is there any way i can reinstall or change some settings on my computer so that it can recognize my Wing again? I really prefer the windows xp activesync over the windows vista version but theres no way of getting the old activesync on vista.
Finally!! I fixed the problem! I had to install version 6.1 from microsoft's website, and everything is good now. thanks for the help everybody.
do you have the link to that update im having the same problem
nm i got it, thanks for the solution though
Hello Guys,
i am getting crazy witch my ipaq. I downloaded the newest firmware for my uk ipaq. I startet the HP RUU and everything was ok, till my notebook chrashed during the firwmware update....
So my ipaq only hangs on the start screen. What can i do ? I`ve read here in this forum that someone started the SDLoader and the RUU found the ipaq and startet an new update. But i dont get it work, i tried it several times, but my computer doesnt recognize the ipaq ?! (In the Device Manager there is no new usb device)
The Ipaq shows after the SDLoader started: Update Error! Pls Check!
What i doing wrong ? I am getting crazy with this thing !!! Please help, or please can someone give me a tutorial for a noob (i am not one, but now i think i am...) ?
Big THX
P.S.: Sorry for my bad english, i am a portuguese man...
You can check this:
- connect ipaq (running, no matter what error on the screen) to pc, run hp upd utility, try to update
- run SD loader, and the same way - connect to pc, run hp upd
- try hard reset (?)
I hope one of this helps. If no, I have on idea besides hp service.
Regards,
Darek
How i can run the bootloader mode ?
Is this the same as the SD Loader Mode ?
Big THX
I got my baby back, YEAH !
I only flashed the Windows from this Page
http://4pda.ru/forum/index.php?showtopic=79455&st=120
and then Windows-Screen showed up. So then i could install the new firmware again and now everything is ok.
So possible this can help anybody if he bricked his 614c !!
Bye
Hello everyone!
I got a HTC Prophet with english windows mobile. I've wanted to install a german ROM, and used this:
http://www.handy-faq.de/forum/htc_p...ophet_touch_ix_rom_deutsch_download_1005.html
I've runned a .bat file and the installation startet. But then i closed the window with the installation insinde (undeliberate). and now the prophet won't load windows. it always stops at the boot screen, where the infos are:
IPL 2.15.0001
SPL 2.20.0001
I can run the BootLoader mode and connect the Prophet to my PC. on the left bottom it says "USB" but when I run the installation again it says "no device connected".
i got windows 7 ultimate in 32bit version.
I hope you can help me, 'cause it's the phone from my dad and i won't get him angry
Greetings from Germany!
Bianca
geffi said:
Hello everyone!
I got a HTC Prophet with english windows mobile. I've wanted to install a german ROM, and used this:
http://www.handy-faq.de/forum/htc_p...ophet_touch_ix_rom_deutsch_download_1005.html
I've runned a .bat file and the installation startet. But then i closed the window with the installation insinde (undeliberate). and now the prophet won't load windows. it always stops at the boot screen, where the infos are:
IPL 2.15.0001
SPL 2.20.0001
I can run the BootLoader mode and connect the Prophet to my PC. on the left bottom it says "USB" but when I run the installation again it says "no device connected".
i got windows 7 ultimate in 32bit version.
I hope you can help me, 'cause it's the phone from my dad and i won't get him angry
Greetings from Germany!
Bianca
Click to expand...
Click to collapse
Hi this is a easy problem to fix dont worry but first u need to read this http://forum.xda-developers.com/showthread.php?t=353547 you need to hardspl your device first then install the NVID rom in the link read the recovery solutions carefully oh and about active synce try this
Go in to Active Synce settings and uncheck allow usb connections that will help to detect your device when flashing the NVID rom after that just use any flashing tool to install the rom on your device problem solved just read the link if u dont understand as this happened to all of us before so we understand how u must feel
Hope this helps
Heya and thanks for your answer!
I did read the terms of use in the post u linked, but I got always the same problem:
No device is found. on the BootLoaderScreen it says "USB" and Windows 7 detected the Mobile Phone.
