Hi everyone, I've been looking for a good sock to slip on my phone but have had no luck so far. What I'm interested in is one that's made from a cotton lycra type blend.
Here are some pics of the type of fabric I'm looking for.. if someone can help me find one that fits over the kaiser, I'd really appreciate it.
no one has any links or ideas for me?
@ericc191
Check out this thread...in particular post #2 by pof. The tilt is just a bit smaller than the 8525, but it should work.
http://forum.xda-developers.com/showthread.php?t=273546&highlight=ipod+sock
thanks.. i'll look into them. If i get one ill also make sure to snip off that silly tag
I have had great luck using Ipod socks, which you can pick up at walmart, or the apple store....
ericc191 said:
Hi everyone, I've been looking for a good sock to slip on my phone but have had no luck so far. What I'm interested in is one that's made from a cotton lycra type blend.
Here are some pics of the type of fabric I'm looking for.. if someone can help me find one that fits over the kaiser, I'd really appreciate it.
Click to expand...
Click to collapse
Why? Am I missing something here? Why would you want a fabric bag for yer spendy phone? No protection really.... Dunno why you would ponder such a thing.
kpcdotcom said:
I have had great luck using Ipod socks, which you can pick up at walmart, or the apple store....
Click to expand...
Click to collapse
u mean the old ipod 4G (ipod foto) socks?
Nick Collision said:
Why? Am I missing something here? Why would you want a fabric bag for yer spendy phone? No protection really.... Dunno why you would ponder such a thing.
Click to expand...
Click to collapse
uh it's actually pretty decent protection and fits fine in my jeans pocket. period.
Related
Hey, I'm about to buy a new bag for my Hermes. I have to choose between the two Golla bags.
Desert:
or Dawn:
Do you think the Hermes will fit in the Dawn bag?
Tell me your opinion
take care,
m00h
Ok, the Desert is like it was made for Hermes
take care,
m00h
Does this bag have a belt clip on the back ?
hrmm that Golla one aint bad, the other one looks a little pansy with the flowers/butterflies on it.
Where in the US
Anybody know where one can buy this Golla Desert Bag in the US ?
tagger99 said:
Does this bag have a belt clip on the back ?
Click to expand...
Click to collapse
Yes, it does. Maybe you can find it at eBay if you're lucky.
take care,
m00h
Thanks, I'll check Ebay then
Has anyone ran into anyplace where you can purchase the HTC Raph back shell cover?
I heard it isn't as glossy/fingerprint magnet as the Euro version.. more rubberized.
www.cnn.cn doesn't have anything listed, not even a TP.
take a piece of sandpaper and remove that shine.
jeffla said:
take a piece of sandpaper and remove that shine.
Click to expand...
Click to collapse
LOL....funny i'm thinking of that too...but lucky my HTC back cover is rubberized..........
Sorry forgot to mentioned mine HTC is asian model...
What?! I want a rubberized back...
Will be nice to have. I am sure they will come out with replacements soon.
http://www.expansys-usa.com has a few with batteries.
This does not look right.... http://www.expansys-usa.com/p.aspx?i=166210
F2a said:
This does not look right.... http://www.expansys-usa.com/p.aspx?i=166210
Click to expand...
Click to collapse
It's exactly what it says it is. A battery cover. A pouch for an extra battery.
F2a said:
This does not look right.... http://www.expansys-usa.com/p.aspx?i=166210
Click to expand...
Click to collapse
yeah, i kept on running into that an just kept on going wtf?
jeffla said:
take a piece of sandpaper and remove that shine.
Click to expand...
Click to collapse
That'll work, however, I think I'll stick with the rubberized one
bfspider said:
yeah, i kept on running into that an just kept on going wtf?
Click to expand...
Click to collapse
Oops... Seems they reused the same stock image for the P3300's battery cover.
http://www.expansys-usa.com/p.aspx?i=143016
Still, $33 is a lot of money for rubberized plastic, especially if I'm not even 100% certain it'll fit. And I want to see an accurate picture before I plunk money down.
My TP has rubberized back. Bought in Norway.
bfspider said:
Has anyone ran into anyplace where you can purchase the HTC Raph back shell cover?
I heard it isn't as glossy/fingerprint magnet as the Euro version.. more rubberized.
www.cnn.cn doesn't have anything listed, not even a TP.
Click to expand...
Click to collapse
My Touch pro is completly rubberised, no shine or gloss at all on the back and it's the EU model, bought in the UK
l0st.prophet said:
My Touch pro is completly rubberised, no shine or gloss at all on the back and it's the EU model, bought in the UK
Click to expand...
Click to collapse
haha!
I forgot to mention that I have the Fuze
All that someone needs to do is see if the European Touch Pro cover fits the US AT&T Fuze.
Doesn't anyone have access to both phones to test this???
(Interesting...This is my first post and I've been a member since April 2006....I'm always in here reading and I just never thought to ask anything before...weird because I post all the time over at HoFo).
if someone has a dremel tool, maybe u can fine sand it, and leave the triangle that says HTC and around the camera/flash untouched, make a rectangle shape around the autofocus text, then take it to the mall to one of those dog tag kiosk that can itch your name or logo on the back like laser itch, i think that will look cool...
while ur at it itch ur e-mail/contact info on the inside of the cover in case it gets lost!!
maister said:
My TP has rubberized back. Bought in Norway.
