Database Users

Unable to Syn with PC after upgrade ausdim's Rom!

Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.

vincent85 said:
Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.
Click to expand...
Click to collapse
relax man!go to settings-connections-usb to pc and NO enable advanced network functionality

vincent85 said:
Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.
Click to expand...
Click to collapse
TRY FIRST S_WIND...
Don't worry ! Rom and device are ok!
Have you tried to make an Hard reset? If you don't , try now and let us know.

I tried both ways you mentioned (hard reset, and "go to settings-connections-usb to pc and NO enable advanced network functionality")
When i plug the usb cable in, there is nothing happen However there is yellow light indicate that the device is charging.....

vincent85 said:
I tried both ways you mentioned (hard reset, and "go to settings-connections-usb to pc and NO enable advanced network functionality")
When i plug the usb cable in, there is nothing happen However there is yellow light indicate that the device is charging.....
Click to expand...
Click to collapse
have you tried restarting your PC??

vincent85 said:
I tried both ways you mentioned (hard reset, and "go to settings-connections-usb to pc and NO enable advanced network functionality")
When i plug the usb cable in, there is nothing happen However there is yellow light indicate that the device is charging.....
Click to expand...
Click to collapse
Go to your pc...click on active sync icon with right key , go to connection settings and flag usb connection.let us know

Yes, i restarded my PC after i Re-install Activesyn 4.5....
And i did reflash (via Mini Sd card method) the device to another rom (PDAVIET) but problem is still there...
I tried to syn with my other 2 laptop as well but both of them don't make any connection....
Very frustrating...
imdantes said:
Go to your pc...click on active sync icon with right key , go to connection settings and flag usb connection.let us know
Click to expand...
Click to collapse
Done, still the same, no response...

vincent85 said:
Yes, i restarded my PC after i Re-install Activesyn 4.5....
And i did reflash (via Mini Sd card method) the device to another rom (PDAVIET) but problem is still there...
I tried to syn with my other 2 laptop as well but both of them don't make any connection....
Very frustrating...
Done, still the same, no response...
Click to expand...
Click to collapse
Probably during the update procedure some files have corrupted , please wait , i search solution...

Download this program : http://wiki.xda-developers.com/uploads/mtty.exe ,
DISABLE USB PORT FROM ACTIVESYNC, PUT DEVICE IN BOOTLOADER AND START MTTY , NO SELECT COM , AT THE END OF COM MENU , YOU FIND USB , SELECT IT AND TYPING :
task 32 ENTER
task 28 ENTER
task 2A ENTER
info 8 ENTER
task 8 ENTER
Now , remember to reable usb connection in activeSync and try synchronisation , if doesn't work , reflash the rom.
This procedures , should be erase corrupted files.
let us know.
imdantes
P.S. Format also the sd card

YOU FIND USB , SELECT IT AND TYPING :
task 32 ENTER
task 28 ENTER
task 2A ENTER
info 8 ENTER
task 8 ENTER
Click to expand...
Click to collapse
How do i type those? i pick USB and click OK, then the message showed up "USB PORT CAN NOT OPEN" !

i think the phone usb is not working. When i install WM5TORAGE and try to use the mass store option the computer don't pick the connection...
are there any change to fix this problems?

..........anyone?

your problem same as my.but i didint flash any rom .it original rom from dopod .it suddenly cant sync to my pc.
anyone know how to fix ??....pls give us a hand tq .

Cingular 8525 Sync Problem

I have an 8525 running WM6 AT&T version. It is not recognized by my PC.
It has been running fine until the Battery died 2 weeks ago. After that I can not sync. My PC does not recognize the device. The USB Cable and connection works since my portable USB hard drive works on the same connection. I have re-formatted my PC and installed Activesync 4.5. Active Sync 4.5 is the version I have been using for over 3 months. The phone has been Hard Reset. The phone works with the exception of the Sync.
Any ideas?

flash it with another rom, that isnt an official update for your device, i.e. the o2 rom update,then see if it syncs? if that works flash it back with the at&t rom. I had this problem with my hermes(mda vario II) when i flashed the at&t wm6 rom but as soon as i flashed with the o2 rom it synced fine, even with vista

Thanks for the reply. But my PC does not sync at all and I do not have access to another one at the moment so I can't flash another ROM.
It was working up to a week ago.

if u haven't already, then make sure 'enable advanced network functionality' is unchecked on device.

Happened to me too for a minute....
I d\l ActiveSync 4.5 again and reinstalled... all was good.
Try that before smashing computer...
Guess something went wrong... 4.5 worked fine then I decided to flash the radio again. Frustrated me to no end. But reinstalling AS4.5 worked for me.

Update:
I tried reinstalling ActiveSync. Did not fix the problem.
Funny thing is that the USB plug will charge the unit but I can't Sync. It won't recognize the device. Another funny thing is that the USB on the phone does not turn on. Does look like a hardware issue then?

