Hi guys...I know there have been numerous reports of this kind, but I can't seem to find the answer.
I don't have this problem myself, but another person does and I thought I'd ask Olipro and the rest of the community for some help and clarification. Also hoping this answer can help anyone else who has this issue.
OK, Someone tried to flash WM6 before using the Unlocker. I know...don't say it. Anyway they now have the black screen of death and the tri-coloured bootloader screen, but are still unable to flash WM6 and obviously cannot use the unlocker until they have an O/S to sync with.
Has anybody encountered this and received incorrect vendor ID and found a way out of this scenario? They have an Austrian T-Mobile Ameo UK, so they can't even use the T-Mob 005 ROM for the UK Ameo (which doesn't require the unlocking of ones device).
Any clues peeps? It would really help a fellow owner out. Cheers for any input. Remember even if you said it before and don't want to repeat yourself again, please just cpoy & paste the answer here so it can act as part of the wiki for future incidents of this nature.
Thanks friends.
I got part of the experience. So I will tell what happen to mine AMEO.
due to some software conflict, my WM6 OS got kill. I was stuck in the tri-colour screen as well.
Since my unit was unlocked before, so refreshing (any) ROM solved my problem. (refreshing the ROM doesn't required activesyn running on yr PPC.)
If can't reflash yr ROM due to vendor_id error, I think the best way is to get the origin WM5 ROM (read it out from another same model) and flash it back.
after getting yr origin OS, then u can proceed unlocker and WM6 upgrade.
Hope this can help.
royalmail said:
I got part of the experience. So I will tell what happen to mine AMEO.
due to some software conflict, my WM6 OS got kill. I was stuck in the tri-colour screen as well.
Since my unit was unlocked before, so refreshing (any) ROM solved my problem. (refreshing the ROM doesn't required activesyn running on yr PPC.)
If can't reflash yr ROM due to vendor_id error, I think the best way is to get the origin WM5 ROM (read it out from another same model) and flash it back.
after getting yr origin OS, then u can proceed unlocker and WM6 upgrade.
Hope this can help.
Click to expand...
Click to collapse
Thanks Royalmail. I'll pass it on.
Related
hi,
i have just downloaded the radio stack from O2 v4.21. I have tried to upgrade through active sync 3.71 it upgraded ok, but when i went to restart the XDA it gets stuck on the boot screen. the one that says test not for resale... and at the bottom right hand corner its says A.30.07 and then locks up.
normally before i tried to upgrade it said A.30.07 the underneath it said 4.20...
anybody know what i need to do to correct it?? i have looked through loads of forum posts and now i'am really confused???
Thanks alot
Zetex :?:
a bit of further info my Bootloader on my xda1 is 5.22
I'am also willing to pay for help i recieve to get my xda up and running again, because without it i really i'am stuck. I don't just use it as i gadget i use for everyday work/pleasure...
Thanks alot
Zetex
can anybody help me????
Hi,
No experts or semi-experts seem to be offering any help. I consider myself a fairly experienced novice so I am not sure how useful (or safe) my advice is. Take care! But here are my observations..........
You say the upgrade went OK? Does this mean you got as far as the message Flash Complete! Press OK to restart your device?
If so, this is encouraging as most of the problems I've located on this forum stopped part way through the upgrade (many at 1%).
Did you follow the instructions accompanying the upgrade to the letter? (ie. kill all running programs, switch off phone etc.)
The 4.21 upgrade is for the PW10A1 model not the PW10B1 (check the back of your xda's case to find out). Not sure how you deal with this one if yours is a PW10B1.
Can you enter bootloader mode? (soft reset with the stylus while holding the power button). If so, this is also good news. Someone with more experience than me could probably tell you what to do next. (Possibly flash a new ROM using the SD card method. Although you upgraded the Radio Stack it may have corrupted or upset your Radio Unit/'ROM'. If you decide to do this, I suggest something based on the v3.17 such as the XDA developers special edition ROM ..... you can always upgrade to WM2003 again later.).