Click to expand...
Click to collapse
can you post a pic of that?
has anyone ran into anything yet?
Found This case on ebay, think i can just use the back part on my fuse?
I saw the one on ebay too, but how come there is a big triangular hole where the camera is? How are you supposed to cover that or is it just left open?
I believe they want you to transfer it from your existing hardware... But, with my luck I would screw it up and not have a battery cover at all.
Yes, YAKST(Yet another kickstand thread), but I have searched the forums and nobosy has done this.
I recently purchased a dummy HTC Evo from ebay for 20 bucks(a), now the idea here is to take this thing apart and extract the kickstand assembly(b) from it and pry it on an HD2 rubberized case(c), and hopefully it'll look something like(HTCEVOHD2.jpg).
I'm going to buy some tools to get this done, I'm thinking a dremel type tool and a glue gun... any ideas are welcomed!
I will be using the instructions found here: http://www.ifixit.com/Guide/Repair/Installing-HTC-Evo-4G-Kickstand/3064/4
Will post actual pictures of the mod, maybe a youtube video... Check back soon, as I am impatient and will try to get this done in the next few days...
dalethefarmer said:
I will be using the instructions found here: http://www.ifixit.com/Guide/Repair/Installing-HTC-Evo-4G-Kickstand/3064/4
Will post actual pictures of the mod, maybe a youtube video... Check back soon, as I am impatient and will try to get this done in the next few days...
Click to expand...
Click to collapse
I dont think the back of the Evo would work on the hd2 led flash are on different sides
josemedina1983 said:
I dont think the back of the Evo would work on the hd2 led flash are on different sides
Click to expand...
Click to collapse
I'm only using the kickstand assembly which can be detached, nothing else.
Well... Maybe the logo, if I can get it off...
cant wait to see how this comes out! good luck dude
itsedstech said:
cant wait to see how this comes out! good luck dude
Click to expand...
Click to collapse
Hey thanks... I did not anticipate how thick the kickstand assembly is, now I know why the Evo is a mini fridge... I need to get a tool to cut the rubberize case with precision, does anybody have any ideas what i should get?
dalethefarmer said:
Yes, YAKST(Yet another kickstand thread), but I have searched the forums and nobosy has done this.
I recently purchased a dummy HTC Evo from ebay for 20 bucks(a), now the idea here is to take this thing apart and extract the kickstand assembly(b) from it and pry it on an HD2 rubberized case(c), and hopefully it'll look something like(HTCEVOHD2.jpg).
I'm going to buy some tools to get this done, I'm thinking a dremel type tool and a glue gun... any ideas are welcomed!
Click to expand...
Click to collapse
yes, if you like to modify, hack, and customize stuff to your liking, then a dremel is definitely a tool you would like to have
Hey any luck with this? i'd like to see what the results were. thinking about doing the same thing to my incredible that already has extended battery with tpu case as back cover
This is very interesting. If you guys are looking for a stand take a look at my signature.
clever, nice idea - I'm gonna give that one a go!
Sry about the size...I used paint to remove stuff from the brower pic
Haha +1
FINALLY a phone that does the ONE feature I AlWAYS want it to do!
LOL no doubt
seems painful lol all that plastic and glass, do you have to buy an extra port for it?
elegantai said:
seems painful lol all that plastic and glass, do you have to buy an extra port for it?
Click to expand...
Click to collapse
Lol ya know, they have a "device" that hooks up to iPods and uses the beat of the music to...well you get the hint..And I do believe its for ladies only..
God some of the strange articles on comes across while bored on the interwebz
I have been looking for a silicone skin case for my TF300T that would allow me to still use the keyboard dock without having to take the case off. Has any one seen one? or could any one give me a link to one?
This is the one im ordering. It looks awesome and comes in lots of colors. It is synthetic leather though...I haven't found any silicones that work w/the case. Lemme know if you do!
http://www.amazon.com/gp/product/B007XL3YP2/ref=ox_sc_act_title_2?ie=UTF8&smid=A1NOY9EOR8TXD6
thatisandwas said:
This is the one im ordering. It looks awesome and comes in lots of colors. It is synthetic leather though...I haven't found any silicones that work w/the case. Lemme know if you do!
http://www.amazon.com/gp/product/B007XL3YP2/ref=ox_sc_act_title_2?ie=UTF8&smid=A1NOY9EOR8TXD6
Click to expand...
Click to collapse
Nice, this case looks awesome. I am probably going to order the carbon fiber version
http://www.amazon.com/Transformer-P...1343742158&sr=8-11&keywords=HHI+Keyboard+Case
Have you received the case yet? is it nice?
brittan said:
I have been looking for a silicone skin case for my TF300T that would allow me to still use the keyboard dock without having to take the case off. Has any one seen one? or could any one give me a link to one?
Click to expand...
Click to collapse
The Bob J cases were designed to be convertible, check out the thread in accessories for his site.
Dredz said:
The Bob J cases were designed to be convertible, check out the thread in accessories for his site.
Click to expand...
Click to collapse
This is exactly what i was looking for. Thanks!