Database Users

DVD ripping

What's the best freeware to download for ripping dvds to my xda2?

If you did a search with "dvd convert" on this site, you would have found al the info you need!
For instance here http://forum.xda-developers.com/viewtopic.php?t=4707&highlight=dvd+convert
Or you could have use "dvd rip" and found this: http://forum.xda-developers.com/viewtopic.php?t=1283&highlight=dvd+rip

Thanks. Didn't think to search with ''convert'', ''rip'' produced no results. Still doesn't really give me the noddy guide. I have divx and windows media player and encoder. Where do I go from here in 5-10 basic steps?

http://www.howardforums.com/showthread.php?s=799566190a12219516a1c87586aa4181&threadid=261926

This is my experience in ripping:
I rip to a version that can fit on a CD so I can watch it on a laptop, and then from that I create a PDA version. You can also create a PDA version directly but you have to create a pseudo AVI which takes around 40 minutes. I could not get Pocket DIVX working so I rely on PocketTV which plays MPEG videos. You'll fit a 90 minute film on a 256Mb SD card but when you go over that you need a 512Mb card.
Smart Ripper: DVD to hard drive
http://www.afterdawn.com/software/video_software/dvd_rippers/smartripper.cfm
To create PC version that fits on CD:
Flask: VOB files - AVI
http://go.to/flaskmpeg
Best use XVid codec for video, and MP3 codec for audio, I found max video bitrate to be 750, audio 96, video width: 512. Can get codecs in Nimos Codec Pack:
http://www.divx-digest.com/software/nimo_pack.html
To create PDA version only:
DVD2AVI: creates a pseudo AVI to be used in TMPGEnc
http://www.afterdawn.com/software/video_software/dvd_rippers/dvd2avi.cfm
Save the project (creates a d2v file)
TMPGEnc: AVI - MPEG
http://www.tmpgenc.net/e_main.html
Open the XVid avi file or the d2v file, I use a bitrate of 180-190, audio 96, use audio-edit, increase volume by 200% if you are going to watch the film on a train or plane.
If you are making a MPEGs from an XVid AVI, follow these instructions:
- With Nimo's Codec pack only install VidX and MP3
- Install FF DirectShow filter and follow the below:
The error you receive is because direct show does not have priority over the *.avi gfiles. So the fix goes as such. In TMPGEnc, press option, then environmental setting. Press on VFAPI plug in tab on the right hand side. In here you will see "DirectShow Multimedia File Reader" and priority -1. You need to make it +1, so right click on it and choose "Higher Priority". Do this twice to take it to +1. Now press okay and all is fixed. (Note that this error only usually occurs on xvid transcoding, so if you're doing anything else, you may want to revert the priorty.
If you have a Windows XP, change the compatibility mode of the TMPGENC EXE file to Windows 2000 in the Properties of the EXE file
http://sourceforge.net/project/showfiles.php?group_id=53761
PocketTV: for watching the MPEG file on your PDA
http://www.pockettv.com/
Advanced Bitrate Calculator is useful for figuring out bitrates:
http://www.divx-digest.com/software/advanced_bc.html

PocketDivXEncoder
Try this one:
http://divx.ppccool.com/index.php?lang=en

mp4 plays but no audio

Now I've read a lot here and I've tried Quicktime 6, mpegable ds decoder and 3ivx directshow filters.
They all work more or less (i like 3ivx best), but NONE of them plays the audio.
However the camera application on the ppc can playback video and audio.
What the hell is this? And I dont like Motion JPEG avi cause it's too big.
Converting also seems to be no option: I tried Riverpast Video Cleaner and a heavily upgraded virtual dub mod, but they can't even read the video. Quicktime Pro 6 can at least import the video, but no audio again.
Any ideas?

If someone wants to do more research, here are two good sites concerning mp4 players:
http://www.audiocoding.com/wiki/index.php?page=Software+Audio+Players+for+Windows
http://www.rarewares.org/
I've now tried WinMPG Video Convert and the Philips Platform4 Player - only video, as always.
I suppose the audio codec used is not the mp4 AAC LC (low complexity) codec because that's the most common one which can be played back by any mp4 player.
btw, mp4UI shows me a video and a audio stream (like most othre applications), but I can only export the video file and there is no information on the audio codec used, seems to be unknow to any program.
I tried several recorded mp4 files, always the same, and they DO playback video+audio on the ppc.

