Related
Hi
I have just installed the pocket bluetooth tools from http://bluetooth.i-networx.de/index_e.html which has sorted out my bluetooth GPS, but now my parrot hands free kit doesnt work.
Any suggestions?
Cheers
JustinP
which parrot system do you have and what firmware
tested qtek 2020 1.66 without Bluetooth Tools
DriveBlue 3.13 o.k.
CK3000 3.13 o.k
CK3100 4.02 o.k
CK3300 4.02 o.k GPS tested with Destinator 3 :roll:
CK3500 4.02 o.k GPS tested with Destinator 3
Hi
I have ROM 1.60, the parrot worked until I installed the bluetooth tools, and now it doesn't
Cheers
JustinP
so uninstall bluetooth tools
I have unistalled the bluetoth tools, and the parrot now works, but as predicted the gps does not.
I need both of these thing working, and if they dont the device will be going back.
I cant beleive how unfinished the spv-m1000 is.
JustinP
justinp said:
Hi
I have just installed the pocket bluetooth tools from http://bluetooth.i-networx.de/index_e.html which has sorted out my bluetooth GPS, but now my parrot hands free kit doesnt work.
Any suggestions?
Cheers
JustinP
Click to expand...
Click to collapse
same here
i deinstalled bt tools. only solution to get my parrot ck3000 v3.13 working correctly (most of the time)
regards ize|man
I do have the same problem.
But I'm not using a GPS right now and running without Bluetooth Tools. Like izeman said, this way it's working most of the time.
Currently I am planning on buying a bluetooth GPS Receiver and am pretty much interested in an solution.
So if you find one, please let us all know.
mobileprofi said:
CK3300 4.02 o.k GPS tested with Destinator 3
CK3500 4.02 o.k GPS tested with Destinator 3
Click to expand...
Click to collapse
Can you post your experience with CK3x00. How is it working with XDA II? Like CK3000 or better?
I am not able to use the latest version of BT Tools too because of the CK3000. Try the previous version. My Carkit works ok, but I dont have GPS.
Ian
IanF said:
My Carkit works ok, but I dont have GPS.
Ian
Click to expand...
Click to collapse
by "working OK" do you mean that soetimes it doesn't connect?
Or is it just 'cos the features are limited with XDA II and else you are perfectly happy :?:
...
Madcap Magician said:
by "working OK" do you mean that soetimes it doesn't connect?
Or is it just 'cos the features are limited with XDA II and else you are perfectly happy :?:
...
Click to expand...
Click to collapse
Features are limited, the caller gets echo (but that I am sure this is just an installation issue), without a mount it is impossible to dial while on the move and I still tend to plug it in to charge it while on the move (cig lighter).
Its not as good as I thought it would be and I am thinking of going for a fixed installation. This is no reflection on the kit, just the way I use it.
Hope this helps?
BT tools Plantronics, Parrot and Seefree
I got a slightly different problem. I have a bt headset m3000 plantronics, a parrot CK300 v3.13 car kit (my car) and a seefreekit 1.1 (in my wive's car which I borrow sometimes...). With the BT tools both the plantronics and seefree work ok, but the parrot doesn't bond/pair anymore.
Any solutions? Suggestions? When I de-install the parrot works ok, but then I need to pair everytime another device when I want to use it.
Hi,
If you are using BT Tools v 1.1.0.0 (12.4.2004) it wont. You need to go back a version.
Ian
so with version 1.0.1.2 it should work? :?
PTD said:
so with version 1.0.1.2 it should work? :?
Click to expand...
Click to collapse
Works for me.
Re: BT tools Plantronics, Parrot and Seefree
I tried a previous version of BT tools... doesn't work. Any ideas? But de-installing works fine. But I can only connect one headset (BT Tools recognizes both the plantronics as the parrot as a headset and without BT Tools it can manage only one headset. But then... with BT Tools it doesn't wordk at all...)
PTD said:
I got a slightly different problem. I have a bt headset m3000 plantronics, a parrot CK300 v3.13 car kit (my car) and a seefreekit 1.1 (in my wive's car which I borrow sometimes...). With the BT tools both the plantronics and seefree work ok, but the parrot doesn't bond/pair anymore.
Any solutions? Suggestions? When I de-install the parrot works ok, but then I need to pair everytime another device when I want to use it.
Click to expand...
Click to collapse
Hi all!
I found a strange problem reguarding bluetooth software conflicts beetween Qtek2020's Microsoft Bluetooth Stack and the Widcomm 1.4.1 (BluetoothGPS.cab) Stack.
It means.
Without the Widcomm Stack installed I am able to syncronize via Bluetooth with ActiveSync (com6).
