Related
I cannot install GPRS Monitor from myO2 CD, it says i need to update my ROM, i did a corporate install btw
Anyone else had any probs?
Another forum member had this same problem when installing the ClearVuePDF Reader also supplied by o2 as part of the HTC application suite. He has the MDA, but flashed with the o2 Exec ROMs and then installed in Corporate mode.
From work we did together, it appears to be just the install program that was not validating his device. When I tried a hard-reset and Corporate mode install, I had no problems installing. However, its beginning to look as though a hard-reset does not totally clear the Exec's memory. In his case, I found all the individual files and registry settings needed for ClearVuePDF to run and he copied those to the device. Runs perfectly for him like that.
So I'm afraid you'll have to find somebody with the o2 version of GPSMonitor installed and get them to determine all the files/locations and registry-settings needed to get it to run. Unfortunately I don't have a GPRS connection or GPRSMonitor installed.
Just a thought. Have you yet tried a full o2 Personal mode install on your device? It just might be this action that puts 'something' in memory that is not cleared by a hard-reset, and that 'something' might be what the install program is looking for.
Sorry that I can't be more helpful.
No problem thanks for your help
dazzled said:
I cannot install GPRS Monitor from myO2 CD, it says i need to update my ROM, i did a corporate install btw
Anyone else had any probs?
Click to expand...
Click to collapse
I did a basic install and I get the same error. Sorry, Not much help though.
Daz
Me too. The ClearVuew PDF reader is rubbish! Text misalighed all over - Adobe with pixel doubling is better than this.
Please try this
Could one of you having a problem to install the o2 supplied GPRSMonitor, please try installing the attached .CAB after copying it to your device.
This CAB is extracted from the CD-ROM install program, so hopefully skips the validation stuff. With luck you might be able to get around the failed validation by installing from this CAB.
Note: Even if asked to install to Storage Card, the o2 supplied version (2.3.0 build 600) puts very little there, most goes into device memory. The current version 2.41 from spb will obey the instruction to install to SD-Card, but wasn't reliable when run from there - the monitoring part aborted four times in 10-minutes whilst I was playing with it.
Unfortunately, since I don't have the install problem, I can't test this install out.
It works a treat. Thanks muchly!
Ward said:
It works a treat. Thanks muchly!
Click to expand...
Click to collapse
Am I glad about that - I was in the midst of trying to locate all the files/registry entries needed for a manual install.
Perhaps I can go to bed now! :wink:
I also managed to 'locate' another copy and it works fine, thanks for all the help.
astage said:
However, its beginning to look as though a hard-reset does not totally clear the Exec's memory.
Click to expand...
Click to collapse
I can confirm this but with other files. After several hard resets (even with the clear storage icon), the pictures I had taken were still there.
Tron_Of_Borg said:
astage said:
However, its beginning to look as though a hard-reset does not totally clear the Exec's memory.
Click to expand...
Click to collapse
I can confirm this but with other files. After several hard resets (even with the clear storage icon), the pictures I had taken were still there.
Click to expand...
Click to collapse
Ouch! I didn't realsie it was as bad as that.
The situation is made worse by the backup program I'm using (Sunnysoft Backup Manager) not backing up all the data and settings. Neither does it perform a true restore - just merges the backup with what's there after the hard-reset.
Unfortunately, I'm used to HP's backup applet from the Jornada 928; which performed a total backup/flush restore. Are there any other applets for WM5/universal that really performs a full backup/restore?
Does anyone have this cab please? I have just bought a new O2 exec and am having the same problem with it saying my ROM version is too old!!
sorry ignore that post! Work computer blocked the file out
I am running my XDA EXEC in basic mode. When I tried copying the .cab file to my device and running it from there , still get the problem.
Any suggestions ?
I was running personal mode then switched to basic mode, could this cause the problem.
Thanks for you replies in advance.
Cannot remove GPRS monotr app
I installed this file to test it out om M3000. Unfortuntely I cannot seem to uninstall it now! It doesnt show up in my Program list - How do you uninstall it?
I looked in the \\windows folder and removed all files and shoretcuts I could find, but its still showing up on my 'today' screen with an error.
Any ideas? The registry?
Cheers
rob
Linuxgeek:
I was also getting the ROM version problem installing programs to my SD card on my O2 exec. Since I'd only just added the card and was running the basic installation, I did the following:
1) Hard reset
2) Personal Install
3) Re-install ActiveSync on PC
This did the trick. Thankfully I like the Personal install best anyway, but I don't know if that step was necessary.
Tried it. Still get the problem :-(
My mistake - I managed to install the Clearvue PDF program, not the GPRS monitor program. I'm still getting the ROM version error with the GPRS monitor program, but I've not tried the above download yet.