Good Luck!
[/b][/u]
cranny,
Thanks alot for the reply m8, I did try what you have suggested by reloading the 3.17 o2 rom via sd card and now it won't even switch on anymore.
not to worry its gone off to the xda repaire center in Norwich today for repair under warranty.
Thanks for the reply anyway m8
Zetex
First I want to say sorry!
I have troobles to understand how to install it on my French HTC P3300 .
Can I?
Could someone explain me how to?
Thanx,
Andy
traxer said:
First I want to say sorry! I have troobles to understand how to install it on my French HTC P3300 . Can I?
Could someone explain me how to?
Click to expand...
Click to collapse
Sorry for what? Normally it is not necessary to open a new threat for any question that you might have, just join the different threats about a particular subject.
I guess you are new to all this upgrading stuff. First of all, and most important, is to find out whether your device is cid-locked or not. I think that it is safe to say that when you got your device through a telephone provider, like Orange or T-Mobile, at a very cheap price, then the device is locked and you should have it unlocked before flashing any ROM (except the official ones that you can download from your providers site). When you bought your device retail, at the full price (the Artemis is sold around 500 euro's), then the device is not locked.
Upgrading itself can be pretty straightforward: just establish an ActiveSync connection, run the <ROM name>.exe from your pc and follow the instructions on your screen.
grun said:
Sorry for what? Normally it is not necessary to open a new threat for any question that you might have, just join the different threats about a particular subject.
I guess you are new to all this upgrading stuff. First of all, and most important, is to find out whether your device is cid-locked or not. I think that it is safe to say that when you got your device through a telephone provider, like Orange or T-Mobile, at a very cheap price, then the device is locked and you should have it unlocked before flashing any ROM (except the official ones that you can download from your providers site). When you bought your device retail, at the full price (the Artemis is sold around 500 euro's), then the device is not locked.
Upgrading itself can be pretty straightforward: just establish an ActiveSync connection, run the <ROM name>.exe from your pc and follow the instructions on your screen.
Click to expand...
Click to collapse
I got it, but can I know if the device is locked or not? Is there any kind of test or software that do this?
thanx in advance
Claudio
cfrs said:
I got it, but can I know if the device is locked or not? Is there any kind of test or software that do this?
Click to expand...
Click to collapse
Unfortunately, no, not really. On older HTC models you could find out by running the mtty tool, but it doesn't work on the Artemis. I read somewhere that on our device that whole locking (and unlocking) method is quite different than on other models. That is also why it seems so hard to develop a free unlock tool for the Artemis.
The only way you can be absolutely sure is by running the unlock tool from imei-check, but they will charge you for it.
If you just THINK that your device might be unlocked, then I would not recommend to try flashing any other than an official ROM. Of course, it is your choice and you might want to take the risk. That risk is that your phone will become 'bricked' and won't start normally. The only way out of that situation is returning it to the seller to have it restored. Some people with a bricked phone however are able to restore it themselves with the original ROM, so make sure that you have that ROM available. Some original ROMs can be found on the internet, but not all of them.
sorry but you said
Upgrading itself can be pretty straightforward: just establish an ActiveSync connection, run the <ROM name>.exe from your pc and follow the instructions on your screen.
But if i want flash in my artemis a rom like this one Rom v2.00.02 PV for HTC Artemis ( Crossbow Style ) how can i do that?
Ther are no exe file inside but only one similar with bat extension??
Can you help me please
Thank you
Andreazzo
andreazzo said:
sorry but you said
Upgrading itself can be pretty straightforward: just establish an ActiveSync connection, run the <ROM name>.exe from your pc and follow the instructions on your screen.
But if i want flash in my artemis a rom like this one Rom v2.00.02 PV for HTC Artemis ( Crossbow Style ) how can i do that?
Ther are no exe file inside but only one similar with bat extension??
Can you help me please
Thank you
Andreazzo
Click to expand...
