universal fails to start sometimes - JASJAR, XDA Exec, MDA Pro General

Hi,
I'm very happy with my universal (wifi and vga in pocketsize) only one thing is driving me crazy.
every, say once in 10 times the universal won't start when I press the power button. (after it turning off automatically after a few minutes when on battery power). Worse yet, it doesn't accept phonecalls and smses anymore either..so it already crashed silently. Unfortunately you can't see this from the outside since the lights still flash. I only notice it crashed when trying to start the device.
I've updated to wm6 because I thought it was a wm5 issue, but it wouldn't help. I also updated to radio 1.13 (the orange radio stack as found on this site). But this too, didn't fix it.
does anybody else have the same problem?? This problem renders my whole device unuseful. =^(
thanks!
Reinier

Welcome to the club...looks like no solution on this one yet. Here is a link
http://forum.xda-developers.com/showthread.php?t=272938
Some say it might be incompatibility with the SD card, but not in my case.

Hi,
that doesn't sound too good.
Anyhow, I'll experiment with it some more (what else can one do?) to see what is making it crash more or less (wifi/sdcard/simcard/battery?)
I'll post my findings... maybe we can find some mutual thing which might be causing it
I doubt it is software related since my whole machine is wiped clean and has nothing on it
R

yes, me too...and it seems to get worst as time goes by...anyways, I suggest that if you have any warranty left to send it back for warranty. GOodluck!

thats a pretty good point... ;^)
I'll check.
too bad it's quite vague description:
yes, sometimes it doesn't powerup..
you can already see the technicians there... they try it 4 times, it works everytime (of course) , and they send it back with a sticker saying 'correct'
ah well.... lets not get ahead of time.
r

Solutn found...check your PM

Check battery charge level

hi, i didnĀ“t experienced that problem, but when i start up my device, sometimes, the start-up is really slow and the screen gets white but finally, i mena 2 or 3 secondsĀ“ time it becomes normal.
Is that what experienced?
clemsyn said:
Solutn found...check your PM
Click to expand...
Click to collapse
What do u mean with PM?
DId u get the solution?
See ya folks

Solution
Check you PM means check ur private messages
A fellow here with the same problems sent his device for repair and the problem was voltage control unit of mainboard
Solution:
1. Install Pocket Hack Master and go to settings and disable the CPU scaling of the device. Then set it to start at startup. Then clock your device at 312 mhz before turning off the device or closing the clamshell. You can always clock it to 520 while using cpu intensive applications. Just make sure to set it at 312 before turning it off.

thank you buddy

Jumanji1212
Did it also work for you? I forgot to add that I am also using an external charger specifically for Universal because Im afraid charging it via miniusb might mess up the voltage control unit more.

Well, i normally charge it with the ac/dc adaptor but not always. Since i deleted spb diary today plug-in and installed the latest qtek spanish rom and radio, the time of the white-screen shorten.

clemsyn said:
Check you PM means check ur private messages
A fellow here with the same problems sent his device for repair and the problem was voltage control unit of mainboard
Solution:
1. Install Pocket Hack Master and go to settings and disable the CPU scaling of the device. Then set it to start at startup. Then clock your device at 312 mhz before turning off the device or closing the clamshell. You can always clock it to 520 while using cpu intensive applications. Just make sure to set it at 312 before turning it off.
Click to expand...
Click to collapse
Hello, I have the same problem (Power button does not start after an auto sleep).
My qtek 9000 however gives a blank screen when playing with the PHM speed tests. (When it is plugged in it works.)
Now I am a little afraid to do the "set it to start at startup"
Is there no risk it will never startup anymore?
Can I do this (temporaly) just for testing without the auto startup option?
So: disable CPU scaling and set the speed on 312 and put it in sleep mode.
I need my Qtek so badly that I get horribly stressed with this kind of things.
Huib

Related

MDA Questions after a week of use...