Anyone got any other ideas to fix this problem.
Shame O2 don't have an update to fix this problem on their website.
I've now tried the CAB posted above by astage and I can confirm it worked for me. Just copy the CAB to your device and then open it to start the install.
http://www.tomtom.com/support/index.php?Language=1&FID=3361
Interesting that it says:
"TomTom NAVIGATOR is now compatible with Microsoft Windows™ MOBILE 5.0 devices. See the compatibility list for more information."
And when you go to the list there are no WM5 devices in there :shock:
...but it works :wink:
btw, you don't need to have TT 5 already installed on the system ...just install this verison (5.21) and create a "Voices" directory with your voices files in the root of the ppc ...that's all
mdkia said:
btw, you don't need to have TT 5 already installed on the system ...just install this verison (5.21) and create a "Voices" directory with your voices files in the root of the ppc ...that's all
Click to expand...
Click to collapse
Does that mean you have to register this update with TomTom to prove you're a legitimate user? I guess so.
Still waiting for an official (tested and accepted ) update before I upgrade my legit v3 to a legit v5. (Currently running a cracked version cos I'm not happy that TT5 is working properly on WM5, or even that TT5 is the best solution any more :roll: )
mdkia said:
btw, you don't need to have TT 5 already installed on the system ...just install this verison (5.21) and create a "Voices" directory with your voices files in the root of the ppc ...that's all
Click to expand...
Click to collapse
Does that mean you can do it on the storage card: "My Device\Storage Card\Voices"; or does it have to be on the "PPC: My Device\Voices" ???
SiliconS said:
Does that mean you have to register this update with TomTom to prove you're a legitimate user? I guess so.
Click to expand...
Click to collapse
you need to have the original activation code provided by TT
BillB said:
Does that mean you can do it on the storage card: "My Device\Storage Card\Voices"; or does it have to be on the "PPC: My Device\Voices" ???
Click to expand...
Click to collapse
I have it on \Voices ...dunno if it works on the SD too
So what is different about this version. Or should I say what is fixed in this version? Does it keep the screen in the current screen mode (i.e. VGA or does it reset the screen to it's own bidged semi VGA size).
SiliconS said:
mdkia said:
btw, you don't need to have TT 5 already installed on the system ...just install this verison (5.21) and create a "Voices" directory with your voices files in the root of the ppc ...that's all
Click to expand...
Click to collapse
Does that mean you have to register this update with TomTom to prove you're a legitimate user? I guess so.
Still waiting for an official (tested and accepted ) update before I upgrade my legit v3 to a legit v5. (Currently running a cracked version cos I'm not happy that TT5 is working properly on WM5, or even that TT5 is the best solution any more :roll: )
Click to expand...
Click to collapse
I've installed it twice now and when I go to TomTom Version it still says its version 5.1 anyone else with the same problem, or does someone know something I dont like you have to remove all of tomtom first ????
CarlnAdele said:
I've installed it twice now and when I go to TomTom Version it still says its version 5.1 anyone else with the same problem, or does someone know something I dont like you have to remove all of tomtom first ????
Click to expand...
Click to collapse
version 5.210 (5430) ...but i did a clean install
OK this is strange and i need some help....
i installed the app in my sd card...
i made the "Voices" folder in the root of the ppc...
and i runed the app BUT (this is the strange part)...
i am still in the preferences screen as after i press the screen to choose a preference i can only get to the next step by pressing the button with the red telephone and then maximizing the app again from spb. the moment i press the red button i can see tom tom proceeing to the next screen and then the app minimizes.
any ideas on this?
thanx
So it's not all good news then. Does this mean that TomTom's 5.2 release isn't quite ready for WM5 after all? Can anybody comment on differences in performance between 5.1 and 5.2? Does the screen still redraw slowly?
well it might be my mistake or something but...
so what about the rest of you? has anybody tested it? how did you installed it?
I did a full install on to the Exec, direct from the TT site download. I had hard reset the phone first, yes you do need to add a voices folder in the root of the SD card, but otherwise it all works fine - you can use the data.chk file from 5,1 if you like the real voice warnings, the only thing you can't use is the POIExtend software (yet) Mike
Downloaded the zip file from TT site unzipped it and ran it, it uninstalled Ver 5.1 for me the reinstalled 5.2 somewhere along the way it requested a soft boot.
It all appears to function. However I have not had chance to test it in anger.
I previously had TTNav 5.1 (plus maps, voices, POIs) installed and running succesfully from SD-card.
