Hello together,
I have problems to connect my PDA via Active Sync. The computer trys to connect, but the connection failes. I happens on my computer at work and at home.
So if I reinstall the pda with factory settings it works again.
But why?
Someone knows this problem?
I use the newst AS with XP and already tried to reinstall the software and configured the USB to PC connection settings at my device.
The only way to connect the PDA again via AS is a hardreset on my device.
I have this problem all two or three months.
Best regards Karl
Related
All,
I am currently able to charge my TYTN, but unable to get a USB connection to activesync; any ideas?
I have tried switching off the usb advanced but i doesn't work...
When I soft reset while the USB cable is connected it starts up in bootloader but does not show it is connected via USB.....just nothing but the bootloader startup screen.....
IPL is 1.01 and SPL is 1.04.
My rom is the latest South African....
Ant help would be very nice,
Cheers,
HJ
sounds like a firewall problem. Try disconnection from the internet and disable your firewall. If it connects then, adjust the firewall settings before reconnection to the internet.
I had the same problem with EZ Firewall
Nope, it is not the firewall, it used to work perfectly and it suddenly doesn't...
2 different computers have the exact same problem..any ideas?
I'm sure you've probably tried these, but just in case:
Reset device & stop activesync on device (memory/running programs)
Reboot laptop/pc
check in task manager that activesync is not running in the background
Delete existing partnership in Activesync & set it up again
marisa4755 said:
I'm sure you've probably tried these, but just in case:
Reset device & stop activesync on device (memory/running programs)
Reboot laptop/pc
check in task manager that activesync is not running in the background
Delete existing partnership in Activesync & set it up again
Click to expand...
Click to collapse
Yeps, tried all of that.....even ahard reset....
But still no succes, now back to syncing via IR....
Just :
START > SETTINGS > CONNECTIONS > USB to PC (then untick this box)
Then try again, worked OK for me!!!
use USB switch program
try install this program in your PPC and after that change activesync via serial instead of RNDIS.
worked on my Unieversal but i do not know yours
i don't think you need this program as it is already available in control panel -> connections -> usb-pc
hellejoep - any progress in solving this problem? I seem to be having the same problem with mine - tried activesync 4.2 and 4.5 on two machines - running the latest SA ROM.
pole_vaulter12 said:
hellejoep - any progress in solving this problem? I seem to be having the same problem with mine - tried activesync 4.2 and 4.5 on two machines - running the latest SA ROM.
Click to expand...
Click to collapse
The weird thing is that I got it to work on my home WinXP pc with a different cable....
I need to do some more testing...
Cheers,
HJ
Unable to connect
Hi,
I have the same problem. Anyone solve this?
I have a cable that just wont sync, try a different cable maybe.
wpbear said:
I have a cable that just wont sync, try a different cable maybe.
Click to expand...
Click to collapse
I'll do and let you all know!
I tried another cable but that one also recognises my an unknow device.....is it somewhere in my USB drivers?
This pc is Win2k SP3, on my XP SP2 it was working....
Any ideas?
I had a defective cable. It did exactly what you are describing. All other cables worked fine.
Hi!
I have tried now on two computers (one old windows 2000 platforn with activesync 4.2 and the other with Windows Vista Ultimate x64 with WMDC) and on the old platform it starts to connect but after a while an error. On the new I get no connection to WMDC. I always use my USB cable. The cable works, both loads and turn my loadinglight from yellow to green. My smartphone is a QTEK 9100 Windows mobile 5.
The error occured after I did scan on the phone for duplicated files and removed them. Afterwards it just wont sync. I have tried some tools, turning of firewall, reinstaling and all of the stuff recommended on the WMDC but now I am lost
What should I do?
wwwlewis
You may have removed a critical file that you needed for syncing when you removed the duplicate files. Does whatever program you used for that have a restore option? If not, you may need to backup the files you want to save and do a hard reset.
I have tried a hard reset now and it still dosent work. Now I am deeply lost
Try going to start-->settings-->connections tab-->usb to pc and either check or uncheck the enable advanced network functionality check box and see if that fixes it.
I have the same problem...
I have the same problem, i can't sync with my pc. it only shows a balloon that said "Unrecognized Device". I can not find the usb to pc box to be checked... pls help me. thank you
I have tried to find the pc to usb tab but I just can´t find it. I am running a swedish version of wm 5, but it still should be under connections. But it isn´t.
First of all i really want to thank all the Helmi_c and all the developers; My BA is most updated running wm6.
Well much better than wm5 but I have some issues:
1. cant sync it with my PC in anyways (BT, usb etc), USB drivers are not working correctly.
