Screen sometimes turns white while using camera..... - 8125, K-JAM, P4300, MDA Vario General

hi.....everyone
i have a problem on my 8125....when i use the camera to take pictures .. after sometime the screen turns white and will not give it up for some time....does anyone knows why is this happening......do suggest some tricks and tips to solve this problem......thanks in advance

battery status...
Are you by any chance overclocking your wizard?

no....i have not over clocked....the clock speed is 185 mhz

For me, when I wake up my phone, sometimes the camera program randomly turns on. I don't know why.

this issues is happening all the time...when ever the phone goes into power saving mode...the camera screen turns white...i wont be able to take pictures....it will take couple of minutes to return to the original screen...or in some cases a soft reset is the only solution ...

i have same situation when phone rings - still cannot find out what is a reason - rom change is not working...
i am using bs, but machine is not overclocked.

HARDWARE?
If the problem exists with different operating system builds I would have to think it is a hardware issue. Unless of course on each build you implement the same third party application in which case the Software could be causing it....What type of software do you run? What is running in memory normally? This is what i would be looking at.

i am running XM6r5.... the memory is normal and i am able to many applications simultaneously....as soon as the screen turns while....when i hold it against a object for sometime....the screen gains some colorness and turns to normal...i didn't have this problem with the ROMs that i used earlier...i guess this requires some fix....

Related

universal fails to start sometimes

Hi,
I'm very happy with my universal (wifi and vga in pocketsize) only one thing is driving me crazy.
every, say once in 10 times the universal won't start when I press the power button. (after it turning off automatically after a few minutes when on battery power). Worse yet, it doesn't accept phonecalls and smses anymore either..so it already crashed silently. Unfortunately you can't see this from the outside since the lights still flash. I only notice it crashed when trying to start the device.
I've updated to wm6 because I thought it was a wm5 issue, but it wouldn't help. I also updated to radio 1.13 (the orange radio stack as found on this site). But this too, didn't fix it.
does anybody else have the same problem?? This problem renders my whole device unuseful. =^(
thanks!
Reinier
Welcome to the club...looks like no solution on this one yet. Here is a link
http://forum.xda-developers.com/showthread.php?t=272938
Some say it might be incompatibility with the SD card, but not in my case.
Hi,
that doesn't sound too good.
Anyhow, I'll experiment with it some more (what else can one do?) to see what is making it crash more or less (wifi/sdcard/simcard/battery?)
I'll post my findings... maybe we can find some mutual thing which might be causing it
I doubt it is software related since my whole machine is wiped clean and has nothing on it
R
yes, me too...and it seems to get worst as time goes by...anyways, I suggest that if you have any warranty left to send it back for warranty. GOodluck!
thats a pretty good point... ;^)
I'll check.
too bad it's quite vague description:
yes, sometimes it doesn't powerup..
you can already see the technicians there... they try it 4 times, it works everytime (of course) , and they send it back with a sticker saying 'correct'
ah well.... lets not get ahead of time.
r
Solutn found...check your PM
Check battery charge level
hi, i didn´t experienced that problem, but when i start up my device, sometimes, the start-up is really slow and the screen gets white but finally, i mena 2 or 3 seconds´ time it becomes normal.
Is that what experienced?
clemsyn said:
Solutn found...check your PM
Click to expand...
Click to collapse
What do u mean with PM?
DId u get the solution?
See ya folks
Solution
Check you PM means check ur private messages
A fellow here with the same problems sent his device for repair and the problem was voltage control unit of mainboard
Solution:
1. Install Pocket Hack Master and go to settings and disable the CPU scaling of the device. Then set it to start at startup. Then clock your device at 312 mhz before turning off the device or closing the clamshell. You can always clock it to 520 while using cpu intensive applications. Just make sure to set it at 312 before turning it off.
thank you buddy
Jumanji1212
Did it also work for you? I forgot to add that I am also using an external charger specifically for Universal because Im afraid charging it via miniusb might mess up the voltage control unit more.
Well, i normally charge it with the ac/dc adaptor but not always. Since i deleted spb diary today plug-in and installed the latest qtek spanish rom and radio, the time of the white-screen shorten.
clemsyn said:
Check you PM means check ur private messages
A fellow here with the same problems sent his device for repair and the problem was voltage control unit of mainboard
Solution:
1. Install Pocket Hack Master and go to settings and disable the CPU scaling of the device. Then set it to start at startup. Then clock your device at 312 mhz before turning off the device or closing the clamshell. You can always clock it to 520 while using cpu intensive applications. Just make sure to set it at 312 before turning it off.
Click to expand...
Click to collapse
Hello, I have the same problem (Power button does not start after an auto sleep).
My qtek 9000 however gives a blank screen when playing with the PHM speed tests. (When it is plugged in it works.)
Now I am a little afraid to do the "set it to start at startup"
Is there no risk it will never startup anymore?
Can I do this (temporaly) just for testing without the auto startup option?
So: disable CPU scaling and set the speed on 312 and put it in sleep mode.
I need my Qtek so badly that I get horribly stressed with this kind of things.
Huib