Installed v.5.21 update, which said it would remove the previous version whilst installing and gave me a choice of location for only one of the .CABs. Afterwards I discovered 4MB of main/device storage had gone missing, so checked and found that the new version had now installed itself into device storage and the old version 5.1 was still in SD-Card. Upon checking the registry I found all the entries still pointed to the old version in SD-card. Tried installing again, same result. Uninstalled and installed again, same result.
Decided "what the hell", moved all the new version files to the SD-card locations, modified the program menu shortcut to start TTN from SD-card, removed their "stupid" Today-plug-in, and fired it up. Now working again from SD-card, and have 4MB of device storage back!
As mentioned before, I feel TomTom have totally lost their way roll with PDA navigation. TTNav5 is just a bodge on their stand-alone TT-Go product code to get it more or less to run on a PDA.
I think it's been observed elsewhere that Tomtom seem to be writing a standard application that will work across all their supported platforms. This is cheaper and easier to support but is frustrating for power users.
I am now using Navigator 5 in addition to Mapopolis, and I find the delay in connecting to my Bluetooth GPS (GlobalSat BT338) very annoying. There is nowhere to specify baud rate and I am sure that Tomtom every time is scanning the range to find the GPS, it takes so long.
This makes TT fairly idiot-proof and user-friendly, but at the expense of the more technically minded. Of course, supporting technical options ties it closer to the particular operating system, which is probably what they are trying to avoid doing...
Hi all,..
when I use the update from the TT website, and installed it is asks vor an registration code, the activation code...
does anyone alse have this problem?
a
Ok, apologies if this is a dumb question from a relative newbie.
I found a thread to download "HTCustom 1.8 cab" (by Shadowmite), and need some help.
http://forum.xda-developers.com/showthread.php?t=316416
1. It's a year since it was posted, so is it still valid and a recommended download? I have read that amongst other things it will allow me to not have sim contacts listed as well as phone contacts, as well as improve the volume of incoming calls, so I am keen to try it out, as long as there is absolutely NO RISK FACTOR (I can make do without it!).
2. HOW DO I INSTALL IT? I save it to my desktop. It's a zip file which when opened presents me with the 3 files "HTcustom.000", "ooocab90.001", and "setup.xml". What do I do now???
Apologies, but I've always used activesync to install cabs so am not sure what to do in this case!
Any help appreciated. Thanks in advance.
Matt.
Mattster_spv said:
Ok, apologies if this is a dumb question from a relative newbie.
I found a thread to download "HTCustom 1.8 cab" (by Shadowmite), and need some help.
http://forum.xda-developers.com/showthread.php?t=316416
1. It's a year since it was posted, so is it still valid and a recommended download? I have read that amongst other things it will allow me to not have sim contacts listed as well as phone contacts, as well as improve the volume of incoming calls, so I am keen to try it out, as long as there is absolutely NO RISK FACTOR (I can make do without it!).
2. HOW DO I INSTALL IT? I save it to my desktop. It's a zip file which when opened presents me with the 3 files "HTcustom.000", "ooocab90.001", and "setup.xml". What do I do now???
Apologies, but I've always used activesync to install cabs so am not sure what to do in this case!
Any help appreciated. Thanks in advance.
Matt.
Click to expand...
Click to collapse
If it is .cab so just copy it to your PDA and install it there.. don't extract the .cab
Hi, thanks for the reply.
Like I say, it's saved on my desktop as a zip file which when opened presents me with the 3 files "HTcustom.000", "ooocab90.001", and "setup.xml".
So... what part of it do I copy and where exactly in my pda do I put it? In My documents? On the Storage card?
Mattster_spv said:
Hi, thanks for the reply.
Like I say, it's saved on my desktop as a zip file which when opened presents me with the 3 files "HTcustom.000", "ooocab90.001", and "setup.xml".
So... what part of it do I copy and where exactly in my pda do I put it? In My documents? On the Storage card?
Click to expand...
Click to collapse
It's not a zip, it's a cab, just that you have cab files associated with your archiver. Just copy the file to the device and tap it.
Hey Tnyynt.
To where, storage card or my documents?
Mattster_spv said:
Hey Tnyynt.
To where, storage card or my documents?
Click to expand...
Click to collapse
Doesn't matter for copying, install it to your device though!
I've installed it, it did warn me that it may not work with Windows Mobile 6.1, and it seems it doesn't. Doesn't work on my device anyway, whatever the reason...
When I attempt to select any tweaks and save it, it just says error and asks me to quit the program! I'll contact Shadowmite and see if there is a WM6.1 version.
All I really want is to NOT have SIM contacts appear as well as phone contacts (so suprised there is not an option.. what's the point in having duplicates???)
