can i install a dialer skin for IM+ skype from shapeservices.com????
i want to make calls w/ that program and i would like to be able to dial out.
two other things. How can i make a link in contacts, so i can choose to dial out via the skype in shapeservices, or normal phone.
the last is i want a shortuct on my desktop to that special dialer for shape services...
i was thinkin bout this because then i could use area for contacts Have link to dial out via the skype program in shape services (because it dials via incoming calls not over VOIP) and on one of my softkeys i could like it to the dialer for the shapeservices skype program. That way i can click the green button on my phone to dial normal phone, the left softkey to dial shapeservices Skype, and my right softkey either the PCM contacts (if that is easier modded) or the original contacts (doesnt matter to me.)... anything>?
is there at least anotther program that works in the way IM+ Skype works. how you dial a skype # and it goes over the phonelines as an incoming call, that way you get full call quality as well as, since i have unlimitd incoming minutes, then i get unlimited talkin!
any other program that does this, where i can do what i want mentioned in the posts above?
bumpz it up to the top
anybody w/ any concpet lin k this
I don't know why but reading your post makes my head hurt...
I still don't know what you're asking for... so all I can suggest is, have you tried Fring?
im talkin about basically could i get a dialer skin for skype IM+
anybody?? i mean i could then put a bookmark in params to go directly to the dialer skin>????
Related
Hi
I have an XDA2i and a leadtek BT GPS working together well, But Have only just got the XDA2i and want to use it for navigation and as a phone!
incoming call seem to work ok TTN5 mutes I talk on my Plantonics BT headset end call unmutes...
Making a call seem difficult while driving as there is no voice dialling running and searching contacts is difficult to see and operate!
How do others do this? Is there a dial that will display the contact list on double clicking the headset that uses a big font?
has anyone tried a headset with call display an directory browsing such as BT800#? if so do they work with the XDA2I
Any advice or help appreciated as at the moment I can't see me getting rid of my other phone!
i use Phoneplus. works great on my i-mate... http://www.pocketgear.com/software_detail.asp?id=13354
Thanks, I will give it a go.
I also use phoneplus3 but you can also create POI with phone numbers for all the important numbers like home, work and friends then you can call them directly from within TTN5 via the 'call number' button in main menu 3 of 3.
I also use phoneplus3 but you can also create POI with phone numbers for all the important numbers like home, work and friends then you can call them directly from within TTN5 via the 'call number' button in main menu 3 of 3.
Thanks, I have already added numbers to TTN5. I found and like pecaller, unfurtunatly it has a number of bugs like not remebering the groups etc.
So I'm using phonepluse but if they get the bugs fixed I would switch to pecaller and its free!
Thanks
Adrian
Adrian,
You may try VITO Voice2Go for voice dialing or VITO QuickContact for finding contacts and calling with joystick (one-hand operation program, no stylus).
http://vitotechnology.com/en/products/voice2go.html
http://vitotechnology.com/en/products/quickcontact.html
Thanks I will take a look.
ok well im on sprint, and i have unlimited incoming mintues. Ive been trying out IM+ skype from shape services, they have an interesting skype system. I dial out a contact, it routes the number, then an incoming call comes to me, when i answer the call, it dials out to the person i want to call. This effectively, allows me to make skype calls to anyone, in the USA and Canada, unlimited. That way i can have unlimited calling whenever i want, using this idea....
What i want to know is that i have lots of contacts and i dont want to import contacts to skype and my phone. When i used to use the normal skype over my 3G connection, the sound quality was terrible but when i wanted to dial out i had an option to dial either Skype or phone. I tried EQO, which allowed me to dial via EQO or normal... I was wondering is there anyway i can put my contacts in my typical contacts, and when i want to dial, i can have the option to either dial through skype (the shape services method), or dial normally??? I dont care if i use the shape services, i personally hate the UI, but it does what i want it to do?? What i can i do to accomplish my idea. I dont care if there is another IM client i can use (i really dont like the shape one anyway,) or if there is a mod i can do to my contacts list, or a special contacts program i can use, to decide how i dial????
bump it up,.. i know there has to be a solution
Whipped up a program here that should allow you to automatically dial from your GV number. The only catch is, I don't have my account switched over yet, so I cant try it myself. You need to install 1 file, then use the program to apply the Google Voice settings. If this program works, please let me know, as well as let me know the optimal values for pause1 and pause2 (will have to experiment a little). To then dial via GV, right click (click-hold) the person in the contacts list and select Dial with Calling Card.