Hello...
I recieved my MDA last saturday, and since then, have been trying to figure everything out. After multiple calls to tmobile, and even a trip back to the store, i'm still stuck with a few questions that i cannot seem to get answered.
1. The MDA came with the default Tmobile theme which works fine in portrait & in landscape, as well as the default blue Windows theme.
However, I have tried to install multiple themes(including some from microsoft themeselves) and i have one annoying error! Whenever I use an "installed" theme, the portrait screen looks fine, but when I open the keyboard...there are two large greyish/white gaps on the side of the theme.
Ex: I'm using a green theme. When in landscape mode, i have a single green square in the middle of the screen with a strip on either side(left or right)
2. My phone is HORRIBLY slow when and if ANYTHING 3rd party is installed. I've tried today plugins that control the memory usage(figured that would help)...however, it just slowed things done. My phone usually runs at about 14mb Free Program Memory, out of the total 44MB(This seems horrible...with just the default programs installed*for the most part* and maybe agile messenger running.). If i install a today plugin, or a game...this drops below 10mb. Therefore, phone usage can be very aggravating. I cannot think of any other way to increase this memory expect for ONE thing. Would it be possible to transfer ALL programs, applications, etc to the miniSD Card(i have 1gb now, with a 2gb in the mail). This way...i certaintly would not be topping out the usage of the card, and hopefully I can free up alot of space on the phone.
3. As we all know, the packaged IM programs are AWFULLY slow and inconsistent. After a bit of research and trials, I have settled on using Agile Messenger. I'm loving it...expect for a few things.
The MAJOR problem I have with it, is the pop up notification. Its annoying to be surfing the web or playing a game, just to have a pop up tell you that you have recieved a message, EVERY TIME you get a new message(which can amount to a great deal in a short time). I've looked all over for a setting, so unless I missed it, is there any way to shut this off?
A side issue with this program, and also the connectivity of the phone is...:
(even WITH the GPRS hack*always on*), I still lose connection(with 2-4 bars of signal) and therefore i get signed off of Agile, rather often. This isnt' such a problem with me, as seeing it takes a short time to log back in. However, when you look at the conversation from another person's point of view...all you see is
"Soandso" Logged off
"Soandso" logged on
etc
etc
(not sure if that last part was a question or a statement, but if theres an answer, i'd like to hear it!)
4.
My girlfriend has a sidekick, and I LOVE the feature of being able to set phone profiles for specific times of the day. Especially during school, it'll go silent, and the second we are out, its back on normal. I have downloaded PZP to try and fix this loss of luxury. However, I personally don't find the program to be very consistent. Sometimes, it seems as if say my "school" profile is fully functioning, while other times, it really doesnt. Call me crazy, but I have taken a shot in the dark and ventured to say that if one touches the volume button on the phone while the phone is on a specific profile...it will throw it out of its cycle. If anyone has some hints/comments/suggestions of their own on this program or other favorites...I would love to hear from you.
5. After I went about and downloaded the Eten dial pad skin, I noticed that all of my contacts were unable to receive contact photos. I quickly realized that any contact that was saved on my SIM card from my previous phone was stuck in this predictament. However, if i were to create a new contact account, it quickly allows me to customize them alot further. Therefore, i was curious if there was any way to transfer my contacts on my sim card>my phone in a fashion that the phone will accept them.
I'm sure i'll think of more questions(these are just the ones that I havent been able to answer after days of searching :-D)
Thank you so much in advance!!!!!!!!!!!!!!!!!!!
Hi,
the speed of the HTC Wizard is very slow. That was my problem too.
for question no. 2:
Moving the apps to the card will result in more free space on the phone, OK, but running the apps from the card will also result in low speed, because the card is slower than the main memory. So I think you won't get more speed by this.
Try to overclock the device with OmapClock. My device works like a charm with 264 MHz (original was 180 MHz).
Use a tool like FreeUp RAM, which is part of the SK-Tools-package.
Running OmapClock and freeing up the RAM from time to time brings significantly much more speed. There is almost no waiting time if you click on an icon. You can even run Skype with OmapClock (many other users do so).
HTH
I have seen tidbits about overclocking through my endless searches the last few days. I've always heard that you have to be careful if you overclock a device, such as a phone. Has anyone had any known issues with the overclocking? Are there risks in having the phone run at that speed all the time?
The Wizard isn't slow. Install a Qtek rom without branding, and it will be much faster.
even the sales associate at tmobile seemed to think it was slow. Upgrading to a different ROM sounds ok, but i'm trying to keep everything via tmobile. thaks for the tip though.