What makes PDA Hang?

Hi. i want to ask. what makes PDA hang?
I am currently using Atom Life.
And sometimes it hang. and i have to take out the battery and turn it on again. which is very troublesome and makes some of my sms gone as well.
it sometimes occurs when i turn it on. it also hangs there.
can anybody advice me on this?
thanks.
T3D0nG said:
Hi. i want to ask. what makes PDA hang?
I am currently using Atom Life.
And sometimes it hang. and i have to take out the battery and turn it on again. which is very troublesome and makes some of my sms gone as well.
it sometimes occurs when i turn it on. it also hangs there.
can anybody advice me on this?
thanks.
Click to expand...
Click to collapse
lol,
good question
the buggy Os makes it hang.
a Rom upgrade should solve the problem.
shaileshashar said:
lol,
good question
the buggy Os makes it hang.
a Rom upgrade should solve the problem.
Click to expand...
Click to collapse
however, i updated to the latest rom already. how is it? does RAM affect?
T300,
There are lots of things that can make your pda hang, probably too many to go into. I will try and give you the principal areas you need to address, which come from my own experience coupled to tons of reading on here.
1) Activesync - This has a habit of running all the time and is a prime cause of lockups. Use the fake server solution to solve that problem (search on here for it using google search. I will give you the google search link in a minute).
2) Software incompatibilities - You need to make absolutely sure that if you are running WM6, your apps are the latest version capable of running under WM6. I have had a lot of problems trying to run WM5 apps under WM6.
3) Battery and power locks - Make sure that all system locks are disabled. For example you can set your system to turn of the LCD screen or power of after a period of time. Make sure all of these are inactive/not set. If you want to turn your screen off then lighty touch your power switch and it will do the job for you. Touch it again and your pda springs into life; simple. You can use the device lock option on the today screen if you need to lock your screen with the pda on; no problems with this option.
4) Programmes running in the background - I strongly suggest that you set your pda to completely close down any programmes after you have run them, rather than minimise. Use the task manager option to sort this out or install the htc x-button app (search on here for that also).
5) Beams and Wifi - Make sure these are turned off unless you need to use them. Switch them off as soon as you have finished with them. Benefits are improved battery life and less freezes.
6) Inappropriate themes - Not all themes work happily with WM6. Some do lock up your machine. Keep it simple; load a standard WM6 theme that you know works and leave it at that.
There's more, but this should give you something to work on. I will add to this post as I remember other things.
Let us know how you get on. Google search for XA is:
http://www.google.com/advanced_search?q=+site:http://forum.xda-developers.com&hl=en&lr=&as_qdr=all
Cheers
WB

