Related
I was curious. I've noticed people said that if you put the 4.00.16 ROM on, the only way you can downgrade it, is if you reprogram the ROM from the SD card and not by the EXE method.
I was curious as to WHY? What does that .16 ROM do to the XDA to prevent you from doing an EXE rom reprogram?
So far, we lacked time to look into this one. Tell us, and we'll see if we can fix it.
Downgrade unseccesful using SD method from 4.00.16 ver
Sorry if this is OOT: I'm a non techie person so please somebody explain me how to use the SD card reflash metod to downgrade from 4.00.16 bact to 4.00.11 version. If write the new rom to sd using XDAtools it's done. after it I put it back the SD card back to the XDA. I enter the wallaby 5.17 screen by pressing power+ soft reset button. It said wait and then GSM ok after that freezze.
What I'm missing?
The why, I can't say as I have not investigated in detail, I just said to heck with it and bought a SD writer.
What happens after you load 4.00.05 and 4.00.16 is when you try to run and upgrade/downgrade/re-install from Prgramme-A or the newer programmer that came with the 4.00.x installs it fails saying it can't connect to the device, please check to make sure it's plugged in (even though there is a active connection with Activesync).
Using the SD card there is no issue with running the upgrade.
-rich
but what is it that .16 has that .11 doesn't that stops you from changing ROMs via the EXE method?
Also, after putting on .16 and you go back to say .11 via the SD boot method, are you able to use the EXE method to change ROMs after that?
Currently I use the AT&T A20 radio stack and was thinking about trying out the Tmobile 6.24 to see how it works out. Haven't decided yet.
Investigating the no reflash .EXE method
Ok I have found a roundabout method to resolve this only using the .EXE method.
I used the rom kitchen to generate me a 4.00.11 ENG WM2003. After flashing my phone and wanting to make sure i could revert I tried my origonal o2 provided flash upgrader "Radio_Unit_Upgrade_v31413.exe" and the latest downloaded one from the o2 website "Radio_Unit_Upgrade_v31703.exe" neither of which would let me flash them - i get the error "this rom is not for this device" (or some such).
I went back to the rom kitchen and built myself a 3.17.03 ENG O2-Euro rom image and flashed that onto the phone. this suceeded where the o2 stock .EXE failed and I was nearly back where I started.
Now that I had my rom kitchen 3.17.03 back on I tried to install the latest "Radio_Unit_Upgrade_v31703.exe" file again and was greeted with sucess once more!
The question this begs is the same as the origonal however, ok we can get the stock provider rom back on - but why will it let me flash the rom kitchen 3.17.03 back on and not my o2 downloaded rom? Hopefully the developers will be able to spot whats going on and sort it out in the kitchen (hopefully removing what ever right protection the new rom installs).
Hope this helps, shout if you want me to test with a specific rom version (for uk / europe phones) and ill give it a whirl for ya
I think the "official" rom checks for versions, whereas the roms from the kitchen use a modified bit of code called "adaptrom" to fool the software. I wish I had a tenth of the capabilities of the guys on here that work out all this stuff.
cruisin-thru said:
I think the "official" rom checks for versions, whereas the roms from the kitchen use a modified bit of code called "adaptrom" to fool the software. I wish I had a tenth of the capabilities of the guys on here that work out all this stuff.
Click to expand...
Click to collapse
I'm not sure about this, but i will give you some hint, ok :?
The T-Mobile Rom has a protection to it that you can not upgrade any ROM except T-Mobile ROM's other than that if you have a version of rom that is not T-Mobile ROM you can use the adaptrom to normally update any kind of ROM because adaptrom ignores the Version like PW10A1:007, the explanation of this versioning is in this forum(some kind of country and GSM band 1800/900, 1900/900).
