Database Users

WM 2005 & ActiveSync 4.0- Solution

Somebody has trouble with WM 2005, ActiveSync 4.0 (in PC) is working not stable or hanging all the time and me too- Magneto with WinXP SP2, office 2003 SP1.
In my experience some solution can be improved as following:
1. ActiveSync via IR - very sample but too slow
2. ActiveSync via Bluetooth - sample and fast
3. ActiveSync via USB, we need to do some steps
+ Turn off firewall of OS windows
+ Open network cards on your Himalaya:: Settings/ Connections/ Network cards
+ Click "Remote NDIS host" and you can see: Marked " Use specific IP addres"
+ Click " Use server-assigned IP address"
+ Click OK
+ Connect your device to PC, ActiveSync must be working at least in my case

,,,,
i tried these but it didn'nt work plz try to help its now 20 days of serching for a solution for active sync 4 proplem with usb

,,,,
i tried these but it didn'nt work plz try to help its now 20 days of serching for a solution for active sync 4 proplem with usb

??
@ xpirate
You can try remove activesync 4.0 and reinstall again, reset PC, turn off firewall and reconnect.

the problem i have is with outlook and activesync. whenever i try and use activesync, it pops up with some dialog about outlook not being configured correctly. which is true, seeing as I DONT USE OUTLOOK FOR ANYTHING! so why is this happening? it's not even set to sync email as i dont use outlook!

deadparrot said:
the problem i have is with outlook and activesync. whenever i try and use activesync, it pops up with some dialog about outlook not being configured correctly. which is true, seeing as I DONT USE OUTLOOK FOR ANYTHING! so why is this happening? it's not even set to sync email as i dont use outlook!
Click to expand...
Click to collapse
I noticed the same problem with AS 4 - it would only synchronise Favourites and Files.
Read the error messages carefully and you will find one telling you to use the 'Detect & repair' option on Outlook. I did so and it synced properly.
It was when I went back to Outlook Express that I realised that my OE wasnt the default email client anymore - Outlook had taken over that function. I made OE the default client again and AS stopped synchronising - went back to the same old error.
From the above I can only conclude that AS4 will only synchronise with Outlook and not any other PIM programmes. It also requires Outlook to be your default email client if you want to sync - slimy lil microsoft trick.
If you have a firewall, you will also notice that ActiveSync tries to send out email messages - this is both annoying and scary. Who are these messages intended for - Microsoft? I have blocked AS4 from sending emails on my firewall, but I still have to do a 'detect and repair' which sets Outlook as the default email client everytime I want to sync...

Problemas with the activesync
I don´t know what happen with the activesync and w2005. I cannot synconize because a hardware happen in the device manager.
The error is in the device manager-network adapters- windows mobile-base.
thanks for the help.
Txemuki

Re: Problemas with the activesync
belaten said:
I don´t know what happen with the activesync and w2005. I cannot synconize because a hardware happen in the device manager.
The error is in the device manager-network adapters- windows mobile-base.
Click to expand...
Click to collapse
I got the same problem with my Win2003Server box.
If you are running XP then you need to apply Service Pack 2
If you are running 2003 then you need to apply Service Pack 1
Seems that these packs have files "netrndis.inf" and "Usb_Rndis.ndi" that fix our problem
If you will find these files could you pls send them here? I dont' have SP1 installed and cant find these anywhere ((

I can confirm this.
On my office notebook I don't have SP2 on XP and Activesync does not work via USB (Bluetooth works).
On my home PC I have SP2 on XP and Activesync works via USB.
I guess I have to try to get these files somehow.
Patric
Update: OK, I got netrndis, but I don't have usb_rndis...

Hi Patric,
Thanx for the file!!!
Can you also post: rndismpx.sys AND usb8023x.sys ?
So, hope we will find a solution for non-SPed WinXPs and maybe for non-SPed Win2003
Thx!