Massive Problems with battery

Hey guys,
at the moment I have a massive problem with my HTC HD2. Several month ago I flashed it with 6.5.3 and installed some little things, mostly for the design. Everything worked fine for 3 month, but now since this week, my HD2 is loosing battery extremly fast. If I charge it full, it is completly off after 20 hours WITHOUT using it. So I know the HD2 needs lots of battery, but if you don't use it very often, I could use it at least for several days and now, thats not possible anymore. I don't know why, I haven't changed anything. Also I think it got slower, so I checked for running applications with the task manager, but there is nothing????
So I'm kind of helpless right now, also I'm scared that I lost my gurantee with the update on 6.5.3.....
Do you guys have any ideas?
I'd try the easiest first and work your way down to the more complex things:
1) Re-calibrate the battery (sounds like you might have done this by completey running it down and then fully charging it.)
2) Remove the microsd card and see if you still get extreme battery drain to see if the problem is being caused by that.
3) Check that the wifi is idling when in standby and not staying connected.
4) Hard reset the phone.
Let me know if any of these shows a result.
I will do that, btw. I forgot one more problem. I have it often that I can't unlook the phone. so when its looked, the screen is black, normaly one push of any button is getting me back to the keylook screen where I can slide the button, but since I have the battery problem, I also have the problem that the screen stays black and only the hard buttons at the bottom are lighted, but the screen stays black. When I wait for some more time, than I can use it again, but for like 20 seconds its not usable.......it seems that something is using all the processor power.....DAMN this problem really freaks me out.
I know you said you checked for running apps with task manager, but if you meant the one that comes on the phone then I'd strongly recommend getting dotfred task manager (google finds it no problem). It's a much better task manager and gives you control over processes, rather than just listing them.
Edit:
Since it's so easy to google for it, I did it for you I'd only got as far as "dotfr" and google suggested it!
http://www.dotfred.net/TaskMgr.htm
Ok I have installed it, if I check the cpu usage the process filesys.exe is using around 95%??? If I kill the process the phone freezes....also how can I identify process which are not working probably?
Ok, its definitiv the filesys.exe process which is killing my phone......everytime the phone is extremly slow, the filesys.exe process is using 95-100% of the cpu. I don't know why and when this process is running, sometimes it does, sometimes not.....how can I stop this process from killing my phone?
I already have removed the microsd card and the wifi is also not odeling.

