Could someone please confirm that a2dp is a selectable option? Using either the Motorola 820, Jabra bt620s and/or the Sony Ericsson HBH-DS970. Also could somebody look in the registry setting HKLM/SOFTWARE/Microsoft/Bluetooth/A2DP/Settings/. I do appreciate it and thank you for assistances.
I can confirm that my Motorola HT820 works perfectly, both for calls and music/videos. And the sound quality over a2dp is far superior to that of the Universal, I get none of the audio artifacts when listening to music, it sounds perfect.
I can confirm nokia hs-12w stereo headset working with controls
aznanubis said:
Also could somebody look in the registry setting HKLM/SOFTWARE/Microsoft/Bluetooth/A2DP/Settings/. I do appreciate it and thank you for assistances.
Click to expand...
Click to collapse
Default - value not set
Bitpool - 0x1E (30)
MaxSupportedBitPool - 0x1E (30)
UseJointStereo - 0x1 (1)
Jabra BT8010
Hi all I got the Jabra 8010, All controls and A2Dp works great. However not sure if this is a bug but all Audio is redirected to the headset thus muting the phone. I.e. no ringer no key press sounds etc. all is redirected through device. This can be a little bit annoying as sometimes i miss calls.
Using Motorola HT820 and Jabra BT800, and I don't have that problem.
Are you able to try a different model of headset and see if the problem still occurs?
faisal.husain said:
Hi all I got the Jabra 8010, All controls and A2Dp works great. However not sure if this is a bug but all Audio is redirected to the headset thus muting the phone. I.e. no ringer no key press sounds etc. all is redirected through device. This can be a little bit annoying as sometimes i miss calls.
Click to expand...
Click to collapse
i am using iTech clip D, and it does not have this problem as well.
I don't have that problem with my iTech headphones.
Related
go to hklm\software\oem\voicecommand and set the value of "launchapenable" from 1 to 0
when activating voicedial from your headset (press connect button at the headset 2 sec.) it diverts all audio to the bluetooth.
works also with musik.
pressing the button again it disconnects the bluetooth and the main speakers are active again.
in this case the original voice dial does not work anymore until you change the value back to 1.
for me a good solution because i don't use voice dial and prefer insted skype and headset.
Very good tip...will try that!
Cheers...!
Works on QTEK S100 with Jabra Bt 250 Headsets?
Do you happen to know if the BT specification of the EXEC allows it to transmit stereo audio? Say from a mediaplayer to a BT car kit?
If so, that would send me over the edge and Id have to buy a BT carkit!
...ohh, on 2nd thoughts, it would also depend on the bandwidth too. Anyone know what sort of frequency range BT stereo may be limited to?
for stereo output is another reg.hack needed i think. because pushing the voicedial button at the handset it activates the bluetooth headset profile for listening to the voice but voicedial doesnt start. so you can use it for normal micro and loudspeaker.
maybe anybody knows how to activate in this case the "high quality audio profile" by editing the registry instead of "headset profile"?
Great job, The sound (in music) is good ? i tested this but the sound wasnt good.... I think my headset isnt good for music.
yes it depends on the bluetooth profile. for good quality "high quality audio" (A2DP) profile is needed.
blueangel
would this work on a blueangel running WM5?
gazela00 said:
Works on QTEK S100 with Jabra Bt 250 Headsets?
Click to expand...
Click to collapse
How did u do it....I mean yours is not a WM 5 OS...Pls advice
hdubli said:
gazela00 said:
Works on QTEK S100 with Jabra Bt 250 Headsets?
Click to expand...
Click to collapse
How did u do it....I mean yours is not a WM 5 OS...Pls advice
Click to expand...
Click to collapse
No it does not work in QTEK s100....
Works -but not great
very tinny muffled sound on my moto HT 820, was hoping it would work as well as the bluetooth stack update for the magician.
Sound does come out in both ears on my stereo phones. but I dont desire to listern to the tinny sound.
Still great find and discovery. Just hope someone can progress it to A2DP asap.
sorry, but can anybody tell me how to edit the registry in WM5? I never did it before. What tool do you guys use? Is it something free?
Thanks.