OK, the files are attached. Does this help? I'm still missing the USB_rndis.ndi file.
Cheers Patric

Hi Patric,
pschoch said:
OK, the files are attached. Does this help? I'm still missing the USB_rndis.ndi file.
Click to expand...
Click to collapse
Thank you very much for the files! No need for the "usb_rndis.ndi"
It seems to be working on XP but not on my w2k3 box :-(((
Here what to do with files on XP:
1) Open "Drivers" subfolder in your ActiveSync folder (i.e., c:\program files\microsoft activesync\drivers)
2) Copy all three files there: netrndis.inf, rndismpx.sys & usb8023x.sys
3) Put your I-Mate to the cradle
4) When device installation wizard will ask you to proceed with Automatic or Manual installation you need to Choose "Manual". Then open your activesync's Drivers folder. Choose "Windows Mobile-based device" and wait until installation is finishes...
Good Luck!

hi there..
i have installed longhorn winhec build 5048 (the newest), office xp, activesync 4 and connected my mda2 (with wm2k5) to pc
i can see it in network controlers and activesync connects to mda2
but when i sync, i get an error message
i don't connect to exchange server, i just want to synchronize mda2 with outlook
the error is on the screenshot
thanks for help

johnz said:
i have installed longhorn winhec build 5048 (the newest), office xp, activesync 4 and connected my mda2 (with wm2k5) to pc
i can see it in network controlers and activesync connects to mda2
but when i sync, i get an error message
i don't connect to exchange server, i just want to synchronize mda2 with outlook
the error is on the screenshot
Click to expand...
Click to collapse
Have no exact idea cause didn't have such, but try to:
1) Disable ALL possible firewalls
2) Make sure your current ActiveSync Partnership is not "Microsoft Exchange" and if it is, just delete current partnership and create a new one
3) Remove "Email" from your sync list?!
4) Remove "Favorites" from your sync list?!

thx..
but..I have no firewall turned on (i had only microsoft firewall, it's off)
I have never connected to an exchange server, my partnership in activesync is only with my pc.
I have reinstalled activesync, not useful
removing items could help.. i'll give it a try
i'm going to sleep for now, thanks..
I *think* longhorn is very nice, but i'll stay with xp

I copied everything and did the procedure... now I get the error message 'Device can not start (10)'...
Not successful yet...
Patric

can instal 2005 on my xda2
hey i downloaded the win2005 and active sync 4 but when iam flashing ma rom and instaling the file an error says that cannot connect or smthn or an error in connection why is that ?

any progress
Same error Pschosch
No Progress what so ever!!

ActiveSycn 4.0 Works after all!!!
I fixed my ActiveSync USB problem...
I downloaded ActiveSync 4.0 from Microsoft's web site and instlaled over current AS4.0.
When I placed my MDA2 on the cradle, the same problem persisted, so with the PDA still in the cradle I unplugged the USB connector and then connected it again but to another port. Now the system detected a "new" device and installed properly this time so now it works 100%.
I hope this procedure helps you too!
By the way, I'm on Win XP (no SP2) and USB 1.1
Best regards,
Rayan

Does the activesync 4 can sync WM2003SE? cuz i got problem saying that version incompatible..

O2 XDA Mini S, Active Sync 4.1/4.2 Problem

Hi, I am looking for some help regarding a sync problem I am having with my XDA Mini S. I have recently re-installed my copy of Windows XP Home. Prior to this re-install I was able to sycn with my XDA using activesync 4.1. Since the re-install however when trying to sync I am presented with an error on the desktop machine.
Support Code:86000107
I have trawled the internet to find a solution, but to no avail. I have tried the new 4.2 beta of active sync and tried un-installing the software several times aswell as removing sync profiles form the unit.
Any help would be apreciated. I am using ROM version 2.21.4.1 WWE and Windows Mobile Version 5.0 (Build 14847.2.0.0)
Thanks

See my responses in a similar thread posted by someone else...
http://forum.xda-developers.com/viewtopic.php?p=289256

Thanks for the reply! I had tried searching the forum first, but my choice of keywords obviously let me down.
I have tried both disabling the firewall and ensuring DHCP is enabled. I am using the windows firewall controlled by Microsoft's Windows OncCare Live, and within which all processes associated with active sync have been granted permission to access the network.
The phone appears to be able to send data to the desktop pc, but the desktop fails for some reason. Any further advice?
thanks

Do you hear the usual "bing bong" type noise that Windows makes when a USB device is plugged in?
Does ActiveSync on the desktop even start up?
If so, on your PC goto Start -> Control Panel -> Network Connections. When you plug the PDA in, does a new connection profile eventually show up in the Network Connections window? It will be called something like Local Connection #6 or something similar, I've renamed mine.