Hi,
Im looking to get the Tmobile USA MDA, but after reading posts like this Im alittle afraid.
I need to run TOMTOM on this device and thinking that this might bring the device to a halt. Now Im starting to think that maybe I should get the 6700. Please let me know what you found out about making MDA faster. Thank you.
TazMan1688 said:
I have seen tidbits about overclocking through my endless searches the last few days. I've always heard that you have to be careful if you overclock a device, such as a phone. Has anyone had any known issues with the overclocking? Are there risks in having the phone run at that speed all the time?
Click to expand...
Click to collapse
There have been long discussion about what is safe with the Wizard on this forum.
See, for example, http://forum.xda-developers.com/viewtopic.php?t=40284
Also, the SmartsKey app automates startup of OMapClock.
http://forum.xda-developers.com/viewtopic.php?t=41060
(It has a number of other uses as well.
Hope this helps.
TazMan1688 said:
My girlfriend has a sidekick, and I LOVE the feature of being able to set phone profiles for specific times of the day. Especially during school, it'll go silent, and the second we are out, its back on normal. I have downloaded PZP to try and fix this loss of luxury. However, I personally don't find the program to be very consistent. Sometimes, it seems as if say my "school" profile is fully functioning, while other times, it really doesnt. Call me crazy, but I have taken a shot in the dark and ventured to say that if one touches the volume button on the phone while the phone is on a specific profile...it will throw it out of its cycle. If anyone has some hints/comments/suggestions of their own on this program or other favorites...I would love to hear from you.
Click to expand...
Click to collapse
There is a known problem with backlighting. See http://zendrui.free.fr/PZPForum/viewtopic.php?t=197
Also, check to see what events PZP is handling for profile-switching. For example, if you have calendar-based or time-based rules, they may switch your profile without you doing anything. Go to Settings, Control to see what you Switches you allow. Or check Time and Calendar for your profiles under the Configuration option.
As much as i'm sure overclocking the device may help, especially in my case. I'm just not sure if its worth the risk. Kind of hard to explain to Tmobile why the phone decided to overheat. Seems overly risky to make such an expensive device, run at higher speeds than its DESIGNED to do. But i'm still not sure, it almost DOES seem worth it...decisions, decisions...
Yes, Thank you for clarifying that...I mostly meant, the inconsistency of PZP with the timing of profiles. It seems as if the program will "switch" to the correct profile, but i don't always see a change in the operation of the device itself. Ex: I have it set to go to school mode at 7:30am, this past week(since its spring break, i've noticed that my incoming calls all had the normal ring volume, as well as system tones, etc...
Although it "says" ""School"" i don't really know if its truely in that mode?!
On this note, i have a question about setting the times(which is what i really want to accomplish). My phone goes to LOUD around 5:30am, School at 7:30 am, Normal at 1:55pm, and Quiet at 4pm.
Nooow, do i have to put two times in the school profile such as 7:30 am-1:54(5)???? so that it has an entire time interval...or can i just tell it when to start, and the next profile will automatically kick in and stop the previous.
Also, does putting the phone in standby or shutting it down have any effect on the profile??
I'm sorry in advance if i'm asking very basic questions, i've just been searching for a long period of time, and i usually can't find a specific answer to my question. So I decided I would spend the time to actually discuss MY problem, with hope someone can help. Again, sorry for any inconvienence or redudant questions.
TazMan1688 said:
As much as i'm sure overclocking the device may help, especially in my case. I'm just not sure if its worth the risk. Kind of hard to explain to Tmobile why the phone decided to overheat.
Click to expand...
Click to collapse
I have a german T-Mobile MDA Vario (= HTC Wizard) and I'm overclocking it permanently with OmapClock and SmartSKey. There is no overheating as far as I can say/feel. I can speed up to 264 MHz (original = 180 MHz). If I try more, the device softresets itself without any damage or loss of data. It's a kind of security mechanism. Of course, battery life is a little bit shorter when overclocking it. But I'm sure, slightly overclocking doesn't damage the device! Maybe the lifetime of the device will be a bit shorter, lets say 6 months in 5 years, but you won't realize that, because you won't be using your device in 5 years. You will sure own some other phone when the CPU dies. Together with the tool "FreeUp RAM" (comes with SKTools), I can reach a comfortable speed for everyday use. But never forget: The Wizard IS quite slow, compared with other devices. You can find smart workarounds for that, but don't close your eyes on that fact.