I used PHMREGedit
Here's the link:
http://www.freewareppc.com/utilities/phmregistryeditor.shtml
andyes....it's free.
Tried it with my BT200
I know the registry works....but cannot get it to play on the headset.
It works...becos upon pressing the phone button on the head set for 2 sec, the audio comes from the handset. On redoing it again, the audio goes off from the handset.
Mine is working fine. I really like the way its now.
Thanks a lot.
Ooops....
my Bt200 wasn't working. That's why there was no audio coming from it.
Need to figure out why there is no audio coming from the headset.
Sigh another problem!
So basically, the registry works.
Im using Total Voice COmmander and it works with WMP.. No need to install another software to play music thru BT.
I just press my Jabra headset twice and it goes "Say Command".. then I say "Play a music"..
Sometimes it's stubborn and Calls someone or Says "Today you have no Appointment" but I guess with a lot of practice, my Dopod understood what Im saying and played me a song.. Now, Im having trouble with my Dopod catching the title of the song i want it to play. I've placed voice tags on the songs and 50% of the time, my dopod got it right.. got to work on the other 50% though..
Hi.
I have one HTC TYTN and one bluetooth headset but I only have sound in the phone function.
I don't have any sound with media player, ring tones and other sound programs, but with phone calls the BT (Bluetooth) works fine.
I can hear in HTC, but not in BT
I try with
NOKIA BH600
MOTOROLA H350
JABRA BT135
Is this a problem from my HTC or they don't work at all??
Thanks
Fmpm
BT only working with Phone
I have a similar problem. Tried with a Motorola HS850. BT Only works with the phone, not the PDA, and certainly not with Skype. Using the "Hands Free" profile.
Can anyone confirm a BT headset that works with the PDA side (i.e. Skype)?
I have also heard that BT headphones with AD2P profiles will work, but they won't fit in your pocket.
mixersoft said:
I have also heard that BT headphones with AD2P profiles will work, but they won't fit in your pocket.
Click to expand...
Click to collapse
Depends on what you mean by "pocketable". For example, my Plantronics 590A is collapsable and some other A2DP headphones don't have a headband at all.
Please DO check out my A2DP-related articles either on my blog or here in the General forum - I elaborate on these questions a LOT in there.
mixersoft said:
I have a similar problem. Tried with a Motorola HS850. BT Only works with the phone, not the PDA, and certainly not with Skype. Using the "Hands Free" profile.
Click to expand...
Click to collapse
Use either BlueMusic (see my related article on this title) or BTAudio (see http://forum.xda-developers.com/showthread.php?t=280353 )
fmpm said:
Hi.
I have one HTC TYTN and one bluetooth headset but I only have sound in the phone function.
I don't have any sound with media player, ring tones and other sound programs, but with phone calls the BT (Bluetooth) works fine.
I can hear in HTC, but not in BT
I try with
NOKIA BH600
MOTOROLA H350
JABRA BT135
Is this a problem from my HTC or they don't work at all??
Thanks
Fmpm
Click to expand...
Click to collapse
See above: BTAudio / BlueMusic will be your friend.
After reading very long threads about this issue, many changes in the registry and some full pda restores, I haven´t found the way to redirect all the sounds to the handsfree in my TRINITY.
Has anyone managed to make BTAudio or any other program work with a Trinity?
I think that as long as the handsfree headset you use supports the A2DP profile then all audio is redirected to it without the need for any registry hack. At least that's my experience with my SonyEricsson stereo BT headset.
2 Types of Redirect
One is with A2DP where the bt device is compliance to it. I do not have one but I believe it will work fine.
Another way which I am using is via the Handsfree Voice Command channel. When a voice command software(Such as Cyberon Voice Speed Dial) is installed and when the recognition is triggered(usually by a button on headset), all audio is redirected to the the headset.
So the trick is to keep this redirection longer.
This is can achieved by changing two registry settings.
- Change the duration to something longer, like FFFF.
- Invalidate the voice command software execution.
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand]
"VoiceCmdDuration"=dword:FFFF
"Path"="\WINDOWS\invalid_sddialer.exe"
With that, I have lost Voice command via my headset but I hardly do VC at all, and if needed, I had associated one of the button on my dopod to launch VC but I need to speak into the phone instead.