Yes everything connects and establishes a connection. I can browse the device and even upload to and from it. Active sync even tries to sync with the device, but then shows the error detailed above. The XDA was able to upload my contacts to outlook for example after the re-install of windows, but nothing is synced from the desktop pc to the xda.

bump

See the Microsoft Knowledge base..........
............there's something I remember when I had this prob.
For me, it was ZoneAlarm firewall [free edition] which doesn't allow individual ports to be configured, just application rules [you can in Pro version] but in my research, I remember seeing something about Activesync not working even though the exception was set in Windows Firewall.
Try with NO firewall at all - probably best to pull your network cable if you're worried whilst you test ActiveSync with no firewall at all.
I'm sorry I can't post the reference but you should be able to find it again.
I now don't use any s/w firewall - I have a switch router with hardware router built in which shows as 'stealthed' to the outside world on all ports @ www.grc.com [ShieldsUp] and all my WM5 stuff works - ActiveSync and WiFi
I didn't get the error you did, mine just connected then hung whilst showing 'Syncronising'............'cept it never did !!! LOL but I could do all the other things as you describe....just no syncing.

Thanks for the reply. I have already tried without a firewall enabled at all but with no luck. I am trying to work out what is different with this installation tot he previous that worked.

I have found that I need to dissable the Sync of my contacts and it works with the Caldener etc. I have no idea why this is, but its the only solution I can find anywhere and its very frustrating. :roll:

That's a weird one, not be able to sync contacts but can do calendar events.
Have you tried a reinstall of outlook?
If so then, and this is just a guess, it could be that there is something wrong with a particular contact entry that's causing things to go wrong. Perhaps some invalid characters in any one of the many available fields (name, num, email address, website, notes etc).

Some solutions that worked for me
I had the problem with contacts not syncing when everything else would. My solution, which worked for me, was to:
1. disable 'contacts' in ActivSync options
2. sync as normal
3. disconnect device, reconnect device, sync again
4. re-enable 'contacts' in ActivSync options
5. contacts should now re-sync
Incidentally I found many problems with the ActiveSync partnership after restoring the device from a backup. The solution is to delete everything in the \Windows\ActiveSync folder on the pocket PC, go into ActiveSync options on the pocket pc and remove the partnership there. Finally delete the partnership on your PC.
I am running V-Com systemsuite on my PC (which I think uses the Sygate firewall) this firewall never interferes with my XDA Exec but oddly enough does so with my XDA mini S. If I disable the firewall - problem still exists. If I shut down the firewall completely (keeping Windows XP firewall running for security) the problem goes away.
Maybe some of this will help
Cameron
Norwich, England

I had moved the Outlook.pst file to a location other than the default. When I moved it back and created a new profile the error had gone. thanks for the help everyone.

Sounds like it was a corrupt pst file causing the problem then. I'm glad you got it all working now

Re: Some solutions that worked for me
apprentice said:
I had the problem with contacts not syncing when everything else would. My solution, which worked for me, was to:
1. disable 'contacts' in ActivSync options
2. sync as normal
3. disconnect device, reconnect device, sync again
4. re-enable 'contacts' in ActivSync options
5. contacts should now re-sync
Incidentally I found many problems with the ActiveSync partnership after restoring the device from a backup. The solution is to delete everything in the \Windows\ActiveSync folder on the pocket PC, go into ActiveSync options on the pocket pc and remove the partnership there. Finally delete the partnership on your PC.
I am running V-Com systemsuite on my PC (which I think uses the Sygate firewall) this firewall never interferes with my XDA Exec but oddly enough does so with my XDA mini S. If I disable the firewall - problem still exists. If I shut down the firewall completely (keeping Windows XP firewall running for security) the problem goes away.
Maybe some of this will help
Cameron
Norwich, England
Click to expand...
Click to collapse
First of all you have to open some ports in the sygate firewall: http://www.microsoft.com/windowsmobile/help/activesync/sygate.mspx
In my experience it's necessary to change the RNDIS driver settings in the mobile phones registry as well!
Use a regedit tool like PHM Registry Editor.
Here are the settings to be added (or to be changed respectively):
Key: HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers\RNDIS
Name of the Value to add: MTU
Type : DWORD
Data: 1514 (Value is Decimal)
Name of Value to add: MaxOutTransfer
Type: DWORD
Data: 1642 (Value is Decimal)
After a reset my Prophet (XDA Neo) synchronized well with active sygate firewall!

