Please Please can someone help, my MDA Compact 2 is gone mad. I tried to install the new touchflo rom and its just crashed. When i plug it in to my mains it comes on the splash screen with t mobile and stays there, when I tried to plug it to my pc, nothing. can someone please help me, dont want to lose my phone.
If you dont wanna lose your phone then prove it and read the forums.
Sorted, cheers dude
Related
Hi all,
My XDAII was working without any problem this afternoon and the battery was getting low and the screen stopped it self.
I thought that was normal because of the battery.
I came to home and put on the charger, but still nothing on the screen !
I made a reset and still nothing. I removed the battery and put it again but still nothing
What should i do to get my XDA II working again
Please help meeeee
I have many important things on it.
Thanks a lot
exactly the same with my problems but my situation is : while i installing some game on it, it freeze and i try to restart it but nothing on my screen. Plzzz anybody help me out,when i put my charger, the ligh doesnt work and when i take off the battery ( charger still plug) the led is red.??????
Help me out plzzzzzzzz
if you have important thingies in your unit it surely is not there anymore by now.. best thing to do is to send it back to the manufacturer.. it might need reflashing of the ROM or something like that..
Hey guys,
ActiveSync wasn't finding my phone last night, so I soft reset it. When it started up, it's stuck on white screen (where the blue, windows mobile screen should be). ActiveSync cannot see the phone at all.
I've read the post: http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
I've put it into bootloader menu (SPL 1.09) and connecting the USB cable changes "serial" to "USB"
Windows XP finds "HTC USB Sync" device and ActiveSync's wheels start turning.
A few seconds later, ActiveSync stops wokring, saying the device can't connect.
All I want is to recover my SMSs, the rest I don't care.
Is there a way to connect to the phone's files in 'HTC USB Sync' (bootloader) mode??
*crosses fingers*please say yes, please say yes*
All the best,
Dax.
i have the same problem!
I managed to upgrade to 1.09 while stuck in this white screen... is there any fix to the white screen?
The other forum post didnt work, tried the battery off for 20mins, the usb plugged in with no battery (phone doesnt even turn on this way)
none work
please help you brainy guys
Have you tried to flash from SD card... There is a guide i WIKI.
yeah, I had to hard reset and lose my data
i also have the white screen. it just died one day, at the time i didnt even know about roms and i'd never heard of this site.
any help getting it mended would be well appreciated.
Hi Toppy,
Try pulling battery out, other than that, only thing to do is a hard reset.
Sorry
Details for a hard-reset should be easy to find on this board.
Great reason to backup frequently.
(I use PIMBackup 2.5 everynight at 4am and sbp backup twice a week at 4:30am)
a blank screen
heyy guys i have the same problem with my screen, i bought a new one in ebay, after installed the new screen, i turned on the phone, the screen works fine, but when i turned off the phone and change the sim card, then when i turned on the phone again the screen was in blank!!!
guys if you can help my please i will aprecite it!!! i cant live without a touch screen
Creation magic,
Did you follow my suggestions?
My phone gives me white screen every now and then when I reset it. I simply reset again and it's fine.
Seems to occur more frequently the longer I leave the phone without total formatting. (It's Windows - it needs ocassional formatting)
about my white screen
when i turn off the phone and turn on again my screen appears in blank but when i did a hard reset my screen works fine!! i don't really understand my htc 8525 hahaha he is crazy and the call button and end call button doesn't work.
thanks
thanks guys for help me and everyone here in this forum!!!
you're a real brainy guys
Hello,
My T-Mobile MDA suddenly had no power and so i thought the AKKU was broken.
I put in a new one, but after it boots ,it stays a few seconds in the Windows 2003 Start screen, where you can calibrate the screen and after a few seconds
it starts to boot again and this happens again and again.
I thought maybe its a problem, which is already known in this forum and so i would like to ask if someone had this problem please let me know if theres a solution and tell me how to solve this.
thank you for your help
using a fully charged battery (from a friend?) try reflashing again.
Thank you for this idea.
I tried this, but it didn't change anything..
I think i have to buy a new PDA.
Hi,
I have the same problem with WM6.0/6.1 if my accu is empty.