Not sure if this is the best way but it's the only way I know of untill I figure out other.
FYI, I'm currently using Dopod D810 with lvsw ROM (http://forum.xda-developers.com/showthread.php?t=299771) and a Motorolla H700.
anonimo said:
I think that as long as the handsfree headset you use supports the A2DP profile then all audio is redirected to it without the need for any registry hack. At least that's my experience with my SonyEricsson stereo BT headset.
Click to expand...
Click to collapse
Hello,
I agree with this.
I had not been able to get the Trinity to redirect audio to a sony HBH-IV835 heandfree device.
Since I've change for a Sony DR-BT20NX headset with AD2P profile it's working like a charm. No more registry hack or software needed.
Then registry hack only concern improvement of audio quality (bitpool and so on).
Sadly i'm not able to use real stereo (replace the use of joint stereo) because it's generationg a slight annoying hiss sound.
Is this still the status, also with WM6?
I can't believe it's not possible to redirect some kind of way like I've been reading in the Tornado treads.
Yeah, I'm also can't redirect all sound to my headset (Plantronics Pulsar P590) by one click or by launch some program. Every time I need launch BT Settings, open Devices tab, tap'n hold on "590Plantronics", and select "Set as hands-free" or "Set as Wireless audio".
Can't find other ways to do it - no registry hacks, no other...
Does this help maybe?
http://pocketland.de/product.php?prod_id=36311
I did not test it yet...
No, it doesn;t work too... All discussed programs (BTARouter, BTAudioNav, BTAudioToggle) are just redirect phone calls to the my headset. No audio output at all (headset icon doesn't appear).
Just found this:
http://bluetooth.pdatopsoft.com/SmartPhones/Bluetooth-Audio-Router
Anyone try it on Trinity? Its a new program to me.
clinton said:
Just found this:
http://bluetooth.pdatopsoft.com/SmartPhones/Bluetooth-Audio-Router
Anyone try it on Trinity? Its a new program to me.
Click to expand...
Click to collapse
I just tried it. Didn't work. I could hear it activating the speaker on the headset as I launched the app (soft hiss) but it didn't re-direct any audio. Voice calls only through the headset (which is the same as without the app installed). I guess it really only works for smartphones.
The registry hack worked for me but I need voice command so it's not really a permanent fix for me.
I'd be quite happy to buy a new headset too but I don't want something bulky or with wires everywhere like all the stereo ones on the market. The single ear clip on ones are just so quick and easy to use...
peon said:
I just tried it. Didn't work. I could hear it activating the speaker on the headset as I launched the app (soft hiss) but it didn't re-direct any audio. Voice calls only through the headset (which is the same as without the app installed). I guess it really only works for smartphones.
The registry hack worked for me but I need voice command so it's not really a permanent fix for me.
I'd be quite happy to buy a new headset too but I don't want something bulky or with wires everywhere like all the stereo ones on the market. The single ear clip on ones are just so quick and easy to use...
Click to expand...
Click to collapse
I saw a lot of different registry hack around here..
The one thath works on p3600 is?
I've tried a lot of but no one works.
I dont't need voice dial so it can be good.
I use my p3600 with a BT Helmet.. so I'd like to listen to tom tom inside..
thanks a lot.
Hi
I have the p3600 and a sony mex-bt 2500 and i can redirect all audio to the carcit but i have to connect with the audio (A2DP)conection and not the headset conection so you'r divice has to have the A2DP profile to work.
jaaphooi said:
Hi
I have the p3600 and a sony mex-bt 2500 and i can redirect all audio to the carcit but i have to connect with the audio (A2DP)conection and not the headset conection so you'r divice has to have the A2DP profile to work.
Click to expand...
Click to collapse
But my bike helmet is not A2DP compliant so I canìt use it.. :-(
Still no solution?
Hi you all,
is there still no solution for the Trinity?
I am actually experiencing the skipping problem, but I would be half-glad if I could redirect audio in mono to the headset.
Please advise!
IsiT_de...