But the HardSPL didn't found the phone
I try to take the battery out and put it in after one minute, but it didn't work
geffi said:
Heya and thanks for your answer!
I did read the terms of use in the post u linked, but I got always the same problem:
No device is found. on the BootLoaderScreen it says "USB" and Windows 7 detected the Mobile Phone.
But the HardSPL didn't found the phone
I try to take the battery out and put it in after one minute, but it didn't work
Click to expand...
Click to collapse
Did you try flashing the NVID - AKU 2.* WM5 rom for recovering your Prophet on your device first then hardSPL your device? you need to install the rom first then hardspl it after that flash any other rom here http://www.4shared.com/file/57952591/3955ed98/NVID_RUU.html?dirPwdVerified=2948f2e flash this to your device and remember to uncheck allow USB Connections in active sync and just it should work if u still need more help al be happy to help you out and since ur using windows 7 use this tool to flash any rom to your device ok http://forum.xda-developers.com/showthread.php?t=534707 since am using both vista and xp and they work well so remember flash the NVID rom first then hardspl and try flashing back the rom you wanted to use on your device ok
hey!
i installted Windows XP and then load the HTC Prophet in BootLoaderMode.
I do HardSPL and it works. Then I install thisNVID. The phone rebootet, but windows didn't load. when i try to install the rom (i posted the link in first post) but it says already, that no device is connected.
the phone didn't load windows
geffi said:
hey!
i installted Windows XP and then load the HTC Prophet in BootLoaderMode.
I do HardSPL and it works. Then I install this NVID. The phone rebootet, but windows didn't load. when i try to install the rom (i posted the link in first post) but it says already, that no device is connected.
the phone didn't load windows
Click to expand...
Click to collapse
Sorry but first you need to recover your device by first installing the NVID rom and good u have windows xp did you did what i said about active sync uncheck allow usb connects then flash the NIV rom then use lazytool thats what i use on my windows xp to flash the rom u wana use what happened when u try to install the NVID rom? first you must manualy go too the bootloader menu in other to flash it you know reset the device and hold both the commanager and camura button until you enter the bootloader menu then flash the NVID rom if it works then do a hardspl then flash any roms using lazytool it should work when u said the phone rebooted but windows did not run what did you see on the screen? after the reboot? also the NVID rom is windows mobile 5 so you device should boot up windows but al look into this for you ok
PS this is important you should know that your device is G3 or G4 and from the looks of you spl it looks like a G4 device this is very important beouse if u flashed with G3 you can damage ur device but dont worry the guys here have managed to fix this so if ur flashing any rom use the G4 option ok but please look over these instructions http://forum.xda-developers.com/showthread.php?t=353547 as they helped me when i had the same problem
I just Private message you check ur inbox
Hello I have a big Problem I think but I hope someone can help me.
I flashed a NAND.now i want to flash an new Android version with CW but when i enter the USB Flasher mode my pc is doing three sounds instead of the normal usb sound.I can see the MAGLDR in device Manager.
so long for the first Problem.
my second problem is when i run DAF.exe from the CW
i get 2 errorsrogram can not start because RAPI.dll is not on the computer.
I hope someone can help me.
ps:sorry for my english ^^
dmx489371 said:
Hello I have a big Problem I think but I hope someone can help me.
I flashed a NAND.now i want to flash an new Android version with CW but when i enter the USB Flasher mode my pc is doing three sounds instead of the normal usb sound.I can see the MAGLDR in device Manager.
so long for the first Problem.
my second problem is when i run DAF.exe from the CW
i get 2 errorsrogram can not start because RAPI.dll is not on the computer.
I hope someone can help me.
ps:sorry for my english ^^
Click to expand...
Click to collapse
Hi,
Make sure you have the latest version of ActiveSync in XP or WMDC in Windows 7 installed.
Or in Vista/Windows 7 to right click and run as Administrator
Resovled
malybru said:
Hi,
Make sure you have the latest version of ActiveSync in XP or WMDC in Windows 7 installed.
Or in Vista/Windows 7 to right click and run as Administrator
Click to expand...
Click to collapse
.
Thanks for the post!
This will do it
Thank you. Problem is solved.