Troubleshooting 101... I'd try a different cable first. Then a different USB port (back, front) of the PC. Then I'd try a different computer. I'd be relatively surprised if it turns out to be the phone - but... Possible, I suppose.

right click on my computer and click manage, then click on the device manager on the top left window and a list of devices will appear on the right.
If your ppc is connected unplug it, wait a few seconds then plug it back in and you will see the screen of your devices change. If you get a unknown device or device with and exclamation mark in a yellow triangle then right click on it and click remove wait for the confirmation that it has been removed then unplug the device and wait a few seconds then plug it back it again.
If all that is useless in that it doesnt even show as an unknown device then check the universal serial bus controllers section by clicking on the + to the right of it to expand the tree and check in there if there are any unknown devices and remove them.
If after all that it still fails right click on the ruu exe file and click extract to ruu_filename and extract the contents of the file to the said folder then open the folder and inside is another exe file call ruu_inside.exe right click on that and extract that the same way by right clicking on it and click extract to ruu_filename then open that folder and rename the RUU_signed.nbh to hermimg.nbh get a blank sd card format it in the device so nothing is on it then copy the hermimg.nbh to the card. Then enter bootloader by pressing top left side button top right side button and camera button at the same time as you reset with the stylus and it will update from the sd card

galaxys said:
if u haven't already, then make sure 'enable advanced network functionality' is unchecked on device.
Click to expand...
Click to collapse
I tried this, reinstalled activesync, then it FINALLY WORKED. Thanks!
My activesync has been broken for a couple of days. I am pretty OCD so I have been on a warpath to fix it.
On a positive note, I couldn't get the new ATT rom to load, so I did everything else - I now have SIM and CID unlocked phone with vp3G's rom and I am liking it very well!

i had the same problem..i just un-installed activesync 4.5 and re-installed it. Then installed the new AT&T rom (WM6). i had the schaps verison on their before but it was giving me hell and after i replaced it with the AT&T version all is well...

OMG!!! I was freaking over this. New ATT WM6 ROM installed, was a bear but got it synched to AS 4.5 at work..but could not explore. Came home, and nothing I tried would even let me sync on my home pc! Note, this PC has been syncing WM Devices for over 5 years now, I am no newb to them!
I was even getting the "USB does not recognize this device" error! WTF!!!!!!!
After uninstalling and re-installing AS many times, cleaning the registry, doing a Hard Rest to the device...all to no avail....until I searched in here:
Quote:
if u haven't already, then make sure 'enable advanced network functionality' is unchecked on device.
That fixed it!!!! Why? I have no f'ing idea. And curse ATT/MS for having it enabled!
First try and I was able to connect , synch, explore....viola!!!
You should also mentioned where to find it:
You can find that Fubar setting by going to Settings/Connections/USB to PC

help appreciated

hi, trying to synch my wizard to eith er desktop (xp) or laptop(vista). it worked with vista briefly then stopped and has never synched with xp. the phone is charging when plugged in. xp just says windows mobile based device has found errors when installing and wont install, and vista wont recognise it apart from charging. i read that i should change the usb to pc settings in the connections tab, but i have searched the entire phone and that setting is not anywhere. i have performed many soft and hard resets, but to no avail, and also tried 3 diffrent usb cables. also tried syncing with bluetooth, but same response.
can someone please shed some light on this, as its getting very inconvenient to keep having to use the mem card for everything, and i really wanna try a new rom on this blasted thing!
thanks

try uninstalling activesync on the pc. it seems that the drivers may have been corrupted. also use a program that does secure deletion like "ccleaner" if I remember the name correctly. that shoud delete all of the files and overwrite the deleted sectors on your hard drive completely; as well as make sure tha there are no registry keys left behind.
then, restart the pc and reinstall activesync. and reset the phone before connecting.
The above is worst case senario. before doing that, try this first:
delete partnership in activesync and reset the phone. restart the computer (shut down, not restart)
then when the comp boots completely and the phone boots completely; try reconnecting again.
I once had that problem with a rom I flashed. someone forgot to put the driver into it

fixed...for now?
ok first...wow, thanks for all that!!!! second.. i think i may have fixed it! i was wandering thro the forums seeing what i could find on the subject of activesync problems...50gazillion posts later...i found this page http://forum.xda-developers.com/showthread.php?t=271174&highlight=rndis
it eemed peoples were having the same probs as me. in one post was a rndis to serial cab file, so i d/ld it and installed on my fone via the mem card, plugged fone in....synched straight away!!!! and has stayed synched so far..about half an hour. i shall post tomorrow whether it will resynch after a period of being disconnecte...fingers crossed!!!

Need urgent help plz...

