Trying to recover a bricked g4 wizard stuck at the splash ( radio section reporting version at boot so assume it's not a CID / security area issue) and I can only find the shipped rom to try flashing via bootloader which it rejects as being too old.
Anyone got a rapidshare link for v2.21.4.101 please? Searching on the boards points to o2 and o2 in their infinite wisdom no longer host it, or rapidhsare with out of date files.
Thanks.
M.S
Mysterious Stranger said:
Trying to recover a bricked g4 wizard stuck at the splash ( radio section reporting version at boot so assume it's not a CID / security area issue) and I can only find the shipped rom to try flashing via bootloader which it rejects as being too old.
Anyone got a rapidshare link for v2.21.4.101 please? Searching on the boards points to o2 and o2 in their infinite wisdom no longer host it, or rapidhsare with out of date files.
Thanks.
M.S
Click to expand...
Click to collapse
What were you trying to do when this happened,were you trying to flash another rom ? which rom you were trying to flash ? what IPL/SPL it displays now.well if it gets into bootloaders its certainly not bricked.
You can download the official O2 v2.21.4.101 from here :-
http://www.megaupload.com/?d=BTSJK5C0
zabardast_1 said:
What were you trying to do when this happened,were you trying to flash another rom ? which rom you were trying to flash ? what IPL/SPL it displays now.well if it gets into bootloaders its certainly not bricked.
You can download the official O2 v2.21.4.101 from here :-
http://www.megaupload.com/?d=BTSJK5C0
Click to expand...
Click to collapse
Thanks. A collegue had tried wm6 and botched it so gave it to me to try to fix as 'i know about these phones' apparently ;-)
The only rom I could find from o2( unit isn't CID unlocked as it's a g4) to reflash with to try to recover gave the error' this update is too old for this device' etc as it was the launch rom.
Thanks, I'll post if the device recovers!
M.S
Sorted, thanks, has booted up fine with the update rom.
Thankyou.
M.S
Thanks !
Grrrrr8 you got it working
Related
hi,
i have just downloaded the radio stack from O2 v4.21. I have tried to upgrade through active sync 3.71 it upgraded ok, but when i went to restart the XDA it gets stuck on the boot screen. the one that says test not for resale... and at the bottom right hand corner its says A.30.07 and then locks up.
normally before i tried to upgrade it said A.30.07 the underneath it said 4.20...
anybody know what i need to do to correct it?? i have looked through loads of forum posts and now i'am really confused???
Thanks alot
Zetex :?:
a bit of further info my Bootloader on my xda1 is 5.22
I'am also willing to pay for help i recieve to get my xda up and running again, because without it i really i'am stuck. I don't just use it as i gadget i use for everyday work/pleasure...
Thanks alot
Zetex
can anybody help me????
Hi,
No experts or semi-experts seem to be offering any help. I consider myself a fairly experienced novice so I am not sure how useful (or safe) my advice is. Take care! But here are my observations..........
You say the upgrade went OK? Does this mean you got as far as the message Flash Complete! Press OK to restart your device?
If so, this is encouraging as most of the problems I've located on this forum stopped part way through the upgrade (many at 1%).
Did you follow the instructions accompanying the upgrade to the letter? (ie. kill all running programs, switch off phone etc.)
The 4.21 upgrade is for the PW10A1 model not the PW10B1 (check the back of your xda's case to find out). Not sure how you deal with this one if yours is a PW10B1.
Can you enter bootloader mode? (soft reset with the stylus while holding the power button). If so, this is also good news. Someone with more experience than me could probably tell you what to do next. (Possibly flash a new ROM using the SD card method. Although you upgraded the Radio Stack it may have corrupted or upset your Radio Unit/'ROM'. If you decide to do this, I suggest something based on the v3.17 such as the XDA developers special edition ROM ..... you can always upgrade to WM2003 again later.).
Good Luck!
[/b][/u]
cranny,
Thanks alot for the reply m8, I did try what you have suggested by reloading the 3.17 o2 rom via sd card and now it won't even switch on anymore.
not to worry its gone off to the xda repaire center in Norwich today for repair under warranty.
Thanks for the reply anyway m8
Zetex
good day,
that I always try to make an update in the 9100 it stops to the 98%, restarts in the screen of tres colors.
I have IPL/SPL 1.xx
help !!!!!
gildp said:
good day,
that I always try to make an update in the 9100 it stops to the 98%, restarts in the screen of tres colors.
I have IPL/SPL 1.xx
help !!!!!