2. sometimes when i pick or dial a call, i cant hear nething.
and last but not relevant to this, guys how do i stop my BA slider from falling down when I use keyboard.
1. Try delete the actual partnership in AS, sync again; if not reinstall AS on PC
2. No problem here with the sound.
same problem here
I upgraded my XDA2s, customized it,backedup, then upgraded my brothers XDA2s and used my customized backup on his XDA2s.
Now my XDA connects fine, but his doesn't !!!
Both our XDa2s's are identical in everyway.
tried a hard reset and restore from another backup and still no luck!
we were trying to save time re-installing the same softwares.
tried deleting partnerships, no luck. tried spb backup and clone, no luck.
any ideas!
Do you get any error messages on AS? Can you browse the internet from device?
usb drivers
can anybody post usb drivers i think this is the problem cause my device isnt installed properly it says problem with inf file.
whoever is able to connect his device to xp desktop via active sync usb connection, please copy the drivers folder contents from program files in active sync folder.
thanks, hope this works
Is your windows firewall enabled? Since WM6 activesync makes use of a LAN connection to sync with the PC, you must allow activesync trough the windows XP firewall, or disable the windows XP firewall completely...
no sound problems with me...
did you try to install WM6_SoundFix_.cab ?
A-
Please help me
when connect htc p3450 to my pc i get this message from active sync 4.5.0:
Active sync cannot connect to Windows Mobile powered Device. To trouleshout problem click OK
i try try to hard reset and soft reset but nothing. when i connect phone i hear sound USB device connected but just cant connect to active sync
i also try to reinstal active sync but again ...nothing :
any idea what to do?
I had the same problem before and what I did is to hard reset my phone
activesync worked fine again after that...
tjomibk has already mentioned he has done a hard reset.
remove active sync, download and install the latest and also update the drivers for your HTC.
tjomibk said:
Please help me
when connect htc p3450 to my pc i get this message from active sync 4.5.0:
Active sync cannot connect to Windows Mobile powered Device. To trouleshout problem click OK
i try try to hard reset and soft reset but nothing. when i connect phone i hear sound USB device connected but just cant connect to active sync
i also try to reinstal active sync but again ...nothing :
any idea what to do?
Click to expand...
Click to collapse
Try to un-check Enable faster Data Synchronization Under Settings\Connections\..
You do have Active Sync/Windows Mobile Device Center installed on you computer right?
Installed BsBTweaks on my HTC HD2, but now ActiveSync won't connect to my phone. PC O/S is Win XP SP2. I'm running WinMo 6.5 and have the latest ROM for the device from my provider, version 3.14.531.1. I get the message: "Critical communication services have failed to start. Try resetting the mobile device, and then connect again." I haven't yet made any changes to the device using BsBTweaks, I only installed it. Have tried rebooting the phone to no avail. I have to use Disk Drive mode to get at the pictures on my SD card. Is there a way to get ActiveSync working again? I'd probably donate to the developers if this problem could get corrected and I can reasonably figure to keep and use BsBTweaks. Thanks.
phlashlite said:
Installed BsBTweaks on my HTC HD2, but now ActiveSync won't connect to my phone. PC O/S is Win XP SP2. I'm running WinMo 6.5 and have the latest ROM for the device from my provider, version 3.14.531.1. I get the message: "Critical communication services have failed to start. Try resetting the mobile device, and then connect again." I haven't yet made any changes to the device using BsBTweaks, I only installed it. Have tried rebooting the phone to no avail. I have to use Disk Drive mode to get at the pictures on my SD card. Is there a way to get ActiveSync working again? I'd probably donate to the developers if this problem could get corrected and I can reasonably figure to keep and use BsBTweaks. Thanks.
Click to expand...
Click to collapse
Have you tried to restart your PC and try different port?
Sometime this trick works
silverwind said:
Have you tried to restart your PC and try different port?
Sometime this trick works
Click to expand...
Click to collapse
Restarted the PC - worked like a charm. Thanks a million. I can breathe again.
...And I just made a modest donation. Thanks very much.
Troubleshooting Sync Connection with Your Computer
You can often solve any temporary sync connection problems by disconnecting your phone from the sync cable, waiting a few seconds, and then reconnecting it. However, sometimes you may experience persistent problems related to your network connection (for example, your Internet connection). You may be unable to sync your phone while there is an active network connection on your computer, or the network connection may be cut when you connect your phone to your computer. If this happens, you can try switching to a serial USB connection for your phone:
1. On the Home screen, slide to the Settings tab.
2. Tap Menu > All Settings > Connections > USB to PC.
3. Clear the Enable faster data synchronization check box.
4. Tap Done.