And I moreover can surf the web trough my Qtek GPRS connection via Bluetooth. And that's perfect.
But.
With the Widcomm Stack installed I am still able to syncronize via Bluetooth with ActiveSync (on com6) but I loose the bluetooth-modem capacity!
I own a Trust180 Bluetooth/USB adapter.
I need the Widcomm Stack only to use my Fortuna Clip-On GPS and I will not need it anymore if I could find the way to use it with Qtek-Microsoft Bluetooth Stack, but I have not found the way to do it yet.
So I think I could only surf the registry to find the answer to let both stacks work together, is it possible?
Did anybody have the same problem?
Did anybody find the answer?
Thanks in advance!
Giuseppe
Hi Giuseppe,
I have the same Fortuna Clip-on GPS receiver and I'm able to use it with the MS BT stack. It bonds and offers the option to set up a serial port. If you accept this, it allocates Com 5 to the GPS. I use Tomtom navigation software and in the software set it up as a NEMA 38400 baud connection using Com 5 - all works fine.
Paul
XDA 2i Widcomm and Fortuna
I'm having the same problem with a fortuna clip on bluetooth gps and an XDA2i--for some reason that build of the widcomm stack (3900) doesn't work, yet earlier versions, such as that shipped with the XDA2s, appear to work fine--does anyone know where to find a version of the widcomm bluetooth stack from broadcom newer than 3900?
paulfanner said:
Hi Giuseppe,
I have the same Fortuna Clip-on GPS receiver and I'm able to use it with the MS BT stack. It bonds and offers the option to set up a serial port. If you accept this, it allocates Com 5 to the GPS. I use Tomtom navigation software and in the software set it up as a NEMA 38400 baud connection using Com 5 - all works fine.
Paul
Click to expand...
Click to collapse
Hi Paul,
thanks for your reply, I know my Clip-On should work together with every software for on road navigation...but...I unfortunately need OziExplorer for my off-road navigation and...OziExplorer need a com7 port.
That's all :wink:
I think I'll try Franson's tools: GPSGate & something else as I read here http://www.franson.com/forum/topic.asp?TOPIC_ID=17&SearchTerms=qtek,2020
I wouldn't like to hardreset my device again...I lost the number of my hardresets.
Thank you anywhere
Giuseppe
Hi giuseppe,I hate broadcom stack too, after many hresets, i thinks there is no way to solve this and other bugs, like the serial modem bluetooth connection.
The only winning move is to sell our 2020i and buy magician
Bye
Luca
Hi Luca, don't surrender, it can work!
I simply followed this http://franson.com/forum/topic.asp?TOPIC_ID=17&SearchTerms=qtek,2020 .
Now I am able to use my Fortuna GPS and my BT Motorola HS805 at the same time. And morover I am still using my Qtek's BT modem ability.
I payed 30 euros for Franson GPS Gate, but it solved my problems.
I am now trying to let ActiveSync work via Bluetooth because it's the only ability I lost. :?
Bye, thank You for your post,
Don't surrender!
Giuseppe
anyone has the same problem ?
When I'm using TomTom 5 as navigator and i receive or make a phone call, the navigator stops everything and when a finished my phone call everything comes back again.
Why ?????
I have the same and I thought it was normal beacuse the bt can handle only one device, isn't it?
No
You are wrong because usually bluetooth allow only 1 connection per time of different kind!
For example 1 voice connection to the carkit and 1 data connection to the gps!
Before I had a Nokia 6630 and everything worked perfectly !
Post your appreciated comments!
Bye
Re: No
filippino said:
You are wrong because usually bluetooth allow only 1 connection per time of different kind!
For example 1 voice connection to the carkit and 1 data connection to the gps!
Before I had a Nokia 6630 and everything worked perfectly !
Post your appreciated comments!
Bye
Click to expand...
Click to collapse
In fact, I did manage to get 3 connections (GPS, Headset, ActiveSync) at one time w/o problem.
To answer yr original question, my Tomtom 5.0 works fine on phone call.
Help
So can you help me to solve my problem ?
I have an IMate Jam with Rom 1.11 italian,
what's your version ??
Maybe you have updated the bluetooth stack ?
Thanx !
Help
So can you help me to solve my problem ?
I have an IMate Jam with Rom 1.11 italian,
what's your version ??
Maybe you have updated the bluetooth stack ?
Thanx !
BTW, I am using GPS Gate all the time so that I can open 2 GPS software (TT and Routis 2). Maybe that's another reason I didn't have problem.
I have the same problem.
I am using i TREK GPS and Jabra 800.
