Advice needed - JASJAR, XDA Exec, MDA Pro General

Very new to this,I have a Qtek 9000 on 3 network,Upgraded it to wm6 using file from here,But its a bit unstable & i would like to know the best wm6 to use on this.
Also is there any way ok not installing Skype as i will never use it & it just takes up space.
I have on it now
Rom version 2.12.00 WWE
Radio V1.15.00
Protocol V45.51.00
ext Rom V2.12.07 WWE
Thanx

Related

Which is a recent / suitable ROM and Radio upgrade for QTEK

Hello folks,
QTEK 1010 bought from Dubai
Model PW10A1
ROM version 3.16.52 ENG
ROM Date 03/10/03
Radio version 3.19.01
Protocol version 32S54
My questions: -
For me, which is a suitable upgrade...
From www.myxda.com:-
ROM version 3.20.06
Radio version 4.21
OR
From www.carrierdevices.com.au:-
CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe]
Thanks
Faisal
Re: Which is a recent / suitable ROM and Radio upgrade for Q
faisal said:
Hello folks,
QTEK 1010 bought from Dubai
Model PW10A1
ROM version 3.16.52 ENG
ROM Date 03/10/03
Radio version 3.19.01
Protocol version 32S54
My questions: -
For me, which is a suitable upgrade...
From www.myxda.com:-
ROM version 3.20.06
Radio version 4.21
OR
From www.carrierdevices.com.au:-
CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe]
Thanks
Faisal
Click to expand...
Click to collapse
You may use any ROM Updgrade, you may even want to cook your own ROM, but please do not think of performing a radio stack upgrade if your present radio is working well and giving you a trouble free service.
Hi guys,
I 'm in same situation but with higher versions, and can hardly wait to get a new 2003 ROM.
I can't just play with my XDA as I use it all the time for work and it's pretty stable so far. I just also can't tell that the ROM is 'totally' separate from the RUU in WM2003.
So the question is: is there any one here who has gone through a 2003 upgrade for Qtek 1010 to tell us his thoughts after the upgrade ?
I read a lot about the stability of 4.00.16 ENG, but all been written was for O2 R4.21 or T-Mobile R6.xx. Did any one in this region (Mid East) with R 3.2x went into this upgrade ? and what is the current status ?
Thanx all ....
Latest ...
I tried upgrading to 4.00.11 ENG from the kitchen ... no matter how many trys it just restarts and gives the same error message "Can't open USB/com port ..." ...
Do I miss anything ??
more update ...
Tried to cook the new ROM as .nb1 file and used Xdatools from the kitchen to flash my device .... same result :? :evil:
Is it possible that there is a ROM protection on my XDA ??? :shock:
Biso007 said:
more update ...
Tried to cook the new ROM as .nb1 file and used Xdatools from the kitchen to flash my device .... same result :? :evil:
Is it possible that there is a ROM protection on my XDA ??? :shock:
Click to expand...
Click to collapse
Hi Biso007,
Look at the IDIOTS GUIDE at:
http://www.xda-developers.com/forum/viewtopic.php?t=3171
and follow the instructions thoroughly one by one and you can't go wrong, it did work for me, I was in the same situation.
Samohile - Thanks. It is good advice to not mess with the radio if you can help it.
My only problem is that my device periodically shuts off. Then pressing the power button soft boots it. I cant tell for sure but it seems that this happens after an incoming or missed call. It seems that other friends using ROM 3.18.04 and Radio 3.25.01 (like our friend biso007 here) seem to have very stable systems.
I can try upgrading the ROM only and see what happens but the information at www.carrierdevices.com seems to imply that both ought to be upgraded at the same time. I notice it is an Australian site. Does that matter? Also, the version of the radio upgrade is a bit confusing, at least from its name. (Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe] ). I wonder what this RSUv1.15 translates into since the name of the exe file for the ROM is nicely descriptive of the version (3.18.04).
Any advice in this would be very welcome..
Well i am using WM2003 4.00.11 and its working fine for me no problem i cooked in the kitchen you just need to read arround this great forum for a whgile on topics such as upgrades and ROM to know exactly what you are dealing with and then you will able to upgrade smoothly.
:wink:
Hi ARZLEB
I read lots and lots about upgrade lessons but none of them worked for me .... I got an advice to use SD card with bootloader as it's the only working way. Now I wonder why the EXE method was created!!
I see that u got the 4.00.11 working. Did u upgrade it using EXE or SD card. Any help would be so appreciated ... thnx
Well i used the EXE methode the file i cooked in the Kitchen but i didnt change the version i left as 3 at the bottom of the page it works fine i upgraded from 3.XX to 4.XX then i downgraded from 4.00.11 to 4.00.05 then upgraded again all using EXE format so far working great.
i will be honest with you i know about the SD methode very well but never tried it so u have to make more search on this issue.
If you need anything more plz message me anytime and i will be more then whilling to help you step by step...
faisal said:
Samohile - Thanks. It is good advice to not mess with the radio if you can help it.
My only problem is that my device periodically shuts off. Then pressing the power button soft boots it. I cant tell for sure but it seems that this happens after an incoming or missed call. It seems that other friends using ROM 3.18.04 and Radio 3.25.01 (like our friend biso007 here) seem to have very stable systems.
I can try upgrading the ROM only and see what happens but the information at www.carrierdevices.com seems to imply that both ought to be upgraded at the same time. I notice it is an Australian site. Does that matter? Also, the version of the radio upgrade is a bit confusing, at least from its name. (Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe] ). I wonder what this RSUv1.15 translates into since the name of the exe file for the ROM is nicely descriptive of the version (3.18.04).
Any advice in this would be very welcome..
Click to expand...
Click to collapse
Faisal sorry for very late reply.
I have flashed my Qtek (bought in Abu Dhabi) with several versions of roms cooked in kitchens (Jeff's and Stefans's), but I have finally settled with ATT release wm2003 Siemens SX56 upgrade. It comes with most of the bugs fixed (except multiple reset bug) and is quite stable. I almost never have to reset it. You can flash the ROM only by SD card method though. You can try it. It's always a good idea to flash using SD card method. USB method using ProgramA is not very safe. I guess the network in Pakistan is compatible with the one in the UAE, so you can safely use it, if you don't mess up with the Radio Stack. My Radio is 3.23.01 and I have no problems with that.