Hi, I tried to get answer for my problems, but none any specific
so I`m startin a new thread...btw
My JASJAR has the same problem as lots of folks around here like it shuts off at any hard work like starting the camera or charge at 60%. I came to an end that as it works ok with the charger on, then the problem must be on battery. Well I'll try that
But the another problem is PC connectivity...it doesn't recognize the device
I tried MS Active Sync 4.1, 4.2, 4.5, windows 2000 SP4, xp SP2, different computer...just no luck, in bootloader mode it shows "serial" and "0.60" and whenever I plug in the USB, it shows USB, and then same, device not recognized...what to do?
And when I start the device, on blue background imate logo..it shows Radio 0.00.00, what does it mean..I can't even upgrade it as USB is not recognized...waiting for flash from SD, but no luck. Can any one sort these things out

First problem, almost definitively the battery.
Second and third problems could even be correlated, first the third problem/doubt, even if I'm not a complete expert, this means that your device was "unlocked" with the aid of a specific program that does just that (if you're interested in knowind how, go to the uni's wiki and read about unlocking), the Radio version 0.00.00 is just a "by-product" of that process.
So, if you're asking about this, you didn't do this by yourself, so you don't know what and how much has been done to your PDA, then for your second problem, first try a soft reset (this is always windows, remember it!), the re-connect the device (to the PC) and see what happens, then verify that you have the active sync program installed properly (and running) in your PDA, just when you connect the PDA to the computer, the active sync should become available as a running program, so, connect the PDA to the computer, the PDA turns on and says connecting, even if it does not connect to the computer you should see active sync running in your PDA, go to settings, system, memory, running programs and verify that it's there.
Another cause could be hardware (on your PDA), this means, cables and port or even internal (but this is quite unlikely).
Perform these tests and see what happens, then we'll see what else can be done.

Thnz, I trued several soft reset even hard reset,
I tried connecting to the computer with ActiveSync on, with some other software which changes the active sync connection to something like USB serial (from RNDIS ...), even advance networking off, taking out the SIM and memory card...running the device search..no luck.
and btw in computer after installing active sync it gives a window with all menu disabled except "File>Connection Setting". I tried by using bluetooth connectivity. No luck.
I read the thread about unlocking..and tried to do the rest..I mean the second step of unlocking, it showed device successfully unlocked..but all the same.
Any help....

mamaich method
Try this,
Step by Step :
get the tools at attachment , as mamaich told, you have to use it in bootloader mode , (Power + Light Bulb + Reset)
1. Stop Activesync USB connection
2. Uni : Reboot Bootloader then Connect USB
3. PC : Run mtty1.42.exe
4. Choose USB in "Port" (Reconnect if can't find/reconglize USB and try remove sim and sd card)
5. type : task 28 55aa
6. Press Enter
7. Cause DOC reformatted, so there's no rom in DOC ,try reflash any rom that you like .
For task 28 55aa in mtty success , will show the message (attachment )
DONE .

Active Sync Problem

Hello guys,
I have a problem. My p3300 does not connect through Active Sync.
Its everything oright, and with my S200its orght.
The rom is not the original, is a WM 6.1
Is possible that exist some sort of problem with that rom that doesnt connect with the pc, or is the phone USB port (it charges, but don't comunicate).
How can i change the rom, without been with active sync?
I have a SD 2gb card, but i can't make a partition on it, and make a SD Flash. :S
Can anyone help me?
Thanks

de-install activesync
download and install the latest version of active sync
make sure that on the conncetions tab the USB connection is tabbed
goodluck

Hey there, and thanks,
I have already make that, and still nothing.
Reinstall the A.S. 4.5, soft reset the pda, and reconnect, restart the pc and still nothiing. :S with my S200(prophet) don't have any problem. :S
More help required :S
tnx

I have the same problem i cant sincronize the pda whith the activesync and i wish to change the rom. Now it's in france and i wish to change it to english, and it's locked to orange france i think. What can i make? It starts in bootloader, but the instalation from the card is not starting. thankx
le. and if i want to install something gives error 260

hm. well to get back at you thinking it might could be your rom, i dont think so.
did u test the usb cable?
did u test it on another pc?

...
quick question...
does it charge?