For running any GPS navigation tools I would consider buying not a Wizard, but a much faster device, if you would ask me. I'm using my Wizard only for addresses (~ 700 items), calendar (~ 1200 items) etc., and without overclocking and using a program like Pocket Informant 2005, that would be an annoying, maybe impossible thing. At the beginning, I had to wait almost 10-15 seconds until e.g. the month overview was created. Switch to the following month - wait again. Choose a specific day - wait again. Oh my god! That needed more patience than I had.
Are you running a basic install without all the phone networks customisation bloat?
you can do this by hard resetting (you will loose data doing this) and then doing a softreset when the customisation dialogue pops up after setting time zone etc.
this will speed things up over an install with tmobiles bloatware. I run tomtom and my device is in general as reponsive as the magician it replaces.
good luck with your phone
R
So guys based on your opinions and experience is it worth for me to get the MDA or should I go with a different carrier and a XV/PPC-6700 ?
Hi yozh,
I don't know the 6700-device at all. Maybe we don't have it here in good old Germany, or maybe under a differnt name. Does it have a bigger display (better for navigation)? Does it have a faster CPU? Then take that one! In my eyes I would never like to use the Wizard for navigation. It's only a better phone, not more, not less. For all other purposes I would buy a bigger machine. I do not want to talk bad about my own device, I have bought it and I use it and it's OK for the everyday things I do with it. It has nothing to do with "I'm proud of my device", like some people seem to be here. It's a phone, man, not a Ferrari or a Rolex. You would tell yourself lies, if you would call the Wizard a powerful device. I had a Palm Tungsten T5 before, and THIS is a powerful device. 2600 items in the calendar (true!), and the reaction time was half a second if you tap on the screen! You can go and have a coffee if you do that on a Wizard.
Just think about it. If you buy a Wizard, try it for a day and then write to me what you think about that phone.
Mh. My english should be better, I know.
Just my 2 Cents!
Hi well the 6700 is the apache I belive and the CPU is 416mhz but its not a "dual core" everything else screen adn such is pretty much the same. Thanks for the reply
SO any one on this forums can recoment apache over MDA ?
yozh said:
Hi,
Im looking to get the Tmobile USA MDA, but after reading posts like this Im alittle afraid.
I need to run TOMTOM on this device and thinking that this might bring the device to a halt. Now Im starting to think that maybe I should get the 6700. Please let me know what you found out about making MDA faster. Thank you.
Click to expand...
Click to collapse
See my posts on http://forum.xda-developers.com/viewtopic.php?t=48448 regarding processor speeds and TomTom.
Wow really TOMTOM runs better on the MDA then on a 400mhz DELL ? Then Im set defenatly getting the MDA, I like GSM network provide3rs better anyway and plus there are so much choices with the phones. I wish I was able to aford the JASJAS that looks really good.
Also don't forget that when you 'close' an appliation it does not really close, it just goes in to background, thus slowing the system down.
Check out your running processes and close all the ones that are not needed or load an app that really closed things.
TazMan1688 said:
1. The MDA came with the default Tmobile theme which works fine in portrait & in landscape, as well as the default blue Windows theme.
However, I have tried to install multiple themes(including some from microsoft themeselves) and i have one annoying error! Whenever I use an "installed" theme, the portrait screen looks fine, but when I open the keyboard...there are two large greyish/white gaps on the side of the theme.
Click to expand...
Click to collapse
Themes built for portrait screens look wrong in landscape view. Easy solution: build a theme that works in landscape view. The Guava Bubbles theme works fine in both because the background image is larger than portrait size.
TazMan1688 said:
4. My girlfriend has a sidekick, and I LOVE the feature of being able to set phone profiles for specific times of the day. Especially during school, it'll go silent, and the second we are out, its back on normal. I have downloaded PZP to try and fix this loss of luxury. However, I personally don't find the program to be very consistent. Sometimes, it seems as if say my "school" profile is fully functioning, while other times, it really doesnt. Call me crazy, but I have taken a shot in the dark and ventured to say that if one touches the volume button on the phone while the phone is on a specific profile...it will throw it out of its cycle. If anyone has some hints/comments/suggestions of their own on this program or other favorites...I would love to hear from you.
Click to expand...
Click to collapse
I use PPC-Profiles-Pro, but you can't slave this to a time. Besides, I'd rather just put it on Silent mode by holding the connection manager button for three seconds (top left side button). Otherwise I use PPC Profiles to switch from Work (BT) to Home (Wifi, no BT) to Sleep (No Wifi, no BT, no email alerts or reminders, just ringer). Walking into a theater, I just go to silent mode.
bilbo_28 said:
Also don't forget that when you 'close' an appliation it does not really close, it just goes in to background, thus slowing the system down.
Click to expand...
Click to collapse
I know. I'm using MagicButton. And OmapClock with SmartSKey. And FreeUp RAM. In deed, I do almost EVERYTHING to make my device run faster.

