Related
Hi, got some problems with one of my employes Herald (not simlocked or anything).
It ended up on my desk after complaints about it rebooting by itself every minute or so. I figured I could sort it out by upgrading to wm6. Wen to HTCs website and downloaded the official RUU (HTC_P4350_SVE_4.17.413.2_4.1.13.44_02.94.90_Ship.exe). Everything went along fine and I left it upgrading on my desk and went for lunch.
When I got back it said that the update had failed and I followed the recover function but without success.
Now Im stuck in bootloader mode, and when I try to update it again the current image version is listed as blank and I get to about 1-2 percent before it shuts down and gives "ERROR [244]: INVALID MODEL ID".
Any suggestions on what to do?
Further information...
IPL 4.17.0001
SPL 4.17.0000
When i do a hard reset, after it says format complete it boots up and freezes with a green gradient across the screen.
You can try using USPL or HARDSPL to flash.
The USPL will get around CID locks
This is from ivan's A Herald's Guide to Flashing Aserg, USPL and HARD-SPL - xda-developers
II. How do I flash an NBH file?
Warning: To use the NBH ways, you MUST have a SPL of 4.0 or higher. If you have a lower SPL, you WILL brick your phone.
a. USPL
Step 1. Download Herald-USPL-Beta3.
Step 2. UnZIP the file into a folder on your Desktop. Let's call it "MyFirstROM" for simplicity's sake. Notice that there is a folder called RUU within this folder now. Keep that in mind.
Step 3. Download your NBH file and unZIP or unRAR it into that RUU folder. Make sure that that NBH file ends up in the RUU folder, not within a folder inside the RUU folder.
Step 4. Place your phone into flightmode.
Step 5. Go back to the MyFirstROM folder and then run USPL.exe
Step 6. Follow the directions on the screen. EXACTLY.
Your screen on your cell phone will go white around the 75% part of the "second step" now.
ActiveSync will LOOSE its connection.
Step 7. One step 3 on that black window, the RUU flasher will pop up. Just follow the steps.
That's it. Welcome to the flasher's world.
Thanks for the reply,
First, I cant get activesync to find the phone, only evidence of contact in between the phone and PC is that its listed as [Windows CE USB Devices+PocketPC USB Sync] in device manager. I tried to uspl flash with ASERG.8, and it stops at "STEP 1/3...."
I downloaded mtty to see if it could connect, and it did.
Any further suggestions on what might work!
uninstall..reset.. clean install would probably get activesync to work w the phone..
Reinstalled activesync without any change. And soft/hard reseted everything…
Tried to flash via sd as per instructions in another thread, got to "checking SD contents" and then straight to triple-color bootloader.
Help me please! ;D
Cant help getting the feeling that Im completely screwed...
Cant get activesync to recognize it, only way to get it to light up is via bootloader (camera + reset button), everything ive tried to flash it with hangs almost instantly.
As a complete novice my guess is that the current rom is corrupted and I badly need advice on how to go on. The sd-flash seems quite logical but I cant get it to work. Ive tried to overwrite my sd with 00-values in winhex and then placing the original ruu [HERAIMG.nbh] (through windows, is there a way to write data with winhex?) on the card without any success.
Any suggestions on what to try is much appreciated.
Sounds like the SPL got corrupted or partially written only... sorry. Repair center time. You can also placing your Stock RUU's nbh file into your SD card and renaming it to... umm.. I forget... and then flashing FROM the phone.
facdemol said:
You can't simply place the rom file to the card and hope the device will read it in this way. In my time working for pda service, we used WINHex to format the card (to RAW-unformatted) and then we wrote the rom file in RAW format to the card. Your card looks like an endless stream of hexazecimal values. Only winhex recognises this format, if you insert the card to the computer, it will simply ask you to format it. After inserting this card into the pda, it will start the upgrade . The order of this operation was, as I remember, to fill the card with 0000 values (there is an option in WINHex, a kind of format) then write the rom file to the card in RAW mode. Then insert the card to the device.
