Related
I have MDA tmo (US). My radio ROM is 1.13.10.
While i am using streaming audio (http://di.fm), i cannot receive any phone calls and will not receive "missed call" notification either.
Is this "by design" or radio Rom issue? does anyone have the same issue with different ROM???
tokuro said:
I have MDA tmo (US). My radio ROM is 1.13.10.
While i am using streaming audio (http://di.fm), i cannot receive any phone calls and will not receive "missed call" notification either.
Is this "by design" or radio Rom issue? does anyone have the same issue with different ROM???
Click to expand...
Click to collapse
this issue is quite wide spreaded on polish pdaclub.pl forum, however in my case it works flawlessly. i've started downloading abt. 500 KB file via GPRS straight from Wizard and then called from another mobile. i could pick up this connection and after that PIE just asked me if i'd like to resume file downloading.
maybe this 'bug' depends on network, not neccessary on hardware...?
thx... you do have a newer radio rom. It'll be interesting to know how other ROM may work...
I think this is network issues and not phone. It depends on your carrier.
benfica88 said:
I think this is network issues and not phone. It depends on your carrier.
Click to expand...
Click to collapse
It is not a operator/network issue*. The same part of the network does not know simultanously that the GPRS is actually downloading at that instant AND also terminating a call. The two things are asynchronous contexts.
It's the handset radio/OS that handles the switch and pausing (if it's a class B device) of GPRS when a call comes in. This sounds like something that will be fixed/made less flakey in newer revisions.
(*although that's not to say that the behaviour will not be slightly different on various networks)
well, i was under that impression because every phone ive had from nokia to motorola to htc has this problem.cant receive a call while data is being downloaded.
eva_d said:
this issue is quite wide spreaded on polish pdaclub.pl forum, however in my case it works flawlessly. i've started downloading abt. 500 KB file via GPRS straight from Wizard and then called from another mobile. i could pick up this connection and after that PIE just asked me if i'd like to resume file downloading.
maybe this 'bug' depends on network, not neccessary on hardware...?
Click to expand...
Click to collapse
Samehere with Qtek 2.18 NL ROM on Dutch T-Mobile network: when i start downloading and i receive a incoming call, i can just answer the phone and the download is interrupted. When i end the call, i can select to continue download.
Sorry to bring back an old issue, but I think this is a ROM issue, I think on the custom 2.17 ROM it worked fine but I dont remmber for sure. THis is a big issue.
tokuro, you mentioned that you listen to streaming radio using GPRS/EDGE. Are you doing this without the audio skipping/rebuffering every 4 minutes or so? If so, how? What program/settings are you using?
Take a look at this , made a lot of research about the issue
http://forum.xda-developers.com/viewtopic.php?t=54738&highlight=
Hi there
Just started messing with my Rogers Tytn and I've run into a big problem. At work we have a 'smart box' that is supposed to recognize if a fax or phone is calling (the same number for both). When I call the office from the Tytn the 'smart box' decides that the call is coming from a fax and switches on the fax machine and tries to connect.
Is there a way around this?
The way these "smart boxes" work is that they detect the periodic tone that fax machines transmit at the beginning of the call to disable downstream echo cancellors (if you are sending a fax you can sometimes here a beep every second or two before the receiving fax answers). I suppose it is possible that the TyTN is transmitting a similar tone during call initiation, but I have never heard of such a thing. What radio version are you running?
Can the "smart box" be configured for exceptions based on Caller ID?
John
Hi there
Radio version is 1.42.00.00
Can't program the smart box. It isn't that smart.
Still in buyers remorse period. If I the one place I can't call is the office than the phone is useless to me. And I really like it too. Dang!
kruwreka said:
Hi there
Radio version is 1.42.00.00
Can't program the smart box. It isn't that smart.
Still in buyers remorse period. If I the one place I can't call is the office than the phone is useless to me. And I really like it too. Dang!
Click to expand...
Click to collapse
Um, pardon me if I missed something, but I haven't heard of that particular Radio Version. Is this new? I tried searching the entire Hermes main forum, and I get no hits (surprisingly, not even THIS message/thread).
Can you show us where you sourced this radio from?
