Where to find right replacement Mini-B Usb? - 8125, K-JAM, P4300, MDA Vario General

Hi,
My mini-B usb female connector (for charging and usb connectivity etc) is broken...
I need to find a replacement,
but I don't know what model it's exactly..
I don't what to end up ordering something I can't use :]
Can anyone help me?
Thanks!

What is the Make/Model of your phone. Either you can send it to the original manufacturer/vendor if still under warranty or you can order from ebay.First know the maker and model No # of your phone like T-mobile,cingular,i-mate or At&tt etc and model like T-mobile MDA,vario, etc etc,ok
Cheers !

I have mine from www.techcenter.fr

It's an HTC Wizard, Wiza200. (Qtek in fact)

Looking for a replacement USB port for your Apache or Wizard?
Go to:
http://www.mouser.com/catalog/629/979.pdf
You're looking for "D" in the pic's (Mouser Stock No. 538-67503-1020)
I have purchased them, they fit perfectly!
Good luck

bioChaz-
My USB connector is broken as well. Have you replaced one yourself? I want to know how hard it would be to do, because I'm thinking of ordering the part and attempting it.

what about ppc techs. they repair and sell that part.

I've done it a bunch of times...it definitely takes a few trys before u get it right...if ur familiar w/ soldering then it should be fairly easy, but if not...it might be worth paying some one to do it for u...if the pads are ripped from the motherboard then they have to be retraced...that is even harder...then it is worth paying to have it fixed for sure...otherwise, there is always the upgrade

upgrade? i wish. bought mine off the streets. thanks

bioChazTBO said:
Looking for a replacement USB port for your Apache or Wizard?
Go to:
http://www.mouser.com/catalog/629/979.pdf
You're looking for "D" in the pic's (Mouser Stock No. 538-67503-1020)
I have purchased them, they fit perfectly!
Good luck
Click to expand...
Click to collapse
I knew I'd be able to get this part from DigiKey/Mouser, but I was just never sure which was the right one so I never bothered.
Thanks!

Related

Repair / Replacement help

I have an xda exec, which i have had for over a year now and i have been very happy with it... until a couple of weeks ago the mini usb port detached itself from the mainboard :-( Ive read about it happening before on here... but i have no warranty now so im looking for anyone who can help. The mini USB port is also now damaged. I looked at re-soldering it back on but im not good enough to do that... I guess ideally im after another universal with a broken screen or something so as i can make one good one from 2 bad... and then save up a little more towards an athena...
Pocketpctechs will repaire it for $60(including parts &larbor)
Check out the links bellow
http://www.pocketpctechs.com/main~sessid~560175586~unit~O2_XDA_Exec-500~area~repairs.htm
Thanks for the link - really useful... im contacting them to see if they can supply a replacement mainboard to the UK as that is where im based, if not i can look at posting it over i guess... Many Thanks - Dave
i brought a stand alone charger that you pop your battery in! pain in the ass but if you have two batterys its all good then use bluetooth to sync and install your apps and files im in the UK too
Yeah, thats exactly what i have done in the short term... but after upgrading my old XDA IIs yesterday to Windows Mobile 6 i fancy seeing what sort of improvements are available for my Universal.
On a side question can you sync over wifi?
you used to be able to but there was security concerns so they removed it from activesync if you have an old copy of active syncc then yes...

mini usb plug spare needed

Help, the mini usb port (plug) in my tilt has broken, and I cannot connect the phone to my pc. I am living in Venezuela where this phone is not in the market, and I cannot find the spare part. Who can tell me where can I buy one?
thanks for the help
Here is a service to fix it however it requires you to mail your phone to them. Its USD $79.00 and that includes parts and labor.
http://www.pocketpctechs.com/main~u...Kaiser+Sync+Connector+Replacement+Service.htm
Thanks a lot i wrote them tring to buy only the spare part since it is a trouble to me sending the phone to USA.
If anyone else can give to me further addresses I will apreciate it.

USB connector broken..

Hi all,
my Athena fell down while charging (kiddies.....) - now it seems to me that the connector is broken somehow. I can't chrage the device anymore and don't get contact to my PC anymore.
Warranty exchange isn't possible due to customized ROM. What can I do ?
Dieter
PPC Techs repaired my HTC Universal when the USB connector broke, give them a try:
http://www.ppctechs.com/HTC-Advantage_895/repairs.htm
Thanks galt,
but seems to me a little bit far away.....
Would prefere a source to buy spares and do it by myself or have a repair service in Germany or even Europe...
Dieter
Sorry, I forgot to check your location... HTC might have a repair center in Europe...
dieterpapa said:
Thanks galt,
but seems to me a little bit far away.....
Would prefere a source to buy spares and do it by myself or have a repair service in Germany or even Europe...
Dieter
Click to expand...
Click to collapse
i don't know how it works with "The Phone warehouse" but here in the uk their parent company Carphone Warehouse have usually a flat fee for repairs, maybe ask The Phone Warehouse what they might charge ?
I think you can open and try to solder usb pin on your own.
its should not be that difficult task.
I have done this with my Motoming
Hello,
have already opened the device. Sadly it's not only a standard USB connector but a special HTC connector with about 10 connections...it's nearly impossible to re-solder
Dieter
But I'll ask phone warehouse in UK.
dieterpapa said:
Hello,
have already opened the device. Sadly it's not only a standard USB connector but a special HTC connector with about 10 connections...it's nearly impossible to re-solder
Dieter
But I'll ask phone warehouse in UK.
Click to expand...
Click to collapse
do it if you can as if you solder wrong pins than there would be a problem
and word impossible itself says i m possibles
Bad luck
dieterpapa said:
Hi all,
my Athena fell down while charging (kiddies.....) - now it seems to me that the connector is broken somehow. I can't chrage the device anymore and don't get contact to my PC anymore.
Warranty exchange isn't possible due to customized ROM. What can I do ?
Dieter
Click to expand...
Click to collapse
As a temp setup, why not get a docking base. they normally have a battery charging on them too. Keep you going until you find a repairer. they come up on ebay
Jay
.......Or THIS even?

new usb cable??? help

ok i have a uk vodafone htc magic with google branding
i broke my usb cable and can't find a replacement
before people start to say
use this one that one other one
it it a unique connection so satnav psp ect cables WILL NOT FIT
looking on ebay they all look like the wrongones
so any idea
please delete cause i'm a idiot
it works lol

[Q] Long time usb mystery solved

ok so i have be having trouble connecting my phone via usb to the computer. After 6 months of this problem and reading multiple solutions online i decided to replace my usb port for a second time thinking it was a defective port. Turns out their is a transistor on the back side of where the usb ribbon connects to the motherboard which looks to be damaged. Anyone know of a place where i could get this repaired. I'm in CT but any trust worth places would be appreciated.
I would recommend looking into this place. They untucked abd unlocked the gsm on my note 2. Very nice, very helpful. http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-note-3-jtag-brick-repair/
combined Delpfro
talonzme said:
I would recommend looking into this place. They untucked abd unlocked the gsm on my note 2. Very nice, very helpful. http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-note-3-jtag-brick-repair/
Click to expand...
Click to collapse
Thank you sir the site looks legit. Thank you for your speedy reply.
No problem. They treated me right.

Categories

Resources