How to improve wifi range ? - JASJAR, XDA Exec, MDA Pro General

There are any tweaks to improve the range of wifi in universal ?
I have already set to maximum in wifi settings the option "optimize for perfomance"
Do you know some registry tweaks or chip hack tecnhics to improve wifi range ?
My friend nokia n80 and my laptopt as far more range than universal.
Just for comparassion the nokia was floating arround excelent and good signal , and my universal was no signal / poor signal and can not connect to internet...

It's not just you..
I think the WiFi range on my XDA IIs needs improving, but I don't know if its a hardware or firmware/software issue..
I've just "upgraded" from a Dell Axim X3 with which I used a Sandisk 256Mb+ WiFi SDIO card and my WiFi range has dropped dramatically.
So why the move?
a) WiFi SD meant swapping SD cards around all the time
b) no bluetooth on the Axim X3 that I had
c) tired of carrying a phone and PDA
I've seen mod's and upgrades on this site, but often it's unclear which devices they're suitable for... Of course, I try the WiKi for BA first..
Help please?

Well, From my experiences, the Universal's wifi range is almost as good as other wifi devices I have... as long as your wireless router is put in the right place.....
I used to have great problems with my universal's wifi connection, it's just not xxxxing stable, I mean it was connected a min ago, and then it disconnect whenever I use it, and I have to be in that very same room with the wifi router to get a stable wifi connection
Therefore, I bring it to the customer service for over 5 times, the repair guy just keep telling me everything is fine, everything is good, your wifi on your universal is PERFECT! And the dan thing is, it work perfectly for over 30 min in their office.
so I kept changing my wifi router, and another..... but then after some time, I found out all I need to do is place my wifi router indoor, Do not place it near/next to any window, but maybe put it in the middle of the apartment/house/office ....
I found out the Universal is easy to disturb by ANY interference, and place your wifi router near/next to your window will somehow do that. Once I place the wifi router "indoor" everything work just fine
try that, I am pretty sure it will work
J

Please let me know if it help ?

Re: Repositioning WiFi Router
Sounds like a good idea, thanks. I'd have to do some fairly major re-wiring to move my wireless unit though as it is the ADSL modem also and in an office which is not in the main house. Maybe I will have to buy a 2nd wireless unit for inside the house; I have a wired connection between the office and the house.
Strange, though. My Axim would always connect from certain rooms in the house, now by BA doesn't. Perhaps the antennae in BA's need improvement

Related

WiFi?

Hi, i recently bought and upgraded a 02 XDA Mini S to WM6 and the wifi seems bad like i have to go right next to the wireless point to get a good signal and even then its not at full bar can any1 help me with this or is it just the wifi is rubbish on the wizard?
thanks,
Kurt
Did you go to start-->settings-->connections tab-->wireless LAN-->power mode tab and set it on best performance? That should give you some more room to work with.
yep still is really bad though about 10 meters and 2 walls away from the router an i couldnt get a signal.
At "10 meters and 2 walls away from the router" I also get no connection -where my Wifi enabled laptop works fine at the same time. Seems like the Wifi on the HTC device is rather weak and operates from a small distance only. Anyways I've learned to live with it.
oh rite well annoying though considering my dell axim x51 can get a very good signal like 30 meters from the access point. is there anyway i can up the power on my wizard? ive got wireless G enabled aswell.
Ya, I have a 7db antennae on my router and I still seem to need to be inside of 20 or so feet, and no walls for my wizard to find the network. I think it's just a weak card.
I also noticed that.
Yes I also noticed that. I have a wifi hotspot subscription and with my old WM5 ROM i can connect and surf without any problem, however when useing any WM6 ROM i just connect poorly and the connection breaks everytime.
Even in my wireless home router i had turn on the name broadcast (enabling WEP of course) in order to connect properly at the first try.
Ive noted this with every WM6 Rom out there and since my device is a G4 i cant upgrade the radio rom. so... well i suffer from this issue also.