When im navigating, and in the middle I receieve a phone call, the GPS connection hangs even after the phone call ends.
I usualy make a SR after that and continue navigating.
What is the problem??
Thank you
Same story is with my MDA T-Mobile Compact:
EVERY (I stress it) EVERY time I use it with Jabra BT-800 and GPS receiver BT-338 when OziExplorerCE is on for a short time suddenly Ozi hangs. I try to restart it - no way, when BT option is touched, Magician says: NO BT HARDWARE ON THIS DEVICE INSTALLED. Only SR (sometimes even only HR) helps.
Tried to use JAM_Bluetooth_No_Hardware_Patch-1.CAB - it does not help.
Is there a solution? GURU, wake up, please!
Same sad story. This time it's about PocketGPSMoscow software, GPS BT-338 and SBH-100 BT Hand-free.
Every time there is an incoming call, the device looses BT connection to the GPS module.
Turning BT on and off does help,but doesn't bring much comfort. I hope this is not the BT-338 problem.
Should anyone have any bright ideas on how to find a solution to the problem, many will be very greateful.
It's strange. I really doesn't have any problem w/ my Imate Jam (flashed w/ O2 Traditional Chinese 1.11 rom) using my TomTom BT GPS w/ Sony HBH 600 BT headset.
Maybe you guys can try the following to see if it works. (for rom of 1.11 or later)
1. pair yr GPS w/ the pda.
2. In BT Com port setting, make sure both incoming port for Com4 and outgoing port for Com5 is check
3. Install GPSGate, set input port as Com5 and create virtual port Com6
4. Uninstall TomTom BT GPS driver since U doesn't need it at all
5. In TomTom GPS setting, choose "Other GPS" and choose "Franson VSerial Com6"
Let me know if this works 4 U or not.
Anybody try to upgrate/downgrate the rom version? One man in GSM service said, that BT doesn't work propriety with LEng Keybord install to 1.11 version rom. M.b. with TomTom thу same problem?
If you ask me : the problem isn't with your BT but with the phone.
I only use an GPS BT receiver and if somebody calls me, i pick up the phone and also then the GPS disconnects until the call ended ...
zoom21 said:
Anybody try to upgrate/downgrate the rom version? One man in GSM service said, that BT doesn't work propriety with LEng Keybord install to 1.11 version rom. M.b. with TomTom thу same problem?
Click to expand...
Click to collapse
I've got 1.12 and I'm sure GSM is not involved - BT is the dead fish.
Every time I have a BT connection with Jabra and BT-338 simultaneously, EVEN when there is NO incoming calls, BT + GPS hang the Magician.
Unfortunately I do not remember if this bug happens when Only BT-338 is connected. Will check and report.
hiya guys,
I just bought a tomtom navigator 5 Original Cd from a mate and installed it on my XDA II, well my nightmare turned out when i tried to connect it with my BT GPS receiver and it doesnt seeem to work. The gps works superb with 6630, 6600 but it doesnt work with XDa, i donno why. a friend suggested tht it only works with a Tomtom gps receiver, is tht true.
My question is, is it possible to use any bluetooth gps receiver with XDA for tomtom or do i need a special one.
thanks for looking
I use tomtom 5 with a third party bt gps reciever, I believe it is best to update to 5.1 though. 8)
First of all, install the last version : 5.2 :wink:
exactly same problem for me. My Gps is HAMLET BT. No solution until now.
dj_factor said:
hiya guys,
I just bought a tomtom navigator 5 Original Cd from a mate and installed it on my XDA II, well my nightmare turned out when i tried to connect it with my BT GPS receiver and it doesnt seeem to work. The gps works superb with 6630, 6600 but it doesnt work with XDa, i donno why. a friend suggested tht it only works with a Tomtom gps receiver, is tht true.
My question is, is it possible to use any bluetooth gps receiver with XDA for tomtom or do i need a special one.
thanks for looking
Click to expand...
Click to collapse
bt
hello, i bought a cable gps reciever and was told by the seller i had turn off all incoming beams for this cable type to work, maybe its the same with the bt one?