Click to expand...
Click to collapse
Thanks for the reply, before giving up and sending it in for repair I would like to give the sd-flash a proper try... So far Ive managed to format the card with winhex but I cant really figure out how to write to the card in raw format. Could anyone point me in the right direction?
i managed to do the steps said above ... formated the card in RAW format etc but still the phone won't turn on ... it will only stay in bootloader ...
diabolic53 said:
i managed to do the steps said above ... formated the card in RAW format etc but still the phone won't turn on ... it will only stay in bootloader ...
Click to expand...
Click to collapse
Care to enlighten me on how you did that?
I've been reading a lot lately.. I wonder if the phones are savageble... something about flashing but bypassing the radio check... Also, the universal has an RUU that bypasses any checks before it flashes... this would be great for us to have... I'm asking around...
g4rwin said:
Care to enlighten me on how you did that?
Click to expand...
Click to collapse
whell i opened the mem card with winhex filled all the blocks with 00 and then i opened the nbf file also with winhex and copied the content in hex format on to the card ....but still no success ..
ivanmmj said:
I've been reading a lot lately.. I wonder if the phones are savageble... something about flashing but bypassing the radio check... Also, the universal has an RUU that bypasses any checks before it flashes... this would be great for us to have... I'm asking around...
Click to expand...
Click to collapse
if you find it please tell us about it cos a lot of phones are getting bricked ...
If I'm correct, you told us a few post above thisone you placed your SD card with the imghera.nbh and got "checking sd conents" and then it went to bootloader.
As far as i can recall you need to get your Herald into bootloader first and then place your SD card with the IMGHERA.nbh file on it. Then it should start reading the image from, your SD card.
Judging from your first post you haven't been using the asigned RUU from the HTC website if this was your first rom flash to WM6 and you got a vendor error. Try to convert and use that one when you flash from sd card.
jappo01 said:
If I'm correct, you told us a few post above thisone you placed your SD card with the imghera.nbh and got "checking sd conents" and then it went to bootloader.
As far as i can recall you need to get your Herald into bootloader first and then place your SD card with the IMGHERA.nbh file on it. Then it should start reading the image from, your SD card.
Click to expand...
Click to collapse
Ive tried all possible ways, if I pop the sd card in while already in bootloader, nothing happens at all.
jappo01 said:
Judging from your first post you haven't been using the asigned RUU from the HTC website if this was your first rom flash to WM6 and you got a vendor error. Try to convert and use that one when you flash from sd card.
Click to expand...
Click to collapse
Ive been trying to flash with the WM6 RUU I downloaded from HTC's site (the one that bricked it) since that is the only local (swedish) and official one I could find. Have I misinterpreted it all and the only thing that could do the trick for me is WM5.1?
Ive also been trying to contact the HTC service dept for over a weeks time ending up in a deadend overfilled voicemailbox - meanwhile my warrantyperiod ran out... Any suggestion on what to do?
duprade said:
You can try using USPL or HARDSPL to flash.
The USPL will get around CID locks
This is from ivan's A Herald's Guide to Flashing Aserg, USPL and HARD-SPL - xda-developers
II. How do I flash an NBH file?
Warning: To use the NBH ways, you MUST have a SPL of 4.0 or higher. If you have a lower SPL, you WILL brick your phone.
a. USPL
Step 1. Download Herald-USPL-Beta3.
Step 2. UnZIP the file into a folder on your Desktop. Let's call it "MyFirstROM" for simplicity's sake. Notice that there is a folder called RUU within this folder now. Keep that in mind.
Step 3. Download your NBH file and unZIP or unRAR it into that RUU folder. Make sure that that NBH file ends up in the RUU folder, not within a folder inside the RUU folder.
Step 4. Place your phone into flightmode.
Step 5. Go back to the MyFirstROM folder and then run USPL.exe
Step 6. Follow the directions on the screen. EXACTLY.
Your screen on your cell phone will go white around the 75% part of the "second step" now.