I'm sticking with MJPEG Avi
That's about 100 kB/s so I can hardly record more than 5 min. But hey who needs to? At least it can be converted by quicktime uncompressed avi export in no time, and then encoded to whatever you want.
More annoying is the fact that I need to remember getting the file off the pocket pc pretty soon because otherwise I will run out of space. I'd prefer taking a series of snapshots and carrying them around with me.
Well copying the file via USB will take almost as long as the video duration is, and a storage card can't be used because it decreases the recording frame rate significantly.
Motion MJPEG also seems to catch more redundant frames (the same picture in two frames) than mp4, but it's still okay.

cant you just record to your device and then copy the recording to your sd card manualy ?

Yes I thought of that, it would approximately take the same time as the video duration is. If you really need to do another recording while on the go, you can do that to free your memory.
btw, I chose divx5 250 kbit CBR + mp3 in virtual dub, only took a few seconds to encode a minute and now I've got a file that can be played back equally well on both machines. I'm using beta player for pocketpc, and it plays fine in fullscreen using the ati imageon chipset. File size is comparable to choosing the mp4 format in the first place.

It works now
mp4 video+audio works with quicktime!! hooray!!
Quicktime always told me it couldn't find the software needed on the server.
But when I opened the mp4 file today, the automatic download of the audio codec succeded.
Even with disabled firewall qt couldn't download the software before. Strange.
And I can export it to uncompressed avi if I need to edit the file with other programs.

mp4 video play back on PC

Hi Folks,
I just took for the first time a video clip with my Magician today, and had the Camera settings to
Capture Mode: Video
Capture Format: MPEG-4
Capture Size: Large
it produced a nice video clip file with in the .mp4 format (lets not talk about the quality)
I copied this file over to my SD card, and from there to my PC to play here.
It played by default using Apple Quick Time (7.0.3), no probs.
I tried to open it with WMP10 on my PC, and only got the sound, not video.
I was assuming, that a video clip taken with a Microsoft product (Magician WM2003) would play by default using the Microsoft pendant on the PC (WMP10), and MS does not rely on a 3rd party software (QT).
Any ideas what I'm doing wrong, or if I'm just missing the right codec on my PC to play back the file ?
Thanks

torklemm said:
Hi Folks,
I just took for the first time a video clip with my Magician today, and had the Camera settings to
Capture Mode: Video
Capture Format: MPEG-4
Capture Size: Large
it produced a nice video clip file with in the .mp4 format (lets not talk about the quality)
I copied this file over to my SD card, and from there to my PC to play here.
It played by default using Apple Quick Time (7.0.3), no probs.
I tried to open it with WMP10 on my PC, and only got the sound, not video.
I was assuming, that a video clip taken with a Microsoft product (Magician WM2003) would play by default using the Microsoft pendant on the PC (WMP10), and MS does not rely on a 3rd party software (QT).
Any ideas what I'm doing wrong, or if I'm just missing the right codec on my PC to play back the file ?
Thanks
Click to expand...
Click to collapse
Correct me if i'm wrong but i do believe the camera program on modern HTC devices (like the Magician) is made by HTC itself and not by MS. So it's possible it uses different kind of codecs.
MS isn't allowed to ship a lot of codec with WMP. Only some basic and MS-made codecs. So you have to rely on third party apps/codecs to play the .mp4 files.

Hello Torklemm
You can use the VLC Player to Play almost any type of media including the mp4 , 3gp etc etc .
here is the link to download it - h**p://www.download.com/VLC-Media-Player/3000-2194_4-10267151.html
You can also install the Nero Digital MPEG 4 AVC h.264 dshow decoder , after i installed this , my wmp ver 10 was able to play the Mp4 video files.
Cheers.

Sean_Dillon said:
Hello Torklemm
You can use the VLC Player to Play almost any type of media including the mp4 , 3gp etc etc .
here is the link to download it - h**p://www.download.com/VLC-Media-Player/3000-2194_4-10267151.html
You can also install the Nero Digital MPEG 4 AVC h.264 dshow decoder , after i installed this , my wmp ver 10 was able to play the Mp4 video files.
Cheers.
Click to expand...
Click to collapse
very useful decoder!
but only motion decoding not audio track.
i see only motion without sound.