New iMate Jam ROM

i-mate have posted a new firmware today
Device Support - ROM Upgrade for i-mate JAM
This page contains the latest Operating Systems for the i-mate JAM device. Future releases of the software will be posted on this page for i-mate customers, so keep it bookmarked!
We currently have the following ROM images available and may be used to upgrade earlier devices. All languages will soon be available as:
Rom version 1.11.00
Radio version 1.11.00
(New!) ExtROM version 1.11.132 (WWE)
(New!) ExtROM version 1.11.183 (Arabic)
(New!) ExtROM version 1.11.169 (North American 850-only model)
(New!) ExtROM version 1.11.179 (UK)
(New!) ExtROM version 1.11.182 (French)
Fixes:
ROM builds with radio versions 1.05.00 and 1.10.00 all include audio enhancements for voice calls. Radio build 1.11.00 includes improved support for Cell Broadcast and SIM Toolkit applications.
All new builds contain the improved camera driver and fix for "No Bluetooth Hardware" bug. ROM builds 1.11.00 also includes a new MMS client for improved network compatability and an upgrade to the Operating System.
The North American 850 build includes support for more T-Mobile SIM subscriptions. These settings are all available as separate operator CAB settings files for download from this site.
you'll need to be a member to view the update page
http://www.imate.com/t-JAM.aspx
Any chance of a big storage version :wink:
Thanks to masseur who posted this on Exp forums.
--
rmg.
Nice one fella, any chance you could get it uploaded to the FTP
rgds
jim
I would except iMate have buggered up my membership and I cant log in.
Im sure it will be there soon. Cheers for those pics on Modaco BTW ;-)
np, they were taken in bad light with my nokia 3200
rgds
jim
Thanks very much I-mate: Italians always at last
What is the difference between WWE and UK
Great!
What is the difference between WWE and UK?
(New!) ExtROM version 1.11.132 (WWE)
(New!) ExtROM version 1.11.179 (UK)
Thanks,
OB
WWE would bacically be customisation for use in US and other english speaking territories etc, however UK basically would have settings and configurations for use with the UK networks.
rgds
Jim
where can i download it, except i-mate site, i have mda compact(
FTP uploaded
WWE and USA versions can be found at
ftp://xda:[email protected]/Uploads/Magician/
Can anyone pls upload the EXT Rom cab files from this upgrade.
also this new rom, since the OS and Radio version are 1.11, would i be wrong to assume that they are exactly the same as the QTEK OS and Radio?
If they are then we would only need the ext rom cab files from this iMate 1.11 to upgrade?
Thanks
Nutdhanai said:
since the OS and Radio version are 1.11, would i be wrong to assume that they are exactly the same as the QTEK OS and Radio?
If they are then we would only need the ext rom cab files from this iMate 1.11 to upgrade?
Click to expand...
Click to collapse
I was thinking the same... I updated my i-Mate JAM to the Qtek 1.11 and it has been very stable... However, I would like to get the UK Ext Rom (1.11.179) to give it a whirl...
OB
Nutdhanai said:
Can anyone pls upload the EXT Rom cab files from this upgrade.
also this new rom, since the OS and Radio version are 1.11, would i be wrong to assume that they are exactly the same as the QTEK OS and Radio?
If they are then we would only need the ext rom cab files from this iMate 1.11 to upgrade?
