Sorry, for the noob-question, but Ive been searching this forum and all I found, is the statement, that Herald is Hardreseted the same way like wizard and that its written down in the wiki.
The wiki says "Press both softkeys". Since there are three softkeys (Commanager, Camera and voicetrainer) I'm a little confused right now.
Can someone provide with that information? Version for a 3-year-old preferred
Monarch73 said:
Sorry, for the noob-question, but Ive been searching this forum and all I found, is the statement, that Herald is Hardreseted the same way like wizard and that its written down in the wiki.
The wiki says "Press both softkeys". Since there are three softkeys (Commanager, Camera and voicetrainer) I'm a little confused right now.
Can someone provide with that information? Version for a 3-year-old preferred
Click to expand...
Click to collapse
SOftkeys are the two under the touchscreen.
It is called "softkey" because when on touchscreen it shows e.g. calendar - you can touch screnn or the two buttons under this = softkey
so left and right softkey =hold and then bush softreset button with stylos.
lol
Ummm...this explains a lot. Thank you...
Related
Hi all
Can anyone send me the following registry key (and subkeys) please (of the HTC TyTN / Hermes)
HKLM\SOFTWARE\Microsoft\Shell\Keys
I have a problem with my power button and I've discovered that some values are missing in this registry key.
P.S.: If possible, please send me the configuration from an original rom without any third party software.
Many thanks!
nero said:
Hi all
Can anyone send me the following registry key (and subkeys) please (of the HTC TyTN / Hermes)
HKLM\SOFTWARE\Microsoft\Shell\Keys
I have a problem with my power button and I've discovered that some values are missing in this registry key.
P.S.: If possible, please send me the configuration from an original rom without any third party software.
Many thanks!
Click to expand...
Click to collapse
Hopefully Keys attached
Mike
many thanks Mike
but "Button 6" configuration is missing... is that alright?
by default there is no configuration for this button?
nero said:
many thanks Mike
but "Button 6" configuration is missing... is that alright?
by default there is no configuration for this button?
Click to expand...
Click to collapse
Yes, until now I had not noticed that but that is indeed true on mine. I have also not carried out any customisation or even reset any of these buttons (well since last HR anyway)
Mike
Hi again Mike!
Ok, I've deleted the "HKLM\SOFTWARE\Microsoft\Shell\Keys\40C5" key and now the power button works perfectly.
I have wisbar advance 2 installed and probably, somehow I think, messing arround in his settings has created the power button mapping and that makes his behaviour anoying...
Maybe this is a solution for some other people with this problem. I've seen there are more people in the forum with the "power button problem".
Many thanks.
Power Button
Good news.
Had not seen others with the problem of the "power button" but if I spot them I'll link to here and by repeating power button problem hopefully searches will lead here!!!!
Mike
checkout this one here
people saying that need to do a soft-reset...
is what I have been doing when the power button get stucked and it is not anymore
nero said:
checkout this one here
people saying that need to do a soft-reset...
is what I have been doing when the power button get stucked and it is not anymore
Click to expand...
Click to collapse
Well now, I wonder!
Perhaps you could write up a detailed piece on exactly what was happening and then the exact detail of what you did/changed. I have a pretty good picture but if you get the time the old blow by blow account would be useful.
Cheers
Mike
going to bed now-enough problems for one day!!!
Mike,
sorry but I dont know exactly what you want to say with "old blow by blow account". My native language is not english and I dont know that expression.
I can say that my power/toggle screen button becomes "non responsive" in the past couple of days, sometimes works after 3/4 presses or after a long press but other times I need to do a sw reset pressing with the stylus in the reset button/hole.
What I did to fix this malfunction is what I've described in this thread's 5 post (here)
I've used resco's Registry Editor and deleted the key "HKLM\SOFTWARE\Microsoft\Shell\Keys\40C5" and all of it's contents.
Now the power/toggle screen button works perfectly!
If you need some more information, just do has one of our tv commercial
"explains it as if I am too much donkey"
Cheers,
Nero
I'm from Portugal.. same GMT, sweet dreams
Would this make it in a wizard too?
Hi guys, I have a wizard with the power button inoperant, everything else looks work fine... I tried several tricks given in the forums and those are great to power it off but not for turning on the phone niether the display on. Would this make it in the wizard too?
Luiggi, take a backup of your registry (Everyone should before registry editing), and just try it!