Hmmm , That is Strange Vigor_ , I thought the audio recorded in the video format of Magician was either mp3 , wma or wav . . . all 3 being suported by wmp. Will have to check this Thanx.

It's none of those. The audio is AMR Narrowband, whatever the blazes that is! I've been having the same problem converting it. AMR doesn't seem to be supported by much.

mp4 format
You should use a plugin or converter program. For plugin Ulead video suite v9.0 is the best solution.For convert purpose I offer IMTOO program.Another way is using avi format instead of mp4

Where do you get that Nero Digital dshow decoder? A Link would be nice.

Re: mp4 format
bucat said:
You should use a plugin or converter program. For plugin Ulead video suite v9.0 is the best solution.For convert purpose I offer IMTOO program.Another way is using avi format instead of mp4
Click to expand...
Click to collapse
The same with me. I use ImTOO 3GP Video Converter 2.1.55.1107b, good stuff.

Where do you get that Nero Digital dshow decoder?
The File Is Attached To The Post , Please Log-in To View and Download it.

How to do it for free, though it's a ton of work
Okay, I've successfully done it now. My biggest problem was that imTOO 3gpp costs money, and I just couldn't justify spending the money on it.
There's probably a few different ways to do this, but here's how I've done it:
1) Separate the Video stream from the audio stream
I used Microsoft Graphedit for this. It comes in a Microsoft SDK, but if you google it, you can find it.
When you open graphedit and select render the file, you'll get a message saying that part of the stream isn't recognised. That's the AMR audio. That's step 2, so ignore. Assuming you've got an xvid mpeg 4 codec on your machine already (and I suspect also a 3ivx codec), a graph will show up starting with your video file and ending with a video renderer. Click on the video renderer, delete it, and click on the xvid decoder and delete it. Then add a filter called file writer to the video stream coming out of the 3ivx media splitter.
Run that and you have an xvid mpeg-4 video stream with no audio.
2) Separate the amr audio stream
I used Miksoft 3gp decoder for this. For some reason I couldn't do video with this tool, so I just clicked the "convert audio only" option. It gave me a PCM .avi file.
3) Mix the two together
I have used two programs for this, both locatable through google and both freeware. Virtualdub and TMPGENC.
Virtualdub is handy if you have to rotate the video stream. I don't think you can use virtualdub to finalize the video because the .avi sound file kicks up an error for me. But the video I wanted to convert was filmed on my JAM with it held lengthwise (aka 320x240), so when the file is normally viewed, you see it 240x320 and have to tilt your head.
I prefer to use TMPGENC and end up with an MPEG-1 file. Here's why...
You input the xvid video file as the video source, the .avi pcm audio as the audio source, under advanced, select "Full screen (keep aspect ratio)" instead of the "full screen" that is presented there, and then let her run. You end up with a video in mpeg-1 that is formated to 352x240 (NTSC vcr resolution), but with black stripes above and below so that the image isn't stretched or distorted, like it would be if you just went with "full screen". You can then convert that into an avi file with whatever software you want.
It's a ton of work to do, but for me, it was a better solution than spending another $30US on something I'd use minimally. I also do a fair bit of video work, so I had all the other tools and codecs handy.
Good luck!

Hi
I use apples Quicktime - pro can also convert to AVI's.
BR
Daniel

The way I did it was to get the K-lite codec pack. Google it and don't download any versions from places that try to charge you for it, it's free. Also be aware of dodgy sites that may include spyware/malware with it. I've been stung a couple of times.
Then nearly any freeware converter will work. You can also play them in WMP.

Errrr...yes, that would seem to be a "faster" way of doing it...

screen capture
hmmm, need help...can't seem to capture images (using the screen capture button) when playing mp4 files on the vlc player...i've imported the image on adobe photoshop but it was distorted...help?

this is for info in relation to the original post
I too could not play my mp4 videos on my PC with sound and tried all the various players and plugins but this link from last year worked
http://forum.xda-developers.com/viewtopic.php?t=12308&highlight=mp4

which video encoder

Hi I'm thinking of encoding video to playback on the Tytn, can someone please recommend a software that will keep the movie size small while maintaining quality.
Thanks

i've always found best results with avi format. TCPMP is available for free for the tytn but does have a playback issue which is very simply worked around.
As for software for converting your videos, I use CarryDVD (not free) for converting my dvd's - I found converting a DVD movie to a 250-300MB avi gives excellent results. For converting non-dvd video files, eg. larger avi files, I use the free version of Lathe - PocketDivX Encoder with Xvid and 2 pass encoding checked.
Hope this helps.
Matt

