Hiya Guys
Have the new just installed the new OS , problem im having is trying to pair any BT devices it see's the devices , both a K800i and a Nikkai BT GPS which would paire with my XDA IIs whenit was running 2003SE , anyone had any BT issues.
Many Thanks
RF
- Its Not What You Know , or who you know , Its what you know about who
you know.
yip had the same problin...bt gps and jabra 250v..just restarted the pda(xda IIs) a few times..it found them 1 at a time.
Bluetooth Random Wake Up Issue Is Still Here
Hi all,
I didnt have any problem pairing bluetooth handsfree and blue angel, however, I notice that the random wake up issue is still here.
I wonder whether we can find solution for this since this has been a very annoying thing since WM5
hi all,
problin i found out today.i could not use bluetooth head set and bt gps at the same time.is there a fix or something i,ve not installed fron the cabs file..
thanks
TO XPLODE
What do you think about this BA_Broadcom1.7.1.3400_OEM_Helmi_Test???
It is part of the OEMAddonsForKitchenV2, should we use it?
realkinguk said:
hi all,
problin i found out today.i could not use bluetooth head set and bt gps at the same time.is there a fix or something i,ve not installed fron the cabs file..
thanks
Click to expand...
Click to collapse
Try to modify:
HKEY_LOCAL_MACHINE\Comm\BTPAN1\Parms
"MaxConnections"= 10 hex or 16 decimal (the same)
thank.
but nee luck.when i restart the ba.the values go back to 1..
bluetooth setting.com port.just 0 works..
thanks
flyboy_____ said:
TO XPLODE
What do you think about this BA_Broadcom1.7.1.3400_OEM_Helmi_Test???
It is part of the OEMAddonsForKitchenV2, should we use it?
Click to expand...
Click to collapse
I have not tryed it but it may work, try it if it does not work remove it (or perform hard reset)
Related
Hi everyone
up until today i was using a 3970 with tomtom2 and a b/tooth emtac receiver.Bought a xda2 today and firstly cant get the emtac to bond with thexda think im using the correct passkey of 0183 but the xda keeps saying invalid bluetooth pin :?:
any ideas as im pulling my hair out here,also on a similar subject cant seem to get the xda to even recognise my b/tooth headset,a hbh 30 which was working fine with the ipaq.Hope i can get these issues sorted as the Xda looks great.
Regards
nige
Ohh..well... WELCOME to buggy XDA2 bluetooth!
Try to install the new Bluetooth Tools Patch,maybe fix the prob man!
Regards
nigelfish
I have a rebadged emtec receiver and can confirm that you need to install bluetooth tools (even with the latest ROM).
I have rebonded this thing many times due to ROM upgrades and hard resets, the other day it would not accept 0183. weird. A soft reset fixed this problem.
Thx for the swift reply guys,i will give it a go asap
watch this space
ah well thought it would be to easy,i downloaded the bluetooth tools and still not accepting the passkey of 0183 just saying invalid bluetooth pin.Any other ideas guys?
nige
this may be a stupid question but are you using the keyboard or transcriber to enter 0183?
The keyboard is the way to go here as you can't confirm if transciber is recognising correctly.
emtac problem sorted
Hi evreyone
got the emtac problem sorted thx,passkey turned out to be wrong should have been 2003.So tomtom seems to be ok now,but still cant get my hbh30 bonded,not even seeing it when im on discoverable,so again any ideas would be welcome,and once again thx for all your help with the emtac problem
nige
Update
Hbh 30 now bonded but having trouble/or could be me getting used to it ! /
i can acept calls into the headset ok but making a call from the xda i cannot use the headset just the xda to talk with.Anyone using the microsoft voice command?
Just would like to be able to have full hands free when in car.
Thx for any help offered.
Hi All
I have the above setup and am having a nightmare trying to get the bluetooth GPS to work. I have tried every setting I can find and even upgraded the ROM to 1.90.96 to see if that helped but still no joy. Basically whichever COM port I assign 0,4,5 or 8 (the only options allowed) it shows up in the "Other Bluetooth GPS receiver" catergory in TT6 but it will not connect. I have also noticed that the only time the BT LED on the Holox device flashes is during the initial pairing with the jasjar, before the device default password "0000" is added. Once this function has been completed tthe light remains solid and tt6 does not recieve the gps signal.