Thanks
Click to expand...
Click to collapse
Well I couldnt wait so I upgraded.. everything in the EXT ROM is the same as the QTEK 1.11 except
1 - the usual KSE FAX v2.09,
2 - Version_WWE_111132.cab
3 - Imatev1.00.1.0.cab
All other MMS, BT Patch, etc.. are exactly the same as the QTEK EXT ROM.
so to summarise, I wouldnt bother upgrading to this ROM if you already have the QTEK 1.11, unless you want the KSE fax or the imate customisation.
The curiousity has just wasted an hour of my work time.. :lol:
now Im back to hexediting the rom for big storage..
Hello!
Can anyone tell me how to upgrade to Qtek 1.11. i have an Qtek s100 now.
Another question: Can I use the ExtROM version 1.11.132 (WWE) on this phone?
Thanks
Björn
Re: FTP uploaded
Talents said:
WWE and USA versions can be found at
ftp://xda:[email protected]/Uploads/Magician/
Click to expand...
Click to collapse
the link is not working....
Help!
Hello!
Can anyone tell me how to upgrade to Qtek 1.11. i have an Qtek s100 now.
Another question: Can I use the ExtROM version 1.11.132 (WWE) on this phone?
Thanks
Björn
mda compac
hi can any one explain how to update my mda compaq
or a link explaing how to do it
Thanks dav
Can anyone please check whether the words added to dictionary in intellipad are maintained after a soft reset, using this version?
This is my only complaint with the new Qtek ROM.
can anyone please check if the new ROM version make good coffee or not ?...sorry... :lol: :lol: :lol:
snorlax said:
can anyone please check if the new ROM version make good coffee or not ?...sorry... :lol: :lol: :lol:
Click to expand...
Click to collapse
Pathetic!!
Re: Help!
WaspWorld said:
Hello!
Can anyone tell me how to upgrade to Qtek 1.11. i have an Qtek s100 now.
Another question: Can I use the ExtROM version 1.11.132 (WWE) on this phone?
Thanks
Björn
Click to expand...
Click to collapse
Can I use any of those roms, i´m not so good att this and I dont want to kill my s100....

Rom Updates for Qtek 9100

Hi everybody,
Where can QTEK users register to receive information about new rom updates? Is there a place like Club iMATE for Qtek owners?
My Versions are:
ROM 1.1.7.5
Radio 01.01.10
Protocol Version 4.0.13.16
ExtROM version 1.1.7.105
From what I understand there is a new ROM version 1.1.9.3, where can I get it? How do I install it? What are the improvements over the version I have?
Is there a WM5 upadte somewhere?
And by the way, the new Skype works very bad on my machine... maybe my mistake was installing it on the MiniSD? Does it make a difference?
Thanks!
Ari.
I got the same rom version. I would like know also if there is a qtek club such as imate.
most roms are here for download,
ftp://xda:[email protected]/Uploads/HTC_Wizard/
If you want the 1.1.9.3 rom take the Imate rom
the only registration for qtek that I know of is on the dutch site.
http://www.qtek.nl/register.asp
Should I install the iMATE ROM? Do you know what are the improovements over the ROM version I have?
This machine is cute, I really like it. But it is full of bugs and VERY slow... :roll:
I tried to instal the Imate Rom from the FTP site and I was able to download it, but when I tried to instal it, I got the "Invalid Vendor ID" message. What am I doing wrong?
Johannie, please do a search next time
read this
http://forum.xda-developers.com/viewtopic.php?t=33796&sid=f3429e7c6fd1ea5d124664d182121080