Ive used AutoGK, it encodes from several sources (including VOB files from DVDs) into Xvid or DivX.
I personally encode into .avi using Xvid (it does a 2pass Mpeg-4 Xvid encoding to .avi) and audio is encoded in MP3 at 128kbit VBR. And i set it to encode into 320x240.
Using Coreplayer (or TCPMP) it plays back FLAWLESSLY.
For example ive encoded an episode of the simpsons (22mins) from DVD into a 60Mb avi file and its just perfect playback on the TyTN. The performance TCPMP/Coreplayer seems to depend somewhat on the ROM you are using.
An excellent guide for using AutoGK alongside DVD Decrypter (both freeware) is found HERE on doom9.org. Using my analogy the filesize you set in AutoGK can be found using 5.45*minutes.
Use half that if you are encoding a low detail picture such as a cartoon (as i did with the simpsons). So for example a 30 minute video of a properly filmed source (ie friends, or cheers etc..) would use a filesize of 163.5Mb.

Guest69 said:
i've always found best results with avi format. TCPMP is available for free for the tytn but does have a playback issue which is very simply worked around.
As for software for converting your videos, I use CarryDVD (not free) for converting my dvd's - I found converting a DVD movie to a 250-300MB avi gives excellent results. For converting non-dvd video files, eg. larger avi files, I use the free version of Lathe - PocketDivX Encoder with Xvid and 2 pass encoding checked.
Hope this helps.
Matt
Click to expand...
Click to collapse
Thanks Guest69, i've downloaded the trial version of CarryDVD, if I like it i'll buy the software.

Not free, but I am using CloneDVDmobile from slysoft. $39, iirc, though I got the suite (ripping and decoding as well) a while back when it was on sale. Yes, there are free versions that do much of the same, but quite honestly I got tired of going multiple places to get updates. Seems to work well for encoding.
Just figured out that you have to choose the Raw Framebuffer option and NOT the ATI Imageon (in the TCPMP Video Options) in order to get normal playback on the hermes. I've got a recode of Madagascar that looks great at 300MB for the 80(?) minute movie at 320x(whatever the 16:9AR works out to). There are some tearing-like transition artifiacts, and minor artifacting if I keep my eyes within about 10" of the screen (which is as close as my old-fart eyes can focus).

I get good results with virtualdubmod. Have a look here: http://zodiacguide.sitesled.com/
I started off using the guide, but like to have as much control as possible so now I don't. Obviously depends on the codecs you install, but I like it.
Possibly not the simplest one-stop method.

Which Video encoder
Hi
I use a product called DVD Catalyst there are two versions and you can download a Full 7-day uncrippled trial version here
http://www.pocketdvd.ca/
The program is a all in one ripper DVD to PDA/IPOD/PSP etc
Colin

Try Super. Completely FREE and converts between nearly every file format imaginable. You do need to play with the settings to get good results though. Try 300-400KBps to start with and increase / decrease based on performance, and remember to use single channel and fairly low quality sound to keep the file as small as possible (unless you have decent earphones (and an adapter ))

Super is good but doesn't not give you a 2-pass encode option. Try something like PocketDivxEncoder which has the 2-pass option for encoding to Xvid. It's also very easy to set up and fast.
I actually use WinMEnc. not as polished or professional as PocketDivXEncoder but will convert from DVD or .avi file and is excellent quality plus the second pass is twice as fast as PocketDivxEncoder. (Both are based around Mencoder). For years I did it manually using VDub Mod and even Auto GK.

Another vote for Super. Excellent program for converting any format into any format.
And completely free.

overzeetop said:
Not free, but I am using CloneDVDmobile from slysoft. $39, ....... I've got a recode of Madagascar that looks great at 300MB for the 80(?) minute movie at 320x240.
Click to expand...
Click to collapse
I've got CloneDVDmobile as well. I've used the full CLoneDVD for years with great success. The default for DVD encoding on CloneDVDmobile is set at a quality level of 23 or about 556 meg for a 2 hour movie. What quality level are you finding works best for the Hermes and DVD encoding to get as small an AVI file as possible without making the video un-watchable?