Now why we have to use SD card after we update T-mobile ROMs, if we want to change to another kind of ROM's, because if we use "exe" or sometimes we called it "Program A" it checks the version of the ROM's, since the adaptrom can ignore only the version of the ROM's it can ignore the Type of ROM's, if it is T-Mobile or other ROM's, now for SD card it doesn't check for any version or type, and it goes directly to updating the ROM's in the Bootloader way or we can call it forcely updating the ROM'
s.
Hop this help.
Hi Guys,
I need your help .
I've downloaded the 4.00.16 ROM by mistake, it really didn't tell the ROM number, so now I want to revert to a earlier one and I can't.
I've got the following message: "ERROR: GetDeviceData - An established connection was aborted by the software in your host machine.
error getting devicedata"
and then
"ERROR 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR. Cannot execute the remote communication program. Please make sure that the USB/Serial cable is properly connected."
Stupidly, I haven't got a SD card. :evil:
PLEASE HELP ME, I'M REALLY STUCK NOW AND DON'T KNOW WHAT TO DO...
Read the above post that starts like:
"Ok I have found a roundabout method to resolve this only using the .EXE method"
HTH
Qman said:
Read the above post that starts like:
"Ok I have found a roundabout method to resolve this only using the .EXE method"
HTH
Click to expand...
Click to collapse
Hi Qman,
No matter which ROM I cook, when I try to install it using the .EXE it gives me the message I posted before.
Would you explain to me, idiots guide, how to flash not using a .EXE?
or, have you got any sugestions?
I am trying to upgrade my Siemens SX56 to ROM 3.17 from Yorch.net,
I did the following:
1. Backed up the current ROM using OSImageTool.exe
2. Downloaded ROM 3.17 from Yorch.net in a .exe file format
3. Clicked on the downloaded .exe and I get the following error message:
Cannot find the ROM image to upgrade your Pocket PC. Please download and try again.
Please help, I am a newbie!
1st mistake...DONT USE AN EXE to upgrade. Use the sd card method. Otherwise you will be screwed.
When I select zipped NK.nb1 (SD-card flashing) I get the following error:
./mkrom.sh: ../../kitchen.local/mkrom-inc.sh: No such file or directoryno files for configid 26220739Cannot fit files in given sectionsError splitting files
:shock:
From what you posted it appears theres a problem within the Kitchen,
try back later!
HTH
Where else can I get 3.17 , the only kitchen I found was Yorch.net
Now the log shows:
adding: NK.nb1zip I/O error: No space left on device
zip error: Output file write failure (write error on zip file)
Click to expand...
Click to collapse
I'm guessing that the kitchen needs to have old results purged occasionally (possibly manually?).
Strange I used it earlier to get stock ROMs and I did all of them with no problem. Hmmm
jgalindo said:
Where else can I get 3.17 , the only kitchen I found was Yorch.net
Click to expand...
Click to collapse
You can use the XDA developers Special Edition ROM v1.2 its based on the same ROM.
XDA developers Special Edition ROM v1.2 can be found at:
http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe
HTH
Ignore my last post. I went back and was able to cook a 4.00.16 ROM, so it's not a server disk space issue (like the error message made me think).
And I just cooked a 3.17.03 ROM. Guess it might be back.
Thanks a lot guys, I'm still trying with no success. :x
I just realized Vallerhum has the setup I want, I also have a Siemens SX56 on ATT. Where did you get your ROM?
I got it from Jeff's kitchen before it went south. I am trying to get my own up for I have all of the ROMs to date.
Is your phone also unlocked?
How can I get your ROM? I am going to another country on Friday and need to unlock it before then so I can show off to my friends
No my phone is not unlocked. I am not planning on changing companies anytime soon but if you want to unlock it...just load the 3.17 rom or if you have ppc2002 just install the xda unlocker and then install the ppc2003 rom of your choice. However, always use the sd card method, dont use an .exe.
I was able to cook a ROM! This site is great: http://www.zensay.com/qtek/ceupgrade.html
Thanks all for your help!
Now, I'm playing around with other stuff and seeing If my unlock was successfull.