Get headset that supports A2DP profile and it works fine. I have Plantronics Voyager 855 stereo, and it works flawlessly in mono or stereo mode with modifying any registry hacks. Music sounds awesome too with this headset, just like my bose earbud phones.
I don't know what I did do wrong! now all the sounds in U1000 disappeared. every sound moves into the Jabra BT8010. I have to turn off my jabra so that the sound of U1000 reappears.
Any advice! Thanks
jlingo said:
I don't know what I did do wrong! now all the sounds in U1000 disappeared. every sound moves into the Jabra BT8010. I have to turn off my jabra so that the sound of U1000 reappears.
Any advice! Thanks
Click to expand...
Click to collapse
Problem is temporarily solved by deleting all the pairing and redo the pairing of the headset but only choose as handsfree instead of wireless stereo.
jlingo said:
Problem is temporarily solved by deleting all the pairing and redo the pairing of the headset but only choose as handsfree instead of wireless stereo.
Click to expand...
Click to collapse
Ok whenever I turned off my Jabra and then turn it on again, the sound from U1000 all transferred to Jabra again. I have to redo the pairing again. The same with Charging! It's very annoying. Not sure if this happens to everyone else with A2DP bluetooth headset.
I was able to replicate this problem with my Universal WM6 as well. So I assume that it's a problem with all A2DP headsets?
Doesn't happen with me...Phone Ringing is from spkrs..all other sounds to 8010.
jlingo said:
Ok whenever I turned off my Jabra and then turn it on again, the sound from U1000 all transferred to Jabra again. I have to redo the pairing again. The same with Charging! It's very annoying. Not sure if this happens to everyone else with A2DP bluetooth headset.
I was able to replicate this problem with my Universal WM6 as well. So I assume that it's a problem with all A2DP headsets?
Click to expand...
Click to collapse
hdubli said:
Doesn't happen with me...Phone Ringing is from spkrs..all other sounds to 8010.
Click to expand...
Click to collapse
how about the sms sound? does it come out of the U1000 or Bluetooth headset?
SMS sound is to Bluetooth..
I think this is standard behaviour: once you set your BT headset to "Wireless Stereo" mode, all sounds will go to your headset, but phone rings will still happen on both the speakers and the headset.
Same goes for my Dopod U1000 and iTech R35.
Is there an easy way to end Stereo A2DP mode but leave phone headset mode on?
After listening to music on the way to work I want to leave the headset on for calls only, not linked for music (and draining battery more) all day. At the moment I have to turn my headset off and on to do this.
BTW, i have a Jabra BT-150. It sucks with the Ameo. Its the worst POS ive had. It worked fine on other phones, but just doesnt play nice with my Ameo.
On the other hand, my cheap iWing stereo headset from maplin works great! It had problems with wm6 on my old Universal, but works so well on the Ameo.
UK people should check out the £29.99 maplin deal on iWing headsets.
Pyrofer said:
UK people should check out the £29.99 maplin deal on iWing headsets.
Click to expand...
Click to collapse
I'm interested, however can't seem to find them on the Maplin website. Can you tell more?
Would an URL do?
http://www.maplin.co.uk/Module.aspx?ModuleNo=98974&criteria=sale&doy=25m4
I have them and apart from poor low end response in music they work fine.
I just discovered that its not even stereo by default!!!!! You want real stereo? Get out your reg editor...
HKLM/Software/Microsoft/Bluetooth/A2DP/Settings/BitPool=30 - change to 48
HKLM/Software/Microsoft/Bluetooth/A2DP/Settings/MaxSupportedBitPool=30 - change to 58
HKLM/Software/Microsoft/Bluetooth/A2DP/Settings/UseJointStereo=1 - change to 0
Find a song with lots of stereo seperation that you know, listen... Do the reg hack (Soft reboot), listen again.
Man, That sucks! What a stupid default, and why no simple tick box in bluetooth settings to change it?
A simple method just check the A2DP box in BT manager proporties of your handfree and uncheck it.
Pyrofer said:
I just discovered that its not even stereo by default!!!!! You want real stereo? Get out your reg editor...