I try to keep my avi files to around 300mb per movie. This seems to keep a sharp picture even with action scenes.

Best way to play Movies on Rhodium :)

Dear Friends!
I spent last two weeks trying different app's to get best solution for Movie experience on our beloved Rhodium/Tilt2/Touch pro2 device.
The main idea was to get divx movie to play smoothly and to get best quality as possible.
As we know H.264 codec (mp4) is hardware supported and it gives best results.
So considering that, I got best video experience with inbuilt HTC player that supports hardware acceleration for video.
It does not have a lot of options, and scrolling forward and backward is a little cumber stone, but it provides the best picture so I think (IMHO) is still the best choice.
When Choosing right software my main goal was to have as few steps as possible.
I found that the easiest way to do the conversion is with ImTOO Video Converter Ultimate 6. (http://www.imtoo.com/video-converter.html)
I tried a lot of different software, Trial and Freeware, and ImToo proved to be the best from lot of different perspectives. So it's my number one choice for this task (and also some other video encoding stuff.)
STEP1. Subtitles (Skip to STEP2 if You don't need them)
In case English is not your native language, you would probably (like me) want to have some subtitles with your movie:
You will need to convert *.srt and *.sub subtitles to *.ssa type, so You could get 'Outline and Drop Shadow' effect.
'Subtitle Workshop' (http://www.videohelp.com/tools/Subtitle_Workshop) seems perfect for that. (It has all needed settings and also Batch conversion option)
Press Shift+Alt+L to get to Settings/Output menu, where You can set the subtitle settings like Font, Color, etc.
Choose SubStation Alpha (*.ssa)
Border style: 'Outline + drop shadow'
Font:Arial, Bold, 22, (works best for me), encoding...
Load Subtitle and save it as SubStation Alpha format or use Batch Converting option under Tools/Batch Convert options (Ctrl+M) (if You have more than one subtitle to convert):
-set the source folder for subtitles, output folder, FPS and SubStation Alpha format.
STEP2. Encoding to H.264 format with Imtoo
a.Load your video file
b.Load the profile in general video format/ 'H.264/MPEG4 AVC video'
and set conversion settings to
Video: (Manually enter!) Video Size 800x480,
Note: If You enter for example 576x432 instead 800x480, there will be no sound on your HTC, only video. Don't ask me why, it's the same thing that happens to lots of people with many different encoders and it has something to do with AAC settings detailed, which will also change, when you change video settings....but I am not enough in to hardcore encoding, to understand what is the reason, I only know that this problem appears to be very common when converting for Rhodium with different software....
Bitrate 256K, Frame rate 25FPS(should be same as sub file FPS!)
Audio:Mpeg-4 AAC, 44100, 128K
Now You should set/add Subtitles:
Go to: Edit/effect/Subtitles. (Note: only Ultimate version of Imtoo!)
Add Sub if not already there, and set font to Arial, Style to Bold and Size to 22 (or smaller if You prefer)
Convert the movie and transfer it to Your Touch pro2
That's it!
Enjoy playing Your file on HTC.
Final Output size of the file is not the same as stated Output Size, nor it is the Bitrate. Imtoo bug I guess...But File plays smoothly enough at least for my taste.
Try and let me know how it works for You!

What i do is open you tube in chrome and i already have chrome extension installed on chrome.http://www.chromeextensions.org/music-videos-photos/chrome-youtube-downloader/. So when i play video i get options to save video in all the available formats and the Mp4 video i get is usually 20mb or 25 mb (sometimes less than that) in best quality.
Other thing you can do is go to this site http://keep-tube.com/ and downlaod video in MP4 format in great quality.
I think the best option is chrome extension because you get best quality video/audio with less size
Give it a try.

I don't know why you do this, just download core player
I watch LOST season 6 on my phone just download jackos s2 rom and disable manila for better performance

I use Pocket Divx Encoder to make xvid files of my favorite videos and then play them with CorePlayer using the QTV setting for best quality.

I use DivX Player. It was made for QVGA but works just fine on TP2, just the menus & fonts are small. It'll play DivX encoded AVI's that must DVDRips are.