For Windows Mobile Pro, version 5.0 or later
.net 2.0 or greater required
-------
CAB File
[Link Removed]
------
Google Voice Dialer Settings Program:
[Link Removed]
-----
Install Instructions:
1. Install CAB
2. Apply Settings via GVD
3. Reboot
EDIT: It should be noted, pause 1 is the pause between the call and the auto-entering 2, pause 2 is the pause before entering the number. 0 will wait for the send key, and each number after that is aprx 2 seconds. So a 4 would be 8 seconds (4 *2).
techhead89 said:
Whipped up a program here that should allow you to automatically dial from your GV number.
Click to expand...
Click to collapse
What is it exactly?? voice dialing and google?
I just upgrade my Grandcentral today..I'll give this a try and report back....Do I juss need to install the cab or also grab the exe?
edit: just read directions directly below lol I shall report back soon..so glad they added sms
doesn't seem to be work? I install the cab apply the settings (add my number and 1 for each of the other fields) and soft reset. use file explorer to open calling card folder and click on only icon (CallingCard.dll) avail I get the message: There is no application associated with "CallingCard". Run the application first, then open this file from within the application. any help? Something missing in the cab? though I'm far from the expert here
using Raph 800 stock rom if that helps any
tgkdubb said:
doesn't seem to be work? I install the cab apply the settings (add my number and 1 for each of the other fields) and soft reset. use file explorer to open calling card folder and click on only icon (CallingCard.dll) avail I get the message: There is no application associated with "CallingCard". Run the application first, then open this file from within the application. any help? Something missing in the cab? though I'm far from the expert here
using Raph 800 stock rom if that helps any
Click to expand...
Click to collapse
To make calls you have to right click (click-hold) the person in your contacts menu. Think of this as an "extention" to your Contacts application.
S.V.I said:
What is it exactly?? voice dialing and google?
Click to expand...
Click to collapse
The idea is, to make a call with your Google Voice showing in the caller ID, you gotta call GV first, then call out. This allows quick and easy integration.
Another note: If you had a plan from a certain carrier that allowed unlimited calling to one number, theoretically this would enable unlimited anytime calling, anywhere. Just throwing that out there...
I love the concept, but I'm not sure about the implementation. I don't use the default poutlook contacts app, I run pocket informant. Will this add the calling card menu there?
Any chance of making the calling card dial the default option, so that all calls (including calls dialed using the keypad, rather than contacts app) would route this way?
ETA: Just confirmed, this does not work with pocket informant.
gai-jin said:
I love the concept, but I'm not sure about the implementation. I don't use the default poutlook contacts app, I run pocket informant. Will this add the calling card menu there?
Any chance of making the calling card dial the default option, so that all calls (including calls dialed using the keypad, rather than contacts app) would route this way?
ETA: Just confirmed, this does not work with pocket informant.
Click to expand...
Click to collapse
The reason for doing this is to mainly test and see if this approach will work with Google Voice (cant try it myself yet, waiting for feedback). The implementation currently is, like you said, less than optimal, but was the quickest and easiest I could get. I didn't want to wrap up a lot of time if this dosen't work. Can you check, and if it does let me know the minimal values that work for the pauses? I intend to leave this option out on the future versions.
techhead89 said:
The reason for doing this is to mainly test and see if this approach will work with Google Voice (cant try it myself yet, waiting for feedback). The implementation currently is, like you said, less than optimal, but was the quickest and easiest I could get. I didn't want to wrap up a lot of time if this dosen't work. Can you check, and if it does let me know the minimal values that work for the pauses? I intend to leave this option out on the future versions.