ActiveSync will LOOSE its connection.
Step 7. One step 3 on that black window, the RUU flasher will pop up. Just follow the steps.
That's it. Welcome to the flasher's world.
Click to expand...
Click to collapse
Hi I try tu patch IPL/SPL with hard spl but with error, now my herald stuck in boot mode. IPL/SPL 1.09.0001. He probbably is from some russia operator (rusian diacritics on keyboard).
How can I try to make him alive?
Hello!I had find the version 1.17 of a firmware for this device but when i try to flash it it gives me an error the device id doesn`t match so the problem is how can i flash this ROM if it keep given me this error?my device is form italy and the ROM is from uk if it helps..or maybe someone can post here a newer version then 1.15 wich i have so i can flash my device or maybe someone cand make a new thread and poast all official ROM`s there and versions that will be very usefull...
I can help in a PM
Profy_X said:
Hello!I had find the version 1.17 of a firmware for this device but when i try to flash it it gives me an error the device id doesn`t match so the problem is how can i flash this ROM if it keep given me this error?my device is form italy and the ROM is from uk if it helps..or maybe someone can post here a newer version then 1.15 wich i have so i can flash my device or maybe someone cand make a new thread and poast all official ROM`s there and versions that will be very usefull...
Click to expand...
Click to collapse
How'd you find that ROM? Is it one of those floating on this forum?
thenext1 said:
How'd you find that ROM? Is it one of those floating on this forum?
Click to expand...
Click to collapse
you can find it on this forum if not please PM me
cmonex said:
I can help in a PM
Click to expand...
Click to collapse
I have send you a PM hope you will replay as soon as you can
hi
i have same problem, i have a german S740 but when i try to flash the orange or asia rom from this forum it says that it's not possible cause it's not made for this phone... don't understand why... even one of the official hotfix from htc gives me error saying that it's not for my phone...
anyway, how can i flash the orange rom? is it possible?
....this problem is not too big - you must have Rose GoldCard.
Then you can upgrade any Rose shipped ROMs.
thanks, now i understand.
Can anybody give me the goldcard IMG if i give my sd card CID?
I can try it - sent Card ID
Tomorrow I'll try upgrade my S740 to Orange. Hopefully will live
Elusivo said:
thanks, now i understand.
Can anybody give me the goldcard IMG if i give my sd card CID?
Click to expand...
Click to collapse
someone tell me that a goldcard is a card not a file .i wander if a sd card put in the IMG can work .
Elusivo said:
thanks, now i understand.
Can anybody give me the goldcard IMG if i give my sd card CID?
Click to expand...
Click to collapse
someone tell me that a goldcard is a card not a file .i wander if a sd card put in the IMG can work .
...if you have .img GoldCard file, you must:
1. Download HxD Hex Editor and run
2. Go to Extra tab > Open Disk. Under Physical disk, select Removable Disk (Must be your SD card), uncheck “Open as Readonly), click OK.
3. Go to Extra again, Open Disk Image, open up goldcard.img which you’ve saved/unzipped earlier.
Now, you should have two tabs, one is your removable disk, the other is goldcard.img. Press OK when prompted for “Sector Size” 512 (Hard disks/Floppy disks), click OK.
4. Click on goldcard.img tab. Go to Edit tab > Select All, edit tab again > copy.
5. Click on the “removable disk” tab. Select offset 00000000 till offset 00000170 (including the 00000170 line), click on Edit tab and then Paste Write.
6. Click on File > Save. now you can exit the program.
7. Reboot your phone with this SD Card (now GoldCard) inside
Flash Rom or original Rome
I have received yesterday a HTC S740 Black Rose! But I chose the menu nicht.Ich would like like like other HTC Touch or HTC P3700 with the Black Theme (Original from HTC) can someone help me there? I would not necessarily WM 6.5 haben.ich thank me already times in advance!
But the ROM must be in German: D
I got an Uk Orange S740 HSPL by jockyw2001 and i need it to be flashed with Russian Custom ROM, but when i do so it says "your os rom isn't customized for your hardware" can i use goldcard to make it work and what is the algorythm for Rose?