Help with DeviceData file

Hi guys,
I have upgraded succesfully my QTek 9090 BA to WM6 following the wiki, have some issues with WiFi and would like to upgrade my ROM...I guess...I'm new on this PDA world so still confused with terms.
I'm following the Wiki and got stuck here: http://wiki.xda-developers.com/inde...0.ROMx20.thatx20.willx20.workx20.forx20.mex3f.
My Device ID returns only:
P H 2 0 B W W E AT%CID? 5 . 6 0 . 0 0 1.12.00 % 4
So for what I understand:
MOdel PH20B
Lang: WWE (English)
Operator: AT%CID?
Rom Version: 5.60.00
Extended Rom version: 1.12.00
Radio Version: 4
Is this correct?
If so, I don't understand if this: BA_WWE_BP_12200_169_10602_SHIP.exe would be good for me...
Can you please help?
Thanks!
The Devicedata file was need in the old days (WM2003).
Now on WM6 (and WM5) the file does not matter or make much sence.
BA_WWE_BP_12200_169_10602_SHIP.exe
This is a 2003 rom with the rom vesion of 1.22 (making it old even for WM2003 as 1.4 was the last I can remember), the Radio is 1.602 (which is even older than your 1.12 (1.15 is the current one))
Best bet for you is the WM6 rom and up your radio to 1.15 (wiki will tell you how).
Hope that helps
Hi! and really thanks! It confuses me how 1.6 can be older than 1.15...?? Anyway, I updated to Radio rom 1.15, however reading more I found that it has nothing to do with WiFi...
Now, I seems to be understanding more and more about the Roms, extendend roms and radio roms with TypeI and II.
I have been looking at the FTP site and what I still need to understand is what Rom to use...how do you difference those codes? I'm using rar 20226...is this ok? Any newer ROM or more stable?
And what defines the WiFi driver? The ROM itself? I have the problem that my WiFi signal is very poor...
Thanks again
There are a few thiings that are wrong with the BA as it is end of life and if it was not for XDA-Devlopers it would be dead.
Wifi has its issues there is a work around and that has something to do with the way you start it. (to be honest I can't remember what you have to do but search will help)
Bluetooth is the other know issue, if you don't want to make friends then the best way to do this is post a "My Bluetooth does not work thread". That a low post count will get you flammed at big time.
The Type I and type II roms were based on the format of the roms and the tools we used about 3 years ago. Some smart guy worked out you could bypass this whole porcess (the checking of the country code) by using a flash program form some other HTC device.
So by the time WM5 came out then the "on id exe" solved that issue and we have been using it ever since.
The radio you talking about is 1.06, if you want to look at some of the roms we had found and posted on the FTP (unitll M$ got us to close it) then try this link.
http://wiki.xda-developers.com/index.php?pagename=BA_Versions
Extra rom was a carrier based issue (wiki has a whole section on it) however WM5 and WM6 did not use the same system so the space was reused for the rom (is one of the steps in the upgrade process).
As for the best rom, this is up to you.
Xplode used be active and now its Sun_dream.
Both of these guys know there stuff and have my Full respect.
Have fun

Speed of BA w/WM2003?