That site is not a kitchen. It is for teaching how to do an SD card ROM upgrade. Where did you cook (or download) your ROM? Cooking is the customization of ROMs with other softwares.
well i made this a while ago, and finally got around to get it fully tested and release it.
this HardSPL is based on version 1.26 SPL. and is version 2 (2.00.cmon). also i *think* this one will not hard reset the phone
it's for any OPAL***** modelid now,
thanks to wlinsong and PhamQuang for testing
instructions:
0a) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/...fd-ae52-4e35-b531-508d977d32a6&DisplayLang=en
0b) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
1) download Hard-SPL package from attachment, extract to an empty folder (Opal_HardSPL_v2_0.zip).
2) you must have the phone synced with your PC, i.e. device must be in Windows Mobile!
3) run Opal_HardSPL_v2.exe.
4) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
5) device should go to a grey screen
6) go on with RUU, Hard-SPL flashes, device automatically reboots, job done.
7 ) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 2.00.cmon
+1: if the screen won't go to grey mode (SSPL), then try manually entering SSPL by using the Opal-SSPL-Manual.zip - run the EXE on the phone then when it went to grey screen, run the HardSPL exe on PC and flash.
finally, donations are always appreciated to the "To Cmonex" link in my signature
now, enjoy the hardspl and cooked roms
UPDATE: How to flash stock SPL back for warranty purposes - please use this only if you need to return device for repair!
steps:
0. first flash entire stock ROM, then after that you can flash stock SPL as *last step*. do not reverse this flashing order please
1. get the RUU_Signed.NBH file from attachment (opalstockspl126.zip (185.3 KB))
2. run hardspl package from attachment (Opal_HardSPL_v2_0.zip)
3. *after* Opal HardSPL EXE extracts files, replace extracted RUU_Signed.NBH with the one from opalstockspl126.zip i.e. when asked to overwrite, say Yes, if it doesn't ask, then you are trying to copy it before running the HardSPL EXE, which is the wrong order.
4. flash just like you flashed HardSPL (see original instructions above)
5. device reboots, you can now check if it says 1.26.0000 or still 1.26.cmon or 2.02.cmon, in the latter case you did something wrong, it has to show 1.26.0000.
Great work, thanks for CMONEX !!!
I don't fully understand what this is for, but looks important soo THANKS
lupacche said:
I don't fully understand what this is for, but looks important soo THANKS
Click to expand...
Click to collapse
it's to allow you to flash any rom PhamQuang is already cooking some rom for opal i believe
OPAL10000 modelid
how do i check modelid?
FINALLY!!!!Congratulation !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
cmonex said:
well i made this a while ago, and finally got around to get it fully tested and release it.
this HardSPL is based on version 1.26 SPL.
it's for OPAL10000 modelid, if anyone has a different model, report in this thread... those should be tested out before doing anything.
thanks for wlinsong and PhamQuang for testing
instructions:
0a) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/...fd-ae52-4e35-b531-508d977d32a6&DisplayLang=en
0b) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
1) download Hard-SPL package from attachment, extract to an empty folder.
2) you must have the phone synced with your PC, i.e. device must be in Windows Mobile!
3) run Opal_HardSPL_v1.exe.
4) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
5) device should go to a grey screen
6) go on with RUU, Hard-SPL flashes, device automatically reboots, job done.
7 ) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 1.26.cmon
+1: if the screen won't go to grey mode (SSPL), then try manually entering SSPL by using the Opal-SSPL-Manual.zip - run the EXE on the phone then when it went to grey screen, run the HardSPL exe on PC and flash.
finally, donations are always appreciated to the "To Cmonex" link in my signature
now, enjoy the hardspl and cooked roms
Click to expand...
Click to collapse
Thank for your hard working, but there's new issue occour.
When I tried to dump the hardspl, the error message appear"image file corrupted", then the work has been ceased.