I know the Holox unit and the TT6 is working fine as I have tried it on an old HP 1940 with wm2003 and it works perfectly.
Has anyone got any ideas, suggestions or experienced the same problems
When you set up the Pairing with the GPS receiver use COM0 and select the serial port. Once this is done, set up a new outgoing COM port and make sure that the "Enable secure connection" box IS NOT checked. My Exec never works with any BT GPS receivers if this box is checked.
Then in Tomtom set use other BT GPS receiver and select COM0.
Pug.
Hi Pug
No joy I'm afraid. Have tried this more times than i care to mention but TT^ will not recognise the gps device.
Sounds like a problem with your BT stack then. If it worked on your other device then it's obviously a problem with the Uni. Seen as this isn't a common problem, might be some problem with your setup. Thinking about it now, Tomtom overwrites some BT files during install, as you seem to be using an AKU3.2 ROM which will have updated BT stack, try deleting these from the windows folder.
ttn6bt2003.dll
BtCoreIf.dll
BtSdkCE30.dll
If it doesn't work, you can always re-install TT6
Big G said:
Hi All
I have the above setup and am having a nightmare trying to get the bluetooth GPS to work. I have tried every setting I can find and even upgraded the ROM to 1.90.96 to see if that helped but still no joy. Basically whichever COM port I assign 0,4,5 or 8 (the only options allowed) it shows up in the "Other Bluetooth GPS receiver" catergory in TT6 but it will not connect. I have also noticed that the only time the BT LED on the Holox device flashes is during the initial pairing with the jasjar, before the device default password "0000" is added. Once this function has been completed tthe light remains solid and tt6 does not recieve the gps signal.
I know the Holox unit and the TT6 is working fine as I have tried it on an old HP 1940 with wm2003 and it works perfectly.
Has anyone got any ideas, suggestions or experienced the same problems
Click to expand...
Click to collapse
Try reading here:http://forum.xda-developers.com/showthread.php?t=283253
That should sort it.
Mav
Still No joy with Jasjar, Holox BT-321 GPS & Tomtom 6
Hi All
I've tried all fixes for the above problem suggested by pug and mavrik64 earlier on this thread but without success. This is a little frustrating to say the least. The Jasjar has had clean install with nothing loaded other than the default programs included with the latest ROM build 1.90.96 from Jwrightmcps, the UK 'O2' setup and TomTom 6. As I know the software and Holox unit work fine on my old HP1940 running on wm2003, I'm convinced it is something in WM5 that is giving me the problem. I have read other forums were other people appear to have similar problems.
Please note; the main reason I flashed the ROM from that previously installed 1.30.76 was to try and find a fix for this problem. The older version gave me exactly the same problem.
Anyone got any ideas
I am using Ivans Beta 15 and no problems, try flashing with that.
You have a new PM in a few moments as well.
PUG
Any idea where I can get hold of a copy of Ian's Beta 15 ROM. I've trawled round this site but can't seem to locate it
Big G said:
Hi All
I've tried all fixes for the above problem suggested by pug and mavrik64 earlier on this thread but without success. This is a little frustrating to say the least. The Jasjar has had clean install with nothing loaded other than the default programs included with the latest ROM build 1.90.96 from Jwrightmcps, the UK 'O2' setup and TomTom 6. As I know the software and Holox unit work fine on my old HP1940 running on wm2003, I'm convinced it is something in WM5 that is giving me the problem. I have read other forums were other people appear to have similar problems.
Please note; the main reason I flashed the ROM from that previously installed 1.30.76 was to try and find a fix for this problem. The older version gave me exactly the same problem.
Anyone got any ideas
Click to expand...
Click to collapse
Sorry to hear this didn't work. I am using JCs current rom with TT6 and Holux GPSlim 236 and it works like a charm.