Hii i have elfin and not unlocked my elfin but still i can load any rom in my elfin have loaded 6.1,6.5,and many more.
Want to know will be posting procedure to SAFELY can be loaded in to your HTC MOBILE
miteysh.
mitesh20360 said:
Hii i have elfin and not unlocked my elfin but still i can load any rom in my elfin have loaded 6.1,6.5,and many more.
Want to know will be posting procedure to SAFELY can be loaded in to your HTC MOBILE
miteysh.
Click to expand...
Click to collapse
can u please put a little more light on this
mitesh20360 said:
Hii i have elfin and not unlocked my elfin but still i can load any rom in my elfin have loaded 6.1,6.5,and many more.
Want to know will be posting procedure to SAFELY can be loaded in to your HTC MOBILE
miteysh.
Click to expand...
Click to collapse
couple of questions I wanna ask u..
1. when u bought ur device was it a brand new one or a used one??
2.are u sure ur device is not locked?? did u check you your IPL??
3.what is your IPL/SPL compination??
hope that's not much.. thanks
and by lock, are we talking about cid-lock or sim-lock?
crapula512 said:
and by lock, are we talking about cid-lock or sim-lock?
Click to expand...
Click to collapse
Yeahhh... i was thinking about it too
Answers!!!!!!
I bought my elfin in the year 2008.
not knowing how to use after few months i flashed elf rom and found that my device was restarting and of no use....
i learned about unlocking from this website after seating hours and hours.
i have gsm one.
elfin.
How to flash any rom...
I have original rom loaded and with ipl/spl of 2.xx
but now i have ipl/spl 3.14.com.
loaded more that 100's of roms of 6., 6.1, 6.5.
any rom.
first of all you need to know your device configuration to load any rom.
if you have detailed configuration then you can load it.
currently loaded wm6.5 28011 onyx. rom.
radio : 3.34
procedure!!!!!!
i will be enclosing the safe procedure for flashing...
no worry.....
you will learn to load and make your own flash...
give to few days time..
mitesh20360 said:
I have original rom loaded and with ipl/spl of 2.xx
but now i have ipl/spl 3.14.com.
loaded more that 100's of roms of 6., 6.1, 6.5.
any rom.
first of all you need to know your device configuration to load any rom.
if you have detailed configuration then you can load it.
currently loaded wm6.5 28011 onyx. rom.
radio : 3.34
Click to expand...
Click to collapse
if your spl says spl 3.14.com.... it means you have done HSPL... and thats the normal thing everybody do to go in for safe cookedroms flashing..
sorry bro there is nothing special about your case
opss!!!
but i have changed he ipl/spl/radio/flashed/many roms/ changed pagepool file/ all that can brick a fone..
i have recently edited the onyx rom 6.5 28011 and flashed for my htc
if you want you can also just i will put links n procedure to flash the rom.
ok. so will you put the links to the procedure. well coz after upgrading ur spl/ipl you can flash any rom you want.
reply
srgudhka said:
ok. so will you put the links to the procedure. well coz after upgrading ur spl/ipl you can flash any rom you want.
Click to expand...
Click to collapse
well
i not that i can load any rom my making rom.
like wise any specific rom i s made for specific mobile so as i make any rom specific for my mobilbe and even fon's battery level is 10% then also i can easily flash rom its in secs. and easily configure my cell easily..
mitesh20360 said:
well
i not that i can load any rom my making rom.
like wise any specific rom i s made for specific mobile so as i make any rom specific for my mobilbe and even fon's battery level is 10% then also i can easily flash rom its in secs. and easily configure my cell easily..
Click to expand...
Click to collapse
rather than keeping it a secret you should share your knowledge. everyone know one can cook a rom and flash it on his mobile. i suggest please be clear with your english.
no secret
sorry for my bad english.....
give me few days i will have to give link to software and procedure.
if any thing goes wrong with procedure then cell will brick and have hard format with no data in it.!!
so
its not any secret it is for knowledge.......
any can do it...!!!