Click to expand...
Click to collapse
What rom are you trying to put on? If you have the problem i think you have, i would not go around asking everyone cus you will get smoked! As its on here like a million times!
First off take your storage card out.. .. send off, flash back to original carrier rom... leave storage card out and flash again..
....
CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
where can i find th original t-mobile 1.08 rom for the mda....
i cant seem to find it nowhere....
i had the same problem wen i was upgradin to wm6
I guess it does offend the moderators because I just posted the same question after searching and searching for weeks on resolution on this issue. They toasted my thread, probably this one too and I hope they don't because after reading 100+ posts on this topic, there was no resolution. Of course I tried without the SD card. I tried the 1.05 ROM as well as xenin's T-Mobile 2.26 ROM with built in CID unlock and both froze at 98%. By the way is your QTEK 9100 from the factory because mine is and I think this is the common denominator in this problem. Please someone help cause I'm probably new to this forum (not to howardforums) but I know my phone stuff so this is a real issue! Thanks in advance and pls do not delete this thread. Thanks.
sunycheeba416 said:
... T-Mobile 2.26 ROM with built in CID unlock ...
Click to expand...
Click to collapse
You better start re-reading the 100+ posts!
First of all your WIZ needs to be CID unlocked - a 'build-in' CID unlock in a ROM you're trying to flash will not help!
I understand that. That was my second way of trying to resolve it. I originally followed the "The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards" post and followed it word for word (and read all 36 pages). I tried flashing buttons 1.05 ROM (http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html) and got the 98%. The second time I thought I'd give it a shot and tried xenin's T-Mobile ROM with built-in CID and it froze at 98% too! My suspicion is that there is something different about factory phone than SP branded phones. Anyone else?
I also rebooted my PC and phone. Deleted all my session temp files. Tried 3 different computers. Tried without SD card. Everytime I it froze at 98% and had to revert back to the original QTEK 9100 ROM (2.17). And just for kicks I tried installing T-Mobile's original 2.26 ROM and it gave me a "vendor match" error, meaning it's still CID locked.
Umm, if you bought it straight from HTC/Qtek, wouldn't it already be unlocked? From your last post, it seems you do not have a branded or locked phone...
It is SIM unlocked which means I can use an SIM card. BUT it is not CID unlocked meaning that I can't flash the ROM to another maker's ROM (like QTEK to T-Mobile or QTEK to Cingular or QTEK to Custom ROM).
I wsa thinking that HTC and QTEK have tight bonds and was wondering if I can make the jump to an HTC ROM and CID unlock it from there. Not sure if that makes a difference. Kinda stuck
gildp said:
good day,
that I always try to make an update in the 9100 it stops to the 98%, restarts in the screen of tres colors.
I have IPL/SPL 1.xx
help !!!!!
Click to expand...
Click to collapse
You must flash a FULL carrier 2.xx rom before flashing any custom rom from this site (other than the ones used for CID unlocking)
You will have issues if you skip step 17 of the Definitive guide to Unlocking and Upgrading G3 Wizards (Sticky in this forum).
I need help guys, I've tried searching but i cant find the solution, I have run uspl a few weeks ago and have been experimenting with some different roms and yesterday I installed a new rom, WM6_WWE 3.7+ RADIO 2.94.90+BigStorage (found here http://forum.xda-developers.com/showthread.php?t=318835&highlight=big+storage) and now cannot re flash my device. It does enter bootloader then the progress bar goes to 3% and I get the message ERROR [270] UPDATE ERROR
This has never happened to me before. Can anyone help?
Many thanks
guerilladev said:
I need help guys, I've tried searching but i cant find the solution, I have run uspl a few weeks ago and have been experimenting with some different roms and yesterday I installed a new rom, WM6_WWE 3.7+ RADIO 2.94.90+BigStorage (found here http://forum.xda-developers.com/showthread.php?t=318835&highlight=big+storage) and now cannot re flash my device. It does enter bootloader then the progress bar goes to 3% and I get the message ERROR [270] UPDATE ERROR
This has never happened to me before. Can anyone help?
Many thanks
Click to expand...
Click to collapse
Re-flash USPL and try again.
Panic over, thanks very much Shand359!! Its working just fine now. I guess the SPL was too high eh? I did try to reflash with uspl at first but it seems the copy that I had on my pc was corrupt, i downloaded it and its flashing a new B&B3.7 right now. Thanks again!
Glad you got it going.
XDA ORBIT
Hi guys,
I have trouble with my orbit.
