Is it possible to have a half dead hermes - 8525, TyTN, MDA Vario II, JasJam General

I had my 8525 plugged in during the night when a storm came through and we lost power. The next morning I realized my status leds didn't work and it takes along time to find a signal after a soft reset. I do know that the leds work because last night when I plugged the phone into charge the led came on and wouldn't go off. I checked it at lunch and it was off. I tried the Nuled program to control the leds and that didn't work any ideas.

try a hard rest. I'd also check on mtty in case of bad blocks...
Cheers....

Related

universal dead?? HELP red light!!!!

Hello, earlier today i felt the device was very warm, i tried to switch it on but it dint respond, even to a reset. when i plugged it into the wall charger all i get is the right hand LED glowing red.
HELP!!!!!!!!!!! how do i hard reset it or get it to work again!!!!!!
i would call in orange care, but im out of the country and i really need the pda functionality!!!!
Unlucky. The 'red' light on most HTC devices indicates a serious power problem, usually it means that the battery is dead (as opposed to simply having run out of charge) or very close to death. You can probably get it working again with a new battery, if the incident hasn't damaged any other components.
i had this with my JJ after I accidently let the battery run down, I plugged it in and led went red and unit would not power on, left it plugged in started scanning the manual and web about a red led, 30 mins later, JJ just switched on and all fine.
It's worth a go and ive not had problem since
i dont think that was the case...
i have a feeling it might have been a short or something, because the unit was SERIOUSLY hot.....
nothing i did worked....until............
final time before giving up, the light was still red etc.
i figured what the heck, either way its dead and im going to get a replacement.
i then gave it fairly hard thump
the red light disappeared. i thought to myself, oh crap, i've really killed it.
then i reset it............. IT BOOTED UP!!!!!!!!!!!!!!!
and all my info still intact......brilliant.....im still going to try and get a replacement when i get back, but thank goodness.
and here i was thinking the last computer to respond to physical violence was the old 486'es hehehehehe
afhstingray said:
and here i was thinking the last computer to respond to physical violence was the old 486'es hehehehehe
Click to expand...
Click to collapse
Actually, it's called percussive maintenance, "the fine art of whacking a machine till it works"
hehe, i'm an IT technician and it's the first thing i try, especially with Printers.....
They don't teach you that on MSCA courses.....
I would recommend not using the machine too much until you can get a replacement battery if I were you. Lithium batteries will get very very hot (in some cases expand and ignite) if they are dis-charged too far. Most equipment which uses lithium technologies will have a voltage cut-off on the power input. As each cell is a nominal 3.3V-3.6V, this is often at around 3V in order to not discharge the battery too far. I would have hoped that this was a HARDWARE function rather than software. However with what you have described, if the voltage cutout was somehow disabled, then this could explain the problems.
Of the units that I have seen in the past like this, the red LED would describe the battery voltage being too low to safely power the unit (i.e. battery be dead). Generally a couple of minutes charge will bring it up to a safe working value. However, after 30 minutes this certainly should have been enough. On one of my motorola units, the battery has expanded a couple of millimeters as it starts to dissociate. It may be worth you checking to see whether the battery in your universal has distorted in any way.
Hmm the red light comes on mine all the time.
It just means the battery is low and the unit is charging. .
It should turn green when the battery is at or near optimum charge.
no....thats not the red, charging is orangy when i say red i mean PROPER red. battery is not distorted, and to the best of my knowledge the unit had a good charge, im pretty sure it must have been some kind of hardware short, and am going to call orange as soon as im back in the country.
dosent explain though why when i whacked it it started working again. the whack instantly made the light go out :wink:
i did a battery rundown test as soon as i got the unit, and posted the results on the forum, if the cut off was not working, i would have ended up with a red light then.
i dont have the manual with me now, but is there any documentation on the red light?
Found this site which had an online manual:
http://www.rich-michael.com/pdf/User Manuals/050802_Universal_Generic_Manual_English_CDL.pdf
What does the phone say in the Power Tab?
A really useful extract:
13 Notification LED Bi-color LED on the right side: Green and Orange
for GSM/WCDMA standby, SMS message, GSM/
WCDMA network status, notification, battery charging
status.
Bi-color LED on the left side: Blue andGreen for
Bluetooth system notification of powered-up and
ready to transmit radio frequency signal, and Wi-Fi
status.
Couldn't find anything else on the LEDs
Found this site which had an online manual:
http://www.rich-michael.com/pdf/User Manuals/050802_Universal_Generic_Manual_English_CDL.pdf