-pvs
Not sure this helps you. It's a 4 day old Rogers wireless TyTn.
ROM 1.34.631.14
ROM date 04.17.07
Radio version 1.42.00.00
Protocol version 32.75.7020.18H
kruwreka said:
Not sure this helps you. It's a 4 day old Rogers wireless TyTn.
ROM 1.34.631.14
ROM date 04.17.07
Radio version 1.42.00.00
Protocol version 32.75.7020.18H
Click to expand...
Click to collapse
Hmmm ... I'm sure there are others here on these forums who would love to get their hands on that radio. I do not remember seeing any reference to it before. Of course, if it's causing your problem, then maybe we're all better sticking with what we've got.
Unless somebody more knowledgable than I (most of the folks here are, btw) can recommend anything better, I would think that MIGHT be where the problem is originating. Maybe you could flash a different radio to see if that changes anything for you. FWIW, the radio in my signature has been the best one I ever found for my locale and carrier.
Good luck!
-pvs
New Radio ROM
I thought I seen someone mention this on another forum and a couple of us were asking around. Is it possible for somebody with the new TYTN to dump there ROM so that the rest of the community can get there hands on the new Radio ROM.
i think you should check with your service provider, it might be a wrong definition on your line
yes rogers has radio 1.42.00.00 we just need to find a way to get it......
austinsnyc said:
yes rogers has radio 1.42.00.00 we just need to find a way to get it......
Click to expand...
Click to collapse
I agree, I have checked with HTC and Rogers, niether are releasing the current ROM, they are offering no downloads at present, hopefully somebody can get there hands on the Rogers phone and dump the ROM. Wait and See
Call from TyTn being received as fax
kruwreka, just for giggles, try calling your work number with the phone on speakerphone an see what happens.
Perhaps the mis-detection has something to do with the audio quality. There may be a hiss, hum or some other audio artifact that causes the box to confuse the call. Switching to speakerphone will let a lot more audio from your side of the phone go through possibly overriding any network introduced noise.
My first thought would be that any unusual noise on the line would be introduced by the switching network you are passing through, not from the phone itself. You can test that by calling someone else and seeing if the signal sounds clear. If the phone were introducing noise then it should be apparent to others you talk with on the phone. If the noise is introduced by the switching network then you may not be able to tell except by having someone answer the incoming call before the box can switch it to the fax or by disconnecting the box for a test.
thank you folks for all your responces...the problem seems to have resolved itself once I deleted the fax number from the contact information leaving only one instant of the number and rebooted
I just purchased a HTC Tytn (unbranded). I have so many questions and can't seem to find the answers. First, does anyone know a program that will update the clock with the network without doing the At&t rom update. Second, Will it hurt to do the at&t update to my phone or will I loose the voicedial function and 2nd video cam ect. Is the ms voicedial ver 1.6 worth it. So many more I'll make another thread later. By the way thanks for the forum. You all are great and I hope to learn alot.
I am on cing/att and using an unbranded tytn... i have also flashed the official att rom on it (yes, its wm5, but i needed PTT)... anyway, smartdial is there, but you will lose video calling (which att dont support anyway) but the fron cam will still function, i used atek software's cool camera to prove the drivers were still on the phone and working.. and i dont use MS VC 1.6 so i cant answer that one...
Tytn vs 8525
Shogun, Thanks for the info. I don't need the PTT. I do like the auto update feature for the clock using the network though. So far I like the phone, (I'm just starting to get used to it. Can you remap the PTT. I will start doing a lot of international flying soon and needed the unbranded phone. Does the At&t service determine the video or can 2 people with a tytn and a 3g signal just start video calling? So many questions!
Chansen760 said:
Shogun, Thanks for the info. I don't need the PTT. I do like the auto update feature for the clock using the network though. So far I like the phone, (I'm just starting to get used to it. Can you remap the PTT. I will start doing a lot of international flying soon and needed the unbranded phone. Does the At&t service determine the video or can 2 people with a tytn and a 3g signal just start video calling? So many questions!
Click to expand...
Click to collapse
Not sure about the auto-update feature and working on other roms... but they should support it..
