Related
Hi all
First this is a really good forum to learn things
Ok , see my problem
I ve unlock my Wizard(orange) ,works fine... (htc wizard)
Ive play with registry key (stupid things), and later when I ve done a soft reset Itl display the bootloader some version of radio .... but nothing more .... the screen stay like this.
So I ve try hardware reset , and it display band of color(like rainbow) with isd & ils version . I dont have any other confirmation (stay like this till Ive done softreset)
So anyone have idea to boot my qtek, thanks for you help
My first message,my first problem :?
How do you do the hard reset ?
This way : http://forum.xda-developers.com/viewtopic.php?p=182354 ?
Thanks for you support
In fact Ive read the wrong method for hardware reset
Now is back again to normal mode
I will like to replace my French rom by a K-JAM rom
anyone done this and can we set the keybord to ansy
thanks anyway ...
Hello all,
I have a problem with my Atom. After performing a soft reset or a hard reset device can't boot up, it stack on "O2" image. To open again the device i have to take out the battery. And this doesn't work with the first time.I have to take out the battery many times. I've updated it with the latest firmware, but i have again the same issue.
Please help me!!
If it won't boot up at all and you have the option of returning it, you might consider that. If you fiddle around with it in this state and you do something that would void your warranty on an already non working device it would be a shame. On the other hand if you have already messed upgrading roms and the like check the forums there must be a way to boot into a bootloader on the Atom and a way to restore it from a backup (I have a Wizard so I'm not too familiar with the Atom, but I'm pretty sure there must be a way to restore it). Remember though if you still have the option return it and get another one. Hope your able to fix this, good luck.
Unfortunately i don't have the option to return it because i bought it used from another person. And if i had the option to do this, it's a little tricky because i live in Greece and it must be returned to Hong Kong!
In that case check the forums there should be some info around there. If I see anything, I'll be sure to let you know.
boot up after a soft reset
Hi there
I faced the same problem and i managed to fix it by booting to bootloader mode and reinstalling the rom.
If you asking how to boot to bootloader mode just press SR button+Cmera
Good luck
masr1979 thank you for your interest!
ZaZuRaZ thanks for the reply! I'll give it a try and i'll post any feedback!
ZaZuRaZ i did what you said, but the problem is still there.
i duno if this will help but i had the same problem before. the thing was when i performed a soft reset it was too quick, thats why the atom froze on the o2 screen. i read the manual and it says you have to press and hold it, so everytime i do a soft reset i hold it for 2 seconds (let the o2 screen flash twice before releasing it) and it should be in off state. works fine now with about 90+ soft resets.
I had same problem... In my case it was from third party software - Softic card export. HR help me solve this problem.
I have the same problem at least 2 times and HR won't even save it. (Take out the battery doesn't work for me either)
Like ZaZuRaZ, I fixed it by booting the Atom in the bootloader mode and re-install the rom.
Isn't that HR should bring the macine to manufacture setting and I really don't understand why HR can't save the machine !!! :evil:
Mine is on the way to Hong Kong for comatose condition :twisted:
I sold my Atom because of this problem.
Now i found one Atom-it's amazing device, maybe the best ppc now-but i'm stuck if i'll buy it or not. I don't want pay too much € again, and still got the same problems.
Dammit, i don't know what to do.
hey...whats the SR button for bootload?
please help i have the t-mobile mda compact pm200 and i was removing a cracked version on pocket dos v1.09 from the remove list and it said windows wil need to perform a soft rest yes or cancel i clicked yes and my system restarted but now it just get stuck at the t-mobile screen. i have tried doing the manufatures hard reset but no joy i have take out the battery no joy and i can't even access it through my p.c what can i do to get it up and running again i don't care about the data already on there cuz it is all backed up on my sd cad
When you took out your battery, have you been waiting til the backup battery fully drained out? It takes about 30-60 minutes, better leave a few hours. Try this and post your results...
thank for trying but unfrtunatly it had no effect i tried for two hours then reinserrted it and no joy so i waited a further day but still nothing any other ideas tnx
Is it getting into BootLoader? Then you might try Flashing a new ROM!
how would i go about doing that? my computer won't even recognis3e my phone
I had about the same problem:
I was trying to install the Pocket PC Greek language support (free trial version) from the site http://greek.pocket-pc.penreader.co...der_Greek.html. on my MDA Vario Tmobile when it crashed!! It shows just a white screen and does nothing at all!! I soft and hard reseted the device but after restarting it shows the Tmobile screen and after a few seconds a white screen! Actually I am not so sure that the device is hard reseting because it doesn't ask me for a confirmation of the hard reset. When I startup my device it stops on the same white screen.No windows loading, no other commands accepting, not recognized by my desktop.