If you have any idea about it, please kindly guide me!!
dpauser said:
Thank for your hard working, but there's new issue occour.
When I tried to dump the hardspl, the error message appear"image file corrupted", then the work has been ceased.
If you have any idea about it, please kindly guide me!!
Click to expand...
Click to collapse
Heihei~~ Just read the guide instruction carefully, I have fixed the problem.
And currently, I flashed a HK Rom code on my device.
However, I found a new issue. The this device has Compatibility with the BT ear price. I'm using a Itech D-Clip Radio one. When the call is coming, the call will be actived.But after the call, the BT connection will disconnect.
Any one has idea about this? Thanks a lot to all.
itaychi said:
how do i check modelid?
Click to expand...
Click to collapse
see bootloader screen (tricolour) it will say OPAL100 or similar... if the number is 100 then ok. if not, post in this thread
EDIT: oops, possibly for opal there is no modelid displayed there (could someone verify - i dont have an opal). use getdevinfo in mtty. but easiest is just try the spl package and if you get modelid error, post.
Hi cmonex, can you please make a HardSPL for the Touch 3G (Jade).
congratulations
hope to get fresh news on blackstone
thanks Cmonex
can it be used for htc T2223?
another question:
Can the rom upgrade file in the following link be burnt into my htc t2223?
http://www.htc.com/hk-en/SupportDownload.aspx?p_id=175&cat=2&dl_id=422
hi cmonex ! i've try ur hardspl , and i got a problem , my VIVA is hardspl now , but i try to use NBHTOOLS to dump the os.nb out of a WWE official rom and then use htc rom tools to rebuild a nbh file, but can not flash in to my viva . but i try flash that original official rom ,it works , is it my bad ? something i miss?
here is my htc rom tool setting:
[Opal]
ModelId=OPAL100**
SignMaxChunkSize=64
SPL=$200
SPLN=SPL
Splash1=$600
Splash1N=Splash
Radio=$301
RadioN=Radio
System=$400
SystemN=System
when i flash my edit rom , the ruu erro is "code 270 Updata erro the image is incorrect"
thanx alot for your hardwork
terry888_1978 said:
hi cmonex ! i've try ur hardspl , and i got a problem , my VIVA is hardspl now , but i try to use NBHTOOLS to dump the os.nb out of a WWE official rom and then use htc rom tools to rebuild a nbh file, but can not flash in to my viva . but i try flash that original official rom ,it works , is it my bad ? something i miss?
here is my htc rom tool setting:
[Opal]
ModelId=OPAL100**
SignMaxChunkSize=64
SPL=$200
SPLN=SPL
Splash1=$600
Splash1N=Splash
Radio=$301
RadioN=Radio
System=$400
SystemN=System
when i flash my edit rom , the ruu erro is "code 270 Updata erro the image is incorrect"
Click to expand...
Click to collapse
flash the radio as 0x300..
dr33 said:
can it be used for htc T2223?
another question:
Can the rom upgrade file in the following link be burnt into my htc t2223?
http://www.htc.com/hk-en/SupportDownload.aspx?p_id=175&cat=2&dl_id=422
Click to expand...
Click to collapse
if htc T2223 is htc viva, then yes
cmonex said:
flash the radio as 0x300..
Click to expand...
Click to collapse
but i've tried flash the os only , still not work ! u means i need to add the radio into it?
Stickied.
Ta
Dave
terry888_1978 said:
hi cmonex ! i've try ur hardspl , and i got a problem , my VIVA is hardspl now , but i try to use NBHTOOLS to dump the os.nb out of a WWE official rom and then use htc rom tools to rebuild a nbh file, but can not flash in to my viva . but i try flash that original official rom ,it works , is it my bad ? something i miss?
here is my htc rom tool setting:
[Opal]
ModelId=OPAL100**
SignMaxChunkSize=64
SPL=$200
SPLN=SPL
Splash1=$600
Splash1N=Splash
Radio=$301
RadioN=Radio
System=$400
SystemN=System
when i flash my edit rom , the ruu erro is "code 270 Updata erro the image is incorrect"
Click to expand...