Wifi sucks :(

Hi all,
I just got my device, and still thinking whether to send it back in 7 days. My main complain is the wifi. I have never seen more than 2 bars (out of 4) signal strength, even when sitting 2 meters from the router. Moreover it always drops the connection. I realized it when I tried to use IE for browsing, since that doesn't tolerate it and I keep getting the connection lost messages. Seems that Opera can live with it, but I see when the connection dropped during the page load. Youtube watcher also cannot manage to download videos when the signal is dropped.
The Tx/Rx rate also changes chaotically from 1Mb/1Mb to 54Mb/36Mb.
Before you ask: the Power Mode of wifi is set to "Best Performance", since this is the only way it is usable.
Anybody else with similar experiences?
Any solution?
I really appreciate any help, I would like to keep it!
I have no problems what-so-ever with the wifi on my D2...
It runs very well, in all applications that can use it.
- and I have full signal when I am within 5 meters of the router.
I haven't changed any settings on the device, and the router is running on WPA2-PSK at a channel not used by any of my neighbours.
Maybe you have many wireless networks in your area?
Hi,
I have more or less your problems (I opened a thead about it the day I unpacked my D2 but wasn't really condiderated). Here's my condition: I have 3 HTC devices...Artemis-->regular functioning (balanced power), TytnII-->Power Performance MUST be set to high performance, Topaz..well I could connect with balanced power but since I upgraded radio I have to keep it set to best performance, otherwise I would get "fake" connections (connection established but no data taffic). I don't really bother to have to set it like that because the connection is dam fast, which compensates the higher power consumpion.But beside this, I must say that my router is not very friendly with my D2,e.g. when I don't get a connection,I restart it and it works (this must have to do with DCHP service). I have much less trouble connecting alsewhere. So ,what to say? Try to change radio...Do you have other wireless devices working regularly in the same area?Do you have an original rom?You could also try to change wifi channel..would be happy to help
Hi,
Thank you for the answer. I have original ROM, just checked the radio, it is: 3.43.25.19. I didn't experience "fake connections" when it is connected, it is so .
I cannot change the wifi channel, the same router is used by others. However it cannot be the cause of my issues since my notebook's network works fine on the same router.
Changing the radio... seems a good idea. It is my very first smart device, I even thought that this version number was for the hardware, not the software . I will find out how to do it, maybe give it a try. Hope it is an officially supported action .
Hi Lamsebamsen,
The TD2 sees 4 wifi networks, my notebook sees 8. Is it many or not? I think the 4 which the TD doesn't see is many .
foldip said:
Hope it is an officially supported action .
Click to expand...
Click to collapse
I'm afraid not, as you would have to HardSPL your device first. There would still a way to get back to your original configuration but I don't know if you are prone to do so, that depends on how much responsability you can take on your device (is it from work or..). Another thing to try is to manually configurate your connection (e.g. assign D2 always the same IP, but watchout for network collisions!router should be set aswell)