Procedure for flashing (how i am flashing rom)
I have phone elfin 128mb ram.What you want softwares:
1) device info software for information regarding your device.
2) rom extractor... htc rom image editor version 0.4.0.51
AnDim
3) ROM builder. With this tool you can build a ROM (*.nbh)
from a rom parts (*.nb) in a comfortable interface.
by - Alexander "Dark Simpson" Simonov.
you can flash rom compatible with your CID (country/caller id) i.e. rom that you are going to flash must have cid of your phone.
steps:
Connect your Phone and establish Activesync Connection
find following for flashing:
Device ID : ELF0******
CID : ur cid. of phone.
GSM.nb radio file
IPL_H3.nb ipl h3 file
OS.nb os file extracted from built rom.
SPL.nb spl file
For deviceID you need to have software called deviceinfo.exe
http://forum.xda-developers.com/showthread.php?t=418892&page=18
download link: http://forum.xda-developers.com/attachment.php?attachmentid=129675&d=1258726424
then download any rom say onyx 6release. latest.
http://www.mediafire.com/?vjey0kz5ng0
then you will get RUU_signed.nbh
extract OS.nh from RUU_signed.nbh
save to one folder.
then you will need.
GSM.nb radio file
IPL_H3.nb ipl h3 file
SPL.nb spl file
extract same from follwoing links:
radio: http://forum.xda-developers.com/showthread.php?t=527048
choose as per yuor choice.
same extract
GSM.nb from *.nbh and save to folder.
similarly do for ipl/spl.
so you have following files needed for making your compatible rom:
IPL_H3.nb ipl h3 file
SPL.nb spl file
GSM.nb radio file
OS.nb os file extracted from built rom.
Step 2:
Now make rom for your elfin
you need to have software called
ROM builder. With this tool you can build a ROM (*.nbh)
from a rom parts (*.nb) in a comfortable interface.
Alexander "Dark Simpson" Simonov
link:http://www.real-radio.ru/htcrt/download/htcrt.zip
download the tool run in your pc, a pic that i have attached of that software.
then
run htcrt.exe
then start,
then ROM builder,
choose ur phone.
in that choose the relevant options for your phone/requirement
put Model ID:, Country ID:, Version: 3.14.706.02
language:WWE
firmware contents:
load all that you have stored in your folder the files you want.
IPL_H3.nb ipl h3 file
SPL.nb spl file
GSM.nb radio file
OS.nb os file extracted from built rom
then press
Build!
you will find that you have give name to your file named it
RUU_signed and it will make rom for your phone.
after it is completed it shows everythings seems to be ok
then close you have build your own rom compatible with your mobile.
RUU_signed.nbh
now flash it to your mobile.
how will you?????
steps:
have custome ruu files in one folder
following files must be there:
RUU_signed.nbh
EnterBootloader.exe
ErrorBattery.fig
ErrorUSB.fig
ModelID.fig
rapitool.exe
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
Temp.bat
then run
ROMUpdateUtility.exe..
must connect your phone through usb.
start your phone pressing camera key you will see triple colour screen showing ipl/spl/
blue,green,red.
flash it from pc.
after every thing is over your will get message update complete.
your will get your rom flashed. but every data before flash must be back up.
this is bit lengthy but easy to use and flash....
if found probs reply me
well good one. tried it. works. but this is a lengthy process. rather dont you think cid unlocking it once will allow you to flash as many roms as you want. once you have unlocked it you just need to a custom ruu and a rom file. thats it. rest you know how to go about. i appreciate your method.
edit: wrong post - plz delete
Salve! I have a SIM lock Elfin KPN Netherlands. You can unlock? Not allow me to rewrite the IPL and SPL.
My device can not boot and knacked on boot, only the backlight on. I try to hardreset (master clean) for many times but it still sitting NTT Docomo-JP ROM (Toshiba-UKROM), screen bright, no repsonse.