Click to expand...
Click to collapse
Sure, I'll just disable PI temporarily so I can use the default contacts app. Give me a few.
Ended up having to uninstall PI, I couldn't find the setting to change the shortcuts back to default with it still installed. Oh well.
Pause of 1 in both instances works fine, actually seems like it could be shorter, but of course 0 doesn't work that way.
You need to insert a # after the contact phone number is dialed. Right now it just sits there and I have to push # manually. (Or wait several seconds and then it goes through without the #)
The Touchtones when dialing the contact number are also probably a bit slower than necessary, but I'm not sure you can change that.
This program plus iDialer make a good combo for dialing out. GVD covers contact lists, and iDialer covers manual dialing.
oooohhh ok...so I just tried it and it calls sprint 411? - Scratch that had to input my number with the GVD tool again...
tgkdubb said:
oooohhh ok...so I just tried it and it calls sprint 411?
Click to expand...
Click to collapse
You put in your Google Voice number in the GVD tool?
When you try to make a call, what number shows up in the phone app as the number it's dialing?
gai-jin said:
You put in your Google Voice number in the GVD tool?
When you try to make a call, what number shows up in the phone app as the number it's dialing?
Click to expand...
Click to collapse
it's showing my GV number now...sometimes it calls like it's checking my messages....and sometimes I can hear it get all the way to the prompt where its asking for the number to dial...then once it attempts to autodial it says the number is invalid....I think I need to play with the pause settings. ok while typing this I've had success...my settings were 1 then 2
1 and 1 worked smoothly for me on several tries. I wonder why 1 and 2 would be needed on yours, the 2nd pause really should be the same across all phones/networks I would think.
Did you press pound manually after the touch tones for the phone number were done?
gai-jin said:
You need to insert a # after the contact phone number is dialed. Right now it just sits there and I have to push # manually. (Or wait several seconds and then it goes through without the #)
Click to expand...
Click to collapse
Second this. Can you modify the program to insert # at the end?
btw, It works pretty good on my TP with pause 1 & 1. Thank you.
outphase said:
This program plus iDialer make a good combo for dialing out. GVD covers contact lists, and iDialer covers manual dialing.
Click to expand...
Click to collapse
As far as I know iDialer doesn't work with google voice (atleast version 0.42).
What do you mean by manual dialing? Do you mean dial GV number + 2 + and actual number?
Ok guys, still working on adding in the #, as well as some other modifications. It's kinda hard working blind, but I hope to have something new here soon. Its also kinda hard doing this coding in VB, when I've never really studied it at all. Language similarity ftw.
techhead89 said:
Ok guys, still working on adding in the #, as well as some other modifications. It's kinda hard working blind, but I hope to have something new here soon. Its also kinda hard doing this coding in VB, when I've never really studied it at all. Language similarity ftw.
Click to expand...
Click to collapse
Thank you. Once you post new cab I'll test it.
I've downloaded the latest fring windows mobile cab and installed it, but when I launch it - nothing happens.
I'm trying to get my google voice to integrate with my phone.
I have a Gizmo account and using Nimbuzz, I can dial out from
voice.google.com and talk over my TP2, but I can't use for instance iDialer to call out. I did set up my gizmo/google voice callbacks for iDialer.
I can't answer incoming calls over nimbuzz either, I answer but cant press 1 to accept the call
edit: disabled the "confirmation" on google voice but now it just keeps ringing even after answering?
I'm using Energy Leo WM6.5.3 ROM
Any help would be much appreciated!!
edit:
Been looking at why it wont work all morning, some say HTC Messaging, some say Sense 2.5, some say it flat out won't work with Energy Leo... o.0
bump.
i cant call out via idialer, i can dial out via gv web interface.
i cant answer incoming calls, only dialed out calls
my incoming sound isnt friendly except speakerphone (bluetooth/earpiece/headset i cant hear, but the other person can hear me)
edit:
got my SIP set up in the registry for WM InternetCalling, just need some codecs now and i need to test iDialer more.