Browsing device without activsync?

Is it possible to browse the device through USB without installing activsync?

You can download a small program called wm5torage. This enables you to connect your laptop to a pc as if it were a mass storage device. You can only browse whats on the memory card though, not system files.
If you want to browse through system files then Activesync is the only way i know of doing this. There may be a third party app somewhere, but you'd still have to install it so there's probably not much point..

I tried wm5torage some time ago (v1.6) and didn't work with my TyTN... it worked with my friend's wizard. Don't know if there's any newer version which works.... did you get it working on the Hermes?

Dont take time to try wm5torage on Hermes. I asked Seems there is no way to get it work.
http://www.modaco.com/index.php?showtopic=238545&st=400

ver 1.71 has been posted in this thread http://www.modaco.com/index.php?showtopic=238545&hl=wmstorage but the download page says the file is broken.

I run an FTP server on my TyTN. That way you can access and manage all files on your device via Activesync or a Wireless connection.
This one is basic, but free and does the job well:
http://www.freefloat.com/index.php?...=http://www.freefloat.com/p9614/p9614_swe.php
Make the FTP server point at the root of your device for full access to all files and folders.

i tried the ftp server, but it seems to be super slow to transfer files. I think it's faster using active sync to browse.

See here.
http://forum.xda-developers.com/viewtopic.php?t=62411
WM5storage doesn't work for me.

it should work when you disable advanced network functionality in: connections - USB to PC...
but when I disable that I get an error:
failed to disable RNDIS to use serial
even when I disable active sync to use USB when cradled.
any ideas?

new actie sync
My active sync does not sync my contacts. I have been told to download a new active sync. Does anyone know where I can get this from?
thanks
Scot

scotdevlin said:
My active sync does not sync my contacts. I have been told to download a new active sync. Does anyone know where I can get this from?
thanks
Scot
Click to expand...
Click to collapse
http://www.microsoft.com/windowsmobile/activesync/default.mspx
Mike

scotdevlin said:
My active sync does not sync my contacts. I have been told to download a new active sync. Does anyone know where I can get this from?
thanks
Scot
Click to expand...
Click to collapse
You may try the developers website...let's see...what were they called again. Oh yeah, Microsoft.

thanks! realise its a dumb q

nvm, half asleep

Anyone have any ideas if any PC i hook my phone up to says "USB Device Not Recognized." I've tried 3 PCs (work, home and laptop). None of which work. Any ideas?

try this!!!!!!!!
Chris The Ninja Pirate said:
See here.
http://forum.xda-developers.com/viewtopic.php?t=62411
WM5storage doesn't work for me.
Click to expand...
Click to collapse
Ah, but have you tried this?​
Goto: Start Menu > settings > Connections > USB to PC
Now, untick the box that says: "Enable advanced network functionality"
Now try reconnecting your Hermes! ​

Tried this, found it to be the best:
http://www.softick.com/pocket-pc/cardexport2/
Works on wm5 haven't tried it on wm6 yet (will install it soon) it's not free but it's worth it to try out the demo and see for yourself.

Active Sync Can not Connect

I had win 2000 and with ASync and every thing works a ok, with desktop connection on to Jas Jar via USB.
I upgraded to win xp sp2, installedt MS ASync 4.5 - since then MS Async has never worked.
Before I installed MS Async and had the jas jar connected via USB, i get the standard windows "new hardware found", I run this wizard buy I get there error, saying cant find software device may not work correctly. So I go ok, lets install MS Async 4.5.
I do this, and I connect the Jas Jar to the desktop PC via usb, yet the MS Async cant find a connection.
Yes the cables are all connected, Zone Alarm turned off, and also the XP sp2 firewall is turned off as well.
Any ideas ????