The solution I´ve found is to use the original powersource adapter while booting.
By the way:
Everytime I am using another adapter with usb-adaptercable, e.g. 1000 mA too, the accu loses rapidly his power. Ist there any htc-specification for the original-hima-poweradapter like apple uses it for the ipod nano?
Hi,
I have got my trinity phone one year ago and never had a problem since last week. When starting my phone, it stops on the first screen (with "orange" logo) and nothing more happens.
I tried to reset it without succeed. The phone is not detected by the "activeSync" to make it flushable.
Help please !
Yves Florent CK
my problem is mor or less the same... only that dont apears any image on screen and the green led is constantly on...
I have loaded a long time ago an old version of ROM Gelly.
This ROM worked perfectly to a friend who suggested to do the same with my trinity.
The PROBLEM is that when i try to open the pda it freezes to the first srceen showing the rom version and after....nothing!
I tried to load again Gelly from the bootloader, it begins to run, it runs about 1% then the trinity makes a flash (this means it loses the connection with the pc) and then shows me again the first screen....
Please i need help!
me to. i try install the rom original and my pda is living again.
try this to
hi,
2 things ...
have you tried a hard reset ? (hold both softkeys & hit reset button)
and when flashing:
when you first run the rom upgrade from PC with phone on Activesync, it is quite common for phone to hang at the bootloader screen ...
worry not -
just re-run the upgrade from PC again immediately, without disconnecting or attempting to switch phone off.
(the word USB should be visable on device under the coloured bars)
if you do get hung up at bootloader screen a hard reset should at least get you back to where you were, and you can try re-flash again.
hope this helps,
regards,
Kevin
My trinity won't work anymore...
Hi all!
My trinity wont't work anymore. When i press the ON/OFF-button, the display is lighten up a bit, then the buttons are lighten up. And nothing more.
When i will go to bootloader mode, it is the same.
And when i will to a hard reset, the trinity ask me to press SEND or END key for restore factory default or cancel. When i choose the SEND key, on my display some ridicoulous letters appear, but nothing more.
When i try KITL mode, everything is the same.
Can someone help please?
Because i can't do something on my trinity
EDIT (maybe this can help my helper ):
After some time, the display and the buttons are not lighten up anymore.
When i try to charging the battery, it only works, when the buttons are not lighten up (when i switch on, charging is ok; when the display is lighten up a bit, charging is ok; when the buttons are lighten up, charging won't work; when the display and the buttons are not lighten up anymore after a time, charging is ok)
hi... i have a similar problem.. i tried soft reset, hard reset, but my phone wont go past the boot screen.. previously i just updatet the windows mobile from 5 to 6 and the phone crashed half way throw.. can some one help me.. by the way the windows mobile was one update from the web...
never mind... problem solved... tks anyhow
weezer_88 said:
never mind... problem solved... tks anyhow
Click to expand...
Click to collapse
ok solved...
Can you tell how you did it?
Thanks
weezer_88 said:
hi... i have a similar problem.. i tried soft reset, hard reset, but my phone wont go past the boot screen.. previously i just updatet the windows mobile from 5 to 6 and the phone crashed half way throw.. can some one help me.. by the way the windows mobile was one update from the web...
Click to expand...
Click to collapse
But my trinity don't go to the boot screen, nothing on the display but lighten up slightly...
Nevertheless, can you please post, how you solved your problem?
THANK YOU in advance!
I downloaded the original Rom windows mobile 5 from http://www.htc.com/www/SupportDownload.aspx?p_id=3&cat=2&dl_id=111 then entered in KITL mode, connected the usb and reinstalled the original Rom, and all was fine...
I need the manual for an HTC PM300, please if someone can give me the manual. My HTC don't wanna start, it starts for a bit, but don't wanna get to the boot it gets a white blink than it shot down, don't know why! please, if anyone can help me, PLEASE !!!!!!!!!!
Had the same problem
Have you tried Hard resetting?
Are you sure the battery is fine?
Charge the phone for some hours.Try hard resetting
After resetting flash the phone with "shipped ROM"
You should do well.
Thats the best you can do if the problem is software.
If it didnt work out,my bet is the issue is hardware.