Click to collapse
terry888_1978 said:
but i've tried flash the os only , still not work ! u means i need to add the radio into it?
Click to expand...
Click to collapse
terry ,
I've got the same problem as you.
vivi
terry888_1978 said:
hi cmonex ! i've try ur hardspl , and i got a problem , my VIVA is hardspl now , but i try to use NBHTOOLS to dump the os.nb out of a WWE official rom and then use htc rom tools to rebuild a nbh file, but can not flash in to my viva . but i try flash that original official rom ,it works , is it my bad ? something i miss?
here is my htc rom tool setting:
[Opal]
ModelId=OPAL100**
SignMaxChunkSize=64
SPL=$200
SPLN=SPL
Splash1=$600
Splash1N=Splash
Radio=$301
RadioN=Radio
System=$400
SystemN=System
when i flash my edit rom , the ruu erro is "code 270 Updata erro the image is incorrect"
Click to expand...
Click to collapse
%1 Get a error270,image file corrupted!!!
htcrt.ini
[Opal]
ModelId=OPAL100**
SignMaxChunkSize=1024
SPL=$200
SPLN=SPL
Splash1=$600
Splash1N=Splash
Radio=$300
RadioN=Radio
System=$400
SystemN=System
Hii i have elfin and not unlocked my elfin but still i can load any rom in my elfin have loaded 6.1,6.5,and many more.
Want to know will be posting procedure to SAFELY can be loaded in to your HTC MOBILE
miteysh.
mitesh20360 said:
Hii i have elfin and not unlocked my elfin but still i can load any rom in my elfin have loaded 6.1,6.5,and many more.
Want to know will be posting procedure to SAFELY can be loaded in to your HTC MOBILE
miteysh.
Click to expand...
Click to collapse
can u please put a little more light on this
mitesh20360 said:
Hii i have elfin and not unlocked my elfin but still i can load any rom in my elfin have loaded 6.1,6.5,and many more.
Want to know will be posting procedure to SAFELY can be loaded in to your HTC MOBILE
miteysh.
Click to expand...
Click to collapse
couple of questions I wanna ask u..
1. when u bought ur device was it a brand new one or a used one??
2.are u sure ur device is not locked?? did u check you your IPL??
3.what is your IPL/SPL compination??
hope that's not much.. thanks
and by lock, are we talking about cid-lock or sim-lock?
crapula512 said:
and by lock, are we talking about cid-lock or sim-lock?
Click to expand...
Click to collapse
Yeahhh... i was thinking about it too
Answers!!!!!!
I bought my elfin in the year 2008.
not knowing how to use after few months i flashed elf rom and found that my device was restarting and of no use....
i learned about unlocking from this website after seating hours and hours.
i have gsm one.
elfin.
How to flash any rom...
I have original rom loaded and with ipl/spl of 2.xx
but now i have ipl/spl 3.14.com.
loaded more that 100's of roms of 6., 6.1, 6.5.
any rom.
first of all you need to know your device configuration to load any rom.
if you have detailed configuration then you can load it.
currently loaded wm6.5 28011 onyx. rom.
radio : 3.34
procedure!!!!!!
i will be enclosing the safe procedure for flashing...
no worry.....
you will learn to load and make your own flash...
give to few days time..
mitesh20360 said:
I have original rom loaded and with ipl/spl of 2.xx
but now i have ipl/spl 3.14.com.
loaded more that 100's of roms of 6., 6.1, 6.5.
any rom.
first of all you need to know your device configuration to load any rom.
if you have detailed configuration then you can load it.
currently loaded wm6.5 28011 onyx. rom.
radio : 3.34
Click to expand...