Click to collapse
Just connect the USB, let activesync make the connection and start the BAT file in the dir of the rom... wait 30min
grun said:
I guess you are new to all this upgrading stuff. First of all, and most important, is to find out whether your device is cid-locked or not. I think that it is safe to say that when you got your device through a telephone provider, like Orange or T-Mobile, at a very cheap price, then the device is locked and you should have it unlocked before flashing any ROM (except the official ones that you can download from your providers site). When you bought your device retail, at the full price (the Artemis is sold around 500 euro's), then the device is not locked.
Click to expand...
Click to collapse
Andreazzo,
Your Artemis, does it have a logo on the body. A logo from maybe T-mobile, Orange, Vodafone, O2 or whatever telecom provider?
If yes, the you shouldn't flash your device with v2.00.02 PV for HTC Artemis ( Crossbow Style ), because the chances are that you will brick it.
If your P3300 only has the HTC logo, then it is fully unlocked and you can flash whatever rom (flavor) you want for the Artemis.
So be aware of the fact. The life of your P3300 is in your hands.
This it is not probably true information. This it is not to end rule
My Artemis he had only logo on body. The logo of start take-off was the only HTC also. No trace T Mobile Orange O2 Vodafone. And I have brick. :{
I tried flash by bootloader however still announcement INVALID ID
Follow for voice grun. get rid (remove) CID - will not it be dust brick as I.
Read this ... http://forum.xda-developers.com/showthread.php?t=306904
Can anyone link me to a page where I can find all HTC Artemis Roms
TalhaQasim said:
Can anyone link me to a page where I can find all HTC Artemis Roms
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Artemis_DumpedRoms
Is the SEARCH button broken today?
hi there, i was wondering if you can help me solve my problem. im new to the o2 xda mini s phone. i just got this phone and its been flashed to wm 6. it keeps on freezing when i try to log onto msn or move items frmo my pc to the wizard.
is there anyway to fix it or better of to downgrade to its proper version. please reply promptly. thanks TIA
do you need any info on the phone? ill be happy to provide you if u can help me out !
jst a thought
one reason that you phone is freezing basically is that the wizards motherboard is not made to handle the wm6. its just like installing windows xp into a very old computer, the whole system lags down.
there is a way to downgrade it if you are interest. jst let me know.
I and a couple hundred or more people on here would probably beg to differ you on that opinion. I've been using windows mobile 6 on mine since just after it came out and I can't say as I've ever had a hardware related issue because of it. There have been a few software issues here and there, but they've always been fixed by someone on here.
I would guess that you may have an issue with an older version of WM6 and would probably be easily fixed with a newer version that you can find in the WM6 area of the wizard section. Before you go flashing anything though, do some reading in the stickies in the WM6 section to make sure you're flashing a new ROM correctly. There are 2 different versions of a wizard, a G3 and a G4 and each has it's own way of flashing. If you flash it incorrectly you could end up ruining your phone.
Mods, Developers, Seniors...
Anyone know how to get around with the Error 300 Invalid update Tool, problem?????
I think we can donate(maybe pay will be appropriate in this case ) to the developers who bring out a fix for it.
My Device gets only into the bootloader mode. When flashing the original ROM from DOPOD SEA WM6 WWE SHIP, it gets to the progress screen and @ 0% the RUU gives the Error 300.
Tried the SD Card flash method also, no luck!
I beleive the CID area is corrupt!!!
I had downloaded a tool to change the splash screen image, didn't used it, but by mistake the EnterBootLoader.exe (SPLJump) got executed and screwed the device
Been through the forum, but no help at all
Any takers?
nauman said:
Mods, Developers, Seniors...
Anyone know how to get around with the Error 300 Invalid update Tool, problem?????
I think we can donate(maybe pay will be appropriate in this case ) to the developers who bring out a fix for it.
My Device gets only into the bootloader mode. When flashing the original ROM from DOPOD SEA WM6 WWE SHIP, it gets to the progress screen and @ 0% the RUU gives the Error 300.
Tried the SD Card flash method also, no luck!