It is german and i want to change it to English,
i suppose i have to flash it before using the new english rom..
I do not know anything about this things..
Please help. Thank you...
02AN
Check out this thread below...
This will unlock your orbit, then you can install any rom....
Sure the english rom is on here somewhere
http://forum.xda-developers.com/showthread.php?t=311403
G
baboon99 said:
02AN
Check out this thread below...
This will unlock your orbit, then you can install any rom....
Sure the english rom is on here somewhere
http://forum.xda-developers.com/showthread.php?t=311403
G
Click to expand...
Click to collapse
First of all, thanks..
I did, and it said updated. I thought it is done..
And i will try to load english rom..
But i scared to do this action because i do not wanna lose my device.
I suppose i have to use it on german language...
Mods, Developers, Seniors...
Anyone know how to get around with the Error 300 Invalid update Tool, problem?????
I think we can donate(maybe pay will be appropriate in this case ) to the developers who bring out a fix for it.
My Device gets only into the bootloader mode. When flashing the original ROM from DOPOD SEA WM6 WWE SHIP, it gets to the progress screen and @ 0% the RUU gives the Error 300.
Tried the SD Card flash method also, no luck!
I beleive the CID area is corrupt!!!
I had downloaded a tool to change the splash screen image, didn't used it, but by mistake the EnterBootLoader.exe (SPLJump) got executed and screwed the device
Been through the forum, but no help at all
Any takers?
nauman said:
Mods, Developers, Seniors...
Anyone know how to get around with the Error 300 Invalid update Tool, problem?????
I think we can donate(maybe pay will be appropriate in this case ) to the developers who bring out a fix for it.
My Device gets only into the bootloader mode. When flashing the original ROM from DOPOD SEA WM6 WWE SHIP, it gets to the progress screen and @ 0% the RUU gives the Error 300.
Tried the SD Card flash method also, no luck!
I beleive the CID area is corrupt!!!
I had downloaded a tool to change the splash screen image, didn't used it, but by mistake the EnterBootLoader.exe (SPLJump) got executed and screwed the device
Been through the forum, but no help at all
Any takers?
Click to expand...
Click to collapse
it may be original rom,but does it have correct cid
1.you can get right rom by registration at manufacturers site
2.you can download one from wiki or forum,but in this case you will have to cid unlock your device,you have to download artemis uspl from artemis upgrading thread and than flash any rom you want,just be carefull to flash a rom that is for artemis,because flashing any other rom will brick your device
3.uspl the device and flash the rom you mentioned
farukb said:
it may be original rom,but does it have correct cid
1.you can get right rom by registration at manufacturers site
2.you can download one from wiki or forum,but in this case you will have to cid unlock your device,you have to download artemis uspl from artemis upgrading thread and than flash any rom you want,just be carefull to flash a rom that is for artemis,because flashing any other rom will brick your device
3.uspl the device and flash the rom you mentioned
Click to expand...
Click to collapse
I have the original ship ROM "P800w_SEA_ENG_WM6_Upgrade_20070713", even that fails with the same error message.
My device is already unlocked using the artemis uspl and I have used several ROMs earlier!!!!
anyone with this fix? I am getting the same error on my friends artemis. No help hitherto solved the problem. I wish if someone could really get on to it & get me the solution.
corepda said:
anyone with this fix? I am getting the same error on my friends artemis. No help hitherto solved the problem. I wish if someone could really get on to it & get me the solution.
Click to expand...
Click to collapse
I sent my device to HTC service center and go it resolved. That is the only thing which worked for me after a couple of weeks searching in the forums and no solution. But the HTC SC buggers replaced my device entirely and gave me back an old **** device . So also keep this in mind. you won't be sure, if you get your original device back after the so called repair. HTC SC in India is super *****y, had a bitter experience!
Now I have moved to TD2, know that I was at loss, but am happy to have a shiny new TD2
Service Centre at Mumbai Sucks Big Tym....
HTC service centre at mumbai sucks big time....
they said they can't replair my cell n it has a HARDWARE ISSUE!!!
stupid lasses....
What can we do here getting the same error....
Tried MMC method, nothing!
HOW CAN THERE BE NO SOLUTION TO THIS PROBLEM??????????
no have solution this problem ???
stupid ! CID area !!! STUPID HTC ---
Ouch - after trying to SSPL my phone, it doesn't boot anymore. It's a T-Mobile branded Leo which doesnt allow to flash original HTC ROMs.
Now I need to try a T-Mob version. Anybody Can provide one ?