Question for those who use WiFi on their X1

How far from the WiFi HotSpot can your X1 get before the connection is useless? I'm in a house and it barely works in the next room (newer house, walls made of drywall). My brother has an iPod Touch that works all over the house perfectly (same router). I'm wondering if there is something wrong with the WiFi radio on my X1?
i get v good coverage from the x1 as good as the iphone. try changing your radio firmware
WhyBe,
Is it set to best performance or best battery?
Go under settings to check.
Cheers.
Doesn't it depend on the HotSpot itself ?- I mean on the router, its signal strength and etc...I connect to my router trough 2 brick + concrete walls and have no problems at all...Always connected in every room
cooin said:
Doesn't it depend on the HotSpot itself ?- I mean on the router, its signal strength and etc...I connect to my router trough 2 brick + concrete walls and have no problems at all...Always connected in every room
Click to expand...
Click to collapse
same , even good outside/inside the neighbours house ,
be sure to have the 1.15 or 1.16 radio (or smthing like that , the new ones)
+what poisonwolf said
and dont buy a metal case for ur phone
also helps if i slide open the phone for me ... and its good to face the router too (not with ur back towards it)
cooin said:
Doesn't it depend on the HotSpot itself ?- I mean on the router, its signal strength and etc...I connect to my router trough 2 brick + concrete walls and have no problems at all...Always connected in every room
Click to expand...
Click to collapse
I can always connect to my router from the door on the street (I live on the first floor) and everywhere in the house including the bedroo with router being on the corridor outside.
And I did not tweak anything in my EnergyROM 3.0
Thanks all. I have never specifically changed my radio firmware. Is this something that is updated when I change ROMs? I've went from R1a to R2a to R3a. Does the radio get changed with these?
I have the X1 set to best performance.
It depends on what kind of router you have. The cheap ones are crappy. I have a medium spec one and I get good connectivity through 3 walls.
I have a LinkSys G router. It is pretty common. Everything I use works fine with it (3 laptops and iPod Touch). Only the X1 can see it but not connect.
WhyBe said:
I have a LinkSys G router. It is pretty common. Everything I use works fine with it (3 laptops and iPod Touch). Only the X1 can see it but not connect.
Click to expand...
Click to collapse
Did you see the settings in the phone that allow you to use better Wi-Fi reception, but get poor battery life? I had problems with Wi-Fi until I set it to "better performance" rather than "better battery life".
Yes, it is set to best performance. My X1 recognizes the router but doesn't connect. I'm wondering if there is some other problem?
EDIT: OK, I just discovered that if I turn off the phone radio, the WiFi works properly. Is it supposed to be this way?
with linksys and all other routers really one have to upgrade the firmware once in awhile
to get best support with newer devices
WhyBe said:
Yes, it is set to best performance. My X1 recognizes the router but doesn't connect. I'm wondering if there is some other problem?
EDIT: OK, I just discovered that if I turn off the phone radio, the WiFi works properly. Is it supposed to be this way?
Click to expand...
Click to collapse
Nope. There is a problem. I have no idea what it could be though . Maybe an update is a good thought.
I only use stock ROMs and haven't really tweaked my system beyond factory state. So I don't see why I need to update anything. I'm thinking there is some sort of conflict between my internet settings for the phone and the internet settings for the WiFi connection?
WhyBe said:
I only use stock ROMs and haven't really tweaked my system beyond factory state. So I don't see why I need to update anything. I'm thinking there is some sort of conflict between my internet settings for the phone and the internet settings for the WiFi connection?
Click to expand...
Click to collapse
Facepalm.jpg
Update the router not the phone .
WhyBe said:
Yes, it is set to best performance. My X1 recognizes the router but doesn't connect. I'm wondering if there is some other problem?
EDIT: OK, I just discovered that if I turn off the phone radio, the WiFi works properly. Is it supposed to be this way?
Click to expand...
Click to collapse
Mine did that when I 1st tried to set it up, it would find the network (hidden) ok, but would not connect. No matter what I tried, even though 2 pc's (wired), laptop (wireless), xbox (wired) & iPod touch (wireless) were working fine.
I gave up on the X1 and turned my attention to the router, tried a static IP for the X1 etc (it's back on DCHP now), after rebooting the router, the X1 connected and worked fine and it has ever since. I have no idea why - but initially it would not connect - something funny with the router.
I have a netgear router and every now and then kicks me off. i have to disable my wifi on the x1 and reconnect or even power off the router and back on for it to work.
Turn off your router for 1 minute and power back on then try to reconnect your x1.
I have a Linksys WRT160N router and it actually doesn't even detect it when it transmits mixed speed, only of I put it on B and G it detects it.
Otherwise the signal is average, a bit worse then my laptop.
WhyBe said:
How far from the WiFi HotSpot can your X1 get before the connection is useless? I'm in a house and it barely works in the next room (newer house, walls made of drywall). My brother has an iPod Touch that works all over the house perfectly (same router). I'm wondering if there is something wrong with the WiFi radio on my X1?
Click to expand...
Click to collapse
I only use Wi-Fi at my university. Well basically my Wi-Fi works everywhere around campus, at the dorms, and at the movie theater right next to school.
It's freaking great, but I prefer 3G. I just can't afford it.