**IMPORTANT** Please Test. G-Sensor = Cause of 'Random' freezes + Bad Screen response

I Think I May have found the cause of the otherwise apparently 'random' freezes/hangs and total lack of touch sensitivity.
Basically, In my case at least, It Is the G-sensor/accelerometer.
I have been noticing increasing numbers of these freezes on Mattc 1.5 Froyo, Mainly in Landscape, Mainly in games.
TEST:
I installed 'Iron Sight' Game. (If theory is right then you should be able to use any landscape game, but please try Iron sight if possible.)
I Ran the game and it switched to landscape,
SO I PHYSICALLY TURNED MY HD2 TO LANDSCAPE.
THIS IS WHERE THE FREEZING AND LAGGING BEGAN!
On the Main menu found it difficult to press any options.
When I did manage to start a Game The control buttons were hard to press and the game was unplayable because screen sensitivity was just not there most of the game.
I Then Physically turned the HD2 around and Back to Portrait orientation, AND ALTHOUGH THE SCREEN ORIENTATION STAYED IN LANDSCAPE I DID NOT EXPERIENCE ONE SINGLE LAG OR FREEZE.
BUTTON PRESSES WERE RESPONSIVE TO TOUCH AT ALL TIMES FOR AT LEAST 15 MINUTES!
HERES WHERE IT GETS MORE INTERESTING....
I Then Turned the HD2 back around to landscape again and the Problems IMMEDIATELY RETURNED.
I THEN HELD THE PHONE VERY STILL IN LANDSCAPE AND AFTER A FEW SECONDS THE PROBLEMS/LAG/FREEZES DISSAPEARED AGAIN!!!
TESTED REPEATEDLY!
IN LANDSCAPE AS SOON AS THERE IS ANY PHYSICAL MOVEMENT, THE GAME FREEZES, BUT IF I KEEP IT STILL THE GAME RESPONDS PERFECTLY WITHOUT HESITATION.
Can some of you please test this theory?
A cradle/Dock would be handy for testing but it is possible to keep the phone still enough in-hand in my tests.
Use the game "Iron Sight" where possible, but use other games/apps too if you have time or inclination
Post the results below ( with logs where possible ?) Please.
Note:
After discovering the above, I did a search on XDA and found that a member called 'Hinky' and touched on this but I think I have narrowed it down.... I think
Please test and confirm (or debunk lol).
Thanks.
thesweeney said:
I Think I May have found the cause of the otherwise apparently 'random' freezes/hangs and total lack of touch sensitivity.
Basically, In my case at least, It Is the G-sensor/accelerometer.
I have been noticing increasing numbers of these freezes on Mattc 1.5 Froyo, Mainly in Landscape, Mainly in games.
TEST:
I installed 'Iron Sight' Game. (If theory is right then you should be able to use any landscape game, but please try Iron sight if possible.)
I Ran the game and it switched to landscape, SO I PHYSICALLY TURNED MY HD2 TO LANDSCAPE.
THIS IS WHERE THE FREEZES BEGAN!
On the Main menu found it difficult to press any options.
When I did manage to start a Game The control buttons were hard to press and the game was unplayable because screen sensitivity was just not there most of the game.
I Then turned the HD2 Back to Portrait mode AND ALTHOUGH THE SCREEN ORIENTATION STAYED IN LANDSCAPE I DID NOT EXPERIENCE ONE SINGLE LAG.
BUTTON PRESSES WERE RESPONSIVE TO TOUCH AT ALL TIMES FOR AT LEAST 15 MINUTES!
HERES WHERE IT GETS MORE INTERESTING....
I Then Turned the HD2 around to landscape again and the Problems IMMEDIATELY RETURNED.
I THEN HELD THE PHONE VERY STILL IN LANDSCAPE AND AFTER A FEW SECONDS THE PROBLEMS/LAG/FREEZES DISSAPEARED AGAIN!!!
TESTED REPEATEDLY!
IN LANDSCAPE AS SOON AS THERE IS ANY PHYSICAL MOVEMENT, THE GAME FREEZES, BUT IF I KEEP IT STILL THE GAME RESPONDS PERFECTLY WITHOUT HESITATION.
Can some of you please test this theory?
A cradle/Dock would be handy for testing but it is possible to keep the phone still enough in-hand in my tests.
Use the game "Iron Sight" where possible, but use other games/apps too if you have time or inclination
Post the results below ( with logs where possible ?) Please.
Note:
After discovering the above, I did a search on XDA and found that a member called 'Hinky' and touched on this but I think I have narrowed it down.... I think
Please test and confirm (or debunk lol).
Thanks.
Click to expand...
Click to collapse
Yes this is something that the devs have been discussing. It does seem that the freeze issue is in fact related to the g sensor. I don't know if anyone is working on it at this time but I believe Cotulla will try to sort it out for his September release
ala380 said:
Yes this is something that the devs have been discussing. It does seem that the freeze issue is in fact related to the g sensor. I don't know if anyone is working on it at this time but I believe Cotulla will try to sort it out for his September release
Click to expand...
Click to collapse
DOH! Didnt know it was already a known issue LMAO