Active Sync 4.5 changes the way it connects from USB Serial Sync Mode to RNDIS Sync Mode. This can cause problems (it does for me). There is a little Microsoft program called ActiveSync Mode which allows you to change back. I you search on the web & find "ActiveSyncMode.sa.CAB" this will install the program. You then go into programs & you will see a new Icon for ActiveSync Mode. Hope this works for you.

Active sync problems
all worked fine now
thanks for the help guys
was thinking of trading in for an Iphone as they have dropped in price to 169 quid !
anyone think this would be a bad idea ?

I'l give this a go myself.
After experimenting with my exec/universal I discovered Activesync 4.5 on my XP Desktop works with the WM6 ROM but not the WM5 one.
But Vista on my Laptop will sync with Windows Mobile 5
I'll certainly check Activesync mode out then I can go back to WM5 as the Ranju core doesnt have msn otherwise everything works really well on it.
Where does th CAB file install to? I tried it on my XDAmini-s/Vario and it still doesnt sync with Activesync4.5

Hello JohnWB
It works for me too !!!!!!
Thank you very much indeed
Louis

JohnWB said:
Active Sync 4.5 changes the way it connects from USB Serial Sync Mode to RNDIS Sync Mode. This can cause problems (it does for me). There is a little Microsoft program called ActiveSync Mode which allows you to change back. I you search on the web & find "ActiveSyncMode.sa.CAB" this will install the program. You then go into programs & you will see a new Icon for ActiveSync Mode. Hope this works for you.
Click to expand...
Click to collapse
thanks a bunch, works fine after your advise, only had to install activesync 4.5 after installing activesync.mod to my mda
thanks again

What is needed to be able to sync?

Hi all, i hope this is the right forum.
I have problems with ActiveSync... i dont get it, i have a HTC Touch Cruise with Windows Mobile 6, ActiveSync 4.5, Outlook 2007. Windows XP Pro (SP2) and the HTC connect, but the only thing I'm able to do is to browse the file system on the HTC, i cannot sync. The sync-action in the menus are disabled and cannot even be selected/pressed on either of the machine. Still they are connected, and i can, as i said, browse the HTC:s file system without any problems.
I have read something about "partnership" between Windows and the telephone on several forums on internet, but i have never been given the opportunity to set anything like "partnership", and following the guides to do so does not work. Also, ActiveSync says i'm connected as "Guest".
I have performed uninstall of ActiveSync and cold start on the computer along with reset of the HTC several times. I have also tried to perform the above procedure with the Anti-virus/Firewall software (F-Secure) deactivated all network traffic allowed. Still no luck.
What have i missed to be able to sync?
Regards
Margot

I gave up, installed Funambol instead, it's benefits over ActiveSync is that it actually works.

i posted a comment to this last night, but for some reason,it hasn't shown up!
basically if you right click on the active sync icon ,you can create a partnership.
But what i would do is unnstall active sync then restart the pc , then reinstall it from the download link i have provided at the bottom of this text.
Make sure also that you disconnect your phone from the pc and click start > programs > active sync
then click menu > options. If you have no partnerships in the phone then you need to do nothing. If you have partnerships then that is probably why you cannot create a new one as you can only have two partnerships on the phone.
before deleteing the partnerships ensure that you have backed up all your contacts etc in your phone as deleting any partnerships will also delete the info it is syncing to the pc i.e. contacts,appointments,tasks etc.
I would also click menu > connections and make sure that syncronise all pc's using this connection is ticked and that 'USB is displayed in the box underneath, then when that is done ,click ok.
use ppcpimbackup on your phone(not the pc) to back up all the important info so that you can restore it if anything goes wrong. Just unzip the following file then copy it to your storage card and use file explorer to open it.
http://rapidshare.com/files/85563377/ppcpimbackup_v2.8.rar
download the latest version of active sync here
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/activesync45.mspx