Click to collapse
if your spl says spl 3.14.com.... it means you have done HSPL... and thats the normal thing everybody do to go in for safe cookedroms flashing..
sorry bro there is nothing special about your case
opss!!!
but i have changed he ipl/spl/radio/flashed/many roms/ changed pagepool file/ all that can brick a fone..
i have recently edited the onyx rom 6.5 28011 and flashed for my htc
if you want you can also just i will put links n procedure to flash the rom.
ok. so will you put the links to the procedure. well coz after upgrading ur spl/ipl you can flash any rom you want.
reply
srgudhka said:
ok. so will you put the links to the procedure. well coz after upgrading ur spl/ipl you can flash any rom you want.
Click to expand...
Click to collapse
well
i not that i can load any rom my making rom.
like wise any specific rom i s made for specific mobile so as i make any rom specific for my mobilbe and even fon's battery level is 10% then also i can easily flash rom its in secs. and easily configure my cell easily..
mitesh20360 said:
well
i not that i can load any rom my making rom.
like wise any specific rom i s made for specific mobile so as i make any rom specific for my mobilbe and even fon's battery level is 10% then also i can easily flash rom its in secs. and easily configure my cell easily..
Click to expand...
Click to collapse
rather than keeping it a secret you should share your knowledge. everyone know one can cook a rom and flash it on his mobile. i suggest please be clear with your english.
no secret
sorry for my bad english.....
give me few days i will have to give link to software and procedure.
if any thing goes wrong with procedure then cell will brick and have hard format with no data in it.!!
so
its not any secret it is for knowledge.......
any can do it...!!!
Procedure for flashing (how i am flashing rom)
I have phone elfin 128mb ram.What you want softwares:
1) device info software for information regarding your device.
2) rom extractor... htc rom image editor version 0.4.0.51
AnDim
3) ROM builder. With this tool you can build a ROM (*.nbh)
from a rom parts (*.nb) in a comfortable interface.
by - Alexander "Dark Simpson" Simonov.
you can flash rom compatible with your CID (country/caller id) i.e. rom that you are going to flash must have cid of your phone.
steps:
Connect your Phone and establish Activesync Connection
find following for flashing:
Device ID : ELF0******
CID : ur cid. of phone.
GSM.nb radio file
IPL_H3.nb ipl h3 file
OS.nb os file extracted from built rom.
SPL.nb spl file
For deviceID you need to have software called deviceinfo.exe
http://forum.xda-developers.com/showthread.php?t=418892&page=18
download link: http://forum.xda-developers.com/attachment.php?attachmentid=129675&d=1258726424
then download any rom say onyx 6release. latest.
http://www.mediafire.com/?vjey0kz5ng0
then you will get RUU_signed.nbh
extract OS.nh from RUU_signed.nbh
save to one folder.
then you will need.
GSM.nb radio file
IPL_H3.nb ipl h3 file
SPL.nb spl file
extract same from follwoing links:
radio: http://forum.xda-developers.com/showthread.php?t=527048
choose as per yuor choice.
same extract
GSM.nb from *.nbh and save to folder.
similarly do for ipl/spl.
so you have following files needed for making your compatible rom:
IPL_H3.nb ipl h3 file
SPL.nb spl file
GSM.nb radio file
OS.nb os file extracted from built rom.
Step 2:
Now make rom for your elfin
you need to have software called
ROM builder. With this tool you can build a ROM (*.nbh)
from a rom parts (*.nb) in a comfortable interface.
Alexander "Dark Simpson" Simonov
link:http://www.real-radio.ru/htcrt/download/htcrt.zip
download the tool run in your pc, a pic that i have attached of that software.
then
run htcrt.exe
then start,
then ROM builder,
choose ur phone.
in that choose the relevant options for your phone/requirement
put Model ID:, Country ID:, Version: 3.14.706.02
language:WWE
firmware contents:
load all that you have stored in your folder the files you want.