Loosing the will to live!

Hi Guys
Been having the usual "Turn on" problem with my TyTN since having it, you know, very occasionaly - maybe once a week - you try to turn it from the button on the side and it wont. No matter what you do it stays off and you have to soft-reset.
Well, over the past few weeks its been getting MUCH worse. Im now resorting to rebooting the phone maybe 8 or 9 times a day! I have tried various diferent ROMS and the same issue keeps occuring. I've also checked the ROMS threads to see if anyone else has had this problem as severe as me and they haven't.
I REALLY like my TyTN and don't want to be forced into buying a new phone with the Ultimates just down the roads.
Any ideas???
Thanks in advance!
-------------------
Current build (remember, tried with a few diferent ROMS):
Crossbow Prof
CE OS 5.2.1236 (build 17741.0.2.1) = LVSW build
ROM: 3.30.0.1
Date: 17/4/07
Radio:1.41.00.10
Proto: 32.74.7020.18H
Monty Burns said:
Hi Guys
Been having the usual "Turn on" problem with my TyTN since having it, you know, very occasionaly - maybe once a week - you try to turn it from the button on the side and it wont. No matter what you do it stays off and you have to soft-reset.
Well, over the past few weeks its been getting MUCH worse. Im now resorting to rebooting the phone maybe 8 or 9 times a day! I have tried various diferent ROMS and the same issue keeps occuring. I've also checked the ROMS threads to see if anyone else has had this problem as severe as me and they haven't.
I REALLY like my TyTN and don't want to be forced into buying a new phone with the Ultimates just down the roads.
Any ideas???
Thanks in advance!
-------------------
Current build (remember, tried with a few diferent ROMS):
Crossbow Prof
CE OS 5.2.1236 (build 17741.0.2.1) = LVSW build
ROM: 3.30.0.1
Date: 17/4/07
Radio:1.41.00.10
Proto: 32.74.7020.18H
Click to expand...
Click to collapse
The problem is you have told us nothing about what is running whether you leave it to sleep by itself what's on the today plugins whether you have active sync turned off (ie set to manual) etc etc etc and which of the freezing fixes you have tried. Whether your plugins are on sd card whether it freezes with sd card not inserted etc etc.
Mike
right o' ... get your laughing gear round this
I let it "sleep" itself.
Im running:
Activesync (Exchange push mail - no pattern discovered with regards to receiving new emails)
SPB Weather (Today plugin)
Everything else is standard.
Connecting over 3g/HSDPA
There are other apps installed but these are always "closed" after being used. All apps are installed to the phone memory and not SD card - i've never tried without the card, guess I will try this now! Although, if this is the problem, how do I get around it???? I need my card.
Monty Burns said:
right o' ... get your laughing gear round this
I let it "sleep" itself.
Im running:
Activesync (Exchange push mail - no pattern discovered with regards to receiving new emails)
SPB Weather (Today plugin)
Everything else is standard.
Connecting over 3g/HSDPA
There are other apps installed but these are always "closed" after being used. All apps are installed to the phone memory and not SD card - i've never tried without the card, guess I will try this now! Although, if this is the problem, how do I get around it???? I need my card.
Click to expand...
Click to collapse
Well I can see why you kept those things secret. If someone asked me to compile a list of things more or less guaranteed to cause freezing and refusal to turn on, I think I'd give 'em a link to your setup!!
If you must have push mail (that requires active sync to be active) and weather applications then you will likely continue to have problems.
You may be able to reduce the number of them by NOT allowing device to sleep by itself. I have mine set to never sleep. However I do always use the on/off button when finished.
It's fine to have applications that require connection to internet and today plugins on main memory BUT others should be on SD card. The reason is that running low on main memory (and not even that low!) can cause freezing.
PIE can rack up loads of storage memory - can move storage to card.
Regularly run a third party clean out application.
Mike
PS. resisted the urge to get my laughing gear out. Think I was in shock actually. You could consider writing a "how not to setup your Hermes" guide.
mikechannon said:
Well I can see why you kept those things secret. If someone asked me to compile a list of things more or less guaranteed to cause freezing and refusal to turn on, I think I'd give 'em a link to your setup!!
If you must have push mail (that requires active sync to be active) and weather applications then you will likely continue to have problems.
Click to expand...
Click to collapse
Why would these apps cause it to lock up? One comes with the operating system and one connects to the net once a day. Surley Outlook can't be that unstable as to cause lockups on average every two hours. I doubt SPB Weather is that unstable as well!
Yes, I must have push email. Why waste battery power polling every thirty minutes or so with pull email?
The memory card is going back in. I took it out, went to Sainsburys and BAM its locked again
I will now try the "no auto sleep" thing and see how that goes so thanks for that suggestion.
i had problems like these with my Tytn and eventually upgraded to WM6 (Black 2.5). It really made a difference. Much faster, never freezes and battery life is better.
Severe fix I know but worth considering
mikechannon said:
.....You may be able to reduce the number of them by NOT allowing device to sleep by itself. I have mine set to never sleep. However I do always use the on/off button when finished. .......
