VX 6700 does not boot ,someone help? - XV6700, PPC-6700 General

i am trying to upgrade the new rom version,but it is not upgrade yet
now it always stay on SERIAL V1.02 ?I can not do anything
can anyone help me ?

I meet the same thing and dealed according to someone's post. I BLOG it at
http://www.e673.com/arch/radiostuck.html

try putting it into bootloader and redo the upgrade?

Related

Help Needed....Incorrect Vendor ID

Hi guys...I know there have been numerous reports of this kind, but I can't seem to find the answer.
I don't have this problem myself, but another person does and I thought I'd ask Olipro and the rest of the community for some help and clarification. Also hoping this answer can help anyone else who has this issue.
OK, Someone tried to flash WM6 before using the Unlocker. I know...don't say it. Anyway they now have the black screen of death and the tri-coloured bootloader screen, but are still unable to flash WM6 and obviously cannot use the unlocker until they have an O/S to sync with.
Has anybody encountered this and received incorrect vendor ID and found a way out of this scenario? They have an Austrian T-Mobile Ameo UK, so they can't even use the T-Mob 005 ROM for the UK Ameo (which doesn't require the unlocking of ones device).
Any clues peeps? It would really help a fellow owner out. Cheers for any input. Remember even if you said it before and don't want to repeat yourself again, please just cpoy & paste the answer here so it can act as part of the wiki for future incidents of this nature.
Thanks friends.
I got part of the experience. So I will tell what happen to mine AMEO.
due to some software conflict, my WM6 OS got kill. I was stuck in the tri-colour screen as well.
Since my unit was unlocked before, so refreshing (any) ROM solved my problem. (refreshing the ROM doesn't required activesyn running on yr PPC.)
If can't reflash yr ROM due to vendor_id error, I think the best way is to get the origin WM5 ROM (read it out from another same model) and flash it back.
after getting yr origin OS, then u can proceed unlocker and WM6 upgrade.
Hope this can help.
royalmail said:
I got part of the experience. So I will tell what happen to mine AMEO.
due to some software conflict, my WM6 OS got kill. I was stuck in the tri-colour screen as well.
Since my unit was unlocked before, so refreshing (any) ROM solved my problem. (refreshing the ROM doesn't required activesyn running on yr PPC.)
If can't reflash yr ROM due to vendor_id error, I think the best way is to get the origin WM5 ROM (read it out from another same model) and flash it back.
after getting yr origin OS, then u can proceed unlocker and WM6 upgrade.
Hope this can help.
Click to expand...
Click to collapse
Thanks Royalmail. I'll pass it on.

Screwed my ameo, no hard reset possible. need german tmobile rom

Hey guys plz help me.
I screwed up my ameo by installing a new rom without unlocking it first. now i cant even make a hardreset. but i can go into bootloader.
I need original german tmbile rom. i think this is the only that my device will acept and then unlock it and start it again. plz help asap. because i cant use it anymore.
Sexxmax said:
Hey guys plz help me.
I screwed up my ameo by installing a new rom without unlocking it first. now i cant even make a hardreset. but i can go into bootloader.
I need original german tmbile rom. i think this is the only that my device will acept and then unlock it and start it again. plz help asap. because i cant use it anymore.
Click to expand...
Click to collapse
When you bought the device,did you have a CD called ROM update utility or something like that? I have it with my Dopod.
hmm no i dont think so, but i can search my hundred cds
I found a cd with varios programms but no rom update utility so far.
Perhaps you could also advice me how to backup the original rom and install it if possible.
I know somebody else with a ameo. perhaps he can help.
Sorry, I don't have that experience. I would gladly help you if I know how. I'm sure there are many developers especially the ROM cook who know this like the back of their fingers. Come on, give this your guy a hand.
Check Mahmoods page here - http://mahmood1.com/ameo_athena_htcx750_WM6_ROMs.aspx
He has a list of available Roms near the bottom of the page.
Thank you for the link, i downloaded the tmobile rom but it didnt work i think because its not german.
Wrong vender id error. I need the original german rom to restore my machine and i think then i can update it.
Any german guys reading this? Somethere it must be avaible. or can somebody tell me how to extract rom from machine, becaue a friend of mine has the ameo too.