Wifi sucks on touch HD

When I first bought the touch HD I was thinking how good it would be to have this phone while having wifi with the lack of 3g for tmobile in the us, but it turns out that the wifi acutally suck! I have a iPod touch 2g And the wifi works great with blazing speed. I can't seem to detect my wifi at home mean while I'm connected on my wifi with my iPod. I been very disappoint with this phone for simple fact that this phone recieves wifi poorly. Anyone can help me out with this problem would be much appreciated because despite the wifi problem I love the phone cause the 3.8 screen is so damn sexual lol.
I've no such issues!
Try to set wifi power options to performance. Also, Enabling G Mode (with SKTools is one of the ways) helps improve speed.
Thanks for the info but it might be the lack of range of my router cause I have been on my wifi with the phone before but I get disconnected frequently and most the time it doesn't even show up or detect it but I don't have that problem with the iPod. With iPod I seem to get wifi everywhere. I'm starting to believe the iPod is better might sell it and get a iPhone or maybe a hero but don't know if I'm willing to spend 600+ on another phone
Next time put [rant] on the title
My wifi connects well to open, WEP, and WPA connections. I tried numerous access points (at least 30), even 802.11n APs in mixed g mode. It even connects to Apple Airport (802.11g). The connection is stable both on power saving and best performance, but I think I get much better speeds on average with best performance.
Its wifi range is much better than my little HP 613 smartphone, but again worse than my notebook. I get 54Mbit connection with signal quality of about 50% at 10 meters through a wall and then it automatically finds another channel on another AP. It roams (handover) APs better than some Lenovo r61 laptops around!
But I am not satisfied with its speed (even on best performance) - it finishes copying a 700MB file on a 54 Mbit connection in 30-40 minutes using total commander and saving on storage card. That means average speed is around 300-400KB/s - laptop does the same (same AP, same file, same network settings) at 1.6-1.8 MB/s in around 7 minutes.
I also noticed that saving on storage card is slighty faster than into the main memory...
I can't seem to detect my wifi at home mean while I'm connected on my wifi with my iPod.
Click to expand...
Click to collapse
Hmm, are you sure that you don't compare two different situations ? Did you also try connecting to Wifi with your iPod while already being connected with your Blackstone ?
My personal experience shows me that the Touch HD seems to have a better radio than the iPhone 3G. Have you upgraded to the latest Blackstone stock ROM and radio available on the HTC website or XDA Devs ? Whether or not the radio also affects Wifi unfortunately I don't know.
Moreover, use WifiMonster to monitor the strength of the signal, it'll help you discover the best spots for using Wifi. I even receive Wifi signals from the neighbors' houses in my own house (not speaking about appartments), of course that always depends on the room !
BTW I'm pretty sure that a Hero won't solve your problem, it's the same old hardware specs as on the Blackstone.
The Wifi on my device works perfectly and i have had no issues at all with signal or quality. I have had more problems with my ipod than the HTC, are you sure its not the WIFI AP you are trying to connect to? Also are you using stock rom or custom?
I'm using the Energy ROM. I'm assume its my wifi signal its very weak and my touch hd cant seem to detect it. With my ipod i shows up and i can connect to it...will updating the radio make a difference?
I came across a startling discovery the other day regarding the Touch HD wifi. I was also having issues at home with weak wifi signal. I didn’t seem to have this problem with public access hot spots.
I have a Logitech wireless mouse connected to my computer and very rarely turn that computer off. I found that when my computer was off I would get a rock solid connection to my home wifi, but when the computer was on it would drop in and out. I narrowed it down to the wireless mouse was interfering with the Touch HD wifi connection.
I tried all different channels on my router, but as long as the Logitech mouse was plugged it I would get wifi dropouts. But as soon as I unplugged the mouse and the radio dongle, I wouldn’t have any problems with the Touch HD wifi.
I can’t comment if this is your issue, but something might be interfering in the 2.4Ghz with wifi.
Guys,
Sometimes even cordless phones, microwaves, etc will interfere with the connection.
Cheers.
As Poison Wolf correctly pointed out, other household items can interfere with the wireless frequency. Try changing the channel that's being used to transmit from your box (This will involve changing some settings on your wireless router so do some research before you fiddle around with it) I have had to do this before and can confirm it can make a massive difference.
ikovac said:
But I am not satisfied with its speed (even on best performance) - it finishes copying a 700MB file on a 54 Mbit connection in 30-40 minutes using total commander and saving on storage card. That means average speed is around 300-400KB/s - laptop does the same (same AP, same file, same network settings) at 1.6-1.8 MB/s in around 7 minutes.
I also noticed that saving on storage card is slighty faster than into the main memory...
Click to expand...
Click to collapse
Everybody has this problem because the card seems not capable of more speed.
But it seems nearly nobody cares.
My old thread about his, no answers:
http://forum.xda-developers.com/showthread.php?t=524272
str0nz0 said:
Everybody has this problem because the card seems not capable of more speed.
But it seems nearly nobody cares.
My old thread about his, no answers:
http://forum.xda-developers.com/showthread.php?t=524272
Click to expand...
Click to collapse
Stron,
Hmm, interesting. The only reasoning I can think of is that perhaps there's a limiting factor in order to reduce the heat or something? I don't see why they would cap the speeds.
Cheers.
What if it is capable of connecting at 54 Mbit, but can actually do only 11 Mbit? Nice trick. I hope it is just a bad idea.