The PTT can be remapped, use a different rom, or search for sleuth's PTT fix.
The video calling is dependant on the dialer on the phone (in the rom, or installable otherwise), it requires a certain dpadmenu.dll in order to work, but if your ATT its not going to work anyway.. it is provider dependant.. and 3G dependant
For any of you who've been using a Nokia Symbian phone in recent months, you'll be happy to hear that fring has just released a WM5/WM6 fring client on a "preview" basis (beta of the beta - but not quite alpha testing).
fring was the one thing that was tempting me back to my Nokia E61 after finally "fixing" my TyTN. Basically, it's a combined VOIP/IM client that supports Skype, Google Talk, MSN and SIP as well as it's own community.
So those of you still stuck on WM5 or SJPhone forget about it. For those with any issues whatsoever with the WM6 VOIP client, forget about it. From my experience, fring SIP over 3G was even better than the built-in Nokia SIP client on the E61 over wifi in terms of call quality and availability (and that says a lot).
Does it have bugs, yes. Does it need improving, yes. But it's still the best thing out there. And even if you only use Skype Mobile, the RAM usage of fring is less than half (although call quality for Skype seems to be noticably lower than over SIP).
Anyway, just wanted to give you a heads up. Don't kill me if you hate it (and no, I'm in no way employed by them). To find it, just do a google search for fring or go to www.fring.com. Their Windows Mobile forum can be found here:
http://www.fring.com/forums/forumdisplay.php?f=11
I have problem to in stall it on my Hermes.... Can`t install it...
Fring - Hermes not supported
After registration i recieved the following message:
Your handset is not supported ... yet.
I'am eager to try fring, but we have to wait until the Hermes is supported.
somebody out there, running fring on a hermes?
Edit: Now i recieved my downloadlink, hmmm i will try later tonight back home and report back....
Tried this morning b4 seeing this post. It works quite well...
it works
I finally installed fring, and it works..... (just tried skype)
tried over GPRS&G3, and the phone wakes up from standby flawlessly
i also like those facts (bandwith usage):
fring for symbian phones consumes
~ 8MB for 60 min of mobile-VoIP call;
0.05 KB per Instant message
fring overhead ~ 10KB per hour connectivity
i hope those figures are equivalent to those on a WM5/WM6 device....
i kept getting a no internet connection error...
Any way to take the: "On mobile by www.fring.com" ??
Thanks for the heads up from Quist! I had just installed the new version of Skype only to have it crash everytime I make a call, just about to go back to the old version but will give Fring a go as just the fact that is not as memory hog like Skype appeals to me.
Warning to those on limited data plans
Be aware that fring automatically starts and attempts to log in every time the device is reset. Since I do a backup every morning at 2:00 AM using Spb Backup, which does a soft reset afterwards, my GPRS data usage skyrocketed. Not to mention that I was fast asleep at 2:00 AM, not ready to talk to any contacts at that time. Bad, bad fring! Bye, bye fring... I may try you again when you behave better!
I know that there is an easy way to stop it from doing this, but it is just the principle behind it. I hate programs that try to second guess my wishes and do things on my behalf without asking me whether that is OK or not. Besides, it should have the option of not using GPRS/3G for those of us on limited data plans (in my case, $30 per month for 7 MB of data download!)
John
johnburn said:
Besides, it should have the option of not using GPRS/3G for those of us on limited data plans...
John
Click to expand...
Click to collapse
FYI
Fring has a option under Menu->Setting->Disable GPRS/3G
when disabled it will use wifi only....
cheers,
chaos42
chaos42 said:
FYI
Fring has a option under Menu->Setting->Disable GPRS/3G
when disabled it will use wifi only....
cheers,
chaos42
Click to expand...
Click to collapse
DOH!!! How did I miss that one?! And guess what? There is also an option "Disable autostart". OK, now I feel like a fool. Maybe I should edit my original post to say "Make sure that you disable autostart if you don't want fring to log in at 2:00 AM after a soft reset, and make sure to disable GPRS/3G if on a limited data plan."
My apologies to the fring developers.
