Back camera: white dots - Touch Dual, MDA Touch Plus General

I have problem with my back camera. When I take photos with my back camera, I find 4 white dots. So I have taken another shot against a black background, as per attached image. However, with front camera, it's OK. My radio is 1.58.16.27, with stock ROM.
Anyone with this problem? Please help

this is going to sound silly, but...
Remove the back cover and clean the lents with a cotton swab.
:S
If it doesnt work then those grains are problably inside.

Did you find a solution to this?
I have the same problem - I've tried cleaning the lens, but it's made no difference.

Related

8125 white screen, vertical lines, won't start up

I have flashed/reflashed it with many ROM's and no change. This has to be a hardware issue. This usually happens when I leave it in my back pocket and sit on it (I don't weigh that much.) I have tried to soft/hard reset and no luck. When it does turn on, it will start up and after everything has loaded it fades to a white screen. I have noticed that when I take it apart, all the way to the screen and put it back together, it works. I have read the post about the rip in the screen connector cable. But after inspecting mine, I could not find any rip.
Also, people are having trouble hearing me when I'm on the phone with them. this seems to be an issue with the mic. I have heard of other people on here with the same issue but no resolution.
8125
ROM 3.08
Unlocked and stuff
Try loosening up the screws that attach the LSD to the front panel. That is what worked on mine.
LSD? are you talking about the sliding device? Cloud you please be more specific? is this for the screen or the mic?
Thanks
I'm sorry, I meant LCD(don't even want to think about what kind of freudian slip that was).
But you know when you take it apart, the front of the phone, where the LCD is attached. There are 4 screws to get inside that front casing then there are 4 screws holding it on to the front casing on the inside.
I slightly loosened all 8 screws (the 4 on the inside and when I closed the casing back, those 4 also) and the white screen stopped when I got the phone back together.

HD2 camera problem - pink color

My phone fell down on floor few week ago and from that day my photos are pink/purple. When I start camera it show picture ok for few milliseconds and turn to pink/purple. Also when I take photo I hear some noise in camera and photo is all pink/purple. But when I take photo with flash I got photo with texuture but its pinkish. Same as with video camera. These two are takken on same location with flash and no flash.
Do you know solution for my problem. I changed few roms and problem stays.
Shoul I change hardware?
What part should I change?
Whole camera or just this square camera module?
Or any other solution...
I think it s a fault of the camera itself...You can start opening the hd2,it s very sinple to reach the camera,you have only to take off 4 screws,and controll the little cable that go to the motherboad,and take off and reinsert the camera module.If you need the camera you can contact me in pm,I have one working from a faulty hd2,and I can give it to you for really cheap.
OK thanks on answer. I already opened HD2 so its not to complicated for me. I can change parts. The problem is I dont know which parts do I need to change. So you are saying that I need to change only camera module. This one on photo bellow is camera module? Am i right?
So I ordered this camera module online..Hope that will fix the problem!
It seems that this is rare problem with camera.
IS there Anyone else that knows solution to this problem?
Grateful

Help with broken screen

Yesterday, my note 3 made a fall from a slip in my hand, and now, there's a little crack at the top left on the screen. The screen is not turning on, and I think it is no more registering touches.
Amazingly enough, the glass protector does not have any scratch, but I can clearly see small crack in the LCD behind.
The sound is working fine.
I have already opened the case and have unplugged and re-plugged the connections, still no change.
My question: I want to confirm whether the screen and digitizer have been damaged. Any ideas/ advise on how to confirm this ?
Basically, I want to go ahead and buy a screen and digitizer replacement and perform the change, and I didnt want to invest on something which might not be needed.
Please provide your help and views guys.
Thanking you all.
Screen fixed. Camera issue
Just to post an update.
I had ordered a screen and digitizer for my N9005. Yesterday, with a rather fast shipping, it got delivered.
I carried out the swap, ie, removed all sensors, camera, vibrator, mainboard from my existing and transfer to the new screen/digitizer.
All went okay, screen, touch, all sensors, front cam.
Just that my rear (main) camera shows some artifacts on the image - on the camera screen and the photo taken. See attached.
It seems like it is showing some piece of glass fractured or scattered. Any help on how to proceed from here ?
I was trying to remove the middle plate (where the outer lens is found), so see whether this lens is broken, but as per my tests, I see that the phone refuses to power on once this plate is removed.
Info: The photo attached is when I pointed my camera to shoot over a white wall.
Any help is welcome, please.
Nitish

Problemes on LG F320L help

Hello
I just get a LG G2 F320L, but for three days I noticed a few things that do not work:
the camera or the rear camera; his makes me fuzzy images, even when I want to film a video, the video shakes, even if I want to take a picture, the rear camera shakes alone, I tried to lower ISO, quality, mode, but not many changes, when I'm close to the subject or the object that I want to photograph, his pass! but when he is away, it is a problem (if the images are attached)
Here are some pictures when I take a picture of something that is near
http://i.imgur.com/79GBL4w.jpg
http://i.imgur.com/mqm05Ns.jpg
http://i.imgur.com/35OKQVU.jpg
when I take a picture that is a bit far, I notice that tremble as if the lens
http://i.imgur.com/ZuiPcFn.jpg ( see the word "sony" )
http://i.imgur.com/dp2Lclh.jpg
brief when I want to shoot a picture normally I find great difficulty, although the green rectangles appear, the picture is blurred, as if the lens vibrates
Up plz
thibistin said:
Up plz
Click to expand...
Click to collapse
Looks like a hardware defect or Parkinson's. Maybe you could try taking a picture using a stand/table and place the phone carefully against something like a book to take a perfectly still picture?
I tried what you said but the camera shakes alone,
Choristav said:
Looks like a hardware defect or Parkinson's. Maybe you could try taking a picture using a stand/table and place the phone carefully against something like a book to take a perfectly still picture?
Click to expand...
Click to collapse
I tried what you said but the camera shakes alone,
I bought f320k model from aliexpres and I have the same problem. I had before d802 and camera has been much much better.
I had the fuzzy and shaked pictures problem too, but I figured that the problem is the magnet of the speaker... The camera has its own magnets to control the lens, but the speaker magnet is very close, so this "interference" causes that the camera dont focuses properly... My fix was put a layer between the camera module and the speaker, and now the camera works like new!

Black Shark 2 Camera Problem (There is a black gap at the top on 16:9)

Hi Guys, i have a problem with my bs2
whenever i tried to open the camera, there is a black gap at the top, but weird whenever i used another apps like google lens and etc, the black gap is disappear.
i already try to factory reset and still no luck for this
please take a look at the screenshot below
Screenshot here.
and second the slowmotion features is a time lapse, i tried to capture 10 sec but its move so fast.
please help me for this, im quite clueless here.
Thanks and Regard for you guys
Mike
It shouldn't be full screen. The black bars are intentional. The screen is 19.5:9. You're taking pictures in 16:9. If Lens and others show full screen, then they are either cropping after, or the images aren't being taking in 16:9 ratio.

Categories

Resources