delete this post

scousemartin said:
basically if you right click on the active sync icon ,you can create a partnership.
Click to expand...
Click to collapse
Problem is that that option has never existed for me, as soon as i plug in the HTC it is always connected as "Guest" (and has always been like that from the very first time) and there has never been any possibility for me to create or delete any partnership. When i right click on the ActiveSync icon only three (3) options are available, these are "Open Microsoft ActiveSync", "Connection Settings..." and "Explore", all other options are greyed out. And option to create partnership does not exist at all, neither selectable or greyed out.
Also, i do have the correct version (4.5) of ActiveSync, i did even try the English version instead of the Swedish to rule out any impossible "possibilities" for the reason of my problems with ActiveSync.
I have written further on the subject (what procedures i have gone through in my desperate quest to get a partnership between my PC and the HTC) on this link.
scousemartin said:
if you are using Funambol ,does that mean you are using a mac?
Click to expand...
Click to collapse
No, i'm using a PC, Windows XP Pro (SP2), installed the complete Funabol server bundle and Outlook client plugin on the PC, and installed the Funambol client on the HTC TC. Set up the Server to my needs and everything that did not work with ActiveSync, now works with Funambol -- and all my base are now belong to me.

did you try the settings on the phone to see if you have the sync partnerships setup already? also did you check the sync connections were set to allow all pc connections to usb? I know you have it sorted out now , but just curious with what the problem is, especially as you can connect as a guest. Is there any other software on the phone that is stopping the active sync connection. Or is the firewall on the pc blocking it?
I have just read the forum link you posted.
The reason most of the options are faded out when you try to select them on the pc and ppc is that you have the device connected when you try you need to unplug the device and then the partnership options will be enabled.
P.S. I love sweden, i worked over there for 8 months and Norway. Mainly in the north of sweden. Your beer is too expensive though

scousemartin said:
did you try the settings on the phone to see if you have the sync partnerships setup already?
Click to expand...
Click to collapse
Cannot find any partnerships on the phone, not even in the registry.
scousemartin said:
also did you check the sync connections were set to allow all pc connections to usb?
Click to expand...
Click to collapse
This i have done. I can only do it when i'm disconnected, but i'm guessing that is normal.
scousemartin said:
I know you have it sorted out now , but just curious with what the problem is, especially as you can connect as a guest. Is there any other software on the phone that is stopping the active sync connection. Or is the firewall on the pc blocking it?
Click to expand...
Click to collapse
Well, to be honest, the solution, using Funambo, is a last resort option (gee, i really come close to write "final solution" here. ), and i would still prefer to get it to work with ActiveSync. With Funambo, since i want to have full control over where the information goes, i have to run a pretty heavy server on my computer, and it does feels a bit overkill for just syncing Outlook with a PDA.
Anyway, i have tried to disable the firewall and Anti Virus software (F-Secure bundle) and allow all traffic, uninstalled AS, removed the AS aplication drawer, reboot, installed AS, soft reset my HTC, and connect it. It feels like i have tried everything. I even tried to do the complete reinstall process with my network cable to the FiberLAN disconnected to exclude the possibility of failure because of some security restriction reasons in AS, since i have WAN (internet) straight into my computer without a modem, switch, router or anything else in between (part from 127.0.0.1 i do not even have a local IP address, only a public WAN IP).
scousemartin said:
I have just read the forum link you posted.
The reason most of the options are faded out when you try to select them on the pc and ppc is that you have the device connected when you try you need to unplug the device and then the partnership options will be enabled.
Click to expand...
Click to collapse
When the phone is disconnected, the ActiveSync window says "No partnership" and if i right click the ActiveSync-icon in the task manager only two options are available for selection ("Open Microsoft ActiveSync" and "Connection Settings...").
So, neither the PC or the phone has any partnership, still, when i connect them it immediately connects as guest and leave me no option to set up any partnership (neither disconnected or connected). Something is fishy.
scousemartin said:
P.S. I love sweden, i worked over there for 8 months and Norway. Mainly in the north of sweden. Your beer is too expensive though
Click to expand...
Click to collapse
*lol* Thanks! I'm no patriot or nationalist so i cannot take pride in being swedish, but i do appreciate our nature and so on... Indeed beer is expensive here, very expensive... But prize must also be put in perspective as it's a part of our still pretty successful national alcohol and drugs policy. It's a small price to pay for the sake of decent public health, and even with our high alcohol and tobacco taxes, the tax incomes from these products does not even close to cover the costs for the damage they indirectly cause.
Also, as i'm a "far left extremist", high taxes is a kind of a turn-on for me.