John
this software is pretty bad ass,, i finally got it to work a few days ago.... i even started a call with a friend on google and it worked great!!!
thumbs up!
Did your Google Talk call go through your speakerphone speaker? Is there a way to change that?
xojc said:
Did your Google Talk call go through your speakerphone speaker? Is there a way to change that?
Click to expand...
Click to collapse
You have two (maybe three) options: The first is to use the built-in rear speaker (the default). The second option is to connect the wired headset that came with your device. The third option (I haven't tested this or know anyone that has got it to work, but according to Teksoft's web site it should work on the Hermes) is to use Bluemusic to redirect the rear speaker output to a Bluetooth headset.
There is no way to use the built-in front (ear) speaker as this is reserved for the phone hardware.
John
Check out http://forum.xda-developers.com/showthread.php?t=315654 for a FULL review of Fring.
plusnet settings
I would like to use fring do use up my call allowance viq plusnet but I cant get the settings right. Can anyone help
how toinstall a .sis file in Jasjar?
hi senior members of this forum!
Im a newbie in installing apps in pda's. ihave O2 xda exec (jasjar). i downloaded the fring91.sis (which is said to be compatible with jasjar & O2 Exec) but its extension is .sis (Fring91.sis)
the question is how i will install it on my jasjar???
and please can u provide me some good links for registered apps for WM5 for my jasjar?
please help here!!!!!
waiting for ur replies!
Hi all, apologies for posting this, as there I know there's tons of other threads relating to this matter - I've spent quite some time reading (and being confused!) by them, but I can't seem to find a thread which a) has someone describing the exact problem I have, or b) giving a definitive solution. So here it is:
I have a UK MDA Vario II. It's my second one (replaced under warranty), this, and my first one both had a problem where I would seemingly randomly not receive calls or texts. The phone shows it has a signal, and the green light would be flashing to indicate service. However, on occasions, if you try to ring the phone, it diverts straight to voicemail. Sometimes service resumes normally (about an hour later) and I get a message informing me of my missed calls, and sometimes I have to do a soft reset to get it working again.
What I have gathered from reading on these forums is that I may need to upgrade my radio - it had version 1.05.02.00 on it (which it must have been shipped with).
So - following instructions, I put HardSPL 2.10 on to the device, then flashed the Radio ROM to version 1.47.30.10, deciding that this looked the safest bet based on the feedback of other people on the Forum. Having done this (last night) I decided to test the phone once per hour today by just calling it, and I only got to the second test before it failed again - showing signal and green light flashing - but calls going straight to voicemail.
So - I don't want to do any damage to the phone - but I need to know that when someone's calling me, it's going to ring (we're moving house soon, so I'm relying on certain calls from solicitors, bank etc etc). Can anyone tell me of a reliable Radio ROM version for an MDA Vario II on T-Mobile UK? (which won't introduce further problems!)
THANKS!!
broudie said:
Hi all, apologies for posting this, as there I know there's tons of other threads relating to this matter - I've spent quite some time reading (and being confused!) by them, but I can't seem to find a thread which a) has someone describing the exact problem I have, or b) giving a definitive solution. So here it is:
I have a UK MDA Vario II. It's my second one (replaced under warranty), this, and my first one both had a problem where I would seemingly randomly not receive calls or texts. The phone shows it has a signal, and the green light would be flashing to indicate service. However, on occasions, if you try to ring the phone, it diverts straight to voicemail. Sometimes service resumes normally (about an hour later) and I get a message informing me of my missed calls, and sometimes I have to do a soft reset to get it working again.
What I have gathered from reading on these forums is that I may need to upgrade my radio - it had version 1.05.02.00 on it (which it must have been shipped with).
So - following instructions, I put HardSPL 2.10 on to the device, then flashed the Radio ROM to version 1.47.30.10, deciding that this looked the safest bet based on the feedback of other people on the Forum. Having done this (last night) I decided to test the phone once per hour today by just calling it, and I only got to the second test before it failed again - showing signal and green light flashing - but calls going straight to voicemail.
So - I don't want to do any damage to the phone - but I need to know that when someone's calling me, it's going to ring (we're moving house soon, so I'm relying on certain calls from solicitors, bank etc etc). Can anyone tell me of a reliable Radio ROM version for an MDA Vario II on T-Mobile UK? (which won't introduce further problems!)