Hi guys, I've just moved over from iphone so still finding my feet with android.
For the most part android is far superior but the contact side of things is still bugging me. This is what I want to be able to do:
1. Have my call log as calls only, not texts. I know you can change this to view calls received, dialled etc, but it soons defaults back and shows everything. I just want my log to have dialled and received and nothing else? I'm sure i've read somewhere on the net that this was possible on the SGS through a hack??
2. I want to set up a favourites list of say best mate, gf, work etc and just be able to press their name and it dials there number, not opens another window that shows history, text option, dial option video call option, i.e. just direct dial. I also would like this to be the first screen that opens when I press my phone icon on the dock??
I've set my gf up on my desktop as a direct dial shortcut, but I don't want to be doing that for everyone. I've got a load of contacts but maybe only dial 10 at most on a regular basis.
are there any hacks or thrid party dialers that do this??
Cheers
Lee
landerson07 said:
Hi guys, I've just moved over from iphone so still finding my feet with android.
For the most part android is far superior but the contact side of things is still bugging me. This is what I want to be able to do:
1. Have my call log as calls only, not texts. I know you can change this to view calls received, dialled etc, but it soons defaults back and shows everything. I just want my log to have dialled and received and nothing else? I'm sure i've read somewhere on the net that this was possible on the SGS through a hack??
2. I want to set up a favourites list of say best mate, gf, work etc and just be able to press their name and it dials there number, not opens another window that shows history, text option, dial option video call option, i.e. just direct dial. I also would like this to be the first screen that opens when I press my phone icon on the dock??
I've set my gf up on my desktop as a direct dial shortcut, but I don't want to be doing that for everyone. I've got a load of contacts but maybe only dial 10 at most on a regular basis.
are there any hacks or thrid party dialers that do this??
Cheers
Lee
Click to expand...
Click to collapse
I can help you with #2. Just swipe right on your favorite and you call that favorite immediately. Swipe left to immediately send a message.
landerson07 said:
Hi guys, I've just moved over from iphone so still finding my feet with android.
For the most part android is far superior but the contact side of things is still bugging me. This is what I want to be able to do:
1. Have my call log as calls only, not texts. I know you can change this to view calls received, dialled etc, but it soons defaults back and shows everything. I just want my log to have dialled and received and nothing else? I'm sure i've read somewhere on the net that this was possible on the SGS through a hack??
2. I want to set up a favourites list of say best mate, gf, work etc and just be able to press their name and it dials there number, not opens another window that shows history, text option, dial option video call option, i.e. just direct dial. I also would like this to be the first screen that opens when I press my phone icon on the dock??
I've set my gf up on my desktop as a direct dial shortcut, but I don't want to be doing that for everyone. I've got a load of contacts but maybe only dial 10 at most on a regular basis.
are there any hacks or thrid party dialers that do this??
Cheers
Lee
Click to expand...
Click to collapse
hmmm, can't say i can see a way around No.1, other than using a new dialer/contacts app such as Go Contacts or Dialer One etc..
must say, i actually quite like the comprehensive log, coming from Sense and Stock roms with calls only, i like having it all in one place...
Dialer One would be my choice, but only as i used it on CM7 on my Hero for its smart dial feature... can't comment on Go Contacts
hope this helps
Dickie
I use loads off texts a day so within 10 mins of dialling someone their details are long gone
I'll check out Go Contacts and Dialer One though, thanks for the recommendations
This is a Samsung thing, regular android does not put texts with the call log. I don't think I'd like them to be combined like that.
it is the right thing to do
RogerPodacter said:
This is a Samsung thing, regular android does not put texts with the call log. I don't think I'd like them to be combined like that.
Click to expand...
Click to collapse
I like them combined. There again, there could be an option to control it.
Go Contacts is just the ticket
Thanks guys, much better now