have a search on this site
http://pocketgpsworld.com/modules.php?name=Forums&file=index
Theres a seperate section for tomtom and lots of advice and tips
I there any way to let our BlueAngle to connect GPS and BlueTooth headset at the same time I use WM6 already with Garmin Mobile 10 (10x) but can't used head set at the same time anyone have some idea to solved this problem
This is indeed a weird issue that is still occuring, the only 'work around I found' is to make two outgoing connections in order to connect them both, usually you have the headset connect towards the blue angel, so in inbound connection, if you connect your BA towards your headset, so in the bt menu really select to connect it, and than connect your bt antenna, this is no problem, I've tried all myself already to resolve this as I use this a lot and no other solution up to know, tried changing registry where you have like max connections on bt and all, but all that doesn't work
Grtz,
Tom
Prille said:
This is indeed a weird issue that is still occuring, the only 'work around I found' is to make two outgoing connections in order to connect them both, usually you have the headset connect towards the blue angel, so in inbound connection, if you connect your BA towards your headset, so in the bt menu really select to connect it, and than connect your bt antenna, this is no problem, I've tried all myself already to resolve this as I use this a lot and no other solution up to know, tried changing registry where you have like max connections on bt and all, but all that doesn't work
Grtz,
Tom
Click to expand...
Click to collapse
Please explain how you did this?
Thanks in advance
touchu said:
I there any way to let our BlueAngle to connect GPS and BlueTooth headset at the same time I use WM6 already with Garmin Mobile 10 (10x) but can't used head set at the same time anyone have some idea to solved this problem
Click to expand...
Click to collapse
I'm not very sure but if you use HELMI_BA_WM5_BT1.7_TEST.CAB it works, i use BT GPS and a Car handsfree and is able to receive GPS data on my BA and also instruction from BA to handsfree and when there is incoming call i still get it.
wilsacan said:
I'm not very sure but if you use HELMI_BA_WM5_BT1.7_TEST.CAB it works, i use BT GPS and a Car handsfree and is able to receive GPS data on my BA and also instruction from BA to handsfree and when there is incoming call i still get it.
Click to expand...
Click to collapse
Can you post the file? I've the same problem...
anilkaparthi said:
Please explain how you did this?
Thanks in advance
Click to expand...
Click to collapse
Well basically it's rather easy for my as I use Tom Tom and once Tom Tom is powered on it will activate the BT and connect any device already linked to your BA,
So I power my BT car kit, but don't activate my BT on my BA, I wait for 10sec and then my car kit makes a sound like it can't connect (because my BT isn't activated) and so he stops looking but remains powered on, then I just power on tomtom, this activates my BT function and connects my car kit and tom tom antenna immediatly, dunno how this comes but he always does this,
Several versions of tomtom already installed and always works like a charm...
i had a similar problem...
the work around i found is that connect audio first and then connect gps. it'll always work
Have to try this too
I will try these methods tonight then will report back here later on thank a lot for all good ideas here
Confirm
Well Done I found the solution even it not so convinience but it work out
1. Turn Off BlueTooth on BA
2. Turn on BT Headset , GPS
3. Wait for a while
4. Open GPS program for my case is GARMIN MOBILE XT
4.1 MOBILE XT turn on bluetooth then it will link to both device without registry edit at all
5. Enjoy the show and drive safely
I will keep update on testing with these 2 devices.
actually i use garmin que with gpsgate,
b4 starting garmin que .... the audio had to be connected..
It works for me, I use TomTom bluetooth GPS.
The trick is to start bluettoth first manually and then GPS program. Bluetooth headset can be started any time.
wilsacan said:
I'm not very sure but if you use HELMI_BA_WM5_BT1.7_TEST.CAB it works, i use BT GPS and a Car handsfree and is able to receive GPS data on my BA and also instruction from BA to handsfree and when there is incoming call i still get it.
Click to expand...
Click to collapse
Really? after i patched this cab, i can't use handsfree any more, but only stero available
Prille said:
Well basically it's rather easy for my as I use Tom Tom and once Tom Tom is powered on it will activate the BT and connect any device already linked to your BA,
Several versions of tomtom already installed and always works like a charm...
Click to expand...
Click to collapse
What GPSsettings do you use, program and hardware port?
Thanks.
After use 2 BT GPS + BT head set for almost a week everything work great but the only thing you have to aware is do not move one of the device out of range otherwise you will lose the connection from them even you have put them back in range. I notice that by I put headset with me then leave the phone and GPS inside the car after I come back the HeadSet can not be pair with the phone anymore have to turn off and then turn on the BT in our BlueAngle again. However there is only 1 problem i can found out.
New way
Ok I found more easy way I use program camm btIO V0.6 from www.silentservices.de or you can download from
http://www.freewarepocketpc.net/ppc-download-btio-bluetooth-tray-icon.html
then just tab the icon to turn on/off bluetooth
however I also use another program call CicleBT then map the button of camera which i don't use much to turn on/off Bluetooth in case have some problem to connect to GPS MOBILE 10x
Hardware port setting also help me sometion no need to turn off bluetooth before enter Mobile XT
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardSettings_GPS
Enjoy