THANKS!!
Click to expand...
Click to collapse
Ive never had any problems with calls not connecting, the only times it has failed is due to poor reception and ofcourse network busy errors.
I wouldnt worry about the radio version it sounds like a network issue. Have enabled 3G on it??
mrvanx said:
Ive never had any problems with calls not connecting, the only times it has failed is due to poor reception and ofcourse network busy errors.
I wouldnt worry about the radio version it sounds like a network issue. Have enabled 3G on it??
Click to expand...
Click to collapse
I have (and thanks btw - it was your guides that I followed attempting the flash last night). The thing is, a good friend of mine has the same phone, in the same area - and he doesn't get these issues. My other half is also on T-Mobile, but uses a Sony Ericsson and doesn't have any problems with coverage. I'm in a city centre right now, and my house isn't far out - we both have decent reception there.
In fact - an interesting thing just happened (literally..) - I have my phone on a charging cradle, and it had been dormant for a while, so the screen was off. It woke up, as if about to receive a call or text, but then nothing happened... so I called myself from my office phone - and it connected ok.
About 5 minutes later my girlfriend called me up on the mobile, and I mentioned the issue was still there - and she said 'yeah, i tried to call you about 5 minutes ago'.... so it's like the call was received (i.e. the phone new about it), but it didn't complete the process.
I had thought a new radio version might help (from my very limited understanding of such matters) - are you saying that's not the case?
Does 3G affect this too? What can I do - I use the internet more than anything else on my phone....
Thanks
does anyone have any further advice on this?
Mr Vanx? Anyone??
My phone is still randomly losing signal - generally not accepting incoming calls (though today it was not accepting calls, whilst I was still able to make them...). I think I may go and get it replaced by T-Mobile - but I have upgraded the radio to 1.47.30.10, and have put HardSPL 2.10 onto it.
I guess I need to downgrade to original versions, but I can't seem to find a guide which tells me if what I want to do is OK (and how...).
Please - can anyone assist - I believe my original radio rom was 1.05.05.00, and the SPL version was 1.01.
I'm using 1.54.30.10 and it's fine. I found 1.54.00.10 pretty good as well. Much fewer dropped calls comparing to any 1.4x RadioROMs. Signal strenght is also better. The only thing I cannot comment on is the battery life, as I charge the phone every night whether it's 90% or 10%.
mean-machine said:
I'm using 1.54.30.10 and it's fine. I found 1.54.00.10 pretty good as well. Much fewer dropped calls comparing to any 1.4x RadioROMs. Signal strenght is also better. The only thing I cannot comment on is the battery life, as I charge the phone every night whether it's 90% or 10%.
Click to expand...
Click to collapse
did you have the same problems as me? - phone appearing to have a signal but calls being diverted to voicemail... seemingly randomly...
Use GSM mode as default
I have the exact same problem (I travel between Birmingham and London mainly) on my Vario II. It is really fustrating and my wife seems to think I dont answer her calls/txts on purpose(!)
On mine, the problem is due to the 3G mode - when I turn OFF 3G and use normal GSM the problem goes away. I get all calls/txt and internet connections sucessfully. When I turn on 3G the problem comes back - lost calls and unsucessfull internet connections. When in 3G mode sometimes it works somtimes it doesnt
Someone mentioned it could be that it is not switching between 3G and GSM automatically when no 3G is available. However, it happens even when in a good strong 3G area.
I swear this problem did not happen in the early part of my contract but only recently. One theory is that TMobile has sold so many 3G devices now both monthly and pay-as-you-go (esp 3G Data Modems with users using the network for their laptops) that the TMobile cells are just getting overloaded. Also, it could be that TMobile are also doing an upgrade of the 3G network and it is causing problems for users.
So what I do is run the phone in GSM mode as default (so no missed calls/txt and use Opera Mini for quick web surfing works well in GSM mode) Then switch on 3G mode if I am going to do any web surfing for more then 5 mins.