Also, apparently there is a fix out there that improves the volume of incoming calls?
Advice anyone?
Mattster_spv said:
I've installed it, it did warn me that it may not work with Windows Mobile 6.1, and it seems it doesn't. Doesn't work on my device anyway, whatever the reason...
When I attempt to select any tweaks and save it, it just says error and asks me to quit the program! I'll contact Shadowmite and see if there is a WM6.1 version.
All I really want is to NOT have SIM contacts appear as well as phone contacts (so suprised there is not an option.. what's the point in having duplicates???)
Also, apparently there is a fix out there that improves the volume of incoming calls?
Advice anyone?
Click to expand...
Click to collapse
It must have something to do with Framework. Do you have it installed?
As for the sound issue, do you have WOW SRS installed? If not, what's your ROM version?
Regarding SIM contacts, here!
Tomtom have released a new version of there software specifically for the TP2.
Version is 916.9189. Have installed but not tested yet. All traffic is working on this version unlike the previous release.
can only be installed on TP2 and maps of course still need to be purchased. They are including this with new purchases of the phone now.
If someone can confirm if ok to post the link ?
Thanks
ok link is below, if not ok please remove the link
Here
edit from Sleuth
The app itself isn't warez since it encourages you to load up a free local map then buy commercial maps if you like it. Keygens for the maps are warez and not permitted.
With this in mind, I took the liberty of modifying the cab in your link. First, I removed all the BT drivers simply to make the cab smaller. While your original cab does have the BT drivers, the install script only loads them if they aren't already there so no overwriting occurs.
More importantly, the modified cab includes a version of 916.9189 that lights up the contact navigate button. I've placed a link to this modified cab on this post
TomTom is a great navigator. If you enjoy playing with the free map, go out and purchase legal maps from TomTom. The more WM platform purchases TomTom gets, the more they will be incented to continue to support and improve this excellent product.
could you post a link to download?
thank you
ok link is below, if not ok please remove the link.
LINK
Will this version screw with the BT stack? Also, if you already have maps, will it request you to register maps again?
A further question: any help with the lag issue that many (inc. me!) are struggling with?
I doubt it - but had to ask!
shawndh said:
Will this version screw with the BT stack? Also, if you already have maps, will it request you to register maps again?
Click to expand...
Click to collapse
I have already upgrade, and did not have any issues. Everything works great on my TP2, no slowdowns for me.
Does Tom Tom say the street names?
Thanx. Appears to work well. I'll test it tomorrow.
How about the TMC function ????
Total Noobie question here!
I currently run version 7.450, I have downloaded the new version, but what do I do with it, if I run it, it works, but I have to run it from file manager, as opposed to the program icon, how do I install it correctly?
Apk1 said:
Total Noobie question here!
I currently run version 7.450, I have downloaded the new version, but what do I do with it, if I run it, it works, but I have to run it from file manager, as opposed to the program icon, how do I install it correctly?
Click to expand...
Click to collapse
Goto file explorer, copy the tomtom file, then goto my device/windows/start menu/programs folder. then hit the menu to "copy shortcut" in this folder. You will now see an icon in the programs folder for this version of tomtom.
If you already have tomtom installed you may want to uninstall it first or just delete the shortcut(s) from the programs folder so you know which one you're using.
Works for me. Would like to know what the changes are.
dazultra2000 said:
Works for me. Would like to know what the changes are.
Click to expand...
Click to collapse
Yes please.
Thanks.
shawndh said:
Goto file explorer, copy the tomtom file, then goto my device/windows/start menu/programs folder. then hit the menu to "copy shortcut" in this folder. You will now see an icon in the programs folder for this version of tomtom.
If you already have tomtom installed you may want to uninstall it first or just delete the shortcut(s) from the programs folder so you know which one you're using.
Click to expand...
Click to collapse
Thanks Now working ok
The main improvement is that now the keyboard works fine on the TP2 with TT7
right i tested this on the way to work this morning, for me the lag is still there so no improvment. the traffic does now work which is one thing but still a definate lag compared to my tytnII which was spot on. This is with the new rom from HTC on it as well the one with copilot preinstalled.
sdcard is a class 4 so dont think it is down to that either, shame as i really thought they would sort the lag out.
anyone else?
I get a not enough memory error when trying to install this. What am I doing wrong? Stock TMo US.
shawndh said:
Will this version screw with the BT stack? Also, if you already have maps, will it request you to register maps again?
Click to expand...
Click to collapse
Would like to know that too!!!
credinho said:
Would like to know that too!!!
Click to expand...