Please help me!
The same problem here: http://www.modaco.com/content/toshiba-tg01-tg01-modaco-com/303893/tg01-knackered-on-boot/
minhanh_tran said:
My device can not boot and knacked on boot, only the backlight on. I try to hardreset (master clean) for many times but it still sitting NTT Docomo-JP ROM (Toshiba-UKROM), screen bright, no repsonse.
Please help me!
The same problem here: http://www.modaco.com/content/toshiba-tg01-tg01-modaco-com/303893/tg01-knackered-on-boot/
Click to expand...
Click to collapse
Try short pin method. That normally work.
bojan6 said:
Try short pin method. That normally work.
Click to expand...
Click to collapse
Could you explain? Plz tell me the way?
I tried to update UK ROM and JP ROM but it still stood at Toshiba logo or NTT Docomo logo.
If you take your sim card out, look closely, that is a black label, where the sim would be, peel it up, and you will see some pins
You can find more information on this forum
http://forum.xda-developers.com/showpost.php?p=5407611&postcount=326
I had loaded UK ROM, FR, DE, IT, RO.. rom before, but it stood at Toshiba logo, sometimes, in process loading ROM, it shows "NAND error". I have found in many websites, it must to be loaded eboot (IPL) again. So I want to ask how to make eboot and how to load it back to my device? Thanks for all your help!
Help us to slove the problem with Toshiba logo flashing at startup? I can't find the way to pass!
？
can you download the ENG ROM to your T-01A?
As I know, the japanese TG01(type t01a) can only use japanese rom.
can you tell me how you download the ENG ROM to your T-01A?
Any solution? Toshiba logo flash at startup?
？
I dont know what you mean.
It stand at Toshiba (logo) letter and does not come Orange logo.
I have tried many way (hard reset, flash other ROM - FR, IT, UK, DE..) but it doesn't work, start at Toshiba (DOCOMO) letter.
I find the reason that it need to write over Eboot, IPL to normal boot. Sorry for my poor English.
Post #92: http://forum.xda-developers.com/showthread.php?t=647512&page=10
why not you flash back to japanese rom?
I think you have a t01a ,right?hh
yes, stepw help me to use UK ROM and flash via sddl+, I used UK ROM to test for 1 month but it refuses to boot after I install other Keyboard software
@minhanh_tran
get a original update rom for you phone T01A_to_SP50_wm65.exe
use 7-zip to extract T01A_to_SP50_wm65.tsd
erase all data on sd card.
make a prg folder sd card
copy T01A_to_SP50_wm65.tsd to prg on sd card
rename on sd T01A_to_SP50_wm65.tsd to T01A_to_SP50_wm65.enc
remove stripe under sim.
secure the battery in place with duct tape so it will not fall out.
power the phone.
shortcut pin 1 and 3 an press reset.
release reset
keep shorting pins 1 and 3 for couple of seconds.
stop shorting and turn the phone with screen up.
now you should have white screen with text on it announcing that flash is downloading into phone.
if you cannot get white screen your phone firmware is corrupted and is nothing to do then send it to warranty.
if you get NAND error while flashing is probably because your NAND flash chip is defective and can't store data on some part of it. i suspect that is the case and that cause initial malfunction (if it happened without you flashing anything). in that case your only option is warranty as the chip must be replaced.
if you still want IPL you could use my tgtool do dump it from original rom.
however i doubt that you have the tools and maybe know how to JTAG cpu and load IPL directly.
@cedesmith
get a original update rom for you phone T01A_to_SP50_wm65.exe
use 7-zip to extract T01A_to_SP50_wm65.tsd
erase all data on sd card.
make a prg folder sd card
copy T01A_to_SP50_wm65.tsd to prg on sd card
rename on sd T01A_to_SP50_wm65.tsd to T01A_to_SP50_wm65.enc
remove stripe under sim.
secure the battery in place with duct tape so it will not fall out.
power the phone.
shortcut pin 1 and 3 an press reset.
release reset
keep shorting pins 1 and 3 for couple of seconds.
stop shorting and turn the phone with screen up.
now you should have white screen with text on it announcing that flash is downloading into phone.