V
Hi Guys,
does anyone know how to reconfigure the video-call button (the little button above the green button). I don't use this one, en would like to give it another function)
Thx!
Thanks VJ
vijay555 said:
Luiggi, take a backup of your registry (Everyone should before registry editing), and just try it!
V
Click to expand...
Click to collapse
Thank you Vijay I took a look to the 8125 registry and is quite different, i´m afraid this wouldn´t work for the Wizard. I´ve tried also a couple of your programas (VJKeypress and VJEscahaton) but can´t help either, my problem is to turn the phone on (i´ve been using softreset during a connection to the power supply) and all indicates that this is a hardware issue... any thoughts?
Take a full backup (eg SPB Backup) then hardreset. Test if a clean rom still has the problem. If it does, it's a hardware issue, get it repaired.
Otherwise, if it's software, list what you've got or rebuild your installation.
V
It died like a hero....
vijay555 said:
Take a full backup (eg SPB Backup) then hardreset. Test if a clean rom still has the problem. If it does, it's a hardware issue, get it repaired.
Otherwise, if it's software, list what you've got or rebuild your installation.
V
Click to expand...
Click to collapse
I follow your advice and @ 80% of flashing stalls for awhile with the progress bar in red, after some minutes proceeded turning the progress bar in blue color and @ 95% progress I got ERROR326 : INVALID COMMAND "With the legend "This NBF file can not be used for your phone. Please check your NBF file" The screen was white with the 95% progress bar and lost connection with the PC, I tried a softreset and what I got was the tricolor scren with IPL / SPL data and RUU at the top right. I´m afraid that we have another G4 casualty...
And few hours later.......
I reflashed the phone with RUU_RIsidoro_2.26.10.2_WWE+CF2SP1_G4 this time it went to the 100% progress and the congratulation screen for a succesful flashing, however stalls in bootloader screen (this time without the RUU inthe top right), whenever I do a softreset (since the on / off button still is not working) The HTC innovation splash screen shows up, then disappears and my Wizard returns to the bootloader mode. I think I should be moving to the Wizard forums, thank you VJ!
I recently unlocked using v3a and I've noticed afterwards that my keyboard "special/function" (the blue dot in the lower left corner... dont know what its officially called) reassigned some keys. For example, when I press the blue dot and the key "A"... instead of inputting a ":" (which is what is written on the key in blue), I get a "_" (other examples include dot+Q = "!", dot+W = "@"). I tried flashing to att official wm6... as well as reflashing back to stock cingular wm5... the problem is still there. i know for a fact that it was working properly before I performed the initial unlocking.
If anyone has a solution for this, please let me know. It's not a huge problem, but is a little annoying. Thanks in advanced for any input.
I am a newb so please feel free to direct me to a thread if this answer has already been discussed (I ran a search but found nothing).
http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry
this might help
maximuz329 said:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry
this might help
Click to expand...
Click to collapse
Thanks so much... your link helped me fix the problem!
how did you fix? I've the same problem!
thanks
I've been searching around quite a bit but have been unable to find solutions for what I would like to do to my PPC.
I have a hermes running At&t wm5 with no intention of upgrading yet;
but my questions are:
1. I would like to change the icons of the programs in all of my menus such as start>programs and start>system>settings. I assume a program or patch, as well as a lot of work is needed. Any ideas how to go about doing this?
2. I want to change the 2 bottom soft keys on the today screen (phone/contacts) to Lock / Contacts. As in just hit my left hard or soft key to lock the phone.
Any help is much appreciated
(Also, sorry if this is the wrong forum)
Sirgatory said:
I've been searching around quite a bit but have been unable to find solutions for what I would like to do to my PPC.
2. I want to change the 2 bottom soft keys on the today screen (phone/contacts) to Lock / Contacts. As in just hit my left hard or soft key to lock the phone.
Click to expand...
Click to collapse
try the attached file for this... called softkey changer.
hey. thank you for the app! I tried it but unfortunately it did not have an option to place the device lock as a soft key.
so unfortunately both problems are still left unsolved =/
I would like some help.
Part of my Prophet screen doesn't work anymore.
This means aligning is hell.
I would like to squeeze some more life out of the thing ...
Especially with guys like Gullum, Cloudifa, and all the other ones ...
I have already found out the registry key is
HKLM\HARDWARE\DEVICEMAP\TOUCH\Calibration settings
I have only found values for elf, atom and others on the net.