The added side benefit is also much much better battery life in GSM mode (3G soaks up the juice very quickly). I never use video calls ect so no loss there.
My Comm Manager has a toggle for 3G/GSM mode so I use that to quickly change between the 2 modes.
In Summary I would rather have a reliable phone for recieving/making calls then one which is hit and miss.
btw, Im now due an upgrade - wondering if I should stay with TMobile or not...
We appear to have the same phone 'lives'!
kismat1970 said:
I have the exact same problem (I travel between Birmingham and London mainly) on my Vario II. It is really fustrating and my wife seems to think I dont answer her calls/txts on purpose(!)
Click to expand...
Click to collapse
Same here - we're in the middle of selling 2 properties and buying another one, so I could really do with not having the phone playing up.
kismat1970 said:
On mine, the problem is due to the 3G mode - when I turn OFF 3G and use normal GSM the problem goes away. I get all calls/txt and internet connections sucessfully. When I turn on 3G the problem comes back - lost calls and unsucessfull internet connections. When in 3G mode sometimes it works somtimes it doesnt
Someone mentioned it could be that it is not switching between 3G and GSM automatically when no 3G is available. However, it happens even when in a good strong 3G area.
Click to expand...
Click to collapse
I've tried this today, and have been testing the phone on an hourly basis - so far so good.
kismat1970 said:
I swear this problem did not happen in the early part of my contract but only recently.
Click to expand...
Click to collapse
Spot on - this definitely was not a problem when I signed up (Nov 06).
kismat1970 said:
So what I do is run the phone in GSM mode as default (so no missed calls/txt and use Opera Mini for quick web surfing works well in GSM mode) Then switch on 3G mode if I am going to do any web surfing for more then 5 mins.
Click to expand...
Click to collapse
Do you know where I can get a reliable version of Opera Mini?
kismat1970 said:
My Comm Manager has a toggle for 3G/GSM mode so I use that to quickly change between the 2 modes.
Click to expand...
Click to collapse
I dont have this option in mine? How can I get it??
kismat1970 said:
In Summary I would rather have a reliable phone for recieving/making calls then one which is hit and miss.
btw, Im now due an upgrade - wondering if I should stay with TMobile or not...
Click to expand...
Click to collapse
Ditto - im due for upgrade in March, and had been looking at the Vario iii - but am now wondering if I should be looking at another network? Is this a consistent problem with all 3G devices on T-Mobile - or does it just affect the Vario ii?
broudie said:
Same here - we're in the middle of selling 2 properties and buying another one, so I could really do with not having the phone playing up.
I've tried this today, and have been testing the phone on an hourly basis - so far so good.
Spot on - this definitely was not a problem when I signed up (Nov 06).
Do you know where I can get a reliable version of Opera Mini?
I dont have this option in mine? How can I get it??
Ditto - im due for upgrade in March, and had been looking at the Vario iii - but am now wondering if I should be looking at another network? Is this a consistent problem with all 3G devices on T-Mobile - or does it just affect the Vario ii?
Click to expand...
Click to collapse
I signed up in Sep 06 and there was no problem with 3G mode then (problem free for the first 12 months at least).
From your phone internet rowser goto http://mini.opera.com/ and click on Download Opera Mini (this is latest version 4).
Before you do this make sure you have Esmertec Jbed midlet manager installed (Opera Mini is a Java App).
I use Opera Mini 90% of the time and its still renders fast on a GSM connection.
Ive uploaded the CABs for you for the Midlet Manager and Comm Manager.
I dont know if it only affects the VarioII maybe others can comment. If its a network issue then I would expect it affecting other devices also.
I want to go for the HTC Touch Dual (aka MDA Touch Plus on TMobile) as my next phone but may go with Orange if it is a network issue. Only reason I stay with TMobile is for the 'unlimited' web'n walk tarrif..but if I can't use 3G realiably then what is the point?
kismat1970 said:
I signed up in Sep 06 and there was no problem with 3G mode then (problem free for the first 12 months at least).
From your phone internet rowser goto http://mini.opera.com/ and click on Download Opera Mini (this is latest version 4).
Before you do this make sure you have Esmertec Jbed midlet manager installed (Opera Mini is a Java App).
I use Opera Mini 90% of the time and its still renders fast on a GSM connection.
Ive uploaded the CABs for you for the Midlet Manager and Comm Manager.
I dont know if it only affects the VarioII maybe others can comment. If its a network issue then I would expect it affecting other devices also.
I want to go for the HTC Touch Dual (aka MDA Touch Plus on TMobile) as my next phone but may go with Orange if it is a network issue. Only reason I stay with TMobile is for the 'unlimited' web'n walk tarrif..but if I can't use 3G realiably then what is the point?
Click to expand...
Click to collapse
Thanks very much for loading this stuff...
my other half is after the touch plus too - but have advised her to do some research before committing to T-Mob again.... though if she gets it and it's ok, i'll post some feedback on here...
Cheers
The Touch Plus is a good phone if you can live without Wifi...Ive read somewhere that this problem is dependant on the area you are in ...in particular the TMobile cell tower servicing the area you are in and it is possible to phone TMobile tech support to get an engineer to investigate and correct the problem. In my case that would be my home address and my work address - maybe worth a try?
Just to add my 2p worth... my radio is 1.05.05.00 (came on the phone, which was a replacement for the first which had the screen drift)... I've had occasional times when the phone's lit up but nothing's happened, but I usually chalk that down to the phone doing an activesync check for push mail, and as there's nothing there, it goes back to sleep.
To my knowledge, I've not really missed any calls or anything like that since way back last year - when sometimes I'd be sitting in the same café as a mate also on T-Mobile, and we'd do the you-call-me-i-call-you thing to get each others' numbers - and it'd go straight to voicemail! That was quite amusing.
Nobody's told me that they've had problems trying to reach me on my mobile though for a fair while now, so I'd almost completely forgotten about this problem!
edit: yay, 500th post! Took a while but got there eventually... Anybody want to sponsor me with a free Kaiser?
broudie said:
Can anyone tell me of a reliable Radio ROM version for an MDA Vario II on T-Mobile UK? (which won't introduce further problems!)
THANKS!!
Click to expand...
Click to collapse
Hi, I confess I haven't read the thread in great deal (am in a rush and am just passing through!) but you could try this official T-Mobile UK ROM. It's Windows Mobile6 and Radio 1.50.xxx (as far as I remember). The main thing is that it's official, and includes their latest sanctioned bootloaders etc. I flashed it to mine before taking back for warranty (as it's not possible to go back to the old 1.05 radio from recent unauthorised versions).
T-Mobile UK WM6 complete MDA Vario II ROM:
http://member.htc.com/ruudownload/t-mobile/TMobileWM6Step1-TMuk.aspx
sim
:O when did that become available? I swore to myself I'd keep an eye on the TM phone downloads site because I knew WM6 was available for some devices, but I completely forgot and since then they've rolled out WM6 for my phone... Which is a proper pain, but at the same time a really nice surprise.
Hard reset your device, install ALL applications on the phone (nothing on the micro SD - except outlook attachments). This should solve the problem.
sahuja said:
Hard reset your device, install ALL applications on the phone (nothing on the micro SD - except outlook attachments). This should solve the problem.
Click to expand...
Click to collapse
Why dig up this old thread and answer a question that has probably long since been resolved?
Wam7 said:
Why dig up this old thread and answer a question that has probably long since been resolved?
Click to expand...
Click to collapse
It's been useful for me. I'm having exactly the same experience on orange with an spv m3100 at the moment. This helps.
Dear,
My trinity (HERM300) test device have the same problem:
No CID, NO RADIo , NO GSM, NO IMEI
This info on my device (when having problems)
HERM300
IPL 1.04
SPL 2.10
plz plz plz any body help me for this ...........
john7992 said:
Dear,
My trinity (HERM300) test device have the same problem:
No CID, NO RADIo , NO GSM, NO IMEI
This info on my device (when having problems)
HERM300
IPL 1.04
SPL 2.10
plz plz plz any body help me for this ...........
Click to expand...
Click to collapse
you should check and find its at http://forum.xda-developers.com/wiki/index.php?title=Hermes_ExtractedRadioRoms