All the steps I have passed.
Sometime when I flash T01A ROM it say NAND error. I live in Vietnam so I can not send to JP to repair it.
if you still want IPL you could use my tgtool do dump it from original rom.
however i doubt that you have the tools and maybe know how to JTAG cpu and load IPL directly.
Please show me how?
yep
cedesmith give a detailed solution,I think you should have a try,and feed back the news.
But I can not believe you flash a UK rom to T01A directly and use for a month without problem.....unbelievely.....
and some question to cedesmith:
I want to get out a rom from a HONGKONG tg01,that have not simlock,maybe useful for us all
bird_9527 said:
cedesmith give a detailed solution,I think you should have a try,and feed back the news.
But I can not believe you flash a UK rom to T01A directly and use for a month without problem.....unbelievely.....
and some question to cedesmith:
I want to get out a rom from a HONGKONG tg01,that have not simlock,maybe useful for us all
Click to expand...
Click to collapse
You can see it. The IMEI will tell you! After bird_9527 see the pics, I've removed it because I don't want to pulic my IMEI!
tgtool -t01a -dc T01A_to_SP50_wm65.tsd
or
tgtool -tg01 -dc TG01WP_5005000176.tsw
??
that mean you only change the UK ROM the .tsw filename to .enc filename, using sddl+ and then you can flash UK ROM to T01A?
?
cedesmith said:
tgtool -t01a -dc T01A_to_SP50_wm65.tsd
or
tgtool -tg01 -dc TG01WP_5005000176.tsw
Click to expand...
Click to collapse
I want to upload a ROM file from a TG01,can I?
When i put on my Herald stop in bootloader.....
When i try to flash from SD, my Herald says:
-----
Checking SD Contents
Invalid Certificate
Press Any key to continue
-----
What happened?
how to solve?
I can not even with RUU
ilp 1.08.0001
spl 1.08.0001
Help me!!!
1.Connect the pc and download original rom.
2.Run RUU on your pc and flashig phone
other
1. download original rom
2. unpack the original shipped rom (winrar)
3. extracking ruu_signed.nbh
4. rename ruu_signed.nbh to heraimg.nbh
5. format storage card winth fat32
6. copy heraimg.nbh
7. insert the card in pda and run in bootloader mode
I have a few things for you to consider. The first is your IPL and SPL numbers. Your numbers are 1.08.xxxx You should start by searching for a safe method for flashing your phone based on such a low IPL (if there even is a method). From what I understand, in order to flash these custom roms you MUST be HardSPL'd.
Click here for PDF instructions
If you do not have an IPL of 4.xx.xxxx or higher then you cannot HardSPL your herald.
I assume that because you are not HardSPL'd with the security fix not in place you are unable to flash anything other than a stock rom. My suggestion is to look for an OEM or stock rom update that can hopefully get you to a higher IPL/SPL number. I know that my service provider (t-mobile) has a download available for the wing so look into that first.
Hopefully another member can clarify if you can or cannot flash a custom rom with an IPL as low as yours. I hope this helps in some way. Good luck.
-Dan
I just sorted my phone
hi,
if you haven't fixed your issue yet,
the best way is to have a good read of the two discussions i've given below. both require you to have a working windows mobile device. it could even be a PDA.
using which u need to create a goldcard.
i suggest you use the qmat method as described in this post
forum.xda-developers.com/showpost.php?p=3224093&postcount=100
either ways, read the forums fully, then see what you can do. one of these will work for sure, once you get the gold card created, u can load any rom, the original or even a higher one from htc herald.
the urls u need to review are
forum.xda-developers.com/showthread.php?t=417930
forum.xda-developers.com/showthread.php?t=572683
this will help you get your phone back... if its loading into bootloader, it means ur phone can still be saved.
ps copy and paste the above links