Click to expand...
Click to collapse
TOTALLY agree with you there Mike. I was having some real issues with the "coma" effect once the device has automatically gone into sleep mode, this wa admittedly on the original HTC ROM, and was caused by pocketzenphone however since I have (without fail) set the device to NEVER switch off automatically and have got into the good habit of using the on/off button liberally.
warmkiwi99 said:
i had problems like these with my Tytn and eventually upgraded to WM6 (Black 2.5). It really made a difference. Much faster, never freezes and battery life is better.
Severe fix I know but worth considering
Click to expand...
Click to collapse
See my orginial post Crossbow
It has! Sadly though it was still "sleeping".
However, i have taken it out of auto sleep and put it to manual, guess what .... been a couple of hours now and NO lockup! Yay!
Monty Burns said:
Why would these apps cause it to lock up? One comes with the operating system and one connects to the net once a day. Surley Outlook can't be that unstable as to cause lockups on average every two hours. I doubt SPB Weather is that unstable as well!
Yes, I must have push email. Why waste battery power polling every thirty minutes or so with pull email?
The memory card is going back in. I took it out, went to Sainsburys and BAM its locked again
I will now try the "no auto sleep" thing and see how that goes so thanks for that suggestion.
Click to expand...
Click to collapse
Even official applications are not immune from problems. The Hermes perhaps for some configurational reasons (though it's not just Hermes)does not like running active sync from sleep mode and it does not like running other applications that require syncing (eg. weather type ones).
Active Sync is not a particularly stable app and combine this with the Hermes weakness when being allowed to sleep by itself and you end up with a lock-up. (I have seen some explanations for this but only guess work and theories)
Many people have set their devices up to run active sync in manual mode only and this does help to reduce freezing. Of course you cannot do this with push mail enabled. (It might be possible to run some script or a scheduler programme to start and stop Active sync at set times - though the complexities here are as likely to cause a freeze as anything else!!
I am pleased your SD card seems not to be the cause - it can be for some.
I see you are possibly getting some benefit from a manual shut down rather than auto sleep
You may find the odd other idea on my site - freezing/lockups:
http://michael-channon.spaces.live.com
There is a thread here somewhere but i'd need to search for the thread.
You could also try doing without the weather app for a test. However you may not see a difference as active sync is already running for the mail.
Mike
Monty Burns said:
See my orginial post Crossbow
Click to expand...
Click to collapse
Sorry, didn't notice that......
Hi Mike
Turning off the auto sleep thingy has worked a treat. I'm down to one reboot a day now and that has been related to t-mobiles 3g network failure collapse me thinks
So this tip alone is worth its weight in gold!
SPB Weather is running and so is Activesync/push email.
Also now added today plugins:
RhinoStats (CPU/memory monitor - realtime)
RhinoLaunch (custom program launcher)
All seems pukka and "coma" free
Good news, pleased things have improved.
Of course I suppose we could all agree auto sleep should not cause the device to go into a "coma", but still, I've got used to just using the on/off button. Curiously this has improved my battery life as I turn off as soon as I finish, rather than waiting for it to turn itself off (which it won't anyway as I disabled that mode).
Mike
Monty Burns said:
right o' ... get your laughing gear round this
I let it "sleep" itself.
Im running:
Activesync (Exchange push mail - no pattern discovered with regards to receiving new emails)
SPB Weather (Today plugin)
Everything else is standard.
Connecting over 3g/HSDPA
There are other apps installed but these are always "closed" after being used. All apps are installed to the phone memory and not SD card - i've never tried without the card, guess I will try this now! Although, if this is the problem, how do I get around it???? I need my card.
Click to expand...
Click to collapse
I'll share my experience so that maybe it will help. I use WM6 on my 8525 and have found the "unable to wake" problem to be related to my SPB Mobile Shell. When I have the phone set to display SPB Mobile Shell's "Now Screen" upon wakeup, it quite often will not wake. But if I manually put the phone to "sleep" mode, then it will always pop alive fine. Disabling the Now Screen all together leaves me no problem. My guess is maybe it's an SPB issue. So maybe SPB Weather is causing it. I used to use SPB Weather before Mobile Shell, but since Shell has weather built in, I don't need SBP Weather any longer.
Hope this helps diagnose the problem a bit. For the record, I never had a wakeup problem with WM5.
Since going to black 2.5 and then 3.0 I have not had any of the sleep issues.
I run SPB Weather which is set to update every 5 hours, I run activesync to the exchange server which checks emails every 2 hours. My phone auto-offs after 3 minutes.
I did have AS set to When it arrives - but found this to be bad for battery and also stability. Every ten minutes was fine when I needed more urgency. All programs are installed to the phone, exept pie cache and outlook attachments which are on the card. I have not done any special tricks to avoid any sleep/card problems.