Did anybody have the same problem before? Does anybody know how can i get my PPC on working condition again
Thanks dagonist.
I hope somebody can help....
See for ROM upgrades on the forum :wink: if u get some images on the mini then it's not dead! It's just stuck at the bootloader mode, meaning that the OS is somehow damaged.. To solve this prob u must plug the mini into the pc (it will be recognised as an unidentified device, don't worry), then download a ROM upgrade set (u will find these on the net or in the xda-dev ftp). Execute the prog, wait 'till it finished and voila! Ur device will come as new If u encounter problem do a simple search in the forum regards rom - bootloader - upgrade and u willl find a lot of infos :wink:
Hope this helps, MocciJ
Thanks MocciJ.....but my desktop pc doesnot "see" my pocket pc at all!!
:? then it isn't yet in bootloader, is just stuck at the beginning of a broken OS! I mean that it tries to load the OS, but then it gets stopped since he read bad ROM (probably deleted in some way since u encountered this prob removing a prog) try to get it in bootloader mode, by pressing together the camera, power and reset buttons.. U will lose all the things in the RAM memory, but in this case u really can't do anything else.. After entering in bootloader, u can easily upgrade it..
MocciJ
Well, I just tried the camera button+power button+reset button....and nothing happens! It reset and comes back to the same white screen...
Any other suggestions??
well, did u tried to make it correctly? I mean: for entering boot loader u havce to press camera + power, and then reset (with camera and power pressed) if u can't still enter the bootloader, then I'm out of ideas, sorry...
MocciJ
I amdoing it write but nothing happens....
In the screen what can u read? If u read serial (it is barely visible) then see if it turn to usb when u connect the cable: if yes, we 're at a very good point...
When it starts up it shows the Tmobile logo and then for a few seconds :
ipl 1.08
spl 1.08
gsm 01.09.10
(something else...)
after a few seconds a white screen without any letters or anything else.
But I cannot see it anywhere on my desktop pc...
:? I can't figure out how you can get it back.. If it displays images and text, then the bootloader is still alive.. It even tells u the correct version of the complete ROM.. but I wonder why it can't access to the bootloader.. u must search in the forum how to reach the bootloader, but I'm sure of the power camera reset combination; when u can read SERIAL or even better USB on the device, u probably have solved most of ur problems, but chances are that u have even bad clusters of ROM, and cannot be restored with an upgrade (it happened to the External Rom of my mini after a bad upgrade)
I suggest to send it to repairs, before doing somewhat wrong, because if there is an original ROM inside they will repair it for sure, free :wink:
MocciJ
Thanks. The problem is that I got the phone from ebay, from a UK seller, and it was locked to Tmobile. So I don't think that I can ask for a factory/guaranty repair....
Thanks. The problem is that I got the phone from ebay, from a UK seller, and it was locked to Tmobile. So I don't think that I can ask for a factory/warranty repair....
seee i tried all of thoose things but i found the main problem was getting the computer to recoginise the thing and the program i put on was a cracked version ( i know i am a naughty boy) so if i send it off they could cause legal problems couldn't it
it depends on what u are meaning by "not recognised" but I assume that windows dosesn't even try to recognise the device (I mean that there aren't bubbles, notifications, or any other changes on the system) for the cracked software, well if u have installed it right into any RAM folder (not in the storage memory) then u can tell the repairing center that ur unit simply doesn't power on correctly.. :wink:
MocciJ
Hello, I have put my pda hw6910 in test mode, on the screen:
SERIAL
HP
VG.39
And now not as(like) extracting it, I have tried an erased(smeared) general but nothing, it(he,she) returns again(afresh): (some help?
On the hw6915 I leaved serial mode through "hard reset" (Red_Phone+Green_Phone+On/Off+Reset)
-varix-
Already I have tried(meant) it and it does not work
please help, dont work hard reset, CLEANING OK, and enter serial
help please,
Fix
Hi put the ppc in the base and execute the program uni_exitbootloader
dont work any solution?
just reflash
reflash your device (it can be done in test mode too...)
umph.. if you do not have nbf files then it could be difficult...
is vodafone uk ipaq 6910, in hp dont have flash for vodafone ipaq, and the vodafone page, Neither.
in hp i have the hw6910 but for free ipaq, not for vodafone, and say error in ID
heeeelp
Why not just call HP support? Just hang up some lame story that it 'just' happened.