(i know sounds daft..but...)
or have trouble charging sometimes?
it could be the pins not connecting properly on the device to usb..
*______
/ . == . I
look at device, turn it upside down, now look at the charge slot on device..
Imagine the little picture iv drawn is the charge slot on the device..
''.'' are the ''pins'' on the device..
get a pin and sprize/pull them out SLIGHTLY..
the ''pins'' are hard to see but this could be the problem..
* my p3300 stopped charging, activesync, the lot.. this is MY quick fix!
(hopefull yours too!)

lol
vrumvrum said:
Is possible that exist some sort of problem with that rom that doesnt connect with the pc, or is the phone USB port (it charges, but don't comunicate).
Click to expand...
Click to collapse
just give it a try.. i now know it charges tho.lol

Yes it charges, and i tryied another pda to connect to this pc and it works fine, i changed the mini usb connector, because it was broken

mvenneker said:
hm. well to get back at you thinking it might could be your rom, i dont think so.
did u test the usb cable?
did u test it on another pc?
Click to expand...
Click to collapse
Hello,
Yes, i tested with other pc (4 pcs in total), and the P3300(artemis) isn't recognize by Active sync, but it charges through the usb, but with my S200(prophet) don't have any kind of problem, and connect a Razr X (motorola) to test the cable to and keep working to, so the problem is in the phone.
I tried to clean the conector and all usb contacts still in place and working (have te 5 pins and they move up and down, normally)
in bootload mode it recognize by apearing in the bootom left the USB indication, but have the 260 error in everyway i try to connect the phone to pc.
any help?? :s
Thanks

...
try this out for now..... just try it...
* disconnect the device from pc..
* hard reset the device..
* reinstall active sync..
* turn pc off and then on again..
* reinstall active sync..
* turn pc off and then on again..
- when the pc has fully start up..
* connect device..
* i know you already said you have tried uninstalling activesync and reinstalling it but just try it again but this time reseting your pc once its uninstalled.

...
download this..
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/activesync-download.mspx

raving_nanza said:
try this out for now..... just try it...
* disconnect the device from pc..
* hard reset the device..
* reinstall active sync..
* turn pc off and then on again..
* reinstall active sync..
* turn pc off and then on again..
- when the pc has fully start up..
* connect device..
* i know you already said you have tried uninstalling activesync and reinstalling it but just try it again but this time reseting your pc once its uninstalled.
Click to expand...
Click to collapse
Hy there, i done it more than 5 or 10 times in the 2 home pc's. and nothing.. been the same.
raving_nanza said:
download this..
microsoft.com/windowsmobile/en-us/downloads/microsoft/activesync-download.mspx
Click to expand...
Click to collapse
Hi there,
I have already download the most recent version (AS 4.5), 3 times, and reeinstaled more than 5 ou 10 times, on the office pc, and home pc's.
It's still the same, no connection or syncronising :S
Don0t know more what to do.. :S

...
if that does not work, i dont know what it can be.. sorry mate, if i find out why its not connecting ill let you know..

Just an idea.
On your device (not on PC)
Go to Start->Settings->Connections->USB to PC and change the setting (tick or untick the extended network option)
BR
Scootie

scootie said:
Just an idea.
On your device (not on PC)
Go to Start->Settings->Connections->USB to PC and change the setting (tick or untick the extended network option)
BR
Scootie
Click to expand...
Click to collapse
done and nothing, it still the same.. :s
but thanx anyway
regards

Have you try Hard Reset ?
Hi,
My first post here and try to help !
Do you know how to hard reset your Artemis ? it has works for me one time with the same problem...
But you have to save ALL your data first and reinstall everything after...
(you will find in the forum if you don't know how to hard reset)
Good luck !

i don it a couple of times, with no sucess. :S
I tried to flash a new rom throught the SD Card, but with no sucess to..
i download several ones, and keep to tell that its a invalid certificate, and tried othr been from HTC, tht dont do anything, pass directly to the 3 color bar menu. nothintg more hapend.. :S
If it help.. :
Rom version Touch_AF pTG - WM6.1
radio version 02.94.90
OS: 4.1.0.7
IPL:3.13.0001
SPL.3.13.0000
Cheers

Wrong SPL I think...
It help ! But I think it's not a good news...
It seems that you haven't CID unlock your device before flashing a new ROM... but you need to have a good working active sync connection to do it !
see : artemis USPL in the forum or artemisUSPL_nosize (i cant' post url)
(with the second one you can flash any ROM size without any problem)
Maybe if you find a way to do it with SDCARD, you will be able to flash a new ROM, but maybe you have a hardware failure...

Castorlama said:
It help ! But I think it's not a good news...
It seems that you haven't CID unlock your device before flashing a new ROM... but you need to have a good working active sync connection to do it !
see : artemis USPL in the forum or artemisUSPL_nosize (i cant' post url)
(with the second one you can flash any ROM size without any problem)
Maybe if you find a way to do it with SDCARD, you will be able to flash a new ROM, but maybe you have a hardware failure...
Click to expand...
Click to collapse
Hi,
but theres my problem.. i dont have a working A.S. connection between the phone ad the pc. :s
most probably is the rom that don't communicate with the computer, because it charge, so the usb is ok. :s
ill try through Blue ttooth to syncro the Uspl, and then try to change the rom through sdflash.. i'll pray to God to this work..