Thanks !
have you tried downloading an official rom from HTC with your phone's serial number?
http://www.htc.com/europe/SupportDownload.aspx?p_id=297&cat=2&dl_id=804
Thanks for the tip, but: Sorry, this software download is not suitable for your device.
Anyone who has a T-Mob ROM from somewhere ?
Thanks!
try a gold card solution...i also got a t-mobile hd2 i sued gold card to upto 1.6 rom...its working good...
Hello Matmax,
I had the same Problem, but you can try a Hardreset.
Turn your LEO off ( Battery out and in)
Press Volume up and down together
and turn HD2 on.
I had to try several times.
There is no official T-Mobile ROM to download.
New T-Mobile ROM comes out next week in Germany (They said)
http://www.t-mobile.de/meinhandy/1,14091,19349-_,00.html
Regads
Hammermade
http://rapidshare.com/files/3253914...dio_Signed_15.26.50.07U_2.04.50.22_2_Ship.exe
UK T-Mobile rom I saw posted last week.
So, flashing roms using sspl does not work with this type of t mobile branded leo?
For me it seems so :-(
I tried several hard resets, doesn't help. Thnanks also for the UK stock ROM, but that gives me another INVALID VENDER ID
Matmax said:
For me it seems so :-(
I tried several hard resets, doesn't help. Thnanks also for the UK stock ROM, but that gives me another INVALID VENDER ID
Click to expand...
Click to collapse
i think u must post ur problem in sticked Bepe thread, may he has the help.
Auch!! I am also searching for a suitable T mobile rom (UK) for my leo, but could't find any, yet...
P.S.:I planned to flash another rom using new sspl, but after reading your post I think I will wait a bit more... (If someone would not give a different feedback...)
I think your best bet is to go for the GoldCard method, although it would be nice if someone could host the T-Mobile rom on a site other than rapidshare.
GC method worked on my UK T-Mobile HD2...
0Reefa said:
I think your best bet is to go for the GoldCard method, although it would be nice if someone could host the T-Mobile rom on a site other than rapidshare.
GC method worked on my UK T-Mobile HD2...
Click to expand...
Click to collapse
Thanks for the tipp, but with a dead phone, Goldcard doesn'T help much
Matmax said:
Thanks for the tipp, but with a dead phone, Goldcard doesn'T help much
Click to expand...
Click to collapse
Post in the Bepe thread or PM him for help. Either way it would be useful for all of us to understand from him and you what went wrong and to fix it so other people don't have the same problem.
WB
Can you get to the boot loader screen? Pressing down on vol and powering on...?
0Reefa said:
Can you get to the boot loader screen? Pressing down on vol and powering on...?
Click to expand...
Click to collapse
Yes - but don't have a ROM I can flash (T-Mobile Germany).
Hard reset - works fine
Boot loader - works fine
Boot - stops after the versions of radio etc. is shown (red numbers on black screen)
Cavallipurosangue said:
Auch!! I am also searching for a suitable T mobile rom (UK) for my leo, but could't find any, yet...
P.S.:I planned to flash another rom using new sspl, but after reading your post I think I will wait a bit more... (If someone would not give a different feedback...)
Click to expand...
Click to collapse
I have T-mobile HD2 and sspl works fine. I am on my 3rd rom now.
T-MOBILE USA
http://www.actualitemobile.com/forum/index.php/topic,13335.msg214232.html#msg214232
Matmax said:
Yes - but don't have a ROM I can flash (T-Mobile Germany).
Hard reset - works fine
Boot loader - works fine
Boot - stops after the versions of radio etc. is shown (red numbers on black screen)
Click to expand...
Click to collapse
Hi
Re try Using SSPL and the custom rom it will flash from boot loader.
I had the problem first time using SSPL it crashes and stayed at bootloader. Every time fails You disconnect the cable and reconnect, Then re tried several time running SSPL with IT2 rom and 3rd or fourth attempt it worked. If not UK 1.48 version will work on T mobile uk.
Good luck
T-Mobile UK ROM
Hi try downloading this one from my 4Shared account. I don't think that it's the fastest link but it may help you out of a hole....
http://www.4shared.com/file/183376263/fc9b664b/RUU_Leo_TMO_UK_1431102_Radio_S.html
I too have a T-Mobile HD2 and was about to flash the new Miri ROM until I saw your post. Now a tad nervous about doing so......
Mat, before you tried to SSPL flash your Leo did you have a stock T-Mob rom or had you already GoldCarded to a new release rom?