Good luck
Mav
Hi folks
Am hoping that some one can help me with a problem i have
I have an o2 XDA exec, with a genuine Tomtom 6 installed
I have a Globalsat 308 bluetooth GPS unit
I also have an O2 Karuna bluetooth headset
All the bluetooth stuff is working correctly
Now, what I want to do is to have tomtom's directions coming through the bluetooth headset... then i can use it while on my motorcycle
but, and pardon my french - am buggered if i can make that happen - any clues?
or do i need to get a dedicated headset for this?
a dedicated one i'm afraid
aladinsane said:
Hi folks
Am hoping that some one can help me with a problem i have
I have an o2 XDA exec, with a genuine Tomtom 6 installed
I have a Globalsat 308 bluetooth GPS unit
I also have an O2 Karuna bluetooth headset
All the bluetooth stuff is working correctly
Now, what I want to do is to have tomtom's directions coming through the bluetooth headset... then i can use it while on my motorcycle
but, and pardon my french - am buggered if i can make that happen - any clues?
or do i need to get a dedicated headset for this?
Click to expand...
Click to collapse
There was a reg hack for this, you will need to search the early threads on this subject. I'm sure I have this at home (am at work at the mo) will check later.
Mav
PS. the reg hack just opened the BT channel for sound.
mavrik64 said:
There was a reg hack for this, you will need to search the early threads on this subject. I'm sure I have this at home (am at work at the mo) will check later.
Mav
PS. the reg hack just opened the BT channel for sound.
Click to expand...
Click to collapse
Found it, read http://forum.xda-developers.com/showthread.php?t=257415
Mav
Dear All,
I'm looking for a tools to switch off/on Freehand.
Why ? Because to use Tomtom bluetooth GPS, Freehand should be off (can't attach 2 devices at same time).
Thanks for your help !
Silkup.
silkup said:
Dear All,
I'm looking for a tools to switch off/on Freehand.
Why ? Because to use Tomtom bluetooth GPS, Freehand should be off (can't attach 2 devices at same time).
Thanks for your help !
Silkup.
Click to expand...
Click to collapse
really? hrmm i wonder if it's just the bluetooth version then on the hermes, cause i use tomtom 6 on my hermes and i have talked to my wife on my bluetooth headset while tom tom stayed running on my way home from work
that's 2 devices at same time as my gps is bluetooth
and so is my headset
cyberjak said:
really? hrmm i wonder if it's just the bluetooth version then on the hermes, cause i use tomtom 6 on my hermes and i have talked to my wife on my bluetooth headset while tom tom stayed running on my way home from work
that's 2 devices at same time as my gps is bluetooth
and so is my headset
Click to expand...
Click to collapse
Hello !
If I
1 : switch off "freehand option" of my headset
2 : Start Tomtom
3 : switch on "freehand option"
It's working, but 3 hours to start tomtom
Regards,
Silkup.
2 bluetooth devices WM6
i'am using WM6 from Helmi.
With official WM2003 ROM and widcomm stack i can use
headset adn GPS at the same time, but with WM6 and
MS stack no.
Are there some methods to solve this issue?
Does exists widcomm for WM6?
Thank's
Hello, I've got problem with my bluetooth gps (nemerix).
When I'd like to connect to my pda first I'm looking for new devices in bluetooth manager, then parring and seeting outgoing port. And then I'm starting my Navi aplication. It works.
But, when I'm shutting down gps device, turning off buetooth in pda and start it again I've to all tasks mention above - searching, parring and so on. In my opinion,when it's added to my bluetooth devices and properly parred once it should work every time I'd like to use it, however gps device doesn't communicate with pda.
It's quite annoying, why I cannot just start my gps device and my navi aplication and run - I spend a minute with setting connection.
Do anybody know how to fix my problem?
Are you using a custom rom? If so it could be a problem with the rom you are using. I've had the same problem in the past and a different rom fixed the problem.
I've got now Schaps_WM6Pro_Hermes_4.31_WWE_Full, which rom are you using -RanDomIze Final Storm v2.10?
Have you tried "Pocket Buetooth Tools"? You can find it here: http://bluetooth.i-networx.de/download_e.html
I hade major problem pairing my BT-gps to use with Tomtom before I found BTTools.....
I'll try, thanks for advice
Kladden said:
Have you tried "Pocket Buetooth Tools"? You can find it here: http://bluetooth.i-networx.de/download_e.html
I hade major problem pairing my BT-gps to use with Tomtom before I found BTTools.....
Click to expand...
Click to collapse
great tool thanks