But they are not yet as close to Prophet (atom is OK except for the far right side of the screen (scroll ...)
Could someone please be able to give me the values on their prophet ?
Want to post it instead of messaging directly to keep this on the forum for others.
If I should have missed an earlies posting woth the settings, sorry, please then redirect me.
dkleuven said:
I would like some help.
Part of my Prophet screen doesn't work anymore.
This means aligning is hell.
I would like to squeeze some more life out of the thing ...
Especially with guys like Gullum, Cloudifa, and all the other ones ...
I have already found out the registry key is
HKLM\HARDWARE\DEVICEMAP\TOUCH\Calibration settings
I have only found values for elf, atom and others on the net.
But they are not yet as close to Prophet (atom is OK except for the far right side of the screen (scroll ...)
Could someone please be able to give me the values on their prophet ?
Want to post it instead of messaging directly to keep this on the forum for others.
If I should have missed an earlies posting woth the settings, sorry, please then redirect me.
Click to expand...
Click to collapse
These values are unique to each device. If every device was the same, there would be no need for this!
From my ROM setup: 1839,1997 3118,684 3126,3328 577,3291 602,690
Thanks !
I know about the unique settings, but with your prophet settings I can try to come closer thn woth settings fora completely different device, and maybe tweak a bit more myself through remot registry editor.
Thanks again!
HKLM\HARDWARE\DEVICEMAP\TOUCH\Calibration settings
1942,1963 3228,622 3197,3268 664,3267 675,653
Device G3
Rui
pls help me.... pls
were i found this "HKLM\HARDWARE\DEVICEMAP\TOUCH\Calibration settings'' ?
jhonnyyy said:
were i found this "HKLM\HARDWARE\DEVICEMAP\TOUCH\Calibration settings'' ?
Click to expand...
Click to collapse
You need a registry editor. If you just want to realign the screen, hold the windows hardware button and then press the centre d-pad button.
salll
tnx...but my PDA doesn't allow to finish the align screen process, one of the corners i can't align it...maybe phisical problem???
jhonnyyy said:
tnx...but my PDA doesn't allow to finish the align screen process, one of the corners i can't align it...maybe phisical problem???
Click to expand...
Click to collapse
Maybe a hardware issue...
Try using a registry editor (I'd use this) to edit the settings using those above... May not be perfect but may help....
Hi, is there any program or tweak to add one or more new softkeys on the bottom bar besides the original left and right softkeys?
The new softkey can be associated with different shortcuts for quick program loading/menu display/convenient operations on different programs' interface, (not just today screen). So it will give users an easy DIY method to improve some programs' users interface.
Thanks!
twfx said:
Hi, is there any program or tweak to add one or more new softkeys on the bottom bar besides the original left and right softkeys?
The new softkey can be associated with different shortcuts for quick program loading/menu display/convenient operations for different programs. So it will give users an easy DIY method to improve some programs' users interface.
Thanks!
Click to expand...
Click to collapse
There are many great programs able to do what you want, welcome to the forums, please refer to this link for search results to get you start on the road to answers, it's not hard to use the search button before posting a new thread, okay
snachez said:
There are many great programs able to do what you want, welcome to the forums, please refer to this link for search results to get you start on the road to answers, it's not hard to use the search button before posting a new thread, okay
Click to expand...
Click to collapse
--------
I did have done the search work quit a long time before posting this thread.
Actually I know lots of ways to re-map the softkeys and hard buttons. I also found the solution to add new options in the softkeys' menu list.
But my question is to ADD one/more new SOFTKEY. I do appreciate if you can just confirm me that you do have seen any solution for my question. Then I will do the search work harder but hopefully .
Thank you for your reply.
I have no answer for your problem but I am using BatteryStatus that allow to configure icons in the bottom of the screen.
Go here: http://www.chi-tai.info/cs_batterystatus_xda_neo_wm5_ext_im_cs.htm
Cassatta said:
I have no answer for your problem but I am using BatteryStatus that allow to configure icons in the bottom of the screen.
Go here: http://www.chi-tai.info/cs_batterystatus_xda_neo_wm5_ext_im_cs.htm
Click to expand...
Click to collapse
---
Thank you!
Actually I know SKMenu can do this job, in some way. I am seeking a simple solution/program, which is more flexible and powerful for the above-mentioned purpose.
a far as i know there is no way for that. but if you need so much buttons i would use one of the many launchers.
Wisbar Advance 3 can show one more Button, I think!