HKLM/Software/Microsoft/Bluetooth/A2DP/Settings/BitPool=30 - change to 48
HKLM/Software/Microsoft/Bluetooth/A2DP/Settings/MaxSupportedBitPool=30 - change to 58
HKLM/Software/Microsoft/Bluetooth/A2DP/Settings/UseJointStereo=1 - change to 0
Find a song with lots of stereo seperation that you know, listen... Do the reg hack (Soft reboot), listen again.
Man, That sucks! What a stupid default, and why no simple tick box in bluetooth settings to change it?
Click to expand...
Click to collapse
Ahhhh .... no wonder I find that the music streaming from the U1000 sounds a bit hollow and not as stereo as my previous Qtek 9000. Will try this out later. Thanks!
Pyrofer said:
Would an URL do?
http://www.maplin.co.uk/Module.aspx?ModuleNo=98974&criteria=sale&doy=25m4
I have them and apart from poor low end response in music they work fine.
I just discovered that its not even stereo by default!!!!! You want real stereo? Get out your reg editor...
HKLM/Software/Microsoft/Bluetooth/A2DP/Settings/BitPool=30 - change to 48
HKLM/Software/Microsoft/Bluetooth/A2DP/Settings/MaxSupportedBitPool=30 - change to 58
HKLM/Software/Microsoft/Bluetooth/A2DP/Settings/UseJointStereo=1 - change to 0
Find a song with lots of stereo seperation that you know, listen... Do the reg hack (Soft reboot), listen again.
Man, That sucks! What a stupid default, and why no simple tick box in bluetooth settings to change it?
Click to expand...
Click to collapse
HOLLY MOLLY!! It resulted in amazing separation and much better sound quality!!! I can't believe it!
Well, just got my TyTN II. For me it is worth the upgrade from the TyTN.
I have only one issue. My Jabra 320s headset is about 30% lower in recieving volume than it is on my TyTN I. On the original TyTN, the volume was just about right, any lower and it wouldn't be usable, but now that I am running it on the TyTN II it is un-usable at such a low volume.
My question is this?
Is this issue fixable through software/registry etc...
And does anyone have any idea how I can fix this?
JB
That's the big question, low BT headset volume when calling is a consistant issue with most headsets on Kaiser vs Hermes. Time to email HTC support, it's a bug.
lol no problems here. Using Plantronics Voyager 510SL.
Even if it's a bug with the Kaiser, (Probably software) we won't see any fix from HTC anytime soon. That's why I am asking the pros over here at XDA if there is a software/config workaround/fix that can be implemented.
JB
nuclear said:
lol no problems here. Using Plantronics Voyager 510SL.
Click to expand...
Click to collapse
ditto... while i'm not using the 510SL, i am using the 510 and it's quite loud with my Kaiser..
I found my problem and fixed it...
Ok, I'm an idiot... I fixed my bt headset issue with low recieving volume. Through my haste to try and fix the volume issue, I missed one key setting... I forgot to click on the small speaker icon on the top right of the screen and push the volume sliders to max.... Apparently, I only tried to use the jog wheel alone to raise volume and that works, but seems to work seperately from the volume icon levels.
So for me... I have the same volume levels I had as before with the TyTN I.
JB
I have another problem with this headset, I don't get the "stereo" service. The only thing my kaiser recognises is the "handsfree" service.
Does somebody now how I can make it work?
Buzz313th said:
Ok, I'm an idiot... I fixed my bt headset issue with low recieving volume. Through my haste to try and fix the volume issue, I missed one key setting... I forgot to click on the small speaker icon on the top right of the screen and push the volume sliders to max.... Apparently, I only tried to use the jog wheel alone to raise volume and that works, but seems to work seperately from the volume icon levels.
So for me... I have the same volume levels I had as before with the TyTN I.
JB
Click to expand...
Click to collapse
Sorry, this raises the volume in the BT headset for all "system" sounds like voice dial confirmation talkback to the headset, but the in-call volume remains lower than Hermes once you are connected, the slider has no effect. To be clear, if you adjust the slider while NO call is in progress, the volume in the headset will be affected, but after connection the sound volume remains low, no matter how you left the slider from before.
ronaldlokers said:
I have another problem with this headset, I don't get the "stereo" service. The only thing my kaiser recognises is the "handsfree" service.