Unless the phone is stolen, this shouldn't be a problem, and if it is, you don't deserve to be helpen .
Thanks
Wow, I really love this forum. I always find the solution here.
Getting out of the bootload screen worked:
(vchumacero)
Fix
Hi put the ppc in the base and execute the program uni_exitbootloader
vchumacero is the best
vchumacero
thanks man , you made my phone work again , thanks thanks thanks
you are realy expert bro
HP 6910 problem
screem hp
logo hp
vG. 39
i make reset hard and reset soft, not start
download uni_exitbootloader
problem not conneted usb
please help me!!!!
Is any can made hw6910 to WM6.1 or 6.5```
I have exhausted all local failed to find!
Any one help`
thanks!
deadlock1981 said:
Why not just call HP support? Just hang up some lame story that it 'just' happened.
Unless the phone is stolen, this shouldn't be a problem, and if it is, you don't deserve to be helpen .
Click to expand...
Click to collapse
wow this was very helpful for me. i did just what you told me and BAM! it worked! thanks
- its one thing to be stupid, its another thing to spread it
Hi Guys,
so here's the deal.
My Herald doesent work propably.
I can switch it on, it boots till the welcome Screen of WM6. Everything that happens then is that the annoying WM "busy Circle" is spinning, and the phone LED starts flashing, and thats it.
I can turn on an off the screen with the power button.
BUT if I take the sim out of the Device AND the MicoSD Card, everything works well.
But thats not the real deal I guess. Fortunately I still have warrenty but I want to make shure that it is not a simple problem I could fix myselfe.
THX Guys
just perform a Hard Reset and your problems will be solved
if u dont know, look in WIKI section
Thx for your Answer but unfortunatley it's not that easy.. I already performed a harware reset.. and I already treid to play a new rom on the device but it diesent work because the desktop pc can't connect the device via activesync.. The desktop doesn#t evene recognize the device..
a) well, you have to provide us some data.. turn off phone, hold camera+reset with the stylus and tell the numbers that r shown on ur herald screen
b) have u tried to flash via memory card?? can work
c) press power to set-standby mode. Then plug usbcable and hit power, device will "revive usb" and activesync should detect it. And go to Settings > Connection > disable advanced USB mode..
Nettzwerg said:
Hi Guys,
so here's the deal.
My Herald doesent work propably.
I can switch it on, it boots till the welcome Screen of WM6. Everything that happens then is that the annoying WM "busy Circle" is spinning, and the phone LED starts flashing, and thats it.
I can turn on an off the screen with the power button.
BUT if I take the sim out of the Device AND the MicoSD Card, everything works well.
But thats not the real deal I guess. Fortunately I still have warrenty but I want to make shure that it is not a simple problem I could fix myselfe.
THX Guys
Click to expand...
Click to collapse
This is just a shot in the dark, but have you tried someone else's sim card in your phone with out the micro sd in it? My phone started to act up, and it turned out the sim card was bad.
@ tramuyo:
Thx for your reply.. I did what you suggested, and well: BIG MAGIC happend
No just kidding.. I'm not that into PPC to know theses special tricks.
But well here is some data:
IPL 4.17.0001
SPL 4.17.0000
I have absolutly no idea how this may help but i'm pretty confident that everyone here is more an expert than me... ;-) I just use these Toys..*G
And no I did not flash via sd car.. I just used the original WM6 Flash tool provided by HTC, and that works via activesync as fare as i know.
@dougstoner:
Also Thxs for your reply but the sim works. I testet it on another phone. I wish it would be as easy
UPDATE:
Removing SIM and SD Card -> Device boots...
Rom Flashed with originial HTC WM6 -> Devie workes WITH SIM and SD Card
After several reboots for test purposes -> same problem as before... AND problem is still there when using just one card..SIM or SD Card and even when using no card...
i think ur problem is microSD card. reformat in another computer and try with your mobile
btw,
congratulations!
I already did that.. With no longing effect...
I guess I really should send the device to HTC, and say bye bye for at last 3 weeks...
And why congratulations tramuyo? Because I got that thing runnig with the help of the HTC Support
oh no.. sorry, i understand you have done it (i dont understand too good english language)
But we can give some support to avoid send it to htc