Click to collapse
No problem with Bluetooth. I already had a previous version of TomTom installed. Just unzipped the .zip file into program files\navigator and it worked.
You don't have to reregister maps.
I was asked to join MyMaps or something like that. In which you can manually edit maps to keep 'm up to date. Also you can subscribe and download eachothers updates.
vdKarel said:
No problem with Bluetooth. I already had a previous version of TomTom installed. Just unzipped the .zip file into program files\navigator and it worked.
You don't have to reregister maps.
I was asked to join MyMaps or something like that. In which you can manually edit maps to keep 'm up to date. Also you can subscribe and download eachothers updates.
Click to expand...
Click to collapse
I was trying to install it now, but I first unnistaled the old version that I had I now I can't install this one.... probably I have to re-install the old version right?
Edit: It worked... I think. But now saiys that I've to activate the maps again.... let's see.
Hi.
I am having some trouble with my LEO!
When I try to enable bluetooth trough comm manager, I recive a message that says "can not enable bluetooth".
When I am going on advanced settings menu and touch the bluetooth icon it gets highlighted but nothing happends. All others connections and icon do work perfect.
I have had my device for 3 days, and have never tryed bluetooth on it before. I have stock ROM on it.
Hope that someone can help me with this problem.
Sorry for crappy english! =)
Do you have TomTom installed on your machine? That navigation software can screw up the Bluetooth stack on the HD2 by installing and overwriting WM stock bluetooth files...
Drakknar said:
Do you have TomTom installed on your machine? That navigation software can screw up the Bluetooth stack on the HD2 by installing and overwriting WM stock bluetooth files...
Click to expand...
Click to collapse
Yes, I have tomtom installed. Is my only option hard reset, and never use tomtom again?
When device is starting up I got a warning: BTTrayCE.exe is not a valid pocket PC program.
Any ideas?
It's very simple to fix this:
remove BtCoreIf.dll from Windows folder and softreset.
ghale said:
It's very simple to fix this:
remove BtCoreIf.dll from Windows folder and softreset.
Click to expand...
Click to collapse
Thank you so much! It is working perfect now! =)
You're welcome.
Same problem, trying to apply the same solution, but can't delete the file. I've tried with Total Commander but it says it can't! Any ideas what the 'user error' here is?
Please check if the attribute of the file is ROM.
If is ROM, then you have the original file.
If ROM is not set, then try to soft-reset the device then with the native file manager choose "Show all files" and delete the file.
Then soft-reset again.
It is read only, system and in ROM according to Total Commander. The native file explorer has now lost the delete option completely! Properly stuck now!
It's a normal behaviour of the file Explorer. You can't delete a ROM file.
You have the original file.
Try to delete BTTrayCE.exe, then and then restart.
It will be restored automagically.
Let me know.
That is also a ROM file and won't delete.
Ah!
I don't know, then, what is the problem.
What type of issue you have on your mobile?
Exactly the same as the OP, when the phone starts it has a Bluetooth Error, then won't start Bluetooth.
Ok, but you can write what message you see, exactly, please?
paulrockliffe said:
Exactly the same as the OP, when the phone starts it has a Bluetooth Error, then won't start Bluetooth.
Click to expand...
Click to collapse
Factory reset will fix it, and was for me the only way to get it to work again.
For fun.. Try your FM radio. It does also not work anymore!
Sorry, I can't help you, then.
Yes, unfortunately in some cases it's impossible to delete the files modified by the TomTom install. At first I have done a hard reset, too; then I prepared a modded TomTom CAB file without the BT drivers so that now everything works fine. If you should need it, I can upload it somewhere.
Hmmmmm! I'm not going to run a factory reset until I can put HSPL and a modified ROM, it's a pain not being able to use my bluetooth headset, but not worth the hassle of reinstalling everything. While I'm waiting I'm going to try out loads of other bits of software and workout how to use Sashmi etc to make it much easier to restore everything when I change ROMs.
Drakknar, if you could upload that file somewhere that would be useful, not just for me I'm sure. Maybe email it to the guy who's doing the hints and tips thread to attach it to that perhaps?
I'd be glad to share the link with everyone, but I think that posting a link to TomTom Cabinet in XDA-Dev would be against the rules. If it's allowed, I'll send the link to the author of the tips n tricks post, otherwise I can send a PM with the updated .cab to those who are interested
Drakknar said:
Yes, unfortunately in some cases it's impossible to delete the files modified by the TomTom install. At first I have done a hard reset, too; then I prepared a modded TomTom CAB file without the BT drivers so that now everything works fine. If you should need it, I can upload it somewhere.
Click to expand...
Click to collapse
maybe renaming the file will work?