Random SoftResets... ?? :(

To start, I'm terribly sorry if this is a cross thread and the question has already been answered, but i couldn't find it...
Anyway. I'm using my Wizard w/ WM5 IPL\SPL 2.25 and AKU 3.3. And it likes to RESTART/SOFTRESET it's self randomly. I have not a clue what to trace this back to... It did it on WM6, so i went down to WM5 for multiple reasons, one, to see if it fixed the reset issue... It still does it, but not near as much as it did w/ WM6..
I use batterystatus, and i do over clock, and i overclock a little lower than what most people OC to. I OC to 247 w/ CPUSCALER on at 143~195~247 ~ 260 Boost. My temps are pretty low. Spiking sometimes at like 32C and maybe in the sun and heat it goes higher than 35. otherwise i usually see an average of about 28 or 29C constantly. Drain is always between 50~250 mA and 219~1200 mV (i'm not sure what the high is on the mV reading...)
But anyway. The thing just resets it self for no apparent reason. Theres nothing i'm doing to induce it. I'll simply open my keyboard and then try and respond to a text (that i'm now getting with WM5, i hope the missing text/call issue w/ WM6 will be resolved soon. :] ), or i'll set my phone down on my desk, and then try and wake it up by tapping the power switch, but it's off..
So I don't know. I don't to bore you guys w/ information. But if there's anything else I can let you know to help solve the mystery, please ask.
A little extra:
If this means anything. Today I had to make a trip to the local AT&T store... My SIM was fried.. I'd turn my phone on and it said "Invalid or Missing SIM." So i was stumped. I Turned it off, put in a friends chip, and it worked, i even got one of her texts.. I call up 611 to see if i could go to the store and get a new chip, and yes i could. I ran down to the ATNT store and got my self a new chip and now my phone works again, with yet less Softresets... So idk if this has anything to do w/ the issue. If the old SIM was shorting or something.. i have no clue....
AHHHHHHHH. Thanks.
edit: whatever, got a warranty exchange.

What makes PDA Hang?