I beleive the CID area is corrupt!!!
I had downloaded a tool to change the splash screen image, didn't used it, but by mistake the EnterBootLoader.exe (SPLJump) got executed and screwed the device
Been through the forum, but no help at all
Any takers?
Click to expand...
Click to collapse
it may be original rom,but does it have correct cid
1.you can get right rom by registration at manufacturers site
2.you can download one from wiki or forum,but in this case you will have to cid unlock your device,you have to download artemis uspl from artemis upgrading thread and than flash any rom you want,just be carefull to flash a rom that is for artemis,because flashing any other rom will brick your device
3.uspl the device and flash the rom you mentioned
farukb said:
it may be original rom,but does it have correct cid
1.you can get right rom by registration at manufacturers site
2.you can download one from wiki or forum,but in this case you will have to cid unlock your device,you have to download artemis uspl from artemis upgrading thread and than flash any rom you want,just be carefull to flash a rom that is for artemis,because flashing any other rom will brick your device
3.uspl the device and flash the rom you mentioned
Click to expand...
Click to collapse
I have the original ship ROM "P800w_SEA_ENG_WM6_Upgrade_20070713", even that fails with the same error message.
My device is already unlocked using the artemis uspl and I have used several ROMs earlier!!!!
anyone with this fix? I am getting the same error on my friends artemis. No help hitherto solved the problem. I wish if someone could really get on to it & get me the solution.
corepda said:
anyone with this fix? I am getting the same error on my friends artemis. No help hitherto solved the problem. I wish if someone could really get on to it & get me the solution.
Click to expand...
Click to collapse
I sent my device to HTC service center and go it resolved. That is the only thing which worked for me after a couple of weeks searching in the forums and no solution. But the HTC SC buggers replaced my device entirely and gave me back an old **** device . So also keep this in mind. you won't be sure, if you get your original device back after the so called repair. HTC SC in India is super *****y, had a bitter experience!
Now I have moved to TD2, know that I was at loss, but am happy to have a shiny new TD2
Service Centre at Mumbai Sucks Big Tym....
HTC service centre at mumbai sucks big time....
they said they can't replair my cell n it has a HARDWARE ISSUE!!!
stupid lasses....
What can we do here getting the same error....
Tried MMC method, nothing!
HOW CAN THERE BE NO SOLUTION TO THIS PROBLEM??????????
no have solution this problem ???
stupid ! CID area !!! STUPID HTC ---
I just got a used HTC Universal. It had a generic WM5 install on it. I came here, looking for a WM6.x ROM. A couple years ago, I had great success doing this with an HTC Wizard (which I still have) -- I know how to flash a ROM. However, with the Universal, I am not having any luck.
The device comes up in bootloader mode just fine. But no ROM I have tried, ever boots up. I have tried the MTTY DOC format, I have tried using MaUpgradeUT, I have tried using the ROMUpgradeUT.exe that comes with the ROM's... nothing seems to work. If I understand the various posts here -- the device is acting like the Carrier ID is still set, and no ROM will work until I clear the CID and/or find a ROM that matches the CID. But, I thought that the MAUpgradeUT was supposed to clear out the CID? Is there another utlity for that?
I have spent basically 8 hours today, trying to get this to work... I am willing to ship this to someone in the US and pay $$$ to get it working again. It's a nice device (looks brand new) and I really want to use it. It was working just fine on WM5, until I got the bright idea to re-flash it.
Can anyone help?
hi again... found a copy of TML v8[1].7.1 21028 regular 64MB and IT WORKED!. My phone is no longer stuck in bootloader limbo.
however, this ROM seems to be hard-wired to look for a TMobile network? I have an AT&T GSM SIM... my phone isn't connecting to my provider, at the moment.
THanks to all for past and future help.
--- KSandbergFL
Closing thread as you solved your problem on other thread.
Please next time do not open multi threads for the same topic and we recommend you to not offer money as XDA is about helping and sharing, instead you can donate to the member who helped you