I'll get my coat....
thesweeney said:
DOH! Didnt know it was already a known issue LMAO
I'll get my coat....
Click to expand...
Click to collapse
Lol keep with the testing though I didn't figure that much out
Hmmm this is def the prob for my touch screen issues. I tested a bit using the latest mattc Leo + Froyo w/Sense 1.5 version, with latest FULLRAM. I found that while on the sense home screen if I hold the phone out in front of me either landscape and portrait it's ok, and I can do whatever I want at full speed no lag at all. THEN if I lay the phone flat, It freezes. I did this like 20+ times and every time It would freeze whether I was playing a game or reading an email.
This also happen to me. Using Mattc 1.5 Froyo, it happens when using internet browser. The screen will freeze or not response right after i turn from Portrait to Landscape or sometimes have to wait for few seconds. I have to turn my device from Landscape to Portrait, and back to Landscape again, then the screen responses back to normal. This also happens in Copilot app when using in Landscape mode.
I turned off the screen rotation
What I did since i installed my ROM with 380mb ram is to turn off all screen rotation settings, so far so good, I haven't notice any freeze or lag so far in any application or while waking the device up, I used to have it and I hate it, I almost went back to Winmo!!.
robrob777 said:
What I did since i installed my ROM with 380mb ram is to turn off all screen rotation settings, so far so good, I haven't notice any freeze or lag so far in any application or while waking the device up, I used to have it and I hate it, I almost went back to Winmo!!.
Click to expand...
Click to collapse
This was the first thing i tried but strangely it made no difference.
anyone know how to totally disable the g-sensor?
doesnt have any of the mentioned problems...
iron sight lite runs the same for me when i hold the phone portrait or LS...
have no bad screen sens while holding LS...
running mattc 1.5 with the default zimage...
thesweeney said:
This was the first thing i tried but strangely it made no difference.
anyone know how to totally disable the g-sensor?
Click to expand...
Click to collapse
I want to know too! disabling auto rotation doesnt mean completely stop the g-sensor running.
Bimme said:
doesnt have any of the mentioned problems...
iron sight lite runs the same for me when i hold the phone portrait or LS...
have no bad screen sens while holding LS...
running mattc 1.5 with the default zimage...
Click to expand...
Click to collapse
Please tell me....
Did you fresh install 1.5 or upgrade 1.4>1.5?
I had quite a few freezes on 1.4.
Then I upgraded to 1.5 and kept my apps etc from 1.4.
I HARDLY HAD ANY FREEZES AT ALL
Then I did a fresh install of 1.5 and started getting LOTS of freezes.
i did a fresh install.
i deleted all android files on my sd card and extracted the new build to a new made "Android" folder...
i use xanny roms, and i still have the robovoice problem, so i can´t use android daily...
i noticed on all android builds ive tried sofar, that the polling interval of the gsensor is very bad/small. U can see it when u go to calibrate the gsensor, the bubbles move very slowly...
this is not a big thing when u only use the gsenor to turn screen to LS, but it is essential to play games using the sensor...
thesweeney said:
DOH! Didnt know it was already a known issue LMAO
I'll get my coat....
Click to expand...
Click to collapse
Lol, no worries I'm glad that you pointed it out. This was actually one of those really useful threads and the kind of thing that the developers are looking for. I am not a dev but I speak with them pretty regularly when the same issue are pointed out time and time again by those who do not read the threads. This was something that has not been talk about here so I appreciate your well thought post and the information that you provided
I was just a step before creating a new thread about it when I saw this one.
This is definitely one of the things that are really pissing me off using Android.
Furthermore, I did tests on this issue for quite long to doubt that it's an autorotation related issue. Maybe it has something to do with the g-sensor, but it still would happen randomly even trying not to move the phone at all. I noticed that the problem wouldnt appear that often when decreasing the polling interval of set cpu and same time increasing the min. freq. to 380, but still, it DOES happen.
I'd really appreciate any statement on this, developer side of course.
I have the occasional screen freeze on landscape, but not very often using froyostone.
Bimme said:
i did a fresh install.
i deleted all android files on my sd card and extracted the new build to a new made "Android" folder...
i use xanny roms, and i still have the robovoice problem, so i can´t use android daily...
i noticed on all android builds ive tried sofar, that the polling interval of the gsensor is very bad/small. U can see it when u go to calibrate the gsensor, the bubbles move very slowly...
this is not a big thing when u only use the gsenor to turn screen to LS, but it is essential to play games using the sensor...
Click to expand...
Click to collapse
Cheers for that ^
+1 for the Gsensor polling intervals seeming very slow.
THIS CAN BE SEEN VERY CLEARLY USING THE 'VR TUNNEL' LIVE WALLPAPER.
Here the cubes move smoothly at a good fps while the tunnel moves around at what appears to be 4/5 fps.
ala380 said:
Lol, no worries I'm glad that you pointed it out. This was actually one of those really useful threads and the kind of thing that the developers are looking for. I am not a dev but I speak with them pretty regularly when the same issue are pointed out time and time again by those who do not read the threads. This was something that has not been talk about here so I appreciate your well thought post and the information that you provided
Click to expand...
Click to collapse
Hehe, Thanks for that ^.
I dont feel quite so stupid now
For a moment there, before I found out it was a known issue... I thought I had discovered the Androids very own penicilin or something equally as important... but as usual I was behind the times lol.
Jealousy said:
I was just a step before creating a new thread about it when I saw this one.
This is definitely one of the things that are really pissing me off using Android.
Furthermore, I did tests on this issue for quite long to doubt that it's an autorotation related issue. Maybe it has something to do with the g-sensor, but it still would happen randomly even trying not to move the phone at all. I noticed that the problem wouldnt appear that often when decreasing the polling interval of set cpu and same time increasing the min. freq. to 380, but still, it DOES happen.
I'd really appreciate any statement on this, developer side of course.
Click to expand...
Click to collapse
Possibly not related to autorotation per-se, but...
With Autorotation disabled... If I turn my phone on its side (with volume buttons pointing towards floor) I still experience freezes on my home screen or anywhere else for that matter.
Plus I have found that holding the phone VERY still in any position seems to eliminate 'ALL' freezing and lagging problems.
Do the G-sensor and the Dgital compass 'interlink' or communicate in any way? Is it possible that the screwed up compass output is screwing with the g-sensor output?
I ask this because the game 'hungry shark' thought that my phone was flat whent the usb port was pointed down towards the floor.
Dont know if that makes sense but for me it seems like the g-sensor is fubar as well as the digital compass.
trilbyfish said:
I then used even bigger and bolder letters to emphasize my points!
Click to expand...
Click to collapse
[SARCASM]Very helpful buddy[/SARCASM]
I did the font size thing for people who just wanted to skim through the long post.
thesweeney said:
Possibly not related to autorotation per-se, but...
With Autorotation disabled... If I turn my phone on its side (with volume buttons pointing towards floor) I still experience freezes on my home screen or anywhere else for that matter.
Plus I have found that holding the phone VERY still in any position seems to eliminate 'ALL' freezing and lagging problems.
Click to expand...
Click to collapse
Well ofc, it wouldn't freeze when it's COMPLETELY hold still, but I guess that shouldn't be the point of daily usage.
Now when it comes to spontaneous outside actions, you are trying to pick up a call using touchscreen cuz ur used to it or trying to shoot out a text in hurry, and your device will just go sleep for some time. I mean, how'd you hold still if you're moving (fast)?
If you ask me thats pretty much a major bug, not to forget the 3g data thing. I'm not moaning around, just want to attain more focus on this. I notice people losing themselves in some benchmark trolling - just time waste.
There is already a thread for that (walking dead)
Just found a possible solution, please repport if it is better for you too :
- boot windows mobile, calibrate the g-sensor in settings (i did it 2 or 3 times, but i don't think its important)
- do a proper shutdown of wm
- restart wm + android
Sent from my HTC HD2 using XDA App
After disabling "Auto-rotate screen" I haven't had a freeze yet, so good so far.