can i use with a 802.11N router

hi all i have read that the htc hd2 with a reg edit can run wireless N but is this true, can i use with with a 802.11N router, or will it only work with a 802.11G router,
i need to know as i plan to buy a long range router for work so i can stream DI.FM radio to my htc from my pc and the distance is around 50meter so i want to buy the bets possible router so i can listen to the radio glitch free
info on work network:-
1) 6mb speed via a cable
2) approx 50meters from where i walk / work
It might work at 802.11N standard, but unless your broadband speed is greater than 54Mbs then you'll have nothing to gain. Your router should be backwards compatible to allow 802.11G connection which the HD2 definitely supports, this should be good for speeds up to 54Mbs dependant upon your connection quality.
You'd still get the benefit of greater range, which would in turn mean you'd get a stronger connection. Even a really strong wifi connection on my PS3 only gives me about 700KB/s, despite being on a 20Mb connection (which I can use fully on my wired PC).
I do think, however, that 50m is somewhat optimistic, despite the claims of how good the signal should be (I believe it claims to do 250m outdoors!)
I'd love to try this myself, but don't have a wireless-N router, so can't. I'd be very interested to hear how you get on with this.
Works with ~700kb/s*
I was sending data between laptop and phone with wifi only.
well im going to take my THOMSON TG585v7 i have for my home internet to work i got it with my bethere internet, for free of the provider so im going to try it and see what i get with this,
i have no idea how good this router is though
http://www.thomsonbroadbandpartner.com/dsl-modems-gateways/products/product-detail.php?id=161
it says Typical Indoor coverage: 60m
î use a BELKIN N1 http://www.belkin.com/pressroom/releases/uploads/07_11_07N1Vision.html
and my HD2 has no problems connecting
webjunky said:
î use a BELKIN N1 http://www.belkin.com/pressroom/releases/uploads/07_11_07N1Vision.html
and my HD2 has no problems connecting
Click to expand...
Click to collapse
how far indoors do you get a signal
router is downstairs and even when i'm upstairs i still get signal
Same. Got a Linksys WRT610N. With N-band enabled, not only is the signal strength better, but surfing the net and leeching YouTube vids just flies even though the Internet connection itself is only 12Mbps.
ok all ive decided to buy this for my work to send a N signal to my phone
http://www.scan.co.uk/Products/Edim...multi-function-wireless-access-point-repeater
my broadband speed is only 6mb at work but i just need the range so i hope this will get me at least 50meters walking distance lol.
Seems to only have 2 (small) antenna's though.
My Asus WL500W has 3 antenna's and has a great signal; whole house and garden covered.
http://www.asus.com/product.aspx?P_ID=nrsjewu78wdDXMOA
Running DD-WRT this beauty does it's job very well.
You could, if the signal is not strong enough or has to get through walls, consider getting a directional antenna to hook up to your router.
This will greatly increase the range.

Categories

Resources