IPL_H3.nb ipl h3 file
SPL.nb spl file
GSM.nb radio file
OS.nb os file extracted from built rom
then press
Build!
you will find that you have give name to your file named it
RUU_signed and it will make rom for your phone.
after it is completed it shows everythings seems to be ok
then close you have build your own rom compatible with your mobile.
RUU_signed.nbh
now flash it to your mobile.
how will you?????
steps:
have custome ruu files in one folder
following files must be there:
RUU_signed.nbh
EnterBootloader.exe
ErrorBattery.fig
ErrorUSB.fig
ModelID.fig
rapitool.exe
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
Temp.bat
then run
ROMUpdateUtility.exe..
must connect your phone through usb.
start your phone pressing camera key you will see triple colour screen showing ipl/spl/
blue,green,red.
flash it from pc.
after every thing is over your will get message update complete.
your will get your rom flashed. but every data before flash must be back up.
this is bit lengthy but easy to use and flash....
if found probs reply me
well good one. tried it. works. but this is a lengthy process. rather dont you think cid unlocking it once will allow you to flash as many roms as you want. once you have unlocked it you just need to a custom ruu and a rom file. thats it. rest you know how to go about. i appreciate your method.
edit: wrong post - plz delete
Salve! I have a SIM lock Elfin KPN Netherlands. You can unlock? Not allow me to rewrite the IPL and SPL.
Hi,
I've download the new official rom for HD2 from htc site. Is a .exe. But when I click on it its gives me an error like: directory error or something likes it. Maybe because I've a coocked rom or hspl and not spl? How can I resolve that problem? I tried to run on htc and on computer with active sync but it doesn't work
Thanks!
Use the search! This is covered even with a video tutorial in one of the stickies. Now go find!
Maybe i'm idiot but i can't find it searching with "official rom error install" or "official rom error directory" and so on... Especially in sticky I don't see anything that can help me, maybe is for my horrible english. i'm sorry for my incompetence.
The Nameless said:
Hi,
I've download the new official rom for HD2 from htc site. Is a .exe. But when I click on it its gives me an error like: directory error or something likes it. Maybe because I've a coocked rom or hspl and not spl? How can I resolve that problem? I tried to run on htc and on computer with active sync but it doesn't work
Thanks!
Click to expand...
Click to collapse
You need to screenshot the error and let us see it. I'm afraid "directory error or something" really doesn't help us help you.
rom update
The Nameless said:
Maybe i'm idiot but i can't find it searching with "official rom error install" or "official rom error directory" and so on... Especially in sticky I don't see anything that can help me, maybe is for my horrible english. i'm sorry for my incompetence.
Click to expand...
Click to collapse
if you have hspl installed there is no difference between custom or official rom flashing. go to the rom developement page and you can find very nice visual guides and videos about everything you need to know.
Yes, I've Hspl installed.. I see a lot of video and I flashed a lot of roms before but this error I've never had before....
I post errors it gives me...
Thanks a lot.
The Nameless said:
Yes, I've Hspl installed.. I see a lot of video and I flashed a lot of roms before but this error I've never had before....
I post errors it gives me...
Thanks a lot.
Click to expand...
Click to collapse
I'm a little concerned about the folder from the first screenshot. It says the ROM is in the folder G:\?HTC HD2?\.... That surely isn't correct. Try moving it to a different folder and running it again.
If not, it may have been corrupted when downloading. I know it doesn't happen often, but it does happen.
Just my thoughts.
Huh... just try to rename the exe to some simpler name like ROM.exe, those ?s look like there are some weird characters in the name, they'd have nothing to do there...
Or probably the download failed, if the rename doesn't work just redownload the file.
This has nothing to do with what you have on the phone, it's the PC not being able to run the ROM updater.
What Windows version?
The folder is a usb key, but i try to run it form desktop or a different folder and it gives me same errors.
I just try to download again (three times) the file. Maybe is corrupted himself, but I don't think that I've downloaded it corrupted three times
Windows xp
I renamed file and it works! What noobs thing XD
Thanks a lot!