Does somebody now how I can make it work?
Click to expand...
Click to collapse
Yes.. I had the same problem...
This may sound rediculous on how I fixed it, but it worked.
I paired my laptop and the Headset and then tried to listen to stereo music, and also paired the phone with the laptop and then it would pair correctly with the Jabra bt320s.
It seems to me that the kaiser has a few BT bugs that need to be worked out, and that different pairings will change either reg settings or configs that arent available to the UI...
JB
RemE said:
Sorry, this raises the volume in the BT headset for all "system" sounds like voice dial confirmation talkback to the headset, but the in-call volume remains lower than Hermes once you are connected, the slider has no effect. To be clear, if you adjust the slider while NO call is in progress, the volume in the headset will be affected, but after connection the sound volume remains low, no matter how you left the slider from before.
Click to expand...
Click to collapse
]
You are correct and I am still having low BT call volume, but at the time I was having low BT stereo volume as well. The sliders fixed the stereo problem, but didn't fix the BT call volume.
I haven't tried the fix yet, but I believe someone claims to have fixed the BT call volume with a cooked rom or a modified rom...
I'm not worried that we will have this fixed sometime soon.
JB
ronaldlokers said:
I have another problem with this headset, I don't get the "stereo" service. The only thing my kaiser recognises is the "handsfree" service.
Does somebody now how I can make it work?
Click to expand...
Click to collapse
I am using my Motorola HT820 BT headset without any issues since day one. I simply paired them, and made sure Stereo Headset was selected in the bluetooth options, and they just work. Volume and Track changes from the headset also work great. One thing I never liked about the HT820 was it's range, just about 20 ft. I used to have it paired with my laptop, but no longer since I have 4G of music on my phone....
how long does the kaiser battery last listening mp3 throught bluetooth headset?, anybody tried it?
will it drain battery MUCH faster than using included headset?
jspohn said:
I am using my Motorola HT820 BT headset without any issues since day one. I simply paired them, and made sure Stereo Headset was selected in the bluetooth options, and they just work. Volume and Track changes from the headset also work great. One thing I never liked about the HT820 was it's range, just about 20 ft. I used to have it paired with my laptop, but no longer since I have 4G of music on my phone....
Click to expand...
Click to collapse
I bought a plantronics pulsar 260 and that one works too. In the shop they told me that jabra has much problems with their bluetooth headsets!
pepeto2001 said:
how long does the kaiser battery last listening mp3 throught bluetooth headset?, anybody tried it?
will it drain battery MUCH faster than using included headset?
Click to expand...
Click to collapse
I don't really have any idea, since I charge it nightly. I normally leave the BT on all the time anyway.
Strange problem with handsfree mode
Hi guys,
I have just purchased the Jabra 320s and was happy with the stereo quality and apart from the low volume issue on handsfree calls were handled quite well through the device.
Once, When the phone rang, it was answered by my wife using the phone answer key instead of the Jabra's answer button and since then I cannot answer calls through the Jabra. I have tried the options on the Kaiser whilst on a call to have the call transfered to handsfree but that also does not work, I have tried resetting and re-paring both devices and it still does not work for calls on handsfree (once paired, I have the handsfree option and stereo selected). The stereo is however working fine without any problems when playing mp3's.
Any ideas?
HasC said:
Hi guys,
I have just purchased the Jabra 320s and was happy with the stereo quality and apart from the low volume issue on handsfree calls were handled quite well through the device.
Once, When the phone rang, it was answered by my wife using the phone answer key instead of the Jabra's answer button and since then I cannot answer calls through the Jabra. I have tried the options on the Kaiser whilst on a call to have the call transfered to handsfree but that also does not work, I have tried resetting and re-paring both devices and it still does not work for calls on handsfree (once paired, I have the handsfree option and stereo selected). The stereo is however working fine without any problems when playing mp3's.
Any ideas?
Click to expand...
Click to collapse
Did you solve this problem, I just bought the 320s and am experiencing the same issue?