Hi. i want to ask. what makes PDA hang?
I am currently using Atom Life.
And sometimes it hang. and i have to take out the battery and turn it on again. which is very troublesome and makes some of my sms gone as well.
it sometimes occurs when i turn it on. it also hangs there.
can anybody advice me on this?
thanks.
T3D0nG said:
Hi. i want to ask. what makes PDA hang?
I am currently using Atom Life.
And sometimes it hang. and i have to take out the battery and turn it on again. which is very troublesome and makes some of my sms gone as well.
it sometimes occurs when i turn it on. it also hangs there.
can anybody advice me on this?
thanks.
Click to expand...
Click to collapse
lol,
good question
the buggy Os makes it hang.
a Rom upgrade should solve the problem.
shaileshashar said:
lol,
good question
the buggy Os makes it hang.
a Rom upgrade should solve the problem.
Click to expand...
Click to collapse
however, i updated to the latest rom already. how is it? does RAM affect?
T300,
There are lots of things that can make your pda hang, probably too many to go into. I will try and give you the principal areas you need to address, which come from my own experience coupled to tons of reading on here.
1) Activesync - This has a habit of running all the time and is a prime cause of lockups. Use the fake server solution to solve that problem (search on here for it using google search. I will give you the google search link in a minute).
2) Software incompatibilities - You need to make absolutely sure that if you are running WM6, your apps are the latest version capable of running under WM6. I have had a lot of problems trying to run WM5 apps under WM6.
3) Battery and power locks - Make sure that all system locks are disabled. For example you can set your system to turn of the LCD screen or power of after a period of time. Make sure all of these are inactive/not set. If you want to turn your screen off then lighty touch your power switch and it will do the job for you. Touch it again and your pda springs into life; simple. You can use the device lock option on the today screen if you need to lock your screen with the pda on; no problems with this option.
4) Programmes running in the background - I strongly suggest that you set your pda to completely close down any programmes after you have run them, rather than minimise. Use the task manager option to sort this out or install the htc x-button app (search on here for that also).
5) Beams and Wifi - Make sure these are turned off unless you need to use them. Switch them off as soon as you have finished with them. Benefits are improved battery life and less freezes.
6) Inappropriate themes - Not all themes work happily with WM6. Some do lock up your machine. Keep it simple; load a standard WM6 theme that you know works and leave it at that.
There's more, but this should give you something to work on. I will add to this post as I remember other things.
Let us know how you get on. Google search for XA is:
http://www.google.com/advanced_search?q=+site:http://forum.xda-developers.com&hl=en&lr=&as_qdr=all
Cheers
WB

overclocking

what is the highest that the wing can be overclocked and what would be the best program to do so?
rastlin said:
what is the highest that the wing can be overclocked and what would be the best program to do so?
Click to expand...
Click to collapse
You are prob going to be slammed with 'use the search feature', but, I'm bored as hell at work, so I thought I'd help.
You will find many people use different speeds, and different programs. The two I've used are batterystatus and Omap. Personally, I like batterystatus, and I've safely clocked mine to 299mhz.
BatteryStatus? Isn't that way old?
I highly recommend HomeScreen Plus Plus (which is the new version of Battery Status) just google it and you'll find it and download the Advanced verson not the Basic one.
And I safely overclock it to 299 with no problems. I went to 312 once but every so often the phone would rest itself.
HS++ is also good cause it auto underclocks and auto overclocks your device so when your phone is sleeping it saves battery .
buru898 said:
BatteryStatus? Isn't that way old?
I highly recommend HomeScreen Plus Plus (which is the new version of Battery Status) just google it and you'll find it and download the Advanced verson not the Basic one.
And I safely overclock it to 299 with no problems. I went to 312 once but every so often the phone would rest itself.
HS++ is also good cause it auto underclocks and auto overclocks your device so when your phone is sleeping it saves battery .
Click to expand...
Click to collapse
+1000000 this is awesome man! thanks
i want to thank everyone that had responded i did a little research and i was confused. ya see i am using batterystatus .04 and if i go above 260 my phone freezes and to be quite frank i had 2 wizards that i believe died from overclocking. they both one day randomly after a reset went to the bootloader screen and stayed. i had tried a hard reset and flashing the unit with no luck personally i dont have a clue what happened and with this one being my only source of 'net access i cannot mess it over once again thank everyone whom responded
-rastlin
Hmm wow I'm sorry for your Wizard but the Wings can go up to 299mhz without dying and the good thing about HS++ is that if you enable CPU Scaler and set the overclock to say... like 400 and your phone freezes, just plug in your charger and reset your phone. The CPU Scaler is disabled as long as you have a power cord plugged in your phone (your phone stays on it's native speed) so you can just go back into the CPU Scaler overclock settings and lower it and try again ^_^!!
So just use the CPU Scaler to find the highest overclock speed but never just set the overclock speed in the normal overclock menu. Use the CPU Scaler auto overclock option and you won't need to hard reset your phone.
thanks for the advice. so it is possible to kill a unit with overclocking i just wanted to be sure, cause when i asked in the wizard forms if i am not mistaken no one answered me. i had also asked hct via a number provided to me by tmobile and they said the stock "i dunno we will have to look at the unit and that will be $180" towhich i responded f**k!! that i can get a new unit for under 130 off of ebay then got a wing....
-rastlin

Categories

Resources