Phone Keeps FREEZING!!! What the heck Samsung?!!!

My galaxy S freezes out of the blue, and i can't even turn it off. Sometimes i look to check the time, and noticed the phone is turned off. Both problems are only corrected by taking out the battery, and putting it back in...and then waiting for it to happen again!
Is this a software issue that 2.2 will fix? Should I exchange for a new one, or will all of them have the same problems, if bought from the same place? (Best Buy in Vancouver Canada)
either your battery is not good, or your got a defective phone
the new SGS out of the box works smooth
what is your firmware version?
type in
*#*#1234#*#*
Sounds like a bad phone. I got mine from one touch in delta and it has been perfect. Return asap and get yourself a working unit.
Sent from my GT-I9000M using XDA App
Thought you meant lag. Mine lags a lot (stock firmware) and sometimes "freezing" seems the word.
But no, that's not it. Perhaps you can try a hard reset and check your sdcard too, something isn't ok.
I'm actually experiencing the same issue. My phone goes black and seems to be happening more in low wireless connection areas. Like in a mall. With the the *# code I get I9000UGJG9.
if you have LAG issues, install the one click lag fix in the development area
problem solved
Its not LAG issues it a complete freeze issue. My phone goes black like standby mode and will not come out of it. The only fix is a battery pull or holding the power button for 6 seconds. The same issue as the op.
TDS1234 said:
Its not LAG issues it a complete freeze issue. My phone goes black like standby mode and will not come out of it. The only fix is a battery pull or holding the power button for 6 seconds. The same issue as the op.
Click to expand...
Click to collapse
that is a factory defect
take it back, exchange it for a good one
this latest firmware is really good, you should not see anything like that
Allright will do. I figured as much I didn't want to bring it back I already purchased some apps. Guess I'll have to wait for my store to get some.
TDS1234 said:
Allright will do. I figured as much I didn't want to bring it back I already purchased some apps. Guess I'll have to wait for my store to get some.
Click to expand...
Click to collapse
you do not lose the Apps
once you log back into your Gmail account in your new phone, when you go into Android Market, they will remain in the Download section
those apps are saved in your Gmail account, not in the phone.
that's the cool thing about the android phones
so if you ever switch to say an HTC Android, or a Nokia Android, you can still re-install those apps (assuming they are compatible)
Oh sweet I wasn't aware of that. I sold a couple of the Galaxy S and I'm the only one with this issue as of yet. Hopefully it isn't a common one. I've been trying my best to convert Iphone buyers in most cases when I'm sold out to get this phone I just hope it delievers for my customers and they won't have the same issue as me.
Are u futzing with oclocking or changing CPU mode ? This causes hangs with black screen
Sent from my GT-I9000 using XDA App
I believe this same thing just happened to me. Plug in my phone to recharge it (got it 2 days ago, so the battery still runs out quick) then tried to activate it and Lock screen wouldn't disappear when sliding.
mrfocus22 said:
I believe this same thing just happened to me. Plug in my phone to recharge it (got it 2 days ago, so the battery still runs out quick) then tried to activate it and Lock screen wouldn't disappear when sliding.
Click to expand...
Click to collapse
you do know you don't just slide
you have to move the entire picture of the "slide" out of the phone frame for it to unlock
if you say only slide it partially, it will just bounce back and remain locked.
if you have thick fingers it wont work properly
you might be better off using the 3rd party unlock screens, specially the kinds that needs no sliding.
i have that issues nowadays too. randomly "freezes" on the black screen, i can call through my phone (ringing) but there's no notification / vibration or anything or sorts.
the only way is to reboot the phone and it'll randomly happen again after some time >.> and the call that i've just missed isn't showing on the call-log either.
i hope it gets better overtime or i'll just have to reflash!
ps. was fine before i tweaked my cpu settings in sleep mode, you might wanna disable that if you're using it.
Mine has the same problem and by the looks of things a lot of people have this issue. I called customer support and after sometime the rep admitted this and said it will be fixed in next build however I doubt that
Then there are probably lots of diff units out there. The phone shouldn't freeze unless you are using a beta/alpha firmware (pretty unlikely - i've tested more than 10 different firmwares without a freeze), or set the core clock of the cpu to a higher & unstable frequency (OC). people claim that their phone can do 1.2ghz - that's nice, but each chip has a different capability.

Categories

Resources