By virtue of my 2 x XDAII's failing for whatever reasons (abuse, long-life, etc.), I had to shift to one of my XDAII's (BA) with base OS:
=======================================
WM2003 SE
Version 4.21.1088 (Build 15045.2.6.0)
Processor: Intel(R) PXA263
Memory: 125.77 MB
ROM v.: 1.40.00 WWE
ROM date: 03/10/05
Radio: 1.12.00
Protocol: 1337.42
ExtROM v: 1.40.923 WWE
Model No.: PH20B
=================================
I have found that this phone is WAY SLOWER than the XDAII - it's really incredibly slow! (And I had my XDAII with less RAM available!)
I have had problems connecting in Mumbai (India) with Vodafone (this happens with other units (EDGE modem/XDAII) too, but this is *extreme*!
I have to shut off the radio (put into flight mode) then back on, in order to connect to GPRS, or it simply will not connect!
I have tried flashing the ROM for the radio to 1.15, but I have to edit the file on the unit, else I get the error - it's really very time-consuming!
I'm afraid that all my time that I put into this unit will go to waste if I do not have a stable unit that I can rely on....
Any feedback on this?
Thanks!
Try the T-Mobile's rom or PDA2K's rom in Blue Angel Upgrading section.
The O2 rom bugs me too much.
Also install O2 Asia upgrade (I guess u r running a non asian one thats why BA isnt showing compatibility with ur network. Try upgrading to WM5/6 and see if u have luck on GSM/GPRS since majority of asian networks phail with BA WM5/6/6.1/6.5
dark_prince said:
Try the T-Mobile's rom or PDA2K's rom in Blue Angel Upgrading section.
The O2 rom bugs me too much.
Click to expand...
Click to collapse
Yes, it's the O2 ROM - not sure if this one was the one I bought in SIN or in the UK...any ideas, or way to tell?
Both were O2 branded....
dark_prince said:
Also install O2 Asia upgrade (I guess u r running a non asian one thats why BA isnt showing compatibility with ur network. Try upgrading to WM5/6 and see if u have luck on GSM/GPRS since majority of asian networks phail with BA WM5/6/6.1/6.5
Click to expand...
Click to collapse
Which is the best upgrade (simplest) to do, stable, with almost no bugs, with a similar to original config/options?
TIA!
well first of all if you want less bugs do not install the OEM crapware (the extrom software) you may even resize the extrom partition to 128 k to use the space as storage
http://alevri.atspace.com/ - updated Shipped roms list and mirrors which i will keep online
My advice is to flash the latest t-mobile 1.42 rom delete radio and extrom update files and flash rom only
xplode said:
well first of all if you want less bugs do not install the OEM crapware (the extrom software) you may even resize the extrom partition to 128 k to use the space as storage
http://alevri.atspace.com/ - updated Shipped roms list and mirrors which i will keep online
My advice is to flash the latest t-mobile 1.42 rom delete radio and extrom update files and flash rom only
Click to expand...
Click to collapse
Wow - thanks for the tips - wonderful to have the gurus of the BA helping us!
So, how does one delete the radio files?
I unzipped and extracted, then ran the .exe file, which started the RUU update.
xplode said:
well first of all if you want less bugs do not install the OEM crapware (the extrom software) you may even resize the extrom partition to 128 k to use the space as storage
http://alevri.atspace.com/ - updated Shipped roms list and mirrors which i will keep online
My advice is to flash the latest t-mobile 1.42 rom delete radio and extrom update files and flash rom only
Click to expand...
Click to collapse
explode... i have 02 XDAIIs, what your advice for ROM on my IIs? and btw i cant expand my extrom to 128K using tools on XDA-DEV (extrom_unlocker.cab and Repart_doc.exe) had any idea?
Stevo.Mksr said:
explode... i have 02 XDAIIs, what your advice for ROM on my IIs? and btw i cant expand my extrom to 128K using tools on XDA-DEV (extrom_unlocker.cab and Repart_doc.exe) had any idea?
Click to expand...
Click to collapse
Why can't you? Keep in mind that you can only do this only in 2003. So, from what I have read in your other posts you are either in 6.1 or in 6.5 (going back to 6.1). You have to use the Repart_doc and the ExtRom Unlocker tools in order to do so.
Aside from everything, I have been using xplode's version of 6.5 and I am pretty happy with it (both stability and usability)-wise.
If you are absolutely disgusted by it, you should try sun_dream's 20578. Best 6.1 that I have had...
Hope this helps.
@egzthunder1: did back to original rom wm2003 02XDAIIs and other cooked rom in wm2003, but it failed due to physical logic reason when im runnig repart_doc.exe. but when im expand my SX66 its work!! weird thing.
Stevo.Mksr said:
@egzthunder1: did back to original rom wm2003 02XDAIIs and other cooked rom in wm2003, but it failed due to physical logic reason when im runnig repart_doc.exe. but when im expand my SX66 its work!! weird thing.
Click to expand...
Click to collapse
That is the weirdest thing... it should work fine since it is the same phone...

Categories

Resources