What does the phone say in the Power Tab?
A really useful extract:
13 Notification LED Bi-color LED on the right side: Green and Orange
for GSM/WCDMA standby, SMS message, GSM/
WCDMA network status, notification, battery charging
status.
Bi-color LED on the left side: Blue andGreen for
Bluetooth system notification of powered-up and
ready to transmit radio frequency signal, and Wi-Fi
status.
Couldn't find anything else on the LEDs
Sorry to drag up this old post.
My friend dropped my phone (Orange SPV C500) a few days ago on to a tiled floor. The phone didn't appear to be broken or faulty at all at the time. I even managed to use TomTom navigator to go to the airport, but for some reason when I looked at it before I went to sleep, the phone was off. I assumed the battery had gone (even though it should have lasted at least another day). I tried to plug in the mains charger, but the LED showed a red light. I left it plugged in while I slept, but it was the same in the morning. The phone won't power on at all. I've read that this normally happens on a flat battery, but I am pretty sure it still had juice for another day.
I brought a new battery, but to no avail, the phone still shows the red light when plugged into the mains. No light at all when plugged via USB to my computer. The phone won't power on at all.
It must have broke something when it was dropped. But I'm confused as to why it took a few hours to take any effect.
I also notice that even without the battery in the phone, the LED will still light up as red when plugged in to the mains.
I've tried whacking the phone now, but nothing. Anyone have any idea whether it can be fixed?
JOEJOETHEJOEY said:
Sorry to drag up this old post.
My friend dropped my phone (Orange SPV C500) a few days ago on to a tiled floor. The phone didn't appear to be broken or faulty at all at the time. I even managed to use TomTom navigator to go to the airport, but for some reason when I looked at it before I went to sleep, the phone was off. I assumed the battery had gone (even though it should have lasted at least another day). I tried to plug in the mains charger, but the LED showed a red light. I left it plugged in while I slept, but it was the same in the morning. The phone won't power on at all. I've read that this normally happens on a flat battery, but I am pretty sure it still had juice for another day.
I brought a new battery, but to no avail, the phone still shows the red light when plugged into the mains. No light at all when plugged via USB to my computer. The phone won't power on at all.
It must have broke something when it was dropped. But I'm confused as to why it took a few hours to take any effect.
I also notice that even without the battery in the phone, the LED will still light up as red when plugged in to the mains.
I've tried whacking the phone now, but nothing. Anyone have any idea whether it can be fixed?
Click to expand...
Click to collapse
this is damn scary! Every day more people add on to the "my univ's gone dead after a small drop" community :?
When my univ was brand new, a friend of mine dropped it from a coffee bar table 3 feet high, and i still heave a sigh! Cant believe nothing happened...!
But one thing i guess we all know, its a "drop" away to kiss our device good bye :roll:
hope you get it back up and running m8! look around the forums, there are lots of breakdown-solutions threads...
cheers,
San
nice work afhstingray
do you think it was a baterry problem.
i have often used my battery till tit just ran out, from what i read in the post it seems to be a bad practice. anyway to turn off the phone
i doubt it was a battery problem as i've been using it until now without problems. (i didnt get a replacement as soon as i got back cos im waiting for this unit to get a bit scruffy before i get it replaced)
i had this once on my c500 as well, but taking out the battery for an hour did the trick. so i dont think the problem is related.
i've dropped my universal quite a few times already and im happy to say other than a few annoying dings on the metal plate with the orange logo, its working fine. and 2 of the drops were pretty bad ones too, i thought for sure the screen would die or crack. guess i got lucky and it hit the floor at an angle not too critical
total stab in the dark but maybe a broken connection on charging circuit? that could be why phone was ok then battery died and its now unable to charge?
ViaraiX said:
total stab in the dark but maybe a broken connection on charging circuit? that could be why phone was ok then battery died and its now unable to charge?
Click to expand...
Click to collapse
wouldnt it have worked if it was plugged into the AC then?
Well my Exec was dropped onto concrete at the petrol station whilst I was trying to sort out TomTom and fill up my Yamaha R6 bike at the same time :roll:
No problems, just a couple of case marks.
I guess multitasking should be left to the ladies and computers :lol:
steverae said:
hehe, i'm an IT technician and it's the first thing i try, especially with Printers.....
They don't teach you that on MSCA courses.....
Click to expand...
Click to collapse
Also explains why Servers are built so solidly.
When you are trying to recover a server at 2am in the morning they need to stand up to all but a sledgehammer :twisted:

SPV C500 - RED LIGHT! :(

My friend dropped my phone (Orange SPV C500) a few days ago on to a tiled floor. The phone didn't appear to be broken or faulty at all at the time. I even managed to use TomTom navigator to go to the airport, but for some reason when I looked at it before I went to sleep, the phone was off. I assumed the battery had gone (even though it should have lasted at least another day). I tried to plug in the mains charger, but the LED showed a red light. I left it plugged in while I slept, but it was the same in the morning. The phone won't power on at all. I've read that this normally happens on a flat battery, but I am pretty sure it still had juice for another day.
I brought a new battery, but to no avail, the phone still shows the red light when plugged into the mains. No light at all when plugged via USB to my computer. The phone won't power on at all.
It must have broke something when it was dropped. But I'm confused as to why it took a few hours to take any effect.
I also notice that even without the battery in the phone, the LED will still light up as red when plugged in to the mains.
I've tried whacking the phone now, but nothing. Anyone have any idea whether it can be fixed?

Green LED

Hi.
Got my Nike about one week ago, and everything was fine but from few days green LED is turned on constantly, also if i will turn off the phone. It only goes off if i will take out the battery, but straight after putting it back into phone it lights up :/ When phone is turned on and the LED is on and i will slide keyboard out and in it goes off for some time. I turned off diodes in registry but it's still the same.
Can any one help me? It looks like it's draining battery much faster frome the time it happened for first time.
Thanks for help
not sure it will help, but test NUELED 1.5:
http://forum.xda-developers.com/attachment.php?attachmentid=111075&d=1220599385
Thanks for that app, but i don't think that it will help because led is on also when the phone is turned off, but any way i will give it a try.
Tried to hard reset it last night but it's still the same.
Regards

Won't turn on! :(

So last night at kickball, I sent a text to my wife. The next game, I wanted to see if she texted back, and my phone was off. I didn't remember the battery being low, but thought that perhaps it might have been. When I got home I plugged it in and got nothing. I tried to do the Power/Camera/Reset to see if it would go into bootloader; again nothing. I left the battery out all night, put it back in this morning, still nothing. I've tried usb charging and wall charging as well, with and without the battery. Nothing turns it on... is it done for?
Same thing happened to mine recently. I know the battery was low, and it turned off because of that. Never got it to turn on again.
The only sign of life mine shows is that the red led will turn on if you have it plugged into a charge with the battery out. Other than that, it's a paperweight.
Never got mine working again.
I took mine apart, and somehow got it to turn on again... it was a messy process.. something must be shorted out. Going to have to get something new soon.
i have just the same issue with moto milestone ... i am sure that the battery is fully charged, cause ive charged it with another milestone ... but that one simply won't turn on ... tried different combinations of sd/simcard/battery on and off .. still the same ... Any help would be highly appreciated.
same issue here, mine just stopped working yesterday, battery was fine, i did a soft reset randomly, and then it wouldn't turn back on. Both the talk and end lights are on, that's it..
Mine does the same thing since it was dropped in water. It had'nt been turned on for 2 years since I decided it would work! It still does the red light thing sometimes, but all I got to do is remove battery, try power button and repeat the process until it works. Try it out!

Phone possibly dead.

Hello,
Last week I was using my phone as usual, I put it on my desk for about 5 minutes and when I came back it had turned off. I tried putting it on charge but the orange led doesn't show any activity. The phone doesn't turn on and doesn't do anything. I tried booting it on recovery but that didn't do anything else. I also took off the battery and put it back several times.
Help!
rikikimaru said:
Hello,
Last week I was using my phone as usual, I put it on my desk for about 5 minutes and when I came back it had turned off. I tried putting it on charge but the orange led doesn't show any activity. The phone doesn't turn on and doesn't do anything. I tried booting it on recovery but that didn't do anything else. I also took off the battery and put it back several times.
Help!
Click to expand...
Click to collapse
try cleaning the battery contacts and also the usb contacts, i had mine where it wouldnt charge all night and died and it was just dust caught on the +5v pin of the usb connector.
There is lost of dust in the usb connector, you should try to clean it. The battery might be dead, you can try to buy another one but...
That didn't work. (does the led light turn on if there is no battery in the phone or it must have one inside?)
It does need to have one inside to lit the led
If you know someone with a DHD, you should try his battery. But your phone is probably dead... Fortunatelly, the GS3 will be announced soon !

Categories

Resources