[Error 300] INVALID UPDATE TOOL!!! Is there any fix

Mods, Developers, Seniors...
Anyone know how to get around with the Error 300 Invalid update Tool, problem?????
I think we can donate(maybe pay will be appropriate in this case ) to the developers who bring out a fix for it.
My Device gets only into the bootloader mode. When flashing the original ROM from DOPOD SEA WM6 WWE SHIP, it gets to the progress screen and @ 0% the RUU gives the Error 300.
Tried the SD Card flash method also, no luck!
I beleive the CID area is corrupt!!!
I had downloaded a tool to change the splash screen image, didn't used it, but by mistake the EnterBootLoader.exe (SPLJump) got executed and screwed the device
Been through the forum, but no help at all
Any takers?
nauman said:
Mods, Developers, Seniors...
Anyone know how to get around with the Error 300 Invalid update Tool, problem?????
I think we can donate(maybe pay will be appropriate in this case ) to the developers who bring out a fix for it.
My Device gets only into the bootloader mode. When flashing the original ROM from DOPOD SEA WM6 WWE SHIP, it gets to the progress screen and @ 0% the RUU gives the Error 300.
Tried the SD Card flash method also, no luck!
I beleive the CID area is corrupt!!!
I had downloaded a tool to change the splash screen image, didn't used it, but by mistake the EnterBootLoader.exe (SPLJump) got executed and screwed the device
Been through the forum, but no help at all
Any takers?
Click to expand...
Click to collapse
it may be original rom,but does it have correct cid
1.you can get right rom by registration at manufacturers site
2.you can download one from wiki or forum,but in this case you will have to cid unlock your device,you have to download artemis uspl from artemis upgrading thread and than flash any rom you want,just be carefull to flash a rom that is for artemis,because flashing any other rom will brick your device
3.uspl the device and flash the rom you mentioned
farukb said:
it may be original rom,but does it have correct cid
1.you can get right rom by registration at manufacturers site
2.you can download one from wiki or forum,but in this case you will have to cid unlock your device,you have to download artemis uspl from artemis upgrading thread and than flash any rom you want,just be carefull to flash a rom that is for artemis,because flashing any other rom will brick your device
3.uspl the device and flash the rom you mentioned
Click to expand...
Click to collapse
I have the original ship ROM "P800w_SEA_ENG_WM6_Upgrade_20070713", even that fails with the same error message.
My device is already unlocked using the artemis uspl and I have used several ROMs earlier!!!!
anyone with this fix? I am getting the same error on my friends artemis. No help hitherto solved the problem. I wish if someone could really get on to it & get me the solution.
corepda said:
anyone with this fix? I am getting the same error on my friends artemis. No help hitherto solved the problem. I wish if someone could really get on to it & get me the solution.
Click to expand...
Click to collapse
I sent my device to HTC service center and go it resolved. That is the only thing which worked for me after a couple of weeks searching in the forums and no solution. But the HTC SC buggers replaced my device entirely and gave me back an old **** device . So also keep this in mind. you won't be sure, if you get your original device back after the so called repair. HTC SC in India is super *****y, had a bitter experience!
Now I have moved to TD2, know that I was at loss, but am happy to have a shiny new TD2
Service Centre at Mumbai Sucks Big Tym....
HTC service centre at mumbai sucks big time....
they said they can't replair my cell n it has a HARDWARE ISSUE!!!
stupid lasses....
What can we do here getting the same error....
Tried MMC method, nothing!
HOW CAN THERE BE NO SOLUTION TO THIS PROBLEM??????????
no have solution this problem ???
stupid ! CID area !!! STUPID HTC ---

Upgrading Problem

Hi.im trying (with many ROMs) but everytimes i return to my previously ROMS (i have A modded ROM,i flash a B modded ROM,after that i return to A modded ROM without see the B ROM)
How can i do?
What?????
xplain detailed please...
i need to know what is a modded rom
what is B moded mod
what is the issue
and what is your info IPL SPL and more things
about wich rom you have
and what you want too...
trying anothrer Room i bricked..any way for unbrick?pls
You'll never get a valid advise or help untill you post the vital data of the phone.So always post DOC Chip version of the phone and try to explain as simple as possible what you did and what exactly is the problem.
No one can help you like this.
Sorry for double posting but the brick came out after the 'upgrading problem' anyway how can i get the DOC chip version?
My device is ,ops was.....ç_ç , an I-mate K-JAM G3 , what else...
ok, have you ever noted the IPL/SPL version of the phone,it always displays at the first splash screen written in Red usually,do you exactly remember all those numbers ? were they something like 1.xx or 2.xx or 2.xx.0001 ?
k-jam phones come as both G3 and G4.
sure a G3 , i dont remember the precise numbers,but first time i flashed (months ago) i remember that i choose rom for G3,sure 100% it is/was a G3
Ok,download official k-jam rom 'K-JAM_WWE_216901_2169101_020710_ship.zip' from the following link and flash to recover back to its default status,then download WST_4.2.2 tool and run.Post the report generated by the WST tool here.
ftp://ftp.clubimate.com/

Help with booting.

My Htc Touch/elf on switching on shows a black screen with text "smart phone". it happened after the phone got accidently locked and a friend of mine tried to flash it.
please guide me on what to do.
do i need to flash it? if so can i do it myself?
i wana retain windows 6.1, but are there any latest upgrades to it?
What is ROM and is it causing the problem in my phone?
also give me a detailed list of al the softwares i would need to solve this problem and upgrade my phone.
please hurry!!